Need help turning on hp Pavilion dm1-3000 integrated webcam?

The webcam won't show up in device manager, and hp won't let me download any drivers for my notebook because it says the program is already being used by a local device or something like that. How do I turn on my integrated webcam?

Your System is Origin From Factory?
Click in Start Menu > Control Panel > Category (In the up-right) > Small Icon.
Search > Device Manager.
In the Network has something Unstalling?
Shutdown your computer and press the Key ESC a lot times when you start.
Showed: Start Up Menu.
Click in F10 BIOS setup.
Click in F9 Load Setp Defaults > Enter Yes.
Click in F10 Save and Exit Changes.
Install this UPDATE
BIOS:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113123-1&cc=us&dlc=en&lc=en...=
Network:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111716-1&cc=us&dlc=en&lc=en...=
Att Cristian
If this answer help yu click in Kudos to Tanks.
Tank You
If this answer help you click in Kudos to tanks.
If you don't have more question click in Accept as Solution to close this case.
Best Regards Cristian Derick.
Senior Support Analyst.

Similar Messages

  • I need help turning on my apple Ipod device i locked myself out

    I need help turning on my apple Ipod device. i have locked myself out.

    If problem try the items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar      

  • I need help turning on my iPhone

    i need help turning on my iPhone

    See Here for  >  Frozen or unresponsive iPhone
    Try this First... No Data will be Lost...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Need help with upgrading my Pavilion's graphics... affordably

    Hi all,
    New member here :-).
    Ok...I am having trouble with a graphics card I just got. It's the EVGA GeForce GT 730 2GB GDDR5 64bit DVI/HDMI/VGA Low Profile Graphics Card 02G-P3-3733-KR. It's a very good entry level card according to every one I've talked to. It was reasonably priced so I bought one. When I installed it all I get is an amber power light and beeping sound. So I contact EVGA to see if it's incompatible with my computer model. This is what they said: "We do apologize for any issues with your GT 730. Your hardware should be sufficient to run the graphics card; however, you will need to remove any ATI/AMD software or drivers prior to installing our NVIDIA based graphics card, as this can cause driver conflicts. Although this graphics card does not require a UEFI motherboard BIOS, you may want to check with HP to see if this system can run 700 series NVIDIA graphics cards." Sooo... based on that last part I underlined, can this computer run that model of card?
    Oh... another note: I guess the card could be defective too. I always seem to get the dud of the bunch if there is one. LOL. If that's the case I'll mail it back to Amazon.
    My official warranty support has run out so you're the only guys and gals that can help me with this. Any info or advice will be greatly appreciated. Or if you can recommend any other graphics card upgrades that would work, that would be awesome too. Thanks so much in advance!!!
    Just in case you didn't see it up top, the make and model is Pavilion P6-2120 H2M53AA#ABA.
    Patrick

    Hi,
    Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance.
    The quote about removing AMD drivers from EVGA seems to be bogus.  I have multiple EGVA graphics cards and none of the printed directions ever mention removing AMD drivers.  I have run and removed AMD and NVIDIA graphics cards without having to remove the previous drivers.
    If your PC doesn't have a version 8 BIOS then the NVIDIA 7xx graphics cards may not work.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Need help turning off find my phone

    I Purchased an iphone4 from a couple and later found out that in order to install apps that I need their account password. I texted them and they said they didn't remember it. They said to contact apple and give them the info they used when they purchased and registered the phone. They gave me the info but where/how do I use the info to turn it off so I can delete the account. I have the phone activated and  am using it but want certain apps and want to add my music library but can't. Thanks in advance for your help

    You will not be able to use this iPhone if you don't get them to sign out of their Apple ID with the appropriate Password.  If they forgot their Apple ID and Password they can go online and correct things but they will need to answer their Security Questions and also may need to receive information on their Recovery email Address.  This can all be done relatively quickly, but they will need to cooperate. 

  • Pls i need help for audio driver for lenovo 3000 j series

    hello, can sombody help me to find driver for lenovo 3000 j series audio driver.
    i did format to my computer and reinstall windows XP and now i don't have audio, i already downloaded all drivers from lenovo website and nothing is working. pls pls help. thank's. 

    If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.

  • I need help turning it back on.

    My nano, once turned off, does not turn back on unless you reset the whole this.(holding menu and the middle button for 6 sec.) Does anyone know how to fix this. I've tried reinstalling everything, and I have the update. Any other idea's?

    You should only need to press the Menu button to wake the iPod up,
    Press any button to turn it on. It does not need to be the Menu button.
    My nano, once turned off, does not turn back on unless you reset the whole this
    If it has been off for ~18 hours, it will take a few seconds to turn back on.

  • I need help turning off the "find phone" on my 4G iPhone, but don't have the phone to get the serial number

    I am looking for direction on how to turn "OFF" find my phone.  I do not have the phone or serial number.

    Remove it from your account by signing in to icloud.com/find,
    selecting the device, and clicking Erase. When the device has been
    erased, click Remove from Account.
    You do not need the serial number to do this, but you may
    be able to find the serial number here:
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    Scroll down to the section on getting information from your computer.

  • Need help turning off WPA!! on MI424WR-GEN3I

    Hi,
    I cant seem to turn of WPA on the router. I have it on WPA/WPA2 resulting in speeds of 56MBps. Simple fix to turn off WPA but I am not sure how to.
    Anyone with ideas please?

    The OP needs to use WEP to connect some legacy equipment to his network which aparently won't support WPA2 encryption.
    My suggestion still is to purchase/ beg an older G only router and set it up as an AP and then connect only the cameras and DVR to it either using WiFi or Ethernet.
    PROS:
    1.  This will give you the WEP security you need.
    2.  By having the cameras and DVR connected on this AP you won't slow down N capable devices which can connect to your primary network.
    3.  Devices connected to your primary network will be protected by WPA2, but there is a big but
    CON:
    1.  By having an AP using only WEP someone can easily gain access to your network.   The best thing you can do to prevent this is double NAT the second router behind your primary which will result in any devices connected to it being in their own subnet with no access to the primary network.  This however may result in it being much more difficult acessing the cameras remotely.
    2.  If you choose not to double NAT then enable every security feature you can on the second router which will delay and discourage script kiddies but not stop a real hacker intent to gain access:
    a.Long as possible  and secure WiFI encryption on WEP.    
    b. very secure administrative password.
    c. Block administrative access by WiFi
    d. Allow only certain IPs to administer the router
    e. Block remote access to router
    f. Give only the MAC addresses of devices that you want to be able to use the second router access by WiFi.
    g, Monitor the system logs so you can tell if your router is under attack

  • Need help turning on the wifi on my ipod touch 2ed gen?, need help turning on the wifi on my ipod touch 2ed gen?

    the wifi on my ipod is not working. i have reset the network settings and i have restored the ipod. i am not sure what to do now and help would be nice thank you

    What do you mean by not working? Can you see the networks? Getting error messages when trying to join?
    Is this your problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • I need help turning off things from my i-pod

    I have shut off all of the things I did not want any longer!  Please help me with my i-pod, and changing my password and help me to find ways to completely 'reboot' my i-pod!!
    Please help me!!
    Thank you.
    Shawn Stopper

    Look at these options:
    Credit Kappy.
    Ciao

  • HT5654 MY IPHONE IS IN RECOVERY MODE I NEED HELP TURNING IT BACK ON

    my iphone is in recovery mode. the screen has the itunes icon and a USB picture with an arrow pointing up! i can not access my phone at all! i tried to turn it off and back on. nothing. what options do i have and how do i fix this?

    Do as the image on the screen suggests.
    Connect the device to a computer running iTunes and restore.

  • Ipod stolen! Need help turning tracker on?

    I do not know where to post this. My new Ipod got stolen this saturday night. I remeber that when I set it up I remember going through and setting up a tracker of some kind. How can I activate it. Please help me.

    If your "tracker of some kind" was "Find My iPhone", see this article: http://docs.info.apple.com/article.html?path=MobileMe/Help/en/mm6b1aa045.html
    And, as already mentioned by roaminggnome, the feature had to be set up to work with your device before it was stolen.

  • Need help turning off my Ipod touch, I tried holding the power and home button, nothing turns it off.  I also cannot adjust the volume.  Can anyone help?

    Im looking for someone to help me out with my Ipod.

    Plug your iPod into your computer go to the iPod summary tab:,
    Then click restore:
    Hope this helps.
    It should fix the problem,
    but it takes about 30 minutes.
    You will have to sync your media back to your iPod.

  • Need help turning off iPhone

    Hey everyone. I have an iPhone, but something weird happened. The touch screen stopped responding, but the buttons are all working. So I tried to turn it off, but the 'slide to power off' bar came up. Problem is, I can't slide anything because my touch screen isn't responding. Anyone know a way to restart your phone without having to slide the bar? And my battery is full, so it would take too long to wait for the battery to run out.

    Hold the lock button and the home button at the same time for about 7 seconds or so and it should reboot the phone. Take the phone to the Apple store to get it checked out if this problem continues. Thanks.

Maybe you are looking for

  • File Content Conversion - Multiple KeyField

    Hi Experts, I have the following structures with 2 keyfields <Structure1>   keyfield1 - value 1   keyfield2 - value 1 <Structure2>   keyfield1 - value 1   keyfield2 - value 2 <Structure3>   keyfield1 - value 2   keyfield2 - value 1 <Structure4>   key

  • Get rid of the tab slider

    http://i.imgur.com/76w44MH.png This is by far one of the most annoying things I've encountered since I moved back to Firefox, especially since I keep a LOT of tabs open and I need to reach them as quickly as possible. I need a way to get rid of it.

  • Inherited Permisions in 10.4.6

    I can seem to get Inherited Permissions to work. Least that's what I think the issue is. The problem is on my fileserver, when clients create a folder it is created with read only access for the staff and read & write for the owner (which is the user

  • Nested Report Problem

    Hello Gurus, I have created a Classic Nested Report following Dietmar's example from: Nested report howto? I followed the steps to create the nested report: Step 1 - created the package create or replace package UNFUND_PCK as    FUNCTION get_unfund_i

  • Doubts in Redo log

    Hi, DB: 10.2.0.4 OS: UNIX/Windows I have some doubts in archive log generation. *1)* Once current redo log is filed , LGWR will move to next redo log which is available with status INACTIVE , and current one will become ACTIVE.If more archive logs ar