Need help to terminate the local process chain

hi
Master DATA attribute local process chain was triggered twice in our daily master process chain. it is showing twice in the logs.
Can any one help us to terminate the one replica of the running master data attribute local process chain.
Thanks much in advance
Raj
Edited by: Gangaraju Eegu on Dec 10, 2008 3:03 PM

Hi,
Please check in execution selection any periodic job is running twice, so remove there.Double click on first node i.e. start and > Chamge Selections> Periodic Values.
Or
Find any event is triggering twice in a day?. and tehn cancle it.
Thanks
Reddy

Similar Messages

  • How to change local process chains job priority to A?

    hi experts,
    there are process chains are running in BW production system.
    for independent process chain when i forcefully change JOB PRIORITY from C to A last night it was executed successfully with PRIORITY A, but whereas i have meta chain in that there are some local process chains, though i forcefully change the JOP PRIORITY in PRODUCTION TO A, still those local chains were executed with JOB PRIORITY C only.
    Can you tell me the reason and solution to change the local process chain as well with JOB PRIORITY A.
    The metachain with JOB PRIORITY shows my userid, and the local chains shows BW_USER id.
    Regards
    venuscm
    Edited by: venu WAD on Nov 18, 2011 6:37 AM

    Check what's job priority for particular cube in TA RSRT->double click on your chain->menu Process chain->Attributes->Job Priority. Via this you can set priority as you need.

  • Local Process Chain

    Hi Friends !
    We have one "Main Process Chain' within the main process chain there is a "Local Process Chain". Main PC is scheduled at 2 PM.
    Ques : For the Local Process Chain, will the start variant be "Immediate"? Please advise.
    With Regards
    Rekha

    Rekha,
    There shouldn't be any problem even the local chain is set to "Immediate". it all matters with the Meta chain, the subsequent local chains are taken care during the Meta chain run.
    In the scheduling option of the Local chain start variant ,you can select either of the options Direct or Start using metachain.
    We have Direct shceduling for our local chains(with in the Meta chain) and there has been no problem.  this will be an advantage to maintain with the option "Direct shceduling", so that whenever you want to run the local chain seperately, there will not be any need to change any setting. else if you use "Start Using Meta chain or API", each time you have a need to run the local chain the setting has to be changed to "Direct shceduling" before executing it.
    Regards,
    Sudheer
    Edited by: Sudheer Kumar Kurra on Oct 17, 2011 9:30 AM

  • Local process chain is Removed from schduling

    Hi firends,
    when i try to schdule my global process chain whats
    happening is
    saying that:
    1.version 'm' of chain zprocess_stor was saved without
    checking
    2.version 'A' of chain zprocess_stor was saved without
    checking
    3.chain is removed from scduling(means local chain)
    i saved the local process chains,global process chains and activated also
    but agian it is giving the same error,
    can anyone plz give me solution urgent for me
    Regards,
    gunasekhar

    Hi Gunasekhar,
    Before activating try checking the process chain. the process chain may have some errors.
    Hope it helps.
    Regards,
    Parth.

  • Local process chain is removed from global chain

    Hi firends,
                     when i try to schdule my global process chain whats
    happening is
      saying that:
             1.version 'm' of chain zprocess_stor  was saved without
    checking
             2.version 'A' of chain zprocess_stor  was saved without
    checking
             3.chain is removed from scduling(means local chain)
                        i saved the local process chains and activated also
    but agian it is giving the same error,
                             can anyone plz give me solution urgent for me
            Regards,
      gunasekhar

    Hi Gunasekhar,
    Check in system log for the job to see why the background process is being removed. If the issue is unique job count, check sap Note 784969 - The RSBTCDEL2 program and sap Note - 942804
    this should help solve this issue.
    Chandra M

  • Local Process Chain question

    Dear Experts,
                   A small quick question. If you have a local process chain, does it just create a dependency or does it execute the local process chain?
                   We have a Master data process chain and another chain that loads transaction data. These 2 chains are different chains. Now what we want is to create a dependency. If I include the Master data as a local process chain, does it load the master data again?, which we don't want or just create a dependency saying that the transaction data starts only after the local chain status is complete?
    Thank you.
    Message was edited by: Visu Venkat

    Hai Bhanu,
                    Thanks for the reply. We have the Master data chain running from a long time every day and the master data I need for my chain is part of it. We made another process chain for Transaction data that needs dependency on the master data thats part of the loading in the first chain. We don't want to control or change anything in the first chain as there are many other objects and other dependencies with other chains. Now if I include that whole Master data chain in my process chain and execute mine, does it execute the Master data chain also(the Master data chain is generally already executed by the time the second I mean transaction data chain start). So, in this case, is using the Master data chain as a local chain advisable?
    Tahnk you very much.

  • Local Process Chain becomes inactive

    Hi BWers,
    We are having problems with our process chain wherein one of the local process chain becomes inactive. Here's the job log of the BI_PROCESS_CHAIN job. Will give points even for those who can give hints, better if solved.
    1. Job started
    2. Step 001 started (program RSPROCESS, variant &0000000753000, user ID BATCH_AP1)
    3. Version 'M' of chain YWAR_MPC_INTERRUPTS_MD_TD was saved without checking                
    4. Chain Is OK       
    5. Version 'A' of chain YWAR_MPC_INTERRUPTS_MD_TD was saved without checking
    6. Object with runtime number                          0' not defined
    7. Job cancelled after system exception ERROR_MESSAGE
    Thank You in advance!

    Hi
    you have pasted the process chain log, as the process was terminated, i required the dump information from the st22 and system messages from the sm21 concerned messages.
    Please provide the above infomation to resolve your problem.
    Regards
    Anwer Waseem
    SAP BASIS

  • In installation process of Acrobat Professional 7 , its showing that Adobe Pdf printer is not Installed...need help to install the software completely

    In installation process of Acrobat Professional 7 , its showing that Adobe Pdf printer is not Installed...need help to install the software completely

    If it is Win 7 or later, the Adobe PDF printer for AA 7 will not install and AcroTray will not function. You will have to install a PS driver from Adobe or maybe an HP color PS printer driver. Then edit the driver properties and change the name to Adobe PDF and the port to FILE. You will always have to do an extra step in creating PDFs by opening the file that is created in Distiller to get the PDF.
    If you are talking about Win 8, you may not be successful at all. If you got Acrobat and Distiller to install, then there is a chance.

  • How to trigger a local process chain to run manually

    Dear Experts,
    In my company, I have a Daily process chain.
    In this Daily process chain, it contains many other local process chains which are grouped by modules.
    For example, I have created the following 3 process chains:
    - Accounts Receivables Process Chain which contains all the required process for loading FIAR data.
    - Accounts Payables Process Chain which contains all the required process for loading FIAP data.
    - Inventory Process Chain which contains all the required process for loading  Stocks data.
    These 3 process chains are scheduled one after the other in the main process chain which is called Daily Process Chain.
    FIAR needs to be successful before FIAP can run and Inventory chain will run only after FIAP is successful.
    Normally it runs without any problems.
    But recently, when the previous chain is successful, the next process chain does not get triggered to run.
    In the end, I have to manually execute the remaining process chains to start running.
    With this, all data are loaded, but the Daily Process Chain status for the day is yellow because it is not complete.
    Is there a program or method which I can execute or use to trigger the process chain to continue to run in the Daily Process Chain? If there is, please let me know so that I can avoid having to run the process chains manually one by one.
    Thanks in advance for your help.
    Regards,
    Shunhui.

    Check thid thread with the similar issue:
    Process Chain - Node untriggered.
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains

  • Local process chain not getting started

    Hi guys ,
    we have a composit chain which ran 3 local chain when it comes to 4th local chain its says BI_PROCESS_CHAIN is ok
    but its not starting when we see in the sm37 is says folloing things
    Job started                                                                        
    Step 001 started (program RSPROCESS, variant &0000001009590, user ID BWEXTRACT)    
    Communication buffer deleted from previous run 487JGCGX7IC6WJ3SE6QEGFH2O (status X)
    Version 'M' of chain IMPCB022 was saved without checking                           
    Chain Is OK
    can any one help me
    thanks
    dp

    Hi DP
    Since the local chain is not started, it seems that that is not active.
    Goto local chain which didn't get started, check for jobs by context menus ( show all jobs) and if you find a job in released state that means chain is active and it should run, but if you don't find any chain in the released state that means you need to activate and schedule 4th local chain again.
    Once you do that, then you need to activate the final parent chain also.
    Please try to do this and then if you need you can start the local chain directly by repeating the process from there itself.
    Cheers
    Vishal

  • Help me to Create this Process Chain

    Hi Gurus,
    We have 3 Process chains,
    1) Region 1
    2) Region 2
    3) Region 3
    These three process chains were start at differt times and end time will depends upon the load of data. Now i want to do some manual calculations after the successful execution of this chains. So i have written three ABAP programs to do that calculations for 3 chains.
    My scenerio is to create a new chain only so I have created a new chain with Start variant -> Decision variant -> 3 Program variants (For 3 chains)
    Now i want to write the condition in decision variant to attach the respective program variants below it. ie,
    Start -> Decision (Condition for successful execution of Chain Region 1) -> Program Variant 1
                 Decision (Condition for successful execution of Chain Region 2) -> Program Variant 2
                 Decision (Condition for successful execution of Chain Region 3) -> Program Variant 3
    So i don know what exact logic to write in Decision variant...Please help me here...
    Thanks & Regards,
    Balaji.S
    Edited by: sbalajigupta85 on Aug 26, 2010 7:47 AM

    HAI ,
    A process chain is a sequence of processes that are scheduled to wait in the background for an event. Some of these processes trigger a separate event that can, in turn, start other processes. It looks similar to a flow chart. You define the list of Infopackages / DTPs that is needed to load the data, say delta or Full load. Then you schedule the Process chain as hourly, daily, monthly, etc, depending on the requirement 
    process chains for which info providers ?? i mean to say... for cube or? DSO?
    ok now below i explained for DSO... try it out it will work.. 100%
    Step 1: Go to RSPC transaction. Click on Create. Give Process chain name and Description.  
    Step 2:  Give the Start process name and description and click on Enter  
    Note: Each process chain should start with a Start Process  
    Step 3: The next screen will show the Scheduling options.  
    There are two options:
    Direct Scheduling:
    Start Using Meta Chain or API  
    In my example I have chosen Direct Scheduling as I am processing only one chain i.e DSO. Click on u201CChange Selectionsu201D  
    In the below screen shot, you can give the scheduling details i.e the Immediate, Date& time etc. and click on SAVE  
    The Screen shot below indicates that we have started the process. 
    Step 4:
    Click on the icon process types as shown in the below figure. You will get a list of options.
    In my example I am scheduling for DSO. To process we need to have InfoPackage, DTPu2019s for the corresponding DSO
    Open the tree Load Process and Post Processing, We need to drag and drop u201CExecute InfoPackageu201D  
    Step 5: Once you drag and drop the u201CExecute infopackageu201D we get the below Popup. We need to keyin the Infopackage name. To do this click on F4 and chose your Infopackage and click on ENTER
    Step 6: Save + Activate and Execute the Process.

  • Local Process Chains

    HI Guys,
    I am in the process of designing the process chains for data loading. I have a situation where I am planning to use local process chains in the meta chain. Situation is like this:I have created Meta Chain for Master Data loading, which is having 2 local process chains, one is for Attributes and another is for loading texts. I placed them in the sequential order. First Attributes chain and on successful completion of Attribute chain it should run the Text process chain. But in the system it executes the Attribute chain successfully but the text process chain is always in the YELLOW( in progress ) state even though in that process chain I have only start process. In the SM50 it shows two background process with the user id ALEREMOTE, but process chain never finishes. In the Messages of the Text process chain I see the message"Communication buffer delted from the previous run ".
    So I put the process chains in the parallel manner, meaning after start process of Meta chain I attached the two process chains so that they should execute simultaneously. But in this case too, Attribute local process chain gets executed but not the Text local process chain.
    We tried debugging the process in SM50, it seems that there is some infinite loop.
    If anybody has any clue then please reply back at your earliest. Your help is highly appreicated,
    Thanks.
    Santosh Taware

    first point, i think you can have single process chian for both attributes and texts one after other.
    second thing check in st22 if any dumps are occuring and check in the monitor in which step it is still running.
    reward if helps.

  • How to activate the deleted Process chain

    Hello Experts,
    Unfortuantely we have deleted few process chain by in RSPC .But we are in need of this Process chain . Could you please let us know whether there is any possibilties to get back the deleted process chain .
    Please let us know where the deleted process chains are stored in the system.
    Many Thanks for your Help.
    Regards,
    Kumar

    Hi,
    you can restore it from a backup or in case the chain was transported from one of the target systems or the development system. No other way.
    regards
    Siggi

  • Terminate the Signature Process

    My form has several fields which need to be validated, and the only event in which it makes sense to do the validation is the Enter event of the Signature Field.  But if the validation fails I don't know how to terminate the signature process.  It keeps going after the validation script.  I don't want to rely on the user hitting Cancel.  Is there a method to terminate the signature process?  Thanks.

    Hi,
    There is a cancelAction method which you can use with a preSign event.
    You could validation script in the preSign event and then if this fails you could use:
    Reference_Syntax.cancelAction = true;
    I would also include an app.alert to notify the user why the signing has failed.
    This was implemented in XFA2.8, which means that it is likely that it will only work in Acrobat / Reader version 9. This might be a limit to you.
    I haven't used this, so you should check out the help file.
    Good luck,
    Niall

  • Schedule local process chain

    Hi, I have a requirement to schedule local PC to run every 8 hrs instead of daily as it does now.  Local process chain is called within a meta chain.  Is there a way I can schedule local process chain separately within a meta chain or I have to change schedule for the entire meta chain? 
    Thanks!

    No need to change schedule for the entire meta chain. U should schedule local process chain separately.
    For local chain change mode
    Right click 'Start Variant' -> Maintain variant -- Direct Scheduling -- Change Selections
    Enter Date/Time... Select periodic Job
    Periodic Values -- Other period -- enter 8 for Hour(s)
    If u r using company calender -- Select 'Restrictions' -- enter Calender ID
    Save -- Activate - Schedule
    Local PC will run for every 8 hrs from the time u specified, and also run in metachain (once in a day if metachain runs daily)

Maybe you are looking for