Need Help - "USB Device Has Malfunction"

http://img408.imageshack.us/img408/4583/untitled2copy3et.gif
The image above shows the error I am getting when I plug in my iPod. It used to work until I updated the software, now, that error message only pops up every now and then.
It is an iPod Mini, Green. We are using Windows XP and this problem is one that I am worried about.
1. How can I fix this problem?
2. How can I avoid it in the future?

first of all
state your computer setup as in mac or pc and what setup as in if you have pc what windows version and what hardware and if mac what osx version and if linux what distribution ..........
think of it like when you go to the doc you don't just state your name and the doc knows everything

Similar Messages

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • "USB Device Not Recognized. One of the USB devices has malfunctioned..."

    I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices has malfunctioned..."
    When disconnect the external drive, he iPod appears in My Computer. However, iTunes is on external drive; therefore music is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device."
    I've changed drive letters on boh iPod and external drive and get the same message. Please help.

    QRe: Zen MX Causes "USB Hardware has Malfunctioned" Msg from Windows XpyUhh, Yes.
    I used to same cable to attach my Motorola Razr and the computer correctly found it and identified it as such.
    I also tried another cable (brand new) same thing.
    I went to recovery mode and did a "CLEAN UP" but no dice.
    I also got my I.S. tech guy to look into it and on the USB page it say "UNKNOWN DEVICE"? when he tried to delete it it did not help, it just reappears as "UDVC"? Also in looking into it it seems to have no drivers.
    He came to this site and tried to do somethinm through here but it did'nt work.
    Now in listening to it last night it began to 'skip' or what I call 'HICCUP" terribly. Where a song starts and stops, during the middle of it. ? It's always done it a little but it has been getting more and more common and now? It's WAY worse about it.
    It has never been dropped, or nishandled in any way. I bought the clear hard case to protect it. And only has about 300 songs on it. Never used for anything else. No vids no pics, nothing.

  • HELP... Ipod not recognized. USB device has "malfunctioned"

    I think I've tried everything posted on every discussion thread. When I plug my ipod into my computer, it detects an unknown device. Then I get an error message that says the USB device connected to the computer has "malfunctioned" and needs to be replaced. The device properties say there is no driver installed (i tried updating drivers with no luck)... I am scheduled to go into the store tomorrow to have someone look at it, but if anyone has any suggestions that would save me the $100 to get it fixed or $250 to buy a new one... That would be great.

    i had this same scenario. my 60 gb ipod photo would not detect in windows xp either via usb. i'm assuming you have a usb connection and this is my solution based on what you have wrote....... what i did... instead of using a regular usb connector i installed a fire wire pci card and everything is working good now. something in windows xp regarding usb is really annoying!!!! try it

  • I bought an iod touch 2g off of my friend and when i plug it in to my compter it says to connect to itunes on the ipod screen and then a pop up on my comp appears saying usb device not rcognized the usb device has malfunctioned on both of my comps it does

    can anyone help the exact message is one of the usb devices attached t this computer has malfunctioned and windows does not recognize it for assistance solving this problem, cick this message please elp i dont want to have been ripped off Dx

    and i went through all the steps but i dont have any disk that step 3 asks for i bought it off of a friend and ive tried it on 2 computers alredy and the same message appears... on my other ipod touch 2g it works fine so i dont think its the usb port any ideas?

  • USB device has malfunctioned

    Ive had my shuffle for about 6 months and all was good with it until I had to reinstall windows. Now when I plug it in I get 'one of the USB devices attached to this computer has malfunctioned and windows does not recognise it'. Its not a problem with my USB ports as other mp3's work fine so does my mouse and printer. Has anyone had this problem and found a solution for it?
    Thanks

    This won't help you any but it is additional info. I encountered the same problem about 3 months ago. In addition, once I hit this problem with the shuffle I found that none of my USB sticks would function on that particular computer either. I even went to the extreme of reinstalling XP but the problem continued. I could not get the PC to wsee the Shuffle and USB sticks until I installed a new USB hub. After that the PC and iTunes would see the shuffle (and USB sticks).
    HOWEVER, iTunes says there is a problem with the shuffle and asks if I want to restore it. When I select the restore option iTunes plays around for a while then tells me there is a problem with the shuffle (error 1418).
    I tried the seperate reset utility. After it chugs around for a while it tells me it had encountered an error that prevents it from formatting the disk.
    One thing to mention at this point is the shuffle plays through the ear buds fine. I am just at a point now where I have to be happy with the music on the shuffle as I can't add or change what is there.
    Best I have from apple is ask for a service agreement.

  • Toshiba PX1267E-1G32 Ext HD Error Message says USB device has malfunctioned

    Hi
    I have Windows XP and have been using my Toshiba External HD for a few years.
    I am a novice.
    Suddenly yesterday the below message appeared and I cannot get any computer to recognise the device.
    "+USB Device Not Recognized+
    +One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. For assisstance in solving this problem click this message+."
    I've tried to reinstall the drivers from the internet & the HDD CD but the same message occurs.
    I've installed it onto another computer and the same error message.
    The device still makes a noise and the blue light is on but no other action.
    Is there anything I can easily do?
    Many thanks in anticipation
    naveedsyed

    > I thought that sort of stuff wasn't meant to happen to external drives....
    Why not? The external HDD is the same like an internal notebook HDD which dies as well
    > Any other suggestions welcome
    I assume this is a 3.5 HDD
    You could remove this HDD from the HDD case and could connect this HDD directly to an desktop PC using an IDE or SATA cable (Im not sure if this is an SATA or IDE HDD).
    If the BIOS would recognize the HDD then you would have good chances to get access to the data stored on this HDD.
    Greets

  • One of the USB devices has malfunctioned and Windows does not recognize it.

    Self Explanatory.
    but ill go into detail.
    my topic is the message i get when i plug my ipod into my computer. It neither charges nor acknowledges the ipod nano there.
    I need some feedback on whether or not to buy a new cable or give up hope on my nano.
    Thanks for your time. (and if you read this and dont post then dont read it. Darnit too late...)
    -kilerboy17

    Check these out:
    iPod in My Computer but not iTunes
    iPod Not in My Computer or iTunes
    Check the Device Manager
    Windows Laptop Doesn't Recognize iPod Over USB
    I hope this helps!

  • USB Device Has Malfunctioned, USB Device Not Recogni

    I see lots of people whos computers do not see the zen micro, but none has said there was an error msg like this. I have a zen micro ..0 win xp sp2 wmp 0 my system was working just fine and the zen still plays the songs i have downloaded on it but now it will not connect, it was not charging either but i finally got it to last night but still no recognition by the pc please help....

    Could this be caused by upgrading to wmp 0 but have the old fimware, and since it will not recognize my zen micro how can i update my firmware?

  • When i connect my ipod nano to my computer it does not light up and i get a message saying the usb devive has malfunctioned

    I need some help here as I believe my ipod nano has crashed or something is terribly wrong. When I plug in the usb to my laptop I get a message saying the usb device has malfunctioned. My ipod does not light up. I have tried powering it on manually and nothing works. Help, this is going to ruin my workouts!!!

    I'm not sure what the glitch was, but after I posted the problem, I called Apple and got a rep to walk me through some troubleshooting tips such as holding down the nano power button while plugging in the usb cable....nothing worked. Eventually, they scheduled a maintenance /replacement service.
    I got the box yesterday and was about to put it in for shipping to Apple, when I decided to try connecting it to my laptop one last time. Viola! it started back up again and is currenting syncing as I type. Guess it was just a bad glitch of some sort. Anyone with a similar issue, perhaps you may want to wait a few days and see if it solves the issue.I hope this helps.

  • USB device has exceeded power limits of its hub AND no sound

    Yesterday no sound, but worse...Trying to connect to computer to charge gives me the message "A USB device has exceeded the power limits of its hub power. Clicking on the balloon states "A USB device has malfunctioned & exceeded the power limits of its hub port. You should disconnect the device." Plugging into the wall charger states "This accessory is not made to work with iPhone...want to change to Airplane mode..." Is my iPhone dead? Ideas please. Thanks

    Hi, Did you every get a reply? I'm having the same issue. The phone was working fine yesterday. Now, the button doesn't work and I can't sync it to restore it because I'm getting the same USB power limit message.

  • HT1766 USB driver has malfunctioned??

    I am trying to back up my Iphone to my laptop and when I plug in the usb it says the USB device has malfunctioned and Windows doesn't recognize it?? How do I fix this??

    That's a windows problem. Try re-installing iTunes.

  • My iphone 4S usb cord isn't being recognized by my Windows 7 PC , I keep getting the device has malfunctioned . Please help me ?

    My usb cord was working perfectly earlier today & now when I plug it up to my computer it tells me "Device has malfunctioned"
    I have tried uninstalling the device & then reconnecting the device .

    Hi BadGyalShani,
    Thanks for visiting Apple Support Communities.
    It sounds like your iPhone may not be recognized correctly by your PC. I recommend starting with the troubleshooting steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    Jeremy

  • HELP - USB device Malfuncti

    I have WinXP Home edition and was using my Zen V Plus for a few months, synching with WMP. Then I reinstalled windows (it is a legal copy) and since then have not been able to do anything more than charge my player when it is connected via USB.
    I get an error message saying the device has malfunctioned. I can uninstall the device, but then I guess Windows installs whatever it wants and I get the same message again.
    I have installed all the Creative software and nothing has changed. I tried to download firmware but the install was cut short, saying the device was not connected.
    Any suggestions?
    thanks!

    I'm just starting with the basics here:
    Have you tried restarting your computer, then connecting your iPod again?
    If that doesn't do anything, have you tried all of the Five R's?
    The Five R's
    If those steps don't help have you tried using a different USB cord for your iPod? (maybe borrow a cord from a friend who has an iPod with a USB cord, if that's possible).
    -Kylene

  • I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

    I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

    The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

Maybe you are looking for

  • How to save the data in a Subvi

    Dear people, I am currently making a program which is calling with a Call by Reference Node. after that, I read out data (in this case an array of clusters) and I am writing new data to the cluster of the subvi. My problem is that the new data isn't

  • Adding a new field to the iView thru OADP

    Hi All, The customer has implemented the ECM for mySAP ERP 2005. I have the following requirement for the current assignment: 1.I need to add a new field to the iView (webbdynpro).How can I do it using the OADP in IMG? Pleae help. thanx, Bhupesh

  • Problem with WRT330N

    Hello, I currently have a WRT330N router, and i have upgraded it to the latest firmware.  Ive had it for 2 days now, but suddenly for some reason i cant access certain webpages.  For example i tried accesing yahoo, and no luck.  However some websites

  • Need to turn on ipad screen with air gesture. possible?

    Hi. I am helping a disabled person to set up his ipad in the following way: make a gesture above the ipad to turn it on so he can read the screen. Is that possible? I assume the ipad would have to be on all the time but the screen needs to auto dim a

  • Calling all Lightroom wizards - aka a converter for all seasons!

    Hi all, I have been using Lightroom since b2 and absolutely love it, but deep down there has always been a little part of me that believes it could do RAW conversions better. THE ISSUE: I know that for some images one converter works better than anot