Need Help using One-Key to make a system back up to DVDs

I bought U330 in Sept and now that I have some of my own programs installed and running, I want to make a backup to D (I think?) and also make backups to DVDs so I could make backups.
I'm no novice, but I cannot figure out the instructions for this.
When I pick Backup, even at Max compression, it says I don't have enough space.   I don't have THAT much on D:---did I need to repartition this before I even started using this computer? Does this mean I can never use One-Key?
When I pick Create Recover Disc (to make DVD backups), what do I do next?
    The dropdown for "Select Source From" has only two options, I am guessing I have to pick "Select another image", but then I don't know what to pick for the Image path.    How do I pick the whole C drive ???   Or??
Please tell me exactly how to do this because I am finding LENOVO's instructions totally inadequate.
A couple times I got to the DVD burner--not sure how--but then it just wanted to burn the sample music files.    I'm feeling quite frustrated--this should not be this difficult!!

I thought you've got error of another type - that error is fixed by simple software update.
Regarding your case - it's always frightening in first time. Believe me - there's completely nothing to be afraid of.
Resizing C drive may result killing your DATA on it only in case of energy is down during the process. Process is taking about 15-20 minutes on slow programs and about 3-4 minutes on fast programs. That means that even having problems with electricity you'll be able to finish everything correctly running on battery.
I'd recommend using Acronis Disk director Suite, but it is not free. One of the best free progs for that are bootable Linux livecds PartedMagic and GParted. They're all intuitive understandable.
You will get your NOVO recovery feature lost after C resize, but you can enable it later, replacing that factory backup in hidden partition with your own backup - your NOVO button will restore your system with all your software and settings.
it will be good for you to start with some basic principles on partitions organization schemes - why, what for and how questions are briefly explained here. After reading this you'll be able to ask right questions to get right answers.
//help will save the world

Similar Messages

I need help using Ultra Key on a green screen clip.

I am using Adobe Premiere Pro CC to edit a blue screen clip, however, once I apply the Ultra key to the clip, I notice that when I start to render (using Adobe Media Encorder CC), the top part of the green screen clip gets blocked (cut off) by the replacement background! I have tried different backgrounds but I keep getting the same chest-to-head level blocked off with the background. When I remove the Ultra Key and render the
clip with it's green screen, then it renders just fine! BELOW IS A SCREEN SHOT OF MY PROBLEM.
Help!!
Thanks, Dru

Today 2014.2 was released. Might want ot update.

HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>

You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend.

Creating a back up using One Key on a new laptop

Hi there, I am trying to set up a new Lenovo laptop. I am being prompted to make a back up by the Lenovo Solution Center. However, when I try to do that using One Key the option comes up to use the default drive which is the D drive. But then it says there is only 22.4 GB of space on the D drive and the estimated image size is 29.0. So it won't let me back up there.
I don't know what to do. Do I need to back this up to an external hard drive? Can the D drive be made bigger? What happens if I don't back up at all? I don't understand why the d drive wouldn't have capacity for the back up. Confused and would be grateful for any advice, thanks

There used to be the Create Recover Disks (DVD's) in Thinkvantage tools. Now whether you have that in on yours remains the question. If its Win8 then it may be different.
I would call the USA support which is posted on this website for country support. You'll get someone else. If your drive image is corrupted the info on there is not much use other than your data. There isn't a one touch that I am aware of. Trueimage is an excellent backup tool worth every penny.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

I need help with Creating Key Pairs

Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC�� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm��9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B��T� xp ��ccR}o��[!#I��lo��
��^"`8�|��Z>��&
d ��"B��
^5��a��jw9��D��D�)�*3/h��7�|��I�d�$�4f�8_�|��yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.

I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
}

I need helping using iAds in my application.

I need helping using iAds in my application. I currently am not using any storyboards. I am using Sprite builder for my UI.
I attatched an image ot show all the different file name I have.
Everyone is being used & they all work fully.
The "iAdViewController.h & .m" files are just example codes I looked up and was messing with so that my iAd can work.

I wouldn't even be able to use the Mathscript node in an executable?
What I am trying to do is make a user configurable data stream.
They tell me how many bytes are in the stream and what parameters they
want to be put in to it. Currently I have to make vi's that are
called dynamicaly to make the parameters.   Then recompile
the code and send it to them. This is somewhat of how the config
file is set up so I know how to make the data.
Data_Type foo
Bytes 30
parameter_name
function
   byte#          format
sync
foo_sync
29               int
time
foo_time
1,2,3,4    double
If I can't use MathScript to allow the user to make there own functions
is there another way that I might be able to do this so I do not have
to recompile the code atleast? Were I might just be able to make
the new function and send that to them.
Any Idea would be great.

Need help using dbms_scheduler to submit an immediate job on the database

Hi. I need help using dbms_scheduler to submit an immediate job on the database. Essentially I want to issue a one-time call to an Oracle Stored Procedure - this procedure will then send an email. I've never used dbms_scheduler before, but here's what I have so far.
So my Program is a stored database procedure named 'TTMS.dropperVacationConflict_Notify', but my problem is that I need to pass 3 parameter values to this job each time I run it. This is what I can't figure out. The procedure expects an 'Id' as number(5), begin_dt as a date, and end_dt as a date.
How do I pass these values when I run my job? Can anyone help?
begin
    dbms_scheduler.create_program(program_name=> 'PROG_DROPVACCONFLICTS_NOTIFY',
     program_type=> 'STORED_PROCEDURE',
     program_action=> 'TTMS.dropperVacationConflict_Notify',
     number_of_arguments => 3,
     enabled=>true,
     comments=> 'Procedure to notify PCM of a Dropper Vacation Conflict. Pass in Dropper Id, Begin_dt, and End_dt');
end;
begin
    dbms_scheduler.create_schedule
    (schedule_name=> 'INTERVAL_EVERY5_MINUTES',
     start_date=> trunc(sysdate)+18/24,
     repeat_interval => 'freq=MINUTELY;interval=5',
     end_date => null
     comments=> 'Runtime: Every day all 5 minutes, forever'
end;
begin
    dbms_scheduler.create_job
    (job_name => 'JOB_DROPVACCONFLICTS_NOTIFY',
     program_name => 'PROG_DROPVACCONFLICTS_NOTIFY',
     schedule_name => 'INTERVAL_EVERY5_MINUTES',
     enabled => true,
     auto_drop => true,
     comments => 'Job to notify PCM of Dropper Vacation Conflicts'
end;
/And I use this to execute the job as needed...
begin
    dbms_scheduler.run_job('JOB_DROPVACCONFLICTS_NOTIFY',true);
end;
/

Duplicate Post
Need help using dbms_scheduler to submit an immediate job on the database

How do I get my previous contacts from mobileme now to the icloud? I need help figuring out how to make that transition?

How do I get my previous contacts from mobileme now to the icloud? I need help figuring out how to make that transition?

Try using the app My Contacts Backup, which will back up your contacts as an attachment to an email. Send this email to yourself, open it on your Mac and double-click the attachment to import them to Address Book (or Contacts if you have Mountain Lion).

Difficulty in using one key rescue

whenever i use one key rescue....it shows windows loading files ang lead me to to a cmd box "x:\windows\system32>" and i dont knoe what to do from here..can anyone come up withs ome help please????

Hi Navneet
Thank you for your post .
To help you further please help sharing few more details .
1. How you are trying to run OKR
2. Have you made any changes to the partition table
3. The system you purchased was with pre installed operating system
Cheers!!!

Best Practice to use one Key on ACE for new CSR?

We generate multiple CSR on our ACE....but our previous network admin was only using
one key for all new CSR requests.
i.e.......we have samplekey.pem key on our ACE
we use samplekey.pem to generate CSR's for multiple certs..
is this best practice or should we be using new keys for each new CSR
also .is it ok to delete old CSR on the lb..since the limit is only 8?..thx

We generate multiple CSR on our ACE....but our previous network admin was only using
one key for all new CSR requests.
i.e.......we have samplekey.pem key on our ACE
we use samplekey.pem to generate CSR's for multiple certs..
is this best practice or should we be using new keys for each new CSR
also .is it ok to delete old CSR on the lb..since the limit is only 8?..thx

Im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this

im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this?

Go to the game's option settings and change the settings to something more to your liking.

Re: Beginner needs help using a array of class objects, and quick

Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
Is there a way to discard and replace a post (with html source code) in the Sun forum ?
Thanks for your help.
Chavada

chavada wrote:
Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
[code]
public class Foo() {
* This is the bar method
public void bar() {
// do stuff
}[/code]

S205 - Steps to create a bootable USB drive using One Key Recovery (OKR) for backup image.

Hi Guys,
I just got my new S205. I am wondering how to backup the Windows OS including all factory settings to a bootable USB drive using One Key Recovery (OKR) 7.0. Basically I am afriad one day, my harddrive is failed or if I want to replace harddrive, I can reimage the harddrive back to factory setting and its OS (win 7). Would you share with me on the steps to do so?
I opened the OKR software and click on "Create Recovery Disk" -> "Factory Default Setting Disk" and Next, I couldn't see my USB drive? any one knows why?
thanks in advance.
New S205 owner.

I was able to do this, but it required reconfiguration of the HDD in my S205 (320 GB hard drive).
I used the built-in Windows Disk Management tool to shrink the size of my C: drive to 56,320 MB. [To accomplish this, I had to disable hibernation, and disable the swap file on the C: drive; and then re-enabled both after the process was complete.] 56,320 MB is more than enough space for the OS and all of the programs that I have installed (including the Professional version of Microsoft Office).
I then increased the size of the D: drive to 233,614 MB.
You can use different drive sizes, of course, but the D: drive must be of adequate size for the backup image.
Once the HDD is reconfigured, you can use One Key Recovery to backup your C: drive to your D: drive. From there, it can be copied to a USB (or copied across the network, etc. ... I've done both). Yes, it is 2 steps, but it's really easy.

NEED HELP!!! Flash Animation (MAC) play back on PowerPoint (PC)

NEED HELP!!! Flash Animation (MAC) play back on PowerPoint
(PC)
Shockwave Flash Animation is complete.
We want to change the Flash Animation w/video (MAC) files to
QuickTime files.
Then change the QuickTime files using Adobe Premiere®
Pro CS3 to an MPG level 1 file (not level 4)
Must be expert in:
Shockwave Flash Animation (MAC)
QuickTime (MAC)
Adobe Premiere® Pro CS3 (MAC or PC)
AdobePowerPoint (PC)
Virtual,Telephone or inperson heip on how to make a Shockwave
Flash Animation (MAC) play back on PowerPoint PC

(This is the Adobe Scout forum for game developers, you should try the Flash Player forum)
To install Flash Player, try this link: http://get.adobe.com/flashplayer/

Do I still need to use the old mobile me backup system for backing up a mac desktop and if I delete it will it affect the memory of my system which has now Maverics

Do I still need to use the old mobile me backup system for backing up all my data and having it able to get at in case of a crash, or can the icloud reset everything? Because I can not find any structured refrence, as to how it would be done. I am updated to Maverics. Also does the icloud continue if I uninstall the backup to free up space?

MobileMe was discontinued in 2012 and all the data stored on it was deleted, and iCloud can't make backups of Macs.
What I recommend you to make backups is to get an external drive and use Time Machine or an application like Carbon Copy Cloner. With this, you can access to your data everywhere and safely, and then, if you want, use a cloud storage service like CrashPlan. You can keep on using iCloud without backups

Need Help using One-Key to make a system back up to DVDs

Similar Messages

Maybe you are looking for