Need help using dbms_scheduler to submit an immediate job on the database

Hi. I need help using dbms_scheduler to submit an immediate job on the database. Essentially I want to issue a one-time call to an Oracle Stored Procedure - this procedure will then send an email. I've never used dbms_scheduler before, but here's what I have so far.
So my Program is a stored database procedure named 'TTMS.dropperVacationConflict_Notify', but my problem is that I need to pass 3 parameter values to this job each time I run it. This is what I can't figure out. The procedure expects an 'Id' as number(5), begin_dt as a date, and end_dt as a date.
How do I pass these values when I run my job? Can anyone help?
begin
    dbms_scheduler.create_program(program_name=> 'PROG_DROPVACCONFLICTS_NOTIFY',
     program_type=> 'STORED_PROCEDURE',
     program_action=> 'TTMS.dropperVacationConflict_Notify',
     number_of_arguments => 3,
     enabled=>true,
     comments=> 'Procedure to notify PCM of a Dropper Vacation Conflict. Pass in Dropper Id, Begin_dt, and End_dt');
end;
begin
    dbms_scheduler.create_schedule
    (schedule_name=> 'INTERVAL_EVERY5_MINUTES',
     start_date=> trunc(sysdate)+18/24,
     repeat_interval => 'freq=MINUTELY;interval=5',
     end_date => null
     comments=> 'Runtime: Every day all 5 minutes, forever'
end;
begin
    dbms_scheduler.create_job
    (job_name => 'JOB_DROPVACCONFLICTS_NOTIFY',
     program_name => 'PROG_DROPVACCONFLICTS_NOTIFY',
     schedule_name => 'INTERVAL_EVERY5_MINUTES',
     enabled => true,
     auto_drop => true,
     comments => 'Job to notify PCM of Dropper Vacation Conflicts'
end;
/And I use this to execute the job as needed...
begin
    dbms_scheduler.run_job('JOB_DROPVACCONFLICTS_NOTIFY',true);
end;
/

Duplicate Post
Need help using dbms_scheduler to submit an immediate job on the database

Similar Messages

  • I need helping using iAds in my application.

    I need helping using iAds in my application. I currently am not using any storyboards. I am using Sprite builder for my UI.
    I attatched an image ot show all the different file name I have.
    Everyone is being used & they all work fully.
    The "iAdViewController.h & .m" files are just example codes I looked up and was messing with so that my iAd can work.

    I wouldn't even be able to use the Mathscript node in an executable? 
    What I am trying to do is make a user configurable data stream. 
    They tell me how many bytes are in the stream and what parameters they
    want to be put in to it.  Currently I have to make vi's that are
    called dynamicaly to make the parameters.   Then recompile
    the code and send it to them.  This is somewhat of how the config
    file is set up so I know how to make the data.
    Data_Type  foo
    Bytes 30
    parameter_name        
    function           
       byte#          format
    sync              
    foo_sync            
    29               int
    time                              
    foo_time             
    1,2,3,4       double
    If I can't use MathScript to allow the user to make there own functions
    is there another way that I might be able to do this so I do not have
    to recompile the code atleast?  Were I might just be able to make
    the new function and send that to them.
    Any Idea would be great.

  • Re: Beginner needs help using a array of class objects, and quick

    Dear Cynthiaw,
    I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
    I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
    I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
    Is there a way to discard and replace a post (with html source code) in the Sun forum ?
    Thanks for your help.
    Chavada

    chavada wrote:
    Dear Cynthiaw,
    I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
    I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
    [code]
    public class Foo() {
      * This is the bar method
      public void bar() {
        // do stuff
    }[/code]

  • HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

    i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
    <Phone Number Edited by Host>

    You aren't addressing anyone from Apple here.  This is a user forum.
    You might want to call a neaby Apple store to see if they have a free class you could attend.

  • I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

    I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

    You mean an image such as a scanned document?
    If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
    You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

  • Need help in multisim 11? I want to get the transient response of RL circuit....

    Need help in multisim 11?
    I want to get the transient response of RL circuit....i can get the increasing exponential graph in multisim 7 during simulation.....but i am getting a decreasing exponential curve(i.e,decay response) in multisim 11 when i do the same procedure as i did in multisim 7.....how can i get the initial or growth transient response for RL circuit in multisim 11 so that i can get increasing exponential curve....which satisfies time constant = L/R

    Hello,
    The process is the same for any circuit (in this case it is an RC circuit which you sent me). You can find the response on the voltage (which I think it's what you're looking for) at any point of the circuit, as well as any parameter really (R,V,I,L..etc).
    Please refer to the image attached (an analysis on the voltage at an inductor and the wires connected to it).
    The way to set it up (once you're in the transient analysis set up) is, select the Output tab, under Variables in circuit, you can select which parameters to take. V(1) and V(2) refer to the voltage in the circuit at Net 1/2 (or wire 1/2).
    This differs from the voltage change within the capacitor/inductor/resistor. If you would like to see the voltage change of an inductor/capacitor/resistor/etc, you can select under the More options box, the button Add device/model parameter, which will take you to a window to select the device type, its name (in the circuit) and the parameter which you wish to analyse. Once you click on Simulate, you can select Cursor >> Show Cursors, to view information for y and x axis (like rise time, decay time, voltage difference...etc)
    Hope this helps,
    Miguel V
    National Instruments
    Attachments:
    untitled.jpg ‏178 KB

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

  • I can't download the app '12 days of christmas'. The app details say that you don't need to use a device and that you can "download the gifts from your computer". How do I do this?

    I don't have the latest ipod touch and therefore can't download the app '12 days of christmas'. The app details say that you don't need to use a device and that you can "download the gifts from your computer". How do I do this, as I know its not possible to diretly use an app on a computer?
    Thanks
    Chris

    Go to the Purchases Tab in the App Store and Accept the apps.
    Then you'll be able to update them.
    Regards
    TD

  • I'm from israel and i need to use my iphone Warranty Where should I send the device?

    hi,
    i'm from israel and i need to use my iphone Warranty Where should I send the device to fix some problem?

    Depends on where the device was purchased.
    If it was purchased in Israel, take it to an authorized service center in Israel.
    If it was purchased elsewhere, you'll need to take it back to the country it was purchased in for support.

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

  • I need help..after I've updated my iMac to the efi 1.3.. After rebooting it won't start at all.. Instead it's giving this beeping sounds..repeatedly..

    I need help..after I've updated my iMac to the efi 1.3.. After rebooting it won't start at all.. Instead it's giving this beeping sounds..repeatedly..

    http://support.apple.com/kb/HT2341

  • I need help to activate my iphone 5s. am stuck on the activation page. can someone help with with the icloud activation bypass? how do i even go about it?

    i need help to activate my iphone 5s. am stuck on the activation page. can someone help with with the icloud activation bypass? how do i even go about it?

    You must put in the required information. If you do not have it, you must get it from the original owner of the phone. If you have forgotten your iCloud password, you can reset it at:
    https://iforgot.apple.com/password/verify/appleid
    There is no such thing as an activation "bypass". Activation Lock is a security feature. It wouldn't be that secure is you could bypass it, wouldn't it?

  • Need help using Apple Remote Desktop for remote family members

    I am new to ARD and need help. I know there are solutions to do what I am trying to do through LogMeIn and Teamviewer - but I have LogMein right now and the free edtition is going away and I think Teamviewer will do the same sooner or later. I have remote desktop but hadnt used it, so I thought it would be a good thing to implement so I wont have to worry about paying fees for services like LogMein or teamviewer down the road.  Long story short I need to be able to remote help friends and family members with their macs and using applications, mostly through screen sharing and control and file sharing. All of the folks id like to help have home ( not business style ) internet service whith DHCP and non-static IP's.  I have set this up for myselft to test it and I can be at work and search my homes IP address and I can see all the macs with ARD on them and it all works perfectly.  I have a mac mini running Lion Server so the ports are forwarded to that server at my home - this is the only think I can think of that is making my home work and my friends not.  But when I try to help my friends and family after I type in their IP and it scans it sees their computer - ( it shows a grayed out icon and their IP ) but nothing else.  I cannot control or screen share. It says it cannot verify.  I helped my friends put the ARD client ( most up to date client ) on their macs as well.  I was hoping that using ARD would mean not haivng to set up my friends and family's routers for port fowarding and all those details.  Is there anything I can do using ARD to be able to type in my friends IP address have it scan and then see all their MACS at their home and pick the one that needs attention/ help, without port forwarding or heavy set up ?  I guess the root question here is how or what is best way to set up ARD to be used to help people remotley when they are all home users as well, no port forwarding, no static-IP, that kinda thing.
    Any help is appreciated - Im trying to use ARD and not a 3rd party app since im afraid even if they are free now they wont stay that way. Please let me know throughts and sugesstions ;p)

    I poked around a bit and the file seems to be:
    /Library/Application Support/Macromedia/mms.cfg
    I'd like to get some confirmation from Adobe that this is the correct file to push, though (it seems like it as it only contains this):
    AutoUpdateDisable=0
    SilentAutoUpdateEnable=1

  • Need help using 1440x1080 footage in a SD 4:3 timeline

    Hi Folks,
    I need to use some AVCHD footage in a normal SD 4:3 timeline destined for a dvd. I'm trying to figure out the best workflow. The client provided a usb hard drive with some files extracted from a Sony hdr-sr5. I know the first problem is ingesting these files. I'm on a PPC G5 so I know using the L&T window isn't an option. I have experimented with using Toast to convert the files to ProRes 422 and that seems to work to some degree. I'm probably not doing it correctly because the footage shows up in FCP looking somewhat squished down and with letterbox bars above and below. In Toast the files indicate that they are h.264 1440x1080. When viewing in the Toast Video Player they get 'expanded' to 1920x1080. So I'm not sure why the footage gets letterboxed when converted to ProRes. So I guess that's the first part of the problem.
    The second issue is that I just need to use the center crop of the image in a SD timeline. It's just talking head stuff so there's no problem cropping down. But I'm just not sure I understand the correct procedure for doing that once I have the footage ingested in the proper format.
    I could definitely use some guidance here as the whole AVCHD thing is new to me.
    Thanks,
    Chris

    Can't help with your first question, but create an sd 4:3 timeline. Drop your hd footage into it. It will come in letterboxed. In the motion tab, remove any distortion, scale and position to your liking

  • Need Help using WRT54GL as Wireless Bridge for Xbox

    Hi.
    I need help configuring my WRT54GL as a wireless bridge for my xbox.
    I have a Billion BiPAC 7404VGO currently in service as my main router/modem. i.e. I have my ADSL connection and PC connected to this. I also connect to this with a laptop.
    I have an original xbox at the other end of the house (cat5 NOT an option).
    Basically I want to connect my xbox to the rest of network. I have a WRT54GL I can use for this. I just dont know how to set it up.
    The WRT54GL has Firmware Version: v4.30.7 (out of the box).
    My Wireless network is using WPA.
    I have a VPN setup through to work via the Billion.
    The idea is to stream media from my PC to the xbox (media centre).
    Any help would be HUGELY appreciated.
    Thanks in advance.
    Katman

    A wireless router is a device which requires its own wired internet connection. A wireless router is not a wireless access point like the Linksys WAPs. A wireless router does not connect wireless to other wireless routers/APs with standard Linksys firmware. With Linksys firmware you need a WAP54G or similar. The WAPs support wireless bridging and repeater mode.
    If you already have a WRT54GL then you have to install a 3rd party firmware which adds wireless bridging capabilities. Read the wikipedia article on "WRT54G" for information about which WRT models support 3rd party firmware and an overview of projects and links.
    Remember, however, that you may brick your router if you install a 3rd party firmware incorrectly and you probably void the warranty if you install 3rd party firmware (it is even possible to find out after you restore the original Linksys firmware if you don't clear the NVRAM before).

Maybe you are looking for

  • Dunning Report - Regards

    Dear all In our system, we maintain the dunning intervals is 15 days  i.e 30 / 45 / 60 and 75 days. but now the user wants the dunning report 30 / 45 / 60 and 90 days. Instead of 75, they send the last dunning report on 90th day. In dunning procedure

  • Tables for Vendor Totals

    Hi What are the tables for Vendor Totals. Regards Rupal

  • Itunes store does not open

    When I click on Itunes store I get a message that says "One Moment please, connecting to the Itunes Store" but nothing happens. My firewall is not on, I have an Imac (no antivirus software), I rebooted my computer, I uninstalled and reinstalled Itune

  • Apple Video Compressor for iBA?

    Is Compressor - https://itunes.apple.com/us/app/compressor/id424390742 useful for videos in iBooks Author? Or is iBA doing the same job for free?

  • How can I copy linked properties without losing the link to the control?

    I've been dealing with an annoying issue when copying/pasting properties. If the properties are linked to a control when I copy them, they lose that link in the pasted version. Basically, copy/paste is not really following the expected behavior of "c