Need help using Apple Hi-Fi with iPod Touch.

Are there any instructions for using an iPod Touch (third generation, iOS4) with the Apple Hi-Fi? I know it's supported from the Apple documents and I realize that it will not charge while using it but I just want to know how to make it work a little more consistently.
I had been using my 8GB iPod Mini with my Apple Hi-Fi in the bathroom. Recently I decided to start listening to Pandora and, maybe 4 times out of 10 I can get it to work just fine, but more often than not it will randomly shut down (every minute or so) or start playing through the iPod Touch's internal speaker and I need to keep restarting and/or undocking and re-docking until it's finally stable enough to run for the half hour our so I need. Once it finally works everything works (volume on the Hi-Fi, remote control, etc.). The display won't stay lit without changing settings but that doesn't bother me that much.
As I said, I have found the Apple documentation for the Hi-Fi that says it should work with the Touch (apart from charging) I just need some instructions on the proper way to connect and get it started initially. Any advice from people that have this working or even better any links to manuals or instructions that describe the correct way to do this would be greatly appreciated.

The answer is yes. I am using my iTouch with iPod HiFi

Similar Messages

  • Help on syncing multiple calendars with iPod Touch 4g 64g

    In our university, we use iCal with Blackboard. Also, our main *email* is Entourage - pretty sure it's the most recent version for Mac. 
    How can we sync the Entourage calendar with iCal, and be sure that they are all merged and 2-way functional for the iPod touch and laptops (I know for multiple computers we'll have to set up home sharing - for now let's just focus on the calendar syncing). 
    I have instructions for syncing Entourage with iPod Touch, and it's been recommended to use Google to sync with iCal (thanks llllass) but we don't want to use Google or MobileMe to get to iCal.  iCal is already built into the iPod Touch, as I'm sure you know.
    Any advice on how to make this super simple?
    Thanks in advance.
    Message was edited by: rguillory

    My first suggestion is to try Stanza, as it is a much more configurable ebook reader.  You can use the
    Calibre (ebook management/conversion utility) to transfer ebooks from your computer to your iPod Touch.
    <http://www.macupdate.com/app/mac/30657/calibre>
    Looking at iBooks on my iPod Touch, my font selection and font size are only present when I have an ebook open.  If I tap the center of a page, the top edge of the screen has
    Library | Table of Contents | Brightness | aA (font size, and font selection) | Search | Bookmark
    Where the aA icon brings up a control that has a small a and a large A.  If I tap on the large A, each tap increases the font size until it gets REALLY BIG.  Tapping on teh small a reduces the font size for each tap.
    Landscape lock.  OK for the iPod Touch as a whole, you put the iPod Touch in the orientation you desire, then you quick double-tap on the home button.  This will bring up a list of your running apps.  Now slide the list to the right, and you will see music controls as well as on the far left a screen lock button.  Tap the screen lock button to lock your iPod Touch in its current orientation.  Unlock it later when you want your iPod Touch to be able to rotae again.
    NOTE:  Stanza as an ebook reader, it has its own configuration control that locks Stanza into a specific orientation, independent of the iPod Touch orientation or the iPod Touch orientation lock.  Another reason I like Stanza.
    Wallpaper.  I think you can only change it to something else.  Settings -> Wallpaper, then tap on the screen you want to change.  Now select a different Wallpaper from either the Wallpaper selections, or anything in your Camera Roll, or your Photo Library.
    Message was edited by: BobHarris

  • I am having ipod classic will apple replace it with ipod touch

    apple is replacing my ipod classic 80gb with new ipod classic 80gb due to some technical faults but i want ipod touch.
    so,will they replace it with ipod touch at extra cost??

    avinash cool wrote:
    apple is replacing my ipod classic 80gb with new ipod classic 80gb due to some technical faults but i want ipod touch.
    so,will they replace it with ipod touch at extra cost??
    Of course not.

  • Need help using Apple Remote Desktop for remote family members

    I am new to ARD and need help. I know there are solutions to do what I am trying to do through LogMeIn and Teamviewer - but I have LogMein right now and the free edtition is going away and I think Teamviewer will do the same sooner or later. I have remote desktop but hadnt used it, so I thought it would be a good thing to implement so I wont have to worry about paying fees for services like LogMein or teamviewer down the road.  Long story short I need to be able to remote help friends and family members with their macs and using applications, mostly through screen sharing and control and file sharing. All of the folks id like to help have home ( not business style ) internet service whith DHCP and non-static IP's.  I have set this up for myselft to test it and I can be at work and search my homes IP address and I can see all the macs with ARD on them and it all works perfectly.  I have a mac mini running Lion Server so the ports are forwarded to that server at my home - this is the only think I can think of that is making my home work and my friends not.  But when I try to help my friends and family after I type in their IP and it scans it sees their computer - ( it shows a grayed out icon and their IP ) but nothing else.  I cannot control or screen share. It says it cannot verify.  I helped my friends put the ARD client ( most up to date client ) on their macs as well.  I was hoping that using ARD would mean not haivng to set up my friends and family's routers for port fowarding and all those details.  Is there anything I can do using ARD to be able to type in my friends IP address have it scan and then see all their MACS at their home and pick the one that needs attention/ help, without port forwarding or heavy set up ?  I guess the root question here is how or what is best way to set up ARD to be used to help people remotley when they are all home users as well, no port forwarding, no static-IP, that kinda thing.
    Any help is appreciated - Im trying to use ARD and not a 3rd party app since im afraid even if they are free now they wont stay that way. Please let me know throughts and sugesstions ;p)

    I poked around a bit and the file seems to be:
    /Library/Application Support/Macromedia/mms.cfg
    I'd like to get some confirmation from Adobe that this is the correct file to push, though (it seems like it as it only contains this):
    AutoUpdateDisable=0
    SilentAutoUpdateEnable=1

  • Need help using the "skatter" function with brushes.

    I'm using Photoshop 7 right now. I want to use the scatter function with one of the standard brushes to make a star trail, but the problem is that the stars are too thick, there's too many of them. How do I tell it to draw less instances of the brush when I'm in scatter mode? So that it's only dropping 5 at a time or so?

    I have a control bar for "Master Diameter" but I can't find anything that says "spacing."

  • Need to switch Apple ID on new ipod touch

    My daughter got an ipod touch for XMas.  Since we were away from our cpu at the time she used a friends Apple ID to setup.  Now that we are home and have our own apple ID, we are trying to figure out how to remove the current ID from the ipod and login with our new one.  Any help would be much appreciated!

    You will also have to go to Settings>iCloud and sing out and sign in
    Settings>FaceTime and sing out and sign in. Al You can Be Reached at and delete the old Apple ID email address and add the new one.
    Similar for Setting>Messages
    You may also have to go to Settings>Mail and if it includes an email account with there other persons ID email address.
    Best would be to go to Settings>General>Reset>Erase all content and settings and start over again.

  • HT1349 I Need help!! I lost my Ipod touch at school and can not find it anywhere

    So, I keep my iPod touch in my back right pocket. It normally falls out when I sit down in a seat, but I get it back. But his time, I didn't! I kept retracing my steps for more then an hour but couldn't find it anywhere. I checked the school's office, I asked if anybody found an iPod, I tried texting it..but it's no where to be found.
    I don't have any way to get the serial number, so contacting the police won't help..I have a passcode lock on my iPod, but people can jailbreak into it! IS there no hope of finding my iPod ever again?

    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Is the apple watch compatible with iPod touch

    I Know the apple watch is compatible with iPhone but what about iPod touch? Would it work with Bluetooth?

    I do know that it will work with the iPhone 5 and later, and I doubt that Apple wouldn't make the Apple Watch compatible with the iPod Touch. The fact that the Apple Watch will be able to make calls concerns me. You can not make calls on the iPod Touch with any built-in app, so that might make the iPod Touch excluded from being compatible with the Apple Watch. I am almost one hundred percent sure that IF the Apple Watch is compatible with the iPod Touch it will only be compatible with the 5th generation.

  • Need help i have a 1th gen iPod touch

    I have a 1th gen iPod touch that i have wiped for selling but now the PC can not find the iPod  and the apple logo has not lead under it) i have tried reboots and all sorts of stuff can any one help me pls

    Try here:
    iOS: Device not recognized in iTunes for Windows
    Also try placing the iPod in Recovery mode after being connected to a charging source for at least an hour
    This also may help:
    iOS: Not responding or does not turn on

  • Need help quick.on My 4 gen iPod touch I'm trying to updat my apps and there was a lot that needed an update. After trying to update them the apps have been stuck on the waiting thing for a while. I've restarted it nothing has changed. What do I do!!!

    WHat do I do when I try to update my apps on my 4 gen iPod touch and the apps have been stuck on the waiting thing. I've restarted it and tried to delete them and see if I could redownload them but nothing I'd like to know how to fix the problem soon Cus can't stand going through a day without instagram kik and pandora so please help. If anyone can tell me how to delete them so I can download them again that would be great. Please hurry!!

    Fix iOS Apps Stuck on “Waiting…” During Download & Install
    Fix iPhone Apps Stuck "Waiting" During Installation

  • Need  help using color checker passport with photoshop CS6

    Hello all,
    I'm having an issue using the Color Checker Passport with Photoshop CS6.  Here's my configuration:
    Mac Mini using OS 10.8, but very recently updated to 10.9 (Mavericks).  My problem is the same on either OS version.
    Photoshop CS6 ver 13.0.6 64 bit extended
    Adobe Camera Raw 8.4
    X-Rite Color Checker Passport ver 1.0.2
    Canon 70D shooting RAW in sRGB color space
    NEC Multi-Sync LCD monitor calibrated with Spyder 3 Pro ver 4.0.5
    Now here's the issue.  I go through the recommended workflow and generate a profile with no problem.  Then in Camera Raw (after restarting all applications) I apply the profile to a photograph and instead of getting a nice color-corrected image my image has a greenish-yellow tint to it.  It's very noticeable and I haven't been able to figure out what I'm doing wrong, if anything.  I re-calibrated the monitor, re-did the workflow with other pictures, but still get the same result.
    I greatly appreciate any help or ideas on how to remedy this.  I've sent an inquiry to X-Rite via their Support Web Page, but haven't heard back from them yet.
    Thanks,
    Kevin H.

    Hello all,
    I'm having an issue using the Color Checker Passport with Photoshop CS6.  Here's my configuration:
    Mac Mini using OS 10.8, but very recently updated to 10.9 (Mavericks).  My problem is the same on either OS version.
    Photoshop CS6 ver 13.0.6 64 bit extended
    Adobe Camera Raw 8.4
    X-Rite Color Checker Passport ver 1.0.2
    Canon 70D shooting RAW in sRGB color space
    NEC Multi-Sync LCD monitor calibrated with Spyder 3 Pro ver 4.0.5
    Now here's the issue.  I go through the recommended workflow and generate a profile with no problem.  Then in Camera Raw (after restarting all applications) I apply the profile to a photograph and instead of getting a nice color-corrected image my image has a greenish-yellow tint to it.  It's very noticeable and I haven't been able to figure out what I'm doing wrong, if anything.  I re-calibrated the monitor, re-did the workflow with other pictures, but still get the same result.
    I greatly appreciate any help or ideas on how to remedy this.  I've sent an inquiry to X-Rite via their Support Web Page, but haven't heard back from them yet.
    Thanks,
    Kevin H.

  • Need help using adobe digital reader with screen reader software

    I am helping my father, who is blind, and uses Window-eyes screen Reader software, which reads his computer screen to him in an audio voice. We just bought an ebook, downloaded adobe digital reader, but his window-eyes software will not read the book to him when we have it displayed on his computer screen. Is there a solution to this?
    Thanks

    Thanks for the response. So, I see that my answer does not lie with Adobe--I will pursue the solution elsewhere, if anyone here has some further advice as to what the solution is, please let me know.
    Thanks again.

  • Need help using NI-488.2 with C++

    First some background. I have an existing Windows application (written in MS Visual C++ 6.0) that essentially acts like a printer/plotter. There is a worker thread that receives data asynchronously from a serial port and writes the data to a file for later processing.
    Now some of my customers want me to add a GPIB interface in addition to the serial interface. I have downloaded every document, application note, etc., from NI's site that I could find but I'm not finding enough information to help me figure out how to add the interface.
    This is what I want to do (in a nutshell):
    1) Application has to run on Win95/98/NT/2K/XP. This shouldn't be any problem but I thought I'd mention it.
    2) Application has to run whether the
    NI-488.2 device driver is loaded or not. For this reason I'll use what NI calls "direct entry" to access the GPIB-32.DLL (i.e. use LoadLibrary(), GetProcAddress(), etc.).
    3) Receive GPIB data asynchronously from an NI GPIB interface board (e.g. PCI-GPIB) using a worker thread (same as I do for serial data).
    The requirement as I see it is very simple - receive data asynchronously. But for the life of me I don't see any functions in the NI-488.2 API that I can use for event notification in a worker thread. It also seems like there isn't much in the way of sample code that I could find. The sample code I did find involved sending a command to a GPIB device and then reading the data back from the device.
    I'm just in the research stage so I haven't installed the NI-488.2 driver or a GPIB card. No point spending money unless I can see a reasonable chance of success.
    Does anybody know of some sample code, guidelines, etc., that may help me figure out how to use the NI-488.2 d
    river to receive asynchronous data using a worker thread?
    Thanks,
    Mike

    If file NIDevice.chm is intended for viewing by all customers, could you please move it to:
    ftp://ftp.ni.com/outgoing/NIDevice.chm
    A notice on machine ftp.ni.com says that as of January 23, 2004, it longer allows downloads from the incoming directory.
    Domain name ftp.natinst.com doesn't seem to be accessible at all, though ftp.ni.com was accessible with the above notice.
    By the way, some time ago I looked at the marketing pages for NIDevice and saw two different versions with wildly different prices (I think one cost about 20 times what the other cost). Can you say what the differences are?
    Also a comment for the original poster: As a non-controller, I used ibnotify() to get a callback when the LACS bit turned on, i.e. w
    hen the controller told me to listen. On speculation that the controller would really follow up that command by sending me data, my callback routine did an ibrda() and ibwait() with timeout.

  • I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    Here is how to do it yourself.
    http://www.youtube.com/watch?v=2h53otOBTsI
    Here is how to send it to apple.
    http://www.apple.com/support/ipod/service/battery/
    Hope this helps!

  • HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

    i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
    <Phone Number Edited by Host>

    You aren't addressing anyone from Apple here.  This is a user forum.
    You might want to call a neaby Apple store to see if they have a free class you could attend.

Maybe you are looking for