Need Help Urgently Zen Micro "Firmware Problem&qu

Hello,
I've had my Zen Micro for a year now and due to a "screw up" when i start my player it displays the error "Firmware Problem" and start up in recovery mode. When I try to reload the firmware the update application on my pc it says "Your player is not connected" now can I fix this so I can start using my wonderful Zen again?
PC Specs If needed: Windows Media Center Service Pack 2

Thanks for the reply, but that firmware download doesn't work for me. As I said in my original post, my player is not recognized as being connected when it is. It is not my computer because Jukebox opens up when it detects the device and it is listed among my removable hardware.
I've downloaded the software, but nothing happens after the "select your language" prompt. It just says "Your player is not connected please connect your player" with a grayed out 'Upgrade' button and a darkened 'Close' button. I've tried unplugging and reconnecting the USB, but it still doesn't recognize that it's there.
Anyone else have an idea?Message Edited by lizzievee on 02-04-2007:29 AM

Similar Messages

I need help , 8GB ZEN has 'Firmware Problem' mess

Hi there I'm from Singapore & I bought a 8GB ZEN from West Mall's Harvey Norman last Oct .
Eariler on , I realised that my ZEN has a 'Firmware Problem' message displayed on the screen . I try as might to reset the player countless times but no matter what , the message still appears & to make things worst I tried to call the customer/techincal support hotlines but they're closed for the day :S
I don't know what happened , it was still working fine this morning when I brought it to Uni . Does anyone know how to solve this problem ?
Thanks
Karen

If you get the firmware error, you can go into the Recovery mode by holding down the Play/Pause button while turning on the unit. Then do a 'Reload Firmware'. This will clear the firmware. Download and run the Firmware update from the Creative website for the Zen. This should reaload the firmware with the latest version.
If that fails, just bring the Zen and the receipt down to the Creative service centre and they will take care of it.

Need help with Zen Micro and Win

Hi,
I bought a Zen Micro 2 days ago and I can't get it to work with my Win XP machine.
I did what was told in the manual: install the software first then plug the player.
When I plug the player in I get the following message:
Found New Hardware:
Zen Micro
According to the manual, it should be detected and the drivers installed automatically.
But it dosen't. Instead I get the Wizard that try to find the drivers and it dosen't find them.
I let the battery get a full charge and I tried again. Same results.
I tried to update the firmware but since the player is not detected that didn't work.
I also tried to get the new MediaSource/Zen driver (ZENM_PCAPP_LB_4_00_8_PDE.exe) but that didn't fix my problem either.
I also tried to install the Creative Zen Micro Driver version .27.02 but it tell me that I can't install it because the user I tried to install it with is not an administrator. But this is not true since there is only one user on this machine and it's the administrator. First software that tell me this.
I'm using XP Home with SP2.
Thanks for the help.

SSR wrote:
The reason it won't install is because the drivers aren't installed.
I've seen a very few others with this strange error about administrati've pri'veleges, so I'm wondering if it's a Windows issue here. You could try downloading the drivers from to see if this is any different.
Try creating another administrator account and see if it will install from that, and try searching back (perhaps someone had found a solution). I think there's also a way of running a program with forced pri'veleges, perhaps Google can turn something up on that.
I remember one user needs to change some rights of the registry in order to install the software. It looks like under some cases, the login account does not have sufficient rights to write registry.

Zen Micro firmware problem

I installed my new firm ware on monday and things were going good until about thursday my zen micro would shut off for no reason in the middle of a song when i turn it back on its turns back off right away so i have to remove the battery to fix it but after an hour of use its turns off again unexpectedly. i hope i dont have get an rma. is it the new firmware? i never had any problems before please help

I have had my zen micro about 3 weeks now or a month im not sure. well i installed firmware on it and i think its the lastest version its 2. and today i was listening 2 it and all of a sudden it stopped so i turned it off then back on and the first thing that pops up is firmware problem. so i go here and do all the ste
ps.
i rebooted. disk clean up. reloade firmware and put it back in. now it is still there. i dont think this is a major problem i just need some help on how to fix it. thanks

Zen Micro "Firmware Problem&qu

Okay guys, I need your help. I have a 4 GBsilver Zen Micro (not photo). This is my second one. The original one had headphone jack issues. So I've had this unit for about 0 months. Now, yesterday I was listening to the Talking Heads when it froze up. I didn't drop it, it just froze. So I took the battery out and put it back in. It said Rebuilding Library. Okay, fine,. this has happened before. But, then the status bar froze up about 3/4 the way to the end. Then about 3 minutes later, the screen says "Firmware Problem." What should I do? Should I reinstall the firmware? Where do i get it from?

Thanks for the reply, but that firmware download doesn't work for me. As I said in my original post, my player is not recognized as being connected when it is. It is not my computer because Jukebox opens up when it detects the device and it is listed among my removable hardware.
I've downloaded the software, but nothing happens after the "select your language" prompt. It just says "Your player is not connected please connect your player" with a grayed out 'Upgrade' button and a darkened 'Close' button. I've tried unplugging and reconnecting the USB, but it still doesn't recognize that it's there.
Anyone else have an idea?Message Edited by lizzievee on 02-04-2007:29 AM

Zen Micro Firmware problems ***FIXED

Like many of you I had the problem of updating my firmware, only to have it fail and then read "Firmware error" when you try to restart the device. The end result is what appears to be a dead Zen Micro and the PC cannot recoginze it. Well with the help of SSR I finally fixed the problem.
** Please note I am using Windows XP Pro with Service Pack 2 installed
"Firmware error"
The way to fix it is simple. Download and reinstall Windows Media Player 0. I already had it installed, but I reinstalled it anyway. Then go into your Device Manager and right click on your !Creative Zen Mirco and update the drivers. The system will now find the new drivers (MTP?MPT?) and you have connectivity with your Zen again.
Now you'll want to rollback the firmware to .0. You can try to do 2.2 but it will fail every time because the device thinks you already have it, and overriding it will result in "firmware update failed".
Once you have .0 installed again, you can then update the firmware to 2.2.
After it is installed, take out the battery and boot into recovery mode. Choose REBOOT as your option and nothing else. This will rebuild the file library and complete your firmware upgrade.
Now you have a Zen Micro 2.2 that your COMPUTER will detect but your software will not. That said, you need to go to the download section and download the following software.
Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource (9.72 MB)
Creative MediaSource Player/Organizer 3.30.2
Creative Zen Micro Media Explorer Web Update
Creative MediaSource Plugin for PlaysForSure devices (version .00.8)
I reccomend installing then each one at a time, then rebooting as the system says and moving on to the next one.
When you are all finished, plug in your Zen Micro and it should be working. Let me know if you have any other questions.
Message Edited by eazysct on 2-3-2005 07:50 AM
Message Edited by eazysct on 2-3-2005 08:27 AM

dennis75 wrote:
Hi,
I also have the problem with the recognition of my zen micro by my PC.
It started when I tried to update to firmware version 2.2.02.
During the update-procedure... it would not go any further, so after half an hour of waiting I clicked on close.
Since then My pc does not recognize my zen!!
When I look at my info in the zen it says it has 2.2.02 installed.
I have tried the following already:
) Install firmware ..0 -> Did not work because it says: please attach zen.
2) ReInstall MediaPlayer 0 -> Did not work... still: "no machine attached".
3) Go to device manager and update driver -> Here it can see the zen and i updated the driver, but still..when I try to update the firmware back to ..0 it says: please attach zen.
PLEASE HELP!!!
Best regards,
Dennis
Just to eliminate one possibility: do you have Windows XP with Service Pack or 2 and Windows Media Player 0 installed on your computer? The reason I ask is that Version 2.x firmware will not work with other versions of Windows or WMP.

Need help with Zen Micro Photo: It stays in recovery m

Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

I need help -- my zen micro doesnt w

first of all, sorry for my bad english..im brazilian, and i got my zen micro 5gb (black) in last week..i really enjoyed it!! so funny, functional, and practice, etc.. whatever, yesterday i was listening and a went in menu to turn on back lights.. and it works.. the lights turned on.. but the player has stopped.. doesnt respond any action..then, i tried so many times displugin the batery.. but when initialize stopped on CREATIVE logo. copyrightt 2004... already tried connecting on pc.. but nothing.. last night.. i wait the battery went down.. but when i put it to recharge.. shows the same problem.. i really dont know what should i do..so.. is this.. if anyone could help me i will be so happy..thanks a lot

Oi!
Tried a disk cleanup? To run a Disk Cleanup you need to access the Rescue Mode on the Zen Micro. To access the Rescue Mode: remove the battery, hold the power switch to the "on" position and KEEP IT HELD TO "ON" while reinserting the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.

Zen Micro Firmware Problem.. HE

hi.
i just baugth recently the Creative Zen Micro 6G, about 2-3 monthes ago.
two weeks ago the battery started making problems it wouldn't relode it self with any posible USB.
after i tried again and again it suddenlly workd, but the device said "Firmware Problam" and it went straigth to "Recovery Mode" which has the next options:
. Clean up
2. Format All
3. Relode Firmware
4. Reboot
i tried them all but nothing is making it relode the firmware even when the device is connected to the comp.
it's like it's destroid and i cand install the drivers.
can someone help?!

To reload the firmware follow the advice here in the Zen FAQ at Nomadness.net.

Zen Micro: firmware problem with 2.00.

Hello,
I just bought the Zen Micro and did an upgrade of its firmware to 2.00.2 before playing around with it.
I then ripped CDs using WinMP 0 and tried to sync the device.
After around 30 songs, the Zen Micro did not accept any more songs.
I also tried the Zen explorer way by copying files directly to the device.
Same problem after about 30 songs, the device stops responding...
Any clue?
Thank you
Nicolas

First easy thing to try is a disk cleanup. To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.
If that doesn't help, and to check if there is an issue between your PC and the player, try and find another PC you can test with. If the other PC works OK this suggests a USB incompatibility, so the quick solution might be to buy a good quality PCI USB card like Adaptec or Belkin. Not a wonderfully elegant solution, but USB cards are generally cheap and it might solve the issue immediately.

Zen Micro - Firmware Problem on start

Hi, I have recently begun getting an error on my Zen Micro about a "Firmware Problem". When I switch on my MP3 Player it goes into the normal startup procedure, Copyright and?Creative logo but than I get an error message saying, "Firmware Problem". When in this error message I am unable to do anything, the computer will not detect it and I cannot get into safe mode or the main menu. Please help!

Go to the website download page and download firmware version .xx.xx. Disconnect the player from the computer and access the player Rescue mode. Select Reload OS option and wait for prompting to connect the player. After that, run the firmware update you have downloaded.
Jason

Creative Zen Micro Firmware problem: "Device not connected, please connect your devi

After an exhausti've search, I've found the fix for losing your firmware and not being able to update it via download from the creative.com. To explain my problem, I had issues with my device connectivity, so I tried to option of reloadinging my firmware via Recovery Mode (option 3, 'Reload Firmware'). After selecting this option, I tried to download and update my firmware via the creative.com website. The module to update my firmware displayed the error message "Device not connected, please connect your device." After about 2 hours of trying various suggested fixes, I found a relati'vely easy fix by running together various suggestions I found for other problems. First rollback your Windows Media Player (WMP) via the instructions found on this page: http://www.auditmypc.com/uninstall-m...layer0beta.asp. Restart your computer after rolling back WMP.
When your compter restarts, insert the "playsforsure" CD labeled "Easy Start CD." Follow the directions for reinstalling WMP. After WMP is reinstalled, restart again. When the computer restarts, return to the CD and follow the directions in the prompt. Reconnect your device when prompted. Once you reconnect your device, it may not function right away. If this is the case, go to the 'Start' button, under 'Control Pannel,' select 'System.' Under 'System' select 'Hardware' and then 'Device Manager.' Find your portable device under 'Uni'versal Serial Bus controllers.' Click on your device and select 'Uninstall' from the small icons at the top of the window. When this is completed, unplug and plug your device back in. After this is done, click on 'Scan for hardware changes,' also a small icon at the top of the window. If your device had the problem mine did, it should now be recognized. Go back to the Creative website and download the latest firmware. The module should now find your player without any problems.
The only thing I can figure is that the "playsforsure Easy Start CD" must have a device driver that solves the problem that you can't find anywhere else. I hope this helps someone out there (tech support was telling me that I was going to have to ship my device back to the company I bought it from to get it exchanged...which would have taken at least a month, I'm sure). Good luck to you all.

For all of you non-technical Micro owners:
I found a fix for this that I hope will help others out.
When I want to Sync tracks to My Zen using Yahoo Jukebox or WMP, I simply reboot my machine with the device PLUGGED IN. After Windows starts up, my applications recognize that the Zen Micro is connected. Good Luck.

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.

Zen Micro "Firmware Problem" - One solution and what to do BEFORE it happ

My Zen Micro 6GB recently croaked with the dreaded "firmware problem" message. After a call to support, I was told to send it in, however I was later able to connect to the unit and download new firmware.
Here's what happened:
In the middle of a playlist, the unit froze, displaying "firmware problem."
- I took the battery out and powered up in recovery mode, then tried both reboot and reforomat. No luck; Still got "firmware problem."
- I downloaded firmware updates, thn connected the unit to my laptop, which does not have MTP media explorer installed. The laptop does have Yahoo Music Engine and Windows Media 0, both of which are used regularly to copy music to device.
- The computer recognized the Zen Micro, but the firmware update did not run, saying it could not connect to the device.
- Retried several times, after reformatting, etc.
Now, here's what seemed to fix it
- Let the battery drain completely while in the unit
- Connected the Zen Micro to a computer with the MTP media explorer already installed. This is a system that is also used to regularly download music to the device.
- Allowed the battery to charge for an hour
- Started MTP media explorer, noticed that device went into "Recovery Mode"
- Ran the firmware upgrade and it installed.
This is conjecture, but it seems that the MTP media explorer must be running to launch the firmware upgrade, but you can't install MTP without a valid device connected. I don't know why this is - maybe some kind of copy protection scheme. I only had it installed on one of my computers because it seemed unnecessary and I hate loading software that I'm not going to actually use.
This is what worked for me. Hope it works for you.
I'm still really disappointed with Creative's warranty terms, lack of phone support past 60 days and failure of tech support to recognize the problem and offer a solution, but my unit is working again and I didn't have to send it back!

By "MTP media explorer", do you mean the MTP/PlaysForSure version of Zen Micro Media Explorer? The earlier versions say "(for MTP devices)"; the latest ones say "(for PlaysForSure devices)". Or do you mean the Microsoft "MTP icon" in My Computer, which should appear on all MTP-capable systems (including your laptop)?
I don't really think it's a DRM or copy protection issue; I think the "firmware problem" is wiping out the hardware code the firmware installer uses to confirm that the device is indeed a Micro instead of, say, an iRi'ver. I suspect ZMME is one of the alternate means it uses to confirm that a Micro is connected. (An issue for further testing is whether ZMME should be launched or just installed.) Firmware fails on all kinds of devices; I suspect this is just a peculiarity of Creative's MTP/Janus firmware installer.
This is likely to be a significant issue for the FAQs and/or Creative knowledge base. With a growing number of MTP/Janus players in the Creative lineup (Sleek, MicroPhoto, and shortly Touch & Xtra), it probably won't be just a Micro issue in the future.
Edit: I just read the other thread, and they seem to solve it by going to a system without Creative software and installing the ..0 firmware. So there seems to be two solutions for now:
If you don't have any Creative software installed, reload firmware and run the ..0 upgrade. (If you need 2.x firmware, then install the Creative jukebox driver and run the 2.20.05 upgrade; you can uninstall the driver afterwards. Sorry, but some of us need 2.x firmware.)</LI>
If you have the 2.x ZMME installed, open it, then reload firmware and run the 2.20.05 upgrade.</LI>
Message Edited by RBBrittain on 0-9-2005 0:06 PM

Zen micro firmware problems, HELLLLP pleeee

i hope someone can help me...
i just got a zen micro for christmas
and it was working great
then today i was listening to a song, and i hit the pause button to hear something my dad was saying, and it didn't pause, i tried again, no luck. so i pulled the battery out and put it back in, and the screen says Firmware Problem and wont respond to anything i do. I tried downloading new firmware, but my computer like doesnt read the connection, when i plug it in nothing happens.
has this happened to anyone else?
can anybody help me?
help is much appriciated
seriously.
thank you!

nevermind i figured it out by myself
i just deleted my old firmware, and downloaded new.
is that correct?
well, it works. so it probably is right.
if not...oh well.
im floppy finished. :smileytongue:

Need Help Urgently Zen Micro "Firmware Problem&qu

Similar Messages

Maybe you are looking for