Need help to understand INSTALL command based on GPspec 2.1.1

Hi Friends..
Sorry before, i couldn't understand some commands based on GPSpec 2.1.1, i'm pretty new in this field..
So, i need your help to help me understand about the commands..
Firstly, i want to know what exactly the DATA that referred by INSTALL Command..
here's outlined in the GPSpec 2.1.1 for INSTALL Command (Chapter 9)..
CLA = '80' or '84'
INS = 'E6'              //INSTALL
P1   = 'xx'               //Reference control parameter P1
P2   = '00'               //Reference control parameter P2
Lc   = 'xx'                //Length of data field
Data 'xxxx'           //Install data (and MAC if present)
Le   = '00'What exactly the data referred?.
I thought the data which referred can be Applets, Packages, CAP files..
So, how to know the LC and Sequence bytes of the Applets/ Packages/ CAP files..
i found this LINK..
In the website i read an example of INSTALL Command..
Here's an example mentioned in the link above..
INSTALL FOR LOAD
84 E6 02 00 2B 10 A0 00 00 00 18 50 00 00 00 00 00 00 52 41 44 50 00 00 0E EF 0C C6 02 00 00 C8 02 00 00 C7 02 00 00 00 2A 8B 3A 01 3C 8E FD A4 (00)
00, 90 00 [Normal ending of the command.] Sorry, i'm still not understand about it..
Please help me regarding this..
Sorry, perhaps this question sounds silly..
Thanks in advance..

Hi,
As a hint, you want to use INSTALL for install and make selectable. You can have a look at the APDU that GPShell sends through for the final install command (hint: it will be a part of the load command). You can also execute install_for_load, load and install_for_install in GPShell to see these commands. The GP card spec is a little confusing for the INSTALL command so tracing GPShell may help you understand it.
Cheers,
Shane

Similar Messages

Need help in understanding the error ORA-01843: not a valid month - ECX_ACT

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thank

revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

I need help in re-installing my Adobe Acobat XI Pro

I need help in re-installing my Adobe Acobat XI Pro

What is the current situation that says you need to reinstall? What OS?

I need help in understanding the customization of Landscape in R/3.

I need help in understanding the customization of Landscape in R/3. Setup of SAP Landscape from an SAP SD point of view. Being as SAP SD consultant what would be my role in customizing the Landscape server. Help needed. Thx

Hi,
In a standard SAP project implementation, the 3 standard transport procedures are:
Development System (DEV) --> QA System (QAS) --> Production System (PRD)
In the above structure, the Training Client (TRN) could be made from the copy of PRD (after when real-time master data has been available) or from QA system (where configuration has been tested in DEV client, and the master data is uploaded manually for training purposes)
Sandbox (standalone): This can be refreshed with Golden Client to reflect the latest configuration performed to facilitate the development/testing purposes.
-Development (DEV): Where all system configurations and development activities are carried out.
-Quality Assurance (QAS): Where functional testing is carried out. The System Integration Testing (carried out by the -Development Team) and the User Acceptance Testing (carried out by XXX appointed personnel) is carried out in this server.
-Training (TRN): End Users are trained on this server.
-Production (PRD): After the System is commissioned all data entry and administrative functions will be carried out in this server.
This is by far the standard landscape architecture that is adopted and practiced in most implementations.
Hope the above helps.
Thanks.

I need help with re installing my apple account for itunes.

Had problems with my itune account, so I uninstalled and now need help with re-installing the program with the songs I have already purchased.

Your iTunes account is something at the iTunes Store online. It is not possible to uninstall it. Do you mean the iTunes application? Even if you delete the application and restore it, it should not have deleted your iTunes library (essentially the contents of the iTunes folder in Music) on your computer unless you did a separate steep and specifically deleted that too. You need to tell us what it was you deleted.

Need Help Automating (Silent Install) and Serializing PSE 12. Installation (Volumn License)

I am trying to automate and serialize a silent installation for PSE 12. I have a volume license for 50 users. The old Silent Install command (PSE 11) no longer works for a silent install (PSE 12). I need this routine to suppress the EULA and any other user interaction required. Additionally I need the installation to NOT require end users to Login using an Adobe Digital ID.
I've attempted to try the "Solution" found here: http://forums.adobe.com/message/5945374 . So far I've been unsuccessful. Here are the steps I've taken thus far.
Copied install files to a network drive.
Installed PSE 12 on a local Computer and using the Volumn Serial Number and Registered the program.
Downloaded the latest version of APTEE.
I've ran Ran the following on the registered computer successfully with a return code of 0: adobe_prtk.exe --tool=VolumeSerialize --generate --serial=<<Volume SN>> --leid="V7{}PhotoshopElements-EMT12-Win-GM" --regsupress=ss
The following failed with a return code of 19 and an error messager of Could not find prov.xml: adobe_prtk --tool=VolumeSerialize --provfile="absolute path to prov.xml"
Please help.
Thank You

Toadpole wrote:
They informed me that it's impossible to do a silent install and surpress the EULA.
That seems at variance with the example code in the links I posted:
Have you gone to chat via the Volume Licensing support page - http://helpx.adobe.com/x-productkb/policy-pricing/avl-help.html. There is reference on that page to the Enterprise Deployment Forum (it seems more geared to Cloud subscriptions, but there are people posting Elements questions).
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Need help on understanding COLUMN_IID, COLUMN_ID and ROW_IID

Dear All,
I need some help in understanding the below three things.
COLUMN_IID, COLUMN_ID and ROW_IID
First let me write down the requirement :
I need to keep track of the scores on various status change.
In the design of the template, we have something called 'Company Objectives' and 'Team Objectives' and 'Individual Objectives'.
And under every heading, there are some objectives and a score beside it.
When the document is with the employee, then he/she decides the score (0-Not started and 5-Completed). And when the employee submits the document then it goes to manager. The manager may change the score against an objective.
Now, the requirement is with every change of status and substatus, i need to take a note of the score. Is this value stored in any standard table. I checked the table HRHAP_FURTHER but i cannot
When i check the Function Modules 'HRHAP_DOCUMENT_GET_DETAIL' and 'HRHAP_DOC_FURTHER_READ', then i see those values but against various ROW_IID and COLUMN_IID and COLUMN_ID. I need to know how to catch the ROW_IID and COLUMN_IDD and COLUMN_ID for a particular objective. And what is the concept of the ROW_IID and COLUMN_IID and COLUMN_ID.
Please let me know if something is not very clear. I will try to give some more explaination.

Hi,
For the context, in case it was not clear in the original message, we are talking Performance Management.
As you know the documents are based on appraisal templates. On document create this template is read and the different elements are generated. As we can have the same element type/id multiple times in a template/document we need something to uniquely identify them. This is done via the ROW_IIID.
Then for each element we can define which columns we use. A column is identified with COLUMN_ID, which i9s unique when we are on template configuration level. But on document level this is not the case. Due to the Part Appraiser columns (PAPP/PFGT) being multiplied by the number of part appraisers in the document the COLUMN_ID is not unique anymore. So we need to give them also a unique ID, which is the COLUMN_IID.
Thats the short answer, I will write a longer document on it one of these days in my blog.
Regards and Groetjes,
Maurice Hagen

Need help to understand about cluster

Hi,
I am a SQL developer, and need a little help to understand what clusters are. I never came across to create any cluster. Can someone plz help me with simple example, what is cluster and in which situation we create cluster?
Thanks
Shantanu

>
I am a SQL developer, and need a little help to understand what clusters are. I never came across to create any cluster. Can someone plz help me with simple example, what is cluster and in which situation we create cluster?
>
A cluster is used to store data from more than table together. The data would typically share the primary key. For example the scott DEPT and EMP table data is related based on the DEPTNO value so DEPTNO could be the cluster key.
If you created a cluster and then created copies of those tables in the cluster (e.g. myDEPT and myEMP) Oracle would store the dept and emp data for the same DEPTNO value together, even in the same block.
Then when you query dept and emp data using DEPTNO it will be faster to retrieve the DEPT and EMP data for that department since it is colocated in the same blocks.
The drawbacks are that when you only want data from one of the tables (e.g. emp) Oracle has to skip over the DEPT data since some of it will be in the same blocks that the EMP data is in.
So clusters and clustered tables are most useful when you always query multiple cluster tables using the cluster key. For some other operations they can be very inefficient.
See the Admin Guide for an example using the DEPT and EMP tables
http://docs.oracle.com/cd/E11882_01/server.112/e25494/clustrs003.htm#ADMIN11747

Need help for understanding the behaviour of these 2 queries....

Hi,
I need your help for understanding the behaviour of following two queries.
The requirement is to repeat the values of the column in a table random no of times.
Eg. A table xyz is like -
create table xyz as
select 'A' || rownum my_col
from all_objects
where rownum < 6;
my_col
A1
A2
A3
A4
A5
I want to repeat each of these values (A1, A2,...A5) multiple times - randomly decide. I have written the following query..
with x as (select my_col, trunc(dbms_random.value(1,6)) repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
It gives output like
my_col lvl
A1     1
A1     3
A1     5
A2     1
A2     3
A2     5
A3     1
A3     3
A3     5
A4     1
A4     3
A4     5
A5     1
A5     3
A5     5
Here in the output, I am not getting rows like
A1     2
A1     4
A2     2
A2     4
Also, it has generated the same set of records for all the values (A1, A2,...,A5).
Now, if I store the randomly-decided value in the table like ---
create table xyz as
select 'A' || rownum my_col, trunc(dbms_random.value(1,6)) repeat
from all_objects
where rownum < 6;
my_col repeat
A1     4
A2     1
A3     5
A4     2
A5     2
And then run the query,
with x as (select my_col, repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
I will get the output, exactly what I want ---
my_col ....lvl
A1     1
A1     2
A1     3
A1     4
A2     1
A3     1
A3     2
A3     3
A3     4
A3     5
A4     1
A4     2
A5     1
A5     2
Why the first approach do not generate such output?
How can I get such a result without storing the repeat values?

If I've understood your requirement, the below will achieve it:
SQL> create table test(test varchar2(10));
Table created.
SQL> insert into test values('&test');
Enter value for test: bob
old   1: insert into test values('&test')
new   1: insert into test values('bob')
1 row created.
SQL> insert into test values('&test');
Enter value for test: terry
old   1: insert into test values('&test')
new   1: insert into test values('terry')
1 row created.
SQL> insert into test values('&test');
Enter value for test: steve
old   1: insert into test values('&test')
new   1: insert into test values('steve')
1 row created.
SQL> insert into test values('&test');
Enter value for test: roger
old   1: insert into test values('&test')
new   1: insert into test values('roger')
1 row created.
SQL> commit;
Commit complete.
SQL> select lpad(test,(ceil(dbms_random.value*10))*length(test),test) from test;
LPAD(TEST,(CEIL(DBMS_RANDOM.VALUE*10))*LENGTH(TEST),TEST)
bobbobbobbobbobbobbobbobbobbob
terryterry
stevestevesteve
rogerrogerrogerrogerrogerrogerrogerrogerrogerYou can alter the value of 10 in the SQL if you want the potential for a higher number of names.
Andy

Need help in understanding FA acquisition via Internal Order

Hi Gurus
I need your help in understanding the FA acquisition via Internal Order. The process we are following is that we create AUC using the AUC asset class and enter that AUC number in the settlement rule while creating IO. Once IO budget is approved, we release the IO. Once GR is completed, we do the Invoice receipt for the PO, followed by settlement of IO against the AUC. Afterwards, we create fixed asset in AS01 and enter this asset number in the settlement rule for the AUC in AIAB and settle the AUC to Fixed asset for the costs.
My question is that during all this process, I don't see the PO information in the AUC record. When I display AUC, under the Enviornment tab, I see the Purchase order link but when I click it, there is nothing in there. The reason could be that we are creating AUC seperatly and not from within the IO where it says create AUC. I am not sure what is the best way for the whole process.
I would be thankful if you can guide me.
Thanks,
Shalu

Hi
Can someone please help me with this issue?
Thanks,
Shalu

Need help with a terminal command

Ever since Lion, or maybe even earlier, I am fighting a losing battle against memory leaks on my MacBook Pro. Safari for example takes over time 2GB+ for just 2 or 3 tabs open with almost no extensions active. Really strange.
Someone told me about the "purge" command in Terminal to free some of the sequestered memory, so I am doing this a few times a day to be able to use Photoshop, Keynote, Premiere and other stuff concurrently without opening and closing apps like I did 10 or 15 years ago, remember those days?
So here are my 2 questions:
Will this frequent "purge" command harm anything in the long run?
If no, is it possible to automate this "purge" Terminal action somehow? Maybe a desktop icon to click, or fully automated? I am a designer, not a coder, so I would need help with that.
Thank you for your input!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27

Hello, do any modifier keys work, like Optio/alt?
Could you have Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php

I need help in re-installing Photoshop Elements 12 on my hard drive.

I need help in installing Photoshop Elements 12 on my hard drive. While trying to install program, I get a message that reads "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation"
I have no clue what this means , all I want to do is re install program on my hard drive.
Any suggestions ?

Kglad
I clicked the link you supplied and still can't figure out how to attach a screen shot.
However I found out that I did leave out a part of the screen shot message when I
I sent it to you. Here is the message in full. The part I left out is in bold. The reason
I missed it is that it was in the top of the blue border surrounding the text.
Licensing for this product has stopped working
This product has encountered a problem which requires that you restart your
computer before it can be launched.
If you continue to see this message after restarting your computer, please contact
either your IT administrator or Adobe technical support for help, and mention the
error code shown at the bottom of this screen.
This is the total message verbatim, If this does not help I thank you for trying.
Dougbrurob

I need help hoe re-install my photoshop CS5 in my laptop

I need help How to re-install my photoshop CS5. I lost it after reboot my laptop

You should be able to find the installation file to download, along with your serial number by logging on to your Adobe account, providing you registered it originally. You are allowed two activations at any one time, but you will have lost one unless you managed to deactivate CS5 before the crash, (which seems unlikely).
If you have already used two activations, you'll need to contact Customer support and ask them to reset it for you. Be warned they are busy at the moment, so you may have to wait a while on the phone.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

Need help to understand INSTALL command based on GPspec 2.1.1

Similar Messages

Maybe you are looking for