Need help understanding this UEFI/GOP business
Good morning all,
I think what I'm asking is pretty simple, and hopefully someone here can help me.
I just built my new system with a MSI Geforce GTX 780 TI Gaming. I have not yet installed Windows 8.
My question is:
If I want to install Windows 8 in UEFI mode, do I need to update my graphics card BIOS?
OR
Is the UEFI/GOP BIOS only to allow users to make use of the Windows 8 fast boot features?
I'm hoping the answer is "it's only to allow you to make use of the ultra fast Windows 8 boot mode". Otherwise I'm going to be posting a request including my s/n for a bios update before I begin the Windows installation.
Thank you!
Installing in UEFI mode means using Win8 feature otherwise it is still alegacy mode. So yes, GOP is required then.
Similar Messages
-
I need help understanding this flossmanual English, please. . .
In http://en.flossmanuals.net/thunderbird/composing-messages/ , under "Signature Delimiter", the following text appears:
"Signature Delimiter
"When placing a signature in a text based email, a default "-- " (dash, dash, space) is inserted to separate text. To switch it off for all identities of your accounts, you can access your Configuration Console and change mail.identity.default.suppress_signature_separator to "true"."
It then states:
"It's important to note that removing the signature makes it a part of the message you compose. "
What does this mean? Is it referring to removing the signature separator? Or is it a completely new topic -- ie, referring to removing a signature? And if it means removing a signature, how is a removed signature "part of the message"??
The article then states:
"When replying to messages where the signature is placed below your reply, but above the quote, signatures won't be removed if you choose to change identities."
This seems (to me) to suddenly introduce even more new issues.
I deeply appreciate that the flossmanual was the result of dedicated, hard work on the part of intelligent volunteers -- I just sometimes have trouble interpreting the language used. I'm sure it all makes perfectly clear sense to someone who's already part of the flossmanual team, but - alas - I'm not even a coder, let alone developer. . .
Thanks for your help!''maberly [[#answer-689685|said]]''
<blockquote>
Thanks for the very speedy reply, Zenos -- I appreciate it!
</blockquote>
You're welcome.
<blockquote>
The separator was/is used by some software as a way of knowing what isn't ''essential'' to the message, so that it can discard it from subsequent threads -- yes?
</blockquote>
Yes
<blockquote>
By eliminating the separator, my signature is considered to be part of the text of the email - yes? Well, I guess it stands to reason that I would ''want'' my signature to be included in any email in which I'd send it, no?
</blockquote>
That is certainly what most people actually do these days.
<blockquote>
So, the bottom line, for me, would be: If I want to send a signature (mine will be an image only), and don't want to see those "--" separator indicators, I should ask TB to remove the signature delimiter -- yes?
</blockquote>
Yes.
It does seem, to me, polite to have two signatures, at least in business.
One big one giving your contact details to use in a new message, and something more discreet for continuing conversations thereafter. Some short-sighted organizations (including my own employers) come out with a big garish monstrosity that is intended to be used on ''every'' business message. -
I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck. -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.
-
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
Need help with this xml gallery !!!
i have build a gallery but its very simple...... it takes images from xml file.
i have attached all files in zip.
i just want two things if anyone can help.
first when i press next button it goes to next image but with no effect. it just displays next image ... i want to incorporate a sliding effect when the image is changed to another.
and second i want to use autoplay feature.
as soon as swf starts the images came one by one with difference of few seconds.
thx in advance... i really need help in this....!You're welcome.
I don't have an example to offer for the autorun. You should be able to think it thru. One key, as I mentioned is to preload all of the images first, that will allow for smooth playing of the show--no waiting for images to load between changes. You can load them into empty movieclips and hide them (_viisible = false) until they are needed. You could load them when called for, but you would have to put conditions on the displaying of things until the image loads, which will change when they are all loaded, so I recommend just loading them all first.
For the timing you can use setInterval. If something is going to be allowed to interupt the autorun, then you will need to make use of the clearInterval function as well, so that you stop the clock.
Since you will be wanting to know when things are loaded, you will need to use the MovieClipLoader.loadClip method for loading the images instead of using loadMovie. This is because the MovieClipLoader class supports having an event listener. If you look in the help documents in the MovieClipLoader.addListener section, there is an example there that provides a fairly good complete overview of using the code. The only difference is you'd be looking for the onLoadComplete event rather than the onLoadInit event. -
I need help on This SQL problem ASAP :)
Hi All,
I need help on this....
I have a table...
Say table name: one
with these values
premnum status
1234 C
1234 F
1234 P
1234 F
5678 C
5678 F
5678 P
9112 C
9112 F
9112 P
9112 F
3456 C
3456 F
3456 P
7890 C
7890 P
7890 F
Now, I want to output only those premnum with status = 'C' and those premnum with Status 'F' having a count > 1 (with two status = 'F')
So the output would be something like this
premnum status
1234 C
1234 F
1234 F
5678 C
9112 C
9112 F
9112 F
3456 C
7890 C
I really need help on this asap...
I need the SQL statement on this....
Thank you in advance. :)
Edited by: 804697 on Oct 23, 2010 9:45 PMHi,
you can use the following query.
CREATE TABLE PREM_TEST ( premnum NUMBER , STATUS VARCHAR2(1));
INSERT INTO PREM_TEST VALUES(1234 ,'C');
INSERT INTO PREM_TEST VALUES(1234 ,'F');
INSERT INTO PREM_TEST VALUES(1234 ,'P');
INSERT INTO PREM_TEST VALUES(1234 ,'F');
INSERT INTO PREM_TEST VALUES(5678 ,'C');
INSERT INTO PREM_TEST VALUES(5678 ,'F');
INSERT INTO PREM_TEST VALUES(5678 ,'P');
INSERT INTO PREM_TEST VALUES(9112 ,'C');
INSERT INTO PREM_TEST VALUES(9112 ,'F');
INSERT INTO PREM_TEST VALUES(9112 ,'P');
INSERT INTO PREM_TEST VALUES(9112 ,'F');
INSERT INTO PREM_TEST VALUES(3456 ,'C');
INSERT INTO PREM_TEST VALUES(3456 ,'F');
INSERT INTO PREM_TEST VALUES(3456 ,'P');
INSERT INTO PREM_TEST VALUES(7890 ,'C');
INSERT INTO PREM_TEST VALUES(7890 ,'P');
INSERT INTO PREM_TEST VALUES(7890 ,'F');
SELECT PREMNUM , STATUS
FROM PREM_TEST
WHERE STATUS = 'C'
OR (PREMNUM , STATUS ) IN ( SELECT PREMNUM , STATUS
FROM PREM_TEST
WHERE STATUS = 'F'
GROUP BY PREMNUM , STATUS
HAVING COUNT(*) > 1
PREMNUM S
1234 C
1234 F
1234 F
5678 C
9112 C
9112 F
9112 F
3456 C
7890 C
9 rows selected. -
Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks
Just a word of advice. Never ever use the word "urgent" on this forum
-
Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
<mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
<mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
<mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
</mx:AddChild>
<mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:Label x="217" y="346" text="labela za test" id="izbr"/>
</mx:AddChild>
<mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
<mx:SetProperty target="{label1}" name="x" value="845"/>
<mx:SetProperty target="{label1}" name="width" value="169"/>
<mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
</mx:State>
<mx:State name="Projekti"/>
</mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
<mx:XMLList id="MMEmenuModel">
<menuitem label="O nas">
<menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
<menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
<menuitem label="Kontakt" name="podatMME" groupName="one" />
<menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="Galerija">
<menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="projekti">
<menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
<menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
<mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
<mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
<mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
<mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
</mx:Panel>
<mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
<mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
<mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
<mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
<mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
<mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
<mx:Label x="125" y="78" text="Label"/>
<mx:Label x="125" y="103" text="Label"/>
<mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
<mx:Label x="45" y="78" text="Label"/>
<mx:Label x="45" y="103" text="Label"/>
</mx:Panel>
</mx:Panel>
<mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
</mx:states></mx:Application>I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos -
Please I really need help with this video problem.
Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
preloaderBar.visible = true;
preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
preloaderBar.percent.text = Math.ceil(perc*100).toString();
preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
preloaderBar.percent.text = '';
preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
if (filme != "sets.swf")
filme = "sets.swf";
carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
if (filme != "home.swf")
filme = "home.swf";
carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
trace(stat.info.code);
meta.onMetaData = function(meta:Object)
trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
ns.resume();
t.removeEventListener(TimerEvent.TIMER,timeHandler);
t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank youMy first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/ -
I need help setting this up. 2 wireless routers off one internet connection
I have a cable internet connection. I want to connect a netgear wireless router and then plug in a 80ft ethernet cable attached to a Linksys wireless router. Can the Linksys router be used as an access point? Or basically I want to use both wireless routers. I need help putting this together.
Yes you can do that, here are the steps on hot to do it.The router A or your netgear must be configured like router A on the illustration on this link ^_^
Click Here
Many thanks,
Akira893
wE dOnt gEt mAd! wE gEt evEn!
^_^ -
I need help finding this hp hard drive for dv6521eo
I need help finding this hp hard drive and memory for dv6521eo
Hi:
You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
Memory is PC2-6400.
Paul -
I need help w/ This: missing gina dll after installation...
I need help w/ This: missing gina dll after installation of linksys adaptor on Win XP.
Thank youI assume you are facing this error on wireless USB adapter ... WUSB54GC .... uninstall the adapter from all programs >> unplug & replug the adapter >> Install the drivers using found new hardware >>
Once installed use windows wireless configuration to connect to the wireless network .....
See if it works .....
Maybe you are looking for
-
Dear all, Im studying for my FI certification. Can you please help me answering below questions. I will then do the questions myself and compare them with the anwers so that I have an idea if I'm ready for the exam kind regards, CAMILLA 1. A chart of
-
I need help. When I download the ios 3.1 software update to my first generation ipod touch, I click download and i says it will be done in 30 minutes dont disconnect ect... Usually when i download something my ipod flashes download and it shows the t
-
Dear Friends My end users have a requirement as follows In the PO Screen (ME21N, ME22N, ME23N) Item Overview sub Screen, there is a field call "RU" (Requirement Urgency) User want to set it as the second field in this screen is is possible? then how
-
Linking images in HorizontalList
I am trying to create a Horizontal List of images which each link to a different webpage. I have simplified my code below. The Button in the Horizontal List works correctly when moved out of the HorizontalList, so I know the functions work. The icon,
-
Error when I try to turn on genius
I can not get genius to turn on properly in iTunes. When I try to turn it on it collects information, sends it to apple, then the "server times out" when "delivering your genius results" Any ideas to fix this? It is annoying because after the server