Need help urgently with OS X and Windows 7

I need help urgently.
I installed Windows 7 on my macbook pro with OS X Lion. After installing Windows7, I accidently converted the basic volumes to dynamic volumes and now i can't even boot to OS X.
Please help me how to recover my OS X Lion. If I have to delete Windows and bootcamp partitions, it is OK.
I just want to get back my OS X bootable.
Thanks

thihaoo wrote:
Sorry
I can't even see the OS X partition when I hold down the "Option" key.
I could see OS X and Windows partitions if I hold down Option key before changing the partitions to Dynamic partitions from Basic in Windows 7.
Now can't see OS X partiton and only see Winodws partition but when I tried to boot onto Windows7 , I got BSOD and macbook pro restart.
Please help
The usual reason for the OSX partition to be invisible under these circumstances is that it has been trashed by Windows.
Do you have a backup?

Similar Messages

  • NEED HELP w/ P35 Neo Combo and Windows XP Install Stop 0x24 error BSOD

    First a little background, in case it's relevant:
    I was running a 865PE Neo2 with 4 x 1gig Corsair DDR2 6400.  Otherwise, same specs as below. Ran it for 2 years without a hitch, then got a virus that corrupted my profile and had trouble booting, logging on, and persistent virus messages.  Long story short, I fried the BIOS and decided to replace the mobo and upgrade the memory, keeping the rest of the system intact.  I previously had windows installed on both partitions of the HDD but changed the name of the directory for Windows on the C: drive so it would boot from the D: drive.
    I have replaced 865PE with the P35 and changed the boot sequence to boot from CD.  The BIOS loads fine, and I get to the windows setup screen ok.  Whether I opt for Recovery Console, or a new install of Windows, I get a BSOD error message below. 
    STOP: 0x00000024 (0x001902FA, 0xf7906700, 0xf7906400, 0xf7103bef)
    ntfs.sys Address F7103BEF base at F709f00, Datestamp 3d6de5c1
    I tried with both new and old memory (in the right slots) and get the same message.  I booting with no memory because I read in another post that the system should beep to indicate no memory and there was no beep. 
    BIOS recognizes the HDD, CPU and Memory so not sure what the problem is.  Should I try taking the HDD out and reformatting it on another PC? (not easy since I don't have another desktop pc) Please help with some suggestions.  Thank you.
    System Specs
    P35 Neo Combo Mobo
    BIOS ver 1.3
    E6400 Intel Dual Core
    1 x 2 gig Crucial PC3 8500 DDR3 1066 mhz
    nVidia 8800 GTS graphics
    WD 250 gig Sata HD w/ 2 partitions of 125 ea.
    Antec  500W SmartPower PSU
    Installation disk is Windows XP Pro sp1

     STOP: 0x00000024 indicates corrupt NTFS file system on the hard drive
     Reformat would be the best thing to do. Download WD Data Lifeguard for your HDD, make the disk and run it.
     http://support.wdc.com/product/download.asp?level1=6&lang=en
    Quote from: FlyingSteve on 18-August-09, 10:29:00
    I didn't know that the P35 Neo board ran ddr3...
     That's where the 'Combo' part in the name comes into play, 2 DDR2 or 2 DDR3.
    From MSI description of MB:
    Main Memory
    • Supports two unbuffered DIMM of 1.8 Volt DDR2 667/800 SDRAM. (Max: 4GB)
    • Supports two unbuffered DIMM of 1.5 Volt DDR3 800/1066 SDRAM. (Max: 4GB)

  • Need help urgently with conversion of tiff images(.odm) to pdf files...

    Hi Friends!!
    Currently we are working on a project which involves conversion of tiff image files to Pdf files. We are able to convert .tif files to .pdf files.(We are using iText libraries for this..)
    But the only problem we are facing is ---
    We have some .odm files which are multipage tiff files. But we are unable to convert them into .pdf files.
    Note:- Please note .odm is a proprietary extension given by Optix Document Management and Workflow Systems. We figured out that .odm works as a collection of .tif images.
    I searched a lot on the net but couldn't find any help, so, if anyone has any idea of how to go about doing this please let me know...
    Please email any suggestions to [email protected]
    Thanks in advance for your help,
    Rita

    I'm afraid I can't help much with your problem, but I think I can offer some advice on how to get better, faster answers here at this forum:
    First, don't flag your question as urgent, even if it is for you. Claiming urgency is very likely to be counter-productive: most forum regulars will simply ignore such messages as rude and selfish attempts to elicit immediate and special attention.
    Besides, unless the Symbionese Liberation Army is about to chase you over the edge of a cliff, your problem probably isn't as urgent as you think. :o)
    Second, don't ask people to reply by private email. Most Forum regulars believe solving problems should be a public, transparent process during which a first try at an answer can and should be corrected if someone more knowledgeable notices that it is incomplete or incorrect. Also, they get some of their reward for being respondents from being seen to be competent and knowledgeable by their peers (not to mention the possibility of collecting some of those precious Duke Dollars).
    Good luck!

  • I need help badly with my ibook and palm pilot

    Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

    I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
    At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
    I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
    -NA

  • NEEDING HELP URGENT WITH ADOBE GAMECENTER 64 bit ANE

    Please guys, i'm needing ao much help with this ane... I'm using adobe flash CS6 with the last update. My problem is when i try to build ipa with gamecenter 64bit ane and productstore 64 bit ane delivered from adobe. I always get libgamecenter.a and libproductstore.a are required... But insine ane/meta-.../ there is a libxx.a file... I tried to do all and nothing works and i realized that if I create a new file, and try to use this anes i get another error in CS6 telling that temp files are not found as ABC (something like this).
    i'm needing this to much because i'm finishing my game to publish...
    please if you know how to fix it help me.

    Can´t anybody helps me?? I´m needing so much help. Pls what can i do to solve this all?
    Using Air 16.0.0.222 i got this error in Itunes:
    "Dear developer,
    We have discovered one or more issues with your recent delivery for "MaxCliks". To process your delivery, the following issues must be corrected:
    Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code."
    When i try to Simulate my app using Flash Player Simulator (Ctrl + Enter) I get this error - "The content cannot be loaded because there was a problem loading an extension: Error: Duplicate platform iPhone-ARM found for extension com.adobe.ane.gameCenter".
    Using Air 17.0.0.138:
    Using Air 17.0.0.138 creating a new test file using only adobe Gamecenter 64bit shared by Abhinav Dhandh:
    Using Air 16.0.0.222 i can build ipa but can´t submit. Can someone helps me pls i´m needing this too much!!!
    Since now thanks!

  • Need help:Urgent:MS SQL Server and J2EE Server

    Hello,
    i am developing simple bean managed persistence bean. i want to know how could i use microsoft SQL Server as my database with ejb's in J2EE. i don't want to use cloudscape rather i want to connect through jdbc bridge with sql server. can any body help me out ?
    i have developed DSN for my database with the name of DsnProduct and user name for DB is guest and password is guest123.
    so do i have to change configuration is my J2EE server . or put some additional code. so far i have added the following line in my implementation class
    private String dbName= "java:comp/env/jdbc/ProductDB";
    DataSource ds = (DataSource) ic.lookup(dbName);
    con = ds.getConnection("guest","guest123");
    moreover in server configuration i have added driver
    sun.jdbc.odbc.JdbcOdbcDriver
    and also provide the following JNDI Name
    jdbc/ProductDB
    and
    it's url is
    jdbc:odbc:DsnProduct
    i am thankfull for your support.
    [email protected]

    hi llturro,
    Thanks for answering my question. I have tried out what you suggested, but I still can't fix my problem. The following are the messages that display when I try to run my servlet. It seems that the DataSource, Connection and Statement are ok, however when it comes to the ResultSet the error message appear. What's wrong with my ResultSet coding ?
    ResultSet rs = stat.executeQuery("SELECT ISBN FROM BOOKSINFO WHERE ISBN='"+primarykey+"'");
    setEntityContext Method
    Find by primary key
    DataSource OK
    Connection OK
    Primary Key = 013-00-675721-9
    Statement OK
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
    java.rmi.RemoteException: Unknown Exception/Error thrown by EJB method.; nested exception is:
    java.lang.NullPointerException
    java.rmi.RemoteException: Unknown Exception/Error thrown by EJB method.; nested exception is:
    java.lang.NullPointerException
    java.lang.NullPointerException
    <<no stack trace available>>

  • I really need help connect with my ipod and my itune??

    guys when i pluge my ipot to my computer and open itune it appear on the itune with my computer screen "iTune has detected an ipod that appear to be courrupted. you may need to restore this ipod before it can be used with itunes. you may also try disconnecting and reconnecting the ipod.
    i been try those step again again and again still would be same problem. is that mean my ipod is broken? and does the warrarty covered it to fix my ipod for free?

    i can't found any ASC in my area and can i took the
    ipod back to the stroe where i brought it? also that
    i live in californa LA
    If you take the iPod back to where you bought it they will probably send it to a ASC but if you want to do it yourself here are some ASC's in your area
    http://www.apple.com/buy/locator/index.html?q=91803&submit.x=0&submit.y=0
    Q. What if I lost my receipt or proof of purchase?
    A. You should check with your reseller, who may be
    able to provide a duplicate receipt for you. If you
    purchased directly from Apple, go to:
    www.apple.com/support/store for a duplicate receipt.
    is that true?
    I'm not sure about individual store policy but if you bought it from Apple then there will be no error in when it was purchased because you bought it directly from them.
    Power Mac G4 (Digital Audio)   Mac OS X (10.4.7)   1 GB Ram, Firewire/USB PCI card, Extra 2x 60GB HD

  • Need Help: Problem with iTunes 8 and artwork.....

    This is a weird issue. I'm trying to add album artwork for imported albums manually in itunes that it can't find or has incorrect. Every time I try (no matter which method) the artwork either doesn't take, iTunes freezes, or the album in question skips the first track until I delete the entire album and re-import. Any suggestions? I'm running 10.5.6. Any help would greatly appreciated

    Hi,
    Hope I can help. I had a similar problem. I could not update any information about the tracks album etc. I had checked permissions everything... finally I decided to go to ID3Tags and selected none and then the edits took. Strange don't know why, but in my case it has worked a number of times.
    Hans

  • Guys please i need help urgently with face time!!

    Please help me...
    so me and my girlfriend sleep togethernat the phone..  When she is a sleep of course there is no noise but there is alway that " interference" noise..   But  now when i block my phone this noise disappear it seems like it is muted  so i wanna now why does it happen thin and if it is rly muted or nor

    look in the drafts folder?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

    Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

    If you've had it for less than a year, then it's still under warranty.  Take it to an Apple store or an authorized service facility.  See http://support.apple.com/kb/HT1434

  • Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

    Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
    Thank you

    Please refer to Creative Cloud Help | Creative Cloud / Common Questions
    CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
    You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
    Regards
    Rajshree

  • Username and password- Need help urgently!

    Hi
    1) First of all, i have received an email stating that my account under Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
    is being banned as there is multiple obsence post. I need to clarify that i have never used my account to post in BBM forum before. Even if i did, is when i need help urgently for my BBM application. Currently i am holding 4 bbms now. Have never came across this issue. Pls check and advise
    2) I urgently need to setup my email accounts. But this time round, when i logged in, they required for my email id and password. And yes my email id is Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use. all the while for the past 4 years. I am unable to log in. I tried all kinds of password but unable to log into my mobile settings
    Verfiy Blackberry ID
    This application requires u to verify ur blackberry id to continue.
    blackberry ID username:
    Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
    password:
    I went to the forget password option, unfortunately as i have never retrieved my password before, i am unable to remember the security question as i did not use it for the past 4 years.
    Pls advise.
    Urgent and thanks

    Hi,
    I have been trying this technique for the past 4 days. It doesnt work no matter how i change the password at the link that u gave me. Even though it's being reset accordingly, i am still unable to log in the password at my mobile. i am 100% sure that i have entered the correct password at my mobile. ( verify blackberry id) . I want to setup new email accounts under "setup" . Upon me clicking " email accounts", it prompt for the one key password. I have never faced this issue before. I am very very sure that my password is correct. Pls advise as i need to add email accounts. Other programs are working fine without any password required being prompt. ie. blackberry world
    This is very very urgent to be resolved. Pls help.

  • My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

    My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

    Lbo51380 wrote:
    cant find an itunes app for my laptop. is there something i can get that will help with this?
    Go here -> http://www.apple.com/itunes/download/

  • I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible

    Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app

    I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone.  It works well for me for the past couple of years.
    As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
    As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think.

  • Need help urgent,my iphone is stuck at connect to itunes screen.when i restore with itunes it shows error -1. please help me

    need help urgent, my iphone is stuck at connect to itunes screen, when i restore it using itunes, it shows error -1...may someone help me plz....

    See:
    iOS: Unable to Update or Restore
    http://support.apple.com/kb/ht1808

Maybe you are looking for

  • Help me on this report

    Hi Guys, can u please help on this report. The out put which is showing is incorrect for the following report. Just check with the matnr as 100-100 & plant as 1000. The out put is showing wrong. Just check that in se16 for the same matnr & plant the

  • Error while trying to retrieve text ......

    Hello, while connecting to Oracle 8i from my VB program i get the following error. -2147217843[Oracle][ODBC][Ora] Error while trying to retrieve text for error ORA-12154. but i get the connection in debug mode. please give any guidance. I am using Or

  • Video stutters/glitches every few seconds

    I have a video I recorded in iMovie with FireWire and rendered as a mov file. The file plays fine in VLC, but in a premiere elements 12 project, it stutters/skips frames every few seconds. Why can't software just work? What do I change?

  • DNL_CUST_BASIS3 still running

    Hello I started the UOM replication with DNL_CUST_BASIS3 but since 2 hours it still running. I R3AM1 i cant see that block is at 11 but I don't understand it doesn't stop yet.... can you help me please?

  • Create Parameter in Smartforms Interface table tab signed as local type

    Error Message: Form Interface     Only table types may be used as the reference type for a table parameter What I did: I have created a table in <i>tables tab</i> of <b>Form Interface</b> like this: Parameter Name: IT_1 Type Assignemnt: TYPE Associat