Need help understanding the device association

So I've been trying to understand the logic for the device association for iTunes in the Cloud, but I just don't get it, and hope someone here can shed some light on it for me. Just to clarify, I'm not talking about the computer authorization (5 computers pr account), but the max 10 devices associated pr account for automatic download and previous purchases.
I have two Apple IDs, two computers and two iOS devices. I've tured OFF automatic download on all devices since I don't want all apps to be downloaded to all devices and I want to manage that myself, but I've been downloading previous purchases on all the devices from iCloud. When I view my account overview I see that one accout is assosicated with one of my computers, but nothing else. The other account is associated with my iPad but nothing else. The "problem" is that I can download previous purchases from both accounts from both the iPad and the computer i mentioned. If I understand the device association description correctly, this should not have been possible(?) I should only be able to download previously purchased apps from the account the device is associated with right? I've also downloaded previously purchased apps from my other computer and iPhone as well without them being associated with any of the accounts.
Don't get me wrong - I'm glad I can do this, but I'm just trying to understand how the devices get associated? I don't want any of my devices to end up in a 90 day quarantine, so it would be nice to know how to avoid this.
Thanks!

Probably not of any help but my understanding was the same as yours i.e. if you turn on automatic downloads, use iTunes match or re-download past purchases then that computer or device becomes associated with that account for 90 days : http://support.apple.com/kb/HT4627
But I've seen other people post the same experience as you have, so it's not clear to me when it does or doesn't start an association. When people ask how to get content that their partner/spouse has bought onto their device I usually suggest that they copy it from computer to computer (e.g. via a flash drive) and add it to their iTunes and sync it as opposed to re-downloading it due to the potential 90 day association.

Similar Messages

I need help understanding the issues on why i can not download the latest version of shockwave player. this affecting all of my game play on any game i attemt to run.

is there anyone who may be able to help with the issues at hand? my current version of shockwave crashes at will! this is affecting any and all games i try to run. i have tried several times to download the latest version with no luck. if there is something i have done wrong, or something i have not done...please feel free to direct the right course of action.

See my response to your other question

I need help understanding the concept of Java...

Hello, this is my first post. I'm new to Java as well as programming, and I;m really having problems understanding the whole concept of classes, methods, arguments, parameters, constructors and so forth....can someone please explain this in baby terms....like a class is a big box and a method is something inside the box, or out!!!
thanks

Hi,
It looks you know nothing about programming. :)
Java is a very nice and easy programming language.
The best for you is to start programming to read a book
"Thinking in Java", Bruce Eckel. You can find it on the internet or download it from www.BruceEckel.com, or find it on www.filesearch.ru. This book will give you everything about Java. And then take any book what you like and go ahead. Practice, Practice and Practice!
Good luck!

ZPM: Need help understanding the quirks of ZPM

Does anyone have a successful implementation of ZPM in ZCM 10.3.3 running smoothly. I have been struggling with this product since December 2010, and need a little guidance around all of the quirkiness that exists.
So far I have found these elements that are inconsistent:
1. Mandatory Baselines with alot of patches to apply will spawn remediate.exe sessions in parallel. There is a hard breakpoint to only allow 4 simultaneous sessions, however sometimes, the patches don't apply at all.
2. When applying patches Windows Installer 4.5 and/or MS07 - 69, I watch it try to apply all 9 versions of the various types of patch, however the patch never successfully installs. Very strange. I assume this behavior could exist among other random patches. The patch client does not report back to the server that it failed. However, it orders the reboot to occur.
3. There is a strange coorelation between the analyze.exe and the remediate.exe if they are running together. Sometimes, the remediate.exe will spawn chaotically if the analyze.exe is processing as well. This occurs if a load block of patches are lined up for deployment.
4. The Graphs in the Patch Management system don't make any sense. I have 522 devices, and only 40 devices are reported on?
My main concern is that I do not have a guaranteed process in place that will ensure patch success. I need the following things to occur:
1. If a patch is successful, I need the server to know that it is successful. :)
2. If the patch fails, I need to see that it fails, I need the debug mechanism in the zmd-messages log to explain why it failed, so that it can be remedied.
3. I would like someday that the mandatory baseline feature works properly, and doesn't go crazy with spawning issues, because low-memory machines freeze up from all the memory allocations that occur.
If anyone is out there who successfully uses this product, please let me know, because I need to steering guidance, because the controls are not obvious on how to work them, and I would hate to abandon ship, if there are some good smart workarounds that are known.
HELP! :)

splittgerb,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Need help understanding the local caching of jnlp when creating it via jsp

I'm trying to deploy an app via Web Start. I have occasions when I need to pass arguments, so I'm using JSP to create the JNLP and optionally write arguments.
I need some help in figuring out how to cover my different use cases with as few different jnlps as possible and am confused about the local cacheing logic.
Use 1
Initial install: I pass an init=yes url param which writes a preferences file <argument> to be passed to my app. I don't want this argument cached in my jnlp, as this will overwrite the user's preferences on subsequent launches.
Use 2
Subsequent offline launches: no url params passed.
Use 3
Launch via html link (in a CMS): passes a file=<filename> url param which creates a file <argument> for my app to open. Again, I don't want this argument cached, otherwise launching from, say, the desktop shortcut will reopen this file.
Can anyone explain how best to cover these three use cases?
TIA!

Did you solve this cache problem? I have a similar issue where I don't want it to use the arguments over again...

Need help understanding the various speaker set

I must admit to never having used anything but a 2 speaker setup with a sub. I was using an altec set with 4 speakers and a sub, tho i only used it as stereo. This is where i'm confused. What was that...a 5. Thats what i believe it's called. The description doesn't fit because i see there are also 4. sets. So if a 4. means 4 speakers and a sub, what is a 5.....5 speakers and a sub? Thats wouldn't seem balance with an odd number of speakers.
So as you can see i'm totally in the dark about all this and need a explanation as to what the . represents (the sub?) and the difference between 5. and 4..
Another question...i now have the logitech 2. Z-2200's. I'm sorta wishing now that i'd gotten some 5.'s or whatever 4 speakers and a sub is called. last nite i hooked up the old altecs to the rear channel so that i had a full 5. setup, tho of course the very different sounding different speakers on the rear channel probably held back the full potential of the sound. Anyway, i listened to some mucic with this setup and played UT2004 with it. As to the sound for the game, that was nice but nothing to write home about. But the music listening was great. So can anyone suggest a good sounding set of PC speakers to match the logitech's sound quality. I 'm talking about a simple 2 speaker set, no sub, just to hook up to the rear channel. Doesn't have to match the logitech's tonal curve, just it's level of quality, or at least fairly close to it. I'd just use the altecs but they sounded literally /4 as good as the logitechs.

I guess i wasn't clear...i wrote the post at work and was rushed, plus since then i've figured out what the x.x sytem refers to exactly.
I just bought a 2. logitech system and already have a 4. ste of altecs. I love the logitechs and have no intention of getting something else, especially considering i just got em a week ago. but i tried using the altecs with the sub off and only 2 speakers as the rear speakers to simulate a 4. setup. I really like it and therefore decided to get another good set of 2.0 to use as rears only along with the logitechs to have 4. as i now have with the altecs because the altechs sound crappy. So what i really want to know is if anyone makes a good 2.0 set. I since found a few, but the good ones are as much as my logitec 2. system because there are only a very few good 2.0's made. So my only choice i've found so far is an altec set.
The other thing i was wondering is how to get the 4. setup to work correctly because there is no 4. in speaker setup in ctpanel. i saw a thread that showed a download that will allow 4., but i was going to lunch and didn't have time to read it fully. So i'm gonna go check it out right now and see if the download applies to my card.

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

Need some help understanding the way materialized views are applied through

Hi, I need some help understanding the way materialized views are applied through adpatch.
In patch 1, we have a mv with build mode immediate. When applying it PTS hang due to pool performance of mv refresh.
So we provide patch 2, with that mv build mode deferred, hoping it'll go through. But patch 2 hang too on the same mv.
How does this work? Is that because mv already exists in the database with build immediate, patch 2 will force it to refresh first before changing build mode? How to get over this?
Thanks,
Wei

Hi Hussein,
Thank you for the response.
Application release is 11.5.10.
Patch 1 is MSC11510: 8639586 ASCP ENGINE RUP#38 PATCH FOR 11.5.10 BRANCH
Patch 2 is MSC11510: 9001833 APCC MSC_PHUB_CUSTOMERS_MV WORKER IS STUCK ON "DB FILE SEQUENTIAL READ" 12 HOURS
The MV is APPS.MSC_PHUB_CUSTOMERS_MV
This happens at customer environment but not reproducable in our internal environment, as our testing data is much smaller.
Taking closer look in the logs, I saw actually when applying both patch 1 and patch 2, MV doesn't exist in the database. So seems my previous assumption is wrong. Still, strange that patch 2 contains only one file which is the MV.xdf, it took 7 hours and finally got killed.
-- patch 1 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from
dual
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 10:01:46
Manager says to quit.
-- patch 2 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD DEFERRED
USING INDEX
REFRESH COMPLETE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from dual
Start time for statement above is Tue Feb 02 10:05:06 GMT 2010
Exception occured ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
java.sql.SQLException: ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
Exception occured :No more data to read from socket
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 19:51:27
Start time for statement above is Tue Feb 02 12:44:52 GMT 2010
End time for statement above is Tue Feb 02 19:51:29 GMT 2010
Thanks,
Wei

HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>

You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend.

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

It depends on what you mean by "verifying the details". sberman gave you the best place to look to research the technical specifications of the device you are thinking of purchasing. If, however, you're asking how to check if the device is Activation Locked, then you can check the status here: https://www.icloud.com/activationlock/

FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP. CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER IS USEABLE. THANK YOU

HAVE INSTALLED PAGEMAKER, BUT BECAME CONFUSED WHEN "STUFFIT" SEEMED TO BE REQUIRED FOR NEXT STEP. NEED HELP IN FINAL STEPS IN DOWNLOADING PAGEMAKER FOR USE.

>I would like to purchase a new mac with the appropriate operating system that will
run pagemaker 7. If not, I understand that my current mac, Mac OS X, version
10.6.8, processor 2.8 GHz Intel Core i7, Memory 4GB 1067 MHz DDR3 will not support
either Pagemaker 7 or InDesign. My question is what package can I purchase that
will satisfy one or both of these needs? Thank you for any guidance.
R_Kelly created the discussion
"FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP.
CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER
IS USEABLE. THANK YOU"
To view the discussion, visit: https://forums.adobe.com/message/6607524#6607524
>

Need to Understand the Packet Flow

Dear Friend,
I need to understand the packet flow of the below diagram.
I have configured MPLS on R2,R3 and R4. And IBGP is configured on R2 and R4. Now I am able to reach from R1 to R5's Loopback address. I need to understand the packect flow from R1 to R5 like If I ping from R1's Loopback to R5's Loopback address then Source IP is 1.1.1.1 and destination IP is 5.5.5.5. What will be the packet structure at R2, R3,R4...??????????
Please explain in details......Me really confused as R4 has not route about 5.5.5.5 also 1.1.1.1...How it forwards the packets??????

Sanjib
So R2 and R4 are PE devices and R3 is a P device ? And you are not doing MPLS VPNs, just normal MPLS ?
If so R4 must have a route to 5.5.5.5. Did you mean R3 does not have a route ?
With MPLS any P device only knows how to get to other P devices and PE devices. It does not know about any networks outside the MPLS network. The PE devices have routes to any external networks connected to them and know how to get to P and other PE devices.
Note that in terms of PE/P reachability the routing/LDP information has already been exchanged and an MPLS forwarding table built. So for reachability between PE/P routers (ie. not outside the MPLS network) route lookup do not need to be performed, it is simply a matter of removing and adding labels.
So assuming you are not using MPLS VPNs and that MPLS labels have been exchanged between all P and PE routers -
R1 pings 5.5.5.5
1) R1 does a route lookup for 5.5.5.5 and sends it to R2.
2) R2 is a PE device. It does a route lookup for 5.5.5.5 and sees R4 as the next hop (this route has been exchanged via MP-BGP).
3) R2 then need to send the packet to R4. To do this it looks in it's MPLS forwarding table to see how to get to R4. The MPLS forwarding table tells it which label to attach to the packet. It adds this label and sends the packet out of it's interface to R3.
3) R3 is a P device. It does not need to do a route lookup for 5.5.5.5. It simply looks at the incoming MPLS label and consults it's MPLS forwarding table. It will have an entry in it's table saying that an incoming packet with an MPLS label of x should be sent out with an MPLS label of y. It changes the label and sends it out to R4.
4) R4 receives the packet, removes the label, does an IP lookup for 5.5.5.5 and sends it to R5.
Note that actually R3 might not add a label as there is something called Penultimate Hop Popping where if the net hop from the P router is a PE router it sends the packet without a label to save extra processing on the PE router. If you had multiple P routers only the last P router before the PE router would do PHP.
The key thing to understand is that the P devices don't do route lookups when forwarding data. They simply switch labels. Whereas the PE devices do need to do route lookups for destinations outside the MPLS network.
Jon

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

Need help understanding the device association

Similar Messages

Maybe you are looking for