Need Help: Use Combox Box + List Builder + Column chart!

Hi experts,
I'm a novice in Xcelsius but i met some problems in encountering it, therefore, i would like to seek some assistance from the experts, Thanks!
These are my data for F1 race. And I have 10 years data and below is an example of my data. I would be using 2 years data as an example first.
Year     Country      Driver     Point     Laps     Time/Retired     No.of Driver     Position
2009     Australia     Jenson Button     10     58     1:34:15.784     22     1
2009     Australia     Rubens Barrichello     8     58     +0.8s     23     2
2009     Australia     Jarno Trulli     6     58     +1.6s     9     3
2009     Australia     Timo Glock     5     58     +4.4s     10     4
2009     Australia     Fernando Alonso     4     58     +4.8s     7     5
2009     Malaysia     Jenson Button     5     31     55:30.622     22     1
2009     Malaysia     Nick Heidfeld     4     31     +22.7s     6     2
2009     Malaysia     Timo Glock     3     31     +23.5s     10     3
2009     Malaysia     Jarno Trulli     2.5     31     +46.1s     9     4
2009     Malaysia     Rubens Barrichello     2     31     +47.3s     23     5
2009     China     Sebastian Vettel     10     56     1:57:43.485     15     1
2009     China     Mark Webber     8     56     +10.9s     14     2
2009     China     Jenson Button     6     56     +44.9s     22     3
2009     China     Rubens Barrichello     5     56     +63.7s     23     4
2009     China     Heikki Kovalainen     4     56     +65.1s     2     5
2009     Bahrain      Jenson Button     10     57     1:31:48.182     22     1
2009     Bahrain      Sebastian Vettel     8     57     +7.1s     15     2
2009     Bahrain      Jarno Trulli     6     57     +9.1s     9     3
2009     Bahrain      Lewis Hamilton     5     57     +22.0s     1     4
2009     Bahrain      Rubens Barrichello     4     57     +37.7s     23     5
2009     Spain     Jenson Button     10     66     1:37:19.202     22     1
2009     Spain     Rubens Barrichello     8     66     +13.0s     23     2
2009     Spain     Mark Webber     6     66     +13.9s     14     3
2009     Spain     Sebastian Vettel     5     66     +18.9s     15     4
2009     Spain     Fernando Alonso     4     66     +43.1s     7     5
2009     Monaco     Jenson Button     10     78     1:40:44.282     22     1
2009     Monaco     Rubens Barrichello     8     78     +7.6s     23     2
2009     Monaco     Kimi Raikkonen     6     78     +13.4s     4     3
2009     Monaco     Felipe Massa     5     78     +15.1s     3     4
2009     Monaco     Mark Webber     4     78     +15.7s     14     5
2009     Turkey     Jenson Button     10     58     1:26:24:848     22     1
2009     Turkey     Mark Webber     8     58     +6.7s     14     2
2009     Turkey     Sebastian Vettel     6     58     +7.4s     15     3
2009     Turkey     Jarno Trulli     5     58     +27.8s     9     4
2009     Turkey     Nico Rosberg     4     58     +31.5s     16     5
2010     Bahrain      Fernando Alonso     25     49     1:39:20.396     8     1
2010     Bahrain      Felipe Massa     18     49     +16.0s     7     2
2010     Bahrain      Lewis Hamilton     15     49     +23.1s     2     3
2010     Bahrain      Sebastian Vettel     12     49     +38.7s     5     4
2010     Bahrain      Nico Rosberg     10     49     +40.2s     4     5
2010     Australia     Jenson Button     25     58     1:33:36.531     1     1
2010     Australia     Robert Kubica     18     58     +12.0s     11     2
2010     Australia     Felipe Massa     15     58     +14.4s     7     3
2010     Australia     Fernando Alonso     12     58     +16.3s     8     4
2010     Australia     Nico Rosberg     10     58     +16.6s     4     5
2010     Malaysia     Sebastian Vettel     25     56     1:33:48.412     5     1
2010     Malaysia     Mark Webber     18     56     +4.8s     6     2
2010     Malaysia     Nico Rosberg     15     56     +13.5s     4     3
2010     Malaysia     Robert Kubica     12     56     +18.5s     11     4
2010     Malaysia     Adrian Sutil     10     56     +21.0s     14     5
2010     China     Jenson Button     25     56     1:46:42.163     1     1
2010     China     Lewis Hamilton     18     56     +1.5s     2     2
2010     China     Nico Rosberg     15     56     +9.4s     4     3
2010     China     Fernando Alonso     12     56     +11.8s     8     4
2010     China     Robert Kubica     10     56     +22.2s     11     5
2010     Spain     Mark Webber     25     66     1:35:44.101     6     1
2010     Spain     Fernando Alonso     18     66     +24.0s     8     2
2010     Spain     Sebastian Vettel     15     66     +51.3s     5     3
2010     Spain     Michael Schumacher     12     66     +62.1s     3     4
2010     Spain     Jenson Button     10     66     +63.7s     1     5
2010     Monaco     Mark Webber     25     78     1:50:13.355     6     1
2010     Monaco     Sebastian Vettel     18     78     +0.4s     5     2
2010     Monaco     Robert Kubica     15     78     +1.6s     11     3
2010     Monaco     Felipe Massa     12     78     +2.6s     7     4
2010     Monaco     Lewis Hamilton     10     78     +4.3s     2     5
2010     Turkey     Lewis Hamilton     25     58     1:28:47.620     2     1
2010     Turkey     Jenson Button     18     58     +2.6s     1     2
2010     Turkey     Mark Webber     15     58     +24.2s     6     3
2010     Turkey     Michael Schumacher     12     58     +31.1s     3     4
2010     Turkey     Nico Rosberg     10     58     +32.2s     4     5
2010     Canada     Lewis Hamilton     25     70     1:33:53.456     2     1
2010     Canada     Jenson Button     18     70     +2.2s     1     2
2010     Canada     Fernando Alonso     15     70     +9.2s     8     3
2010     Canada     Sebastian Vettel     12     70     +37.8s     5     4
2010     Canada     Mark Webber     10     70     +39.2s     6     5
2010     Europe     Sebastian Vettel     25     57     1:40:29.571     5     1
2010     Europe     Lewis Hamilton     18     57     +5.0s     2     2
2010     Europe     Jenson Button     15     57     +12.6s     1     3
2010     Europe     Rubens Barrichello     12     57     +25.6s     9     4
2010     Europe     Robert Kubica     10     57     +27.1s     11     5
Basically, my requirement is to have year 2009 and 2011 in my component "Combo Box" and when user choose Year 2010, the source data under the component "List builder" shows the FILTERED countries (since i have duplicated countries here) under year 2010 only.
So user can choose the correct countries and view the details of the countries that he/she choose for year 2010 at the column chart.
Pls feel free to clear your doubts if any.
Your assistance will be appreciated!!
Thanks alot!
Best regards,
htoh

Hi Sanjay,
Appreciate your quick response.
However this is what i've set for my combo box and list builder:
Combo box:
Insertion Type: Filtered rows
Source data: Column A & B (Year,Country)
Destination: Some empty cells
List builder:
Insertion type: Row (I can't find Filtered rows as an option)
Source data: From the empty cells i mentioned above ***
Destination: Another Empty cells.
Is there anything wrong with my settings? Pls help, thanks a lot!
Best regards,
htoh

Similar Messages

  • Need help using drop down list to calculate fields

    I am trying to use a drop down list to control how my field calculate. I have events packages that have multiple tiers. For example, Package One has (2) Tiers. Tier 1 costs $16 & Tier 2 costs $20. So based on the number of guests i want to be able to select the tier and it multiply and give me the total cost for the package. Ex: 2 Guests for Tier 1 = $32. Here is the code i have so far, it is placed under the change handler of the drop down list:
    var costPerGuest = 16;
    var tier = event.newText;
    if (tier == "Tier 1"){
      costPerGuest = 16;}
    else if (tier == "Tier 2"){
      costPerGuest = 20;}
    Total.rawValue = String(Guests.rawValue * costPerGuest)
    //Total.rawValue = DropDownList1.rawValue;
    What happens is when I run this it will not change unless the number of guests will change. So for the example above, if i switch it to Tier 2 after selecting Tier 1, it will not change my Total from $32 to $40.
    Any help would be greatly appreciated.

    Hi,
    I think ,you can use the event of EXIT event of dropdown list.
    var costPerGuest = 0;
    if (this.rawValue == "Tier1")
      costPerGuest = 16;
    else if (this.rawValue == "Tier2")
      costPerGuest = 20;
    else
    total.rawValue = Guests.rawValue * costPerGuest;
    Hope this helps,
    S,Candy.

  • I need helping using iAds in my application.

    I need helping using iAds in my application. I currently am not using any storyboards. I am using Sprite builder for my UI.
    I attatched an image ot show all the different file name I have.
    Everyone is being used & they all work fully.
    The "iAdViewController.h & .m" files are just example codes I looked up and was messing with so that my iAd can work.

    I wouldn't even be able to use the Mathscript node in an executable? 
    What I am trying to do is make a user configurable data stream. 
    They tell me how many bytes are in the stream and what parameters they
    want to be put in to it.  Currently I have to make vi's that are
    called dynamicaly to make the parameters.   Then recompile
    the code and send it to them.  This is somewhat of how the config
    file is set up so I know how to make the data.
    Data_Type  foo
    Bytes 30
    parameter_name        
    function           
       byte#          format
    sync              
    foo_sync            
    29               int
    time                              
    foo_time             
    1,2,3,4       double
    If I can't use MathScript to allow the user to make there own functions
    is there another way that I might be able to do this so I do not have
    to recompile the code atleast?  Were I might just be able to make
    the new function and send that to them.
    Any Idea would be great.

  • Hi! I am newbie to Reports need help with check boxes

    Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

    and one frame is dummy and other frame has big X
    line on it with conditions. Is this a right way to
    create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

  • Re: Beginner needs help using a array of class objects, and quick

    Dear Cynthiaw,
    I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
    I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
    I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
    Is there a way to discard and replace a post (with html source code) in the Sun forum ?
    Thanks for your help.
    Chavada

    chavada wrote:
    Dear Cynthiaw,
    I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
    I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
    [code]
    public class Foo() {
      * This is the bar method
      public void bar() {
        // do stuff
    }[/code]

  • HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

    i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
    <Phone Number Edited by Host>

    You aren't addressing anyone from Apple here.  This is a user forum.
    You might want to call a neaby Apple store to see if they have a free class you could attend.

  • Need help using dbms_scheduler to submit an immediate job on the database

    Hi. I need help using dbms_scheduler to submit an immediate job on the database. Essentially I want to issue a one-time call to an Oracle Stored Procedure - this procedure will then send an email. I've never used dbms_scheduler before, but here's what I have so far.
    So my Program is a stored database procedure named 'TTMS.dropperVacationConflict_Notify', but my problem is that I need to pass 3 parameter values to this job each time I run it. This is what I can't figure out. The procedure expects an 'Id' as number(5), begin_dt as a date, and end_dt as a date.
    How do I pass these values when I run my job? Can anyone help?
    begin
        dbms_scheduler.create_program(program_name=> 'PROG_DROPVACCONFLICTS_NOTIFY',
         program_type=> 'STORED_PROCEDURE',
         program_action=> 'TTMS.dropperVacationConflict_Notify',
         number_of_arguments => 3,
         enabled=>true,
         comments=> 'Procedure to notify PCM of a Dropper Vacation Conflict. Pass in Dropper Id, Begin_dt, and End_dt');
    end;
    begin
        dbms_scheduler.create_schedule
        (schedule_name=> 'INTERVAL_EVERY5_MINUTES',
         start_date=> trunc(sysdate)+18/24,
         repeat_interval => 'freq=MINUTELY;interval=5',
         end_date => null
         comments=> 'Runtime: Every day all 5 minutes, forever'
    end;
    begin
        dbms_scheduler.create_job
        (job_name => 'JOB_DROPVACCONFLICTS_NOTIFY',
         program_name => 'PROG_DROPVACCONFLICTS_NOTIFY',
         schedule_name => 'INTERVAL_EVERY5_MINUTES',
         enabled => true,
         auto_drop => true,
         comments => 'Job to notify PCM of Dropper Vacation Conflicts'
    end;
    /And I use this to execute the job as needed...
    begin
        dbms_scheduler.run_job('JOB_DROPVACCONFLICTS_NOTIFY',true);
    end;
    /

    Duplicate Post
    Need help using dbms_scheduler to submit an immediate job on the database

  • Need help using dropdown list control

    We have created a list of 30 markers & saved this as a
    field cast member, to create a dropdown list.
    We want the user to select from the dropdown list the marker
    they want to navigate to; it seems that this
    should be possible using the dropdown list control, but i am
    having trouble setting/choosing the correct
    parameters for this (the two main options are Contents of
    list & Purpose of List) - can anybody help???

    You need to set the Contents parameter to "Markers in this
    movie" and
    the Purpose parameter to "Execute..."
    This will tell the behavior to treat the contents of the
    field as a list
    of frame markers and then have the playback head jump to the
    markers
    that matches the selected line in the field.
    Rob
    Rob Dillon
    Adobe Community Expert
    http://www.ddg-designs.com
    412-243-9119
    http://www.macromedia.com/software/trial/

  • Need help using WEB module in Lightroom 2 for .mac/mobile me accounts

    Hello,
    I need help in finding the Server path information for Lightroom 2.  I am trying to use the Web module of Lightroom and build a website and instead of going through another hosting service, I want to use my Mobile ME account, can't I do that?
    I have the user name and password obviously but what is the server path, protocol, path?
    Help please!
    Thanks
    Ray

    For those Mac Users using iWeb, MobileMe, and Lightroom 2, here are step-by-step instructions on how to create a web gallery in Lightroom, upload the gallery to MobileMe, and finally, how to link the uploaded files to the wesite you created in iWeb.
    1. In the Lightroom Library module, create a collection of photos you want to display in your web gallery.  For illustration purposes, we will call your collection Sunsets.  Once created, it will be listed under Collections in the left panel of Lightroom.
    2. Switch to the Lightroom Web module and select the Sunsets collection (from the panel on the left of the screen.)
    3. Chose whichever template you like (from the list of Templates in the left panel).
    4. Fine tune the appearance of the gallery using the controls in the right hand panel of Lightroom 2.
    5. When you are satisfied with the gallery’s appearance, use your keyboard to type Command-S.  That will save your template settings (give it a unique name when saving).
    6. Open up Finder on your Mac.  Inside your username folder, create a new folder… I'll call it Web Files.  (You can choose any name you like, and locate the file anywhere on your Mac HD.)  You have just created the folder username/Web Files.
    7. Back in the Lightroom Web module, chose Export, at the bottom of the right panel, and export your gallery to the folder you just made (e.g. export to username/Web Files).  By doing so, you will have created /username/Web Files/Sunsets.
    8. Once again open Finder on your Mac.  Go to /username/Web Files/Sunsets and you will see 3 files in the Sunsets folder: bin, index.html, and resources.
    9. Open a second Finder window and in it, click on your iDisk icon.  You will soon see all of the files on your iDisk.
    10. In iDisk, click on the folder called /Web.  You will now see the /Sites folder inside the /Web folder.  I.e., /Web/Sites.
    11. Drag the Sunsets file from your Mac HD to the /Sites folder on your iDisk.  E.g, drag Sunsets from /username/Web Files/Sunsets on your Mac HD to the /Sites folder in iDisk /Web/Sites.  The Sunsets folder (and the three files it contains) will now upload to your iDisk on MobileMe.
    12. Open iWeb on your Mac. Add a new page to your website.  Call it “Galleries,” or anything you like. (You can also use an existing page if you wish.)
    13.  On that “Galleries” web page (or on an existing web page), create a picture icon, or a word, or a symbol, or anything else that you will activate as a hyperlink to your iDisk web files - specifically, you will link it to the Sunsets folder you just uploaded to iDisk.
    14. Activate the hyperlink in iWeb’s Inspector.  In the URL box, type:
    http://web.me.com/username/Sunsets  (Don’t forget to substitute your name for “username” and the name of your gallery for “Sunsets.”)
    15. Save your website in iWeb, and then publish your site.
    You will NOT see your gallery in iWeb – you will see only the link to the gallery that you uploaded to iDisk..  To view your gallery, either make hyperlinks active, using the Inspector in iWeb and click on he link to the gallery, or visit your website on the internet.  If you want to edit your gallery, you will have to do that in Lightroom… then repeat steps 7 – 11.  You cannot edit your gallery in iWeb, but you can use iWeb to change the appearance of the link to your gallery, or to change it’s location within your website.

  • I need help with drop down lists

    I have a form that does not have lots of space and I want to use drop down lists to fill in specific information that describes site conditions.  The problem I have is that the drop down list is only set up for a single line and that is not enough space for what I want in the drop down list.  In other words, I have items that are several sentences.   I have seen some descriptions of creating a drop down list that then fills in a text box that has multiple lines.  Unfortunately, that is not an ideal solution for me.  I just want the drop down list to select a single phrase.  Here is an example of what I want to be able to select in the drop down.
    The water heater spilled flue gases in excess of 5 minutes under worst case conditions.  The combusiton testing was completed with in 30 days of the invoice submittal. 
    The form does not allow me to create a field that goes all the way across the page so it needs to look something like this:
    The water heater spilled flue gases in excess of 5 minutes
    under worst case conditions.  The combusiton testing was
    completed with in 30 days of the invoice submittal.
    Any help is greatly appriciated.

    Thanks for responding.
    I have three items that are very similar in length and text for each drop down.  There are 9 drop downs right now.  I am using the drop downs to fill in a form that is used by several people and I want to keep things as simple as possible.  Associated with the drop down already is a check box.  When the check box is checked, it fills in a text box with a score (1 point, 5 points, etc).  That score then tallys for a total with all the other scores in another text box.  Using a drop box to fill in a text box is just getting to busy and than I have to distinguish each drop down item so it is clear which text you are selecting.

  • Need help with drop down list in parameters

    Hi All,
    I have the following data set:
    DEPT1     DEPT2     DEPT3 DEPT4
    Commissioner's Office     Finance     Accounting     Accounts Payable
    Commissioner's Office     Finance     Accounting     Fiscal Analysis & Repo
    Commissioner's Office     Finance     Accounting     
    Commissioner's Office     Planning,Asset Mgt     Asset Management     Inventory & Tracking
    Commissioner's Office     Planning,Asset Mgt     Asset Management     Mobility & Congestion
    Commissioner's Office     Planning,Asset Mgt     Asset Management     Roadway Safety
    Commissioner's Office     Planning,Asset Mgt     Asset Management     
    Commissioner's Office     DesignProj Mgt & Tec     Bridge Dsgn Insp Hyd     
    In plus i have four parameters with searchlight options, the problem is when i select "Finance" from DEPT2 and in the next selection level i'm seeing all the departments "Accounting,Asset Management and Bridge Dsgn Insp Hyd" insted of just "Accounting". What i want is if i select a department in DEPT2, in the next drop down list(DEPT3) i want to see only the departement corresponding to the one i selected in dept2. Please need help.
    Thanks

    Hi
    First of all you need to be using Discoverer 10g or 11g Plus not 9.0.4. Assuming you have the right version you need to present the parameters in the correct order. You can change the order on the parameters screen by selecting Tools | Parameters from the toolbar. You then use the Move Up and Move Down buttons to place them in the right order so that DEPT1 is offered first, followed by DEPT2, then DEPT3 and then DEPT4.
    Next, you need to check the radion button on the bottom of the right-hand side that allows linking of parameters then you make DEPT2 dependent upon DEPT1, with DEPT3 dependent upon DEPT2 and so on.
    While this works without hierarchies it works best when you have a hierarchy in place and even better when there is a composite index on the 4 items.
    Best wishes
    Michael

  • Need Help using WRT54GL as Wireless Bridge for Xbox

    Hi.
    I need help configuring my WRT54GL as a wireless bridge for my xbox.
    I have a Billion BiPAC 7404VGO currently in service as my main router/modem. i.e. I have my ADSL connection and PC connected to this. I also connect to this with a laptop.
    I have an original xbox at the other end of the house (cat5 NOT an option).
    Basically I want to connect my xbox to the rest of network. I have a WRT54GL I can use for this. I just dont know how to set it up.
    The WRT54GL has Firmware Version: v4.30.7 (out of the box).
    My Wireless network is using WPA.
    I have a VPN setup through to work via the Billion.
    The idea is to stream media from my PC to the xbox (media centre).
    Any help would be HUGELY appreciated.
    Thanks in advance.
    Katman

    A wireless router is a device which requires its own wired internet connection. A wireless router is not a wireless access point like the Linksys WAPs. A wireless router does not connect wireless to other wireless routers/APs with standard Linksys firmware. With Linksys firmware you need a WAP54G or similar. The WAPs support wireless bridging and repeater mode.
    If you already have a WRT54GL then you have to install a 3rd party firmware which adds wireless bridging capabilities. Read the wikipedia article on "WRT54G" for information about which WRT models support 3rd party firmware and an overview of projects and links.
    Remember, however, that you may brick your router if you install a 3rd party firmware incorrectly and you probably void the warranty if you install 3rd party firmware (it is even possible to find out after you restore the original Linksys firmware if you don't clear the NVRAM before).

  • Need help using TD1Hdl in C++

    So I've generated a .dll to use in VC++.  After almost 3 full days of searching forums and messing with my code I really need to get something done.  The variables I'm trying to use are declared as follows:
    typedef struct {
    long dimSize;
    LStrHandle elt[1];
    } TD1;
    typedef TD1 **TD1Hdl;
     The function I need to call is:
    void __cdecl getFileList(TD1Hdl *SpecResults);
    According to LabVIEW SpecResults is an output variable that I should be able to use.  It is an array of file names retrieved from a database.
    I've gotten my code to compile many different ways but no matter what I do I can't get to dimSize or elt.
    Here's the closest I've gotten:
    int main(int argc, char *argv[])
    TD1 *tdptr = new TD1;//(TD1 *)malloc(sizeof(long) + sizeof(LStrHandle));
    TD1Hdl tdhdl = &tdptr;
    SetupWO();
    getFileList(&tdhdl);
    return 0;
    SetupWO() starts the main vi.  getFileList() is the subvi that i want to get the array from.
    Debugging with watches shows nothing in tdptr->dimSize or tdptr->elt[0].
    Any help you can provide is greatly appreciated.  Thanks in advance.

    Hi Drew!
    First of all thanks for getting back to me.  After almost a full week of debugging this, I think I've finally found a way to access what I need to.  I've separated the code into classes now so it looks a little different but I'll post the important stuff below.
    class wrapper
    public:
    void run();
    private:
    void LStrToCStr(LStrHandle lstr, char *cStrBuff, long buffLen);
    TD1 tdptr;
    TD1Hdl tdhdl;
    void wrapper::run()
    tdhdl = NULL;
    SetupWO();
    getFileList(&tdhdl);
    tdptr.dimSize = (*tdhdl)->dimSize;
    for(int i = 0; i < tdptr.dimSize; i++)
    tdptr.elt[i] = (*tdhdl)->elt[i];
    char atpString[256];
    LStrToCStr(tdptr.elt[i], atpString, 256);
    printf(atpString);
    printf("\n");
    void wrapper::LStrToCStr(LStrHandle lstr, char* cStrBuff, long buffLen)
    int32 len = LHStrLen(lstr);
    if(len >= buffLen)
    len = buffLen - 1;
    memcpy(cStrBuff, LHStrBuf(lstr), len);
    cStrBuff[len] = 0;
    This seems to be working.  I figured it out probably half an hour before I went home on Friday so I haven't had a whole lot of time to mess around with it yet.  The only problem I'm having is that the list I want should have 6 elements in it, but I'm only getting the first 2 when I go through the for loop before it errors.  I'm sure this must be because the array was declared: LStrHandle elt[1];
    I'm thinking I need to use the NumericArrayResize() function?  I haven't looked into it much yet, but I plan on checking it out today.  However in the mean time if you can provide any more advice that would be great!
    Thanks again!

  • Need Help Using JTA / Tyrex

    I am unable to find any sample code for using Tyrex's Transaction Manager and the JTA API. Can anyone help me here? There are a few things I need help with, but if you can help me on any of them that would be huge!
    1. Setting up / Configuring Tyrex
    2. Adding MS SQL as DataSource (and Transaction Domain? It's not clear what that means exactly) (I have the beta JDBC driver from MS)
    3. Writing Code to execute a DB statement inside a transaction
    4. Writing Code to make an object I create participate in a transaction, i.e. you can rollback setting something on my object. e.g. if you an object MyObject had a default "age" of 10 and you called MyObject.setAge( 25 ); and then called trans.rollback(); and then MyObject.getAge() it would return 10.
    I looked on Java.sun.com for some info on using transactions but it appears that they do NOT want to promote Java developers learning the transaction API in that depth. Rather, they'd prefer that you only use the JTA as a client, e.g. through EJB Containers. Does anyone know of some tutorials or something on this stuff any where? I want to write my own transactionable objects/system but there's almost no info anywhere. And Tyrex's website has next to nothing in help too!
    - Robert

    There's been several discussions on the tomcat-user mailing list mentioning Tyrex recently. I have no idea if they're relevant to you, but I remember seeing them go by and wondering what the $#$%)(%^ Tyrex was... <grin>
    You can search the list archives at http://marc.theaimsgroup.com/?l=tomcat-user&r=1&w=2

  • Need help using Apple Remote Desktop for remote family members

    I am new to ARD and need help. I know there are solutions to do what I am trying to do through LogMeIn and Teamviewer - but I have LogMein right now and the free edtition is going away and I think Teamviewer will do the same sooner or later. I have remote desktop but hadnt used it, so I thought it would be a good thing to implement so I wont have to worry about paying fees for services like LogMein or teamviewer down the road.  Long story short I need to be able to remote help friends and family members with their macs and using applications, mostly through screen sharing and control and file sharing. All of the folks id like to help have home ( not business style ) internet service whith DHCP and non-static IP's.  I have set this up for myselft to test it and I can be at work and search my homes IP address and I can see all the macs with ARD on them and it all works perfectly.  I have a mac mini running Lion Server so the ports are forwarded to that server at my home - this is the only think I can think of that is making my home work and my friends not.  But when I try to help my friends and family after I type in their IP and it scans it sees their computer - ( it shows a grayed out icon and their IP ) but nothing else.  I cannot control or screen share. It says it cannot verify.  I helped my friends put the ARD client ( most up to date client ) on their macs as well.  I was hoping that using ARD would mean not haivng to set up my friends and family's routers for port fowarding and all those details.  Is there anything I can do using ARD to be able to type in my friends IP address have it scan and then see all their MACS at their home and pick the one that needs attention/ help, without port forwarding or heavy set up ?  I guess the root question here is how or what is best way to set up ARD to be used to help people remotley when they are all home users as well, no port forwarding, no static-IP, that kinda thing.
    Any help is appreciated - Im trying to use ARD and not a 3rd party app since im afraid even if they are free now they wont stay that way. Please let me know throughts and sugesstions ;p)

    I poked around a bit and the file seems to be:
    /Library/Application Support/Macromedia/mms.cfg
    I'd like to get some confirmation from Adobe that this is the correct file to push, though (it seems like it as it only contains this):
    AutoUpdateDisable=0
    SilentAutoUpdateEnable=1

Maybe you are looking for