Need help turning off WPA!! on MI424WR-GEN3I

Question

Hi,
I cant seem to turn of WPA on the router. I have it on WPA/WPA2 resulting in speeds of 56MBps. Simple fix to turn off WPA but I am not sure how to.
Anyone with ideas please?

Answer 1

The OP needs to use WEP to connect some legacy equipment to his network which aparently won't support WPA2 encryption.
My suggestion still is to purchase/ beg an older G only router and set it up as an AP and then connect only the cameras and DVR to it either using WiFi or Ethernet.
PROS:
1.  This will give you the WEP security you need.
2.  By having the cameras and DVR connected on this AP you won't slow down N capable devices which can connect to your primary network.
3.  Devices connected to your primary network will be protected by WPA2, but there is a big but
CON:
1.  By having an AP using only WEP someone can easily gain access to your network.   The best thing you can do to prevent this is double NAT the second router behind your primary which will result in any devices connected to it being in their own subnet with no access to the primary network.  This however may result in it being much more difficult acessing the cameras remotely.
2.  If you choose not to double NAT then enable every security feature you can on the second router which will delay and discourage script kiddies but not stop a real hacker intent to gain access:
a.Long as possible  and secure WiFI encryption on WEP.    
b. very secure administrative password.
c. Block administrative access by WiFi
d. Allow only certain IPs to administer the router
e. Block remote access to router
f. Give only the MAC addresses of devices that you want to be able to use the second router access by WiFi.
g, Monitor the system logs so you can tell if your router is under attack