Need help , want to read

Dear Friends ,
I have requirement . I have one View . In this view some step from drop down box. Now on click of this value selected in drop down I want set visiblity or in visibility of Some Transperant container true or false .
Currently , this job I have done in WDDO_INIT of View2 .In that I have filled context node of visibility flag . But problem occurs is though I go back previous view and change value in drop box this time it shows me those Transperant container visible those were there for previous drop down selected.
Which is such method that is called evry time view is called not freshly loaded .
Cheers
Parry

wddo_init is called only the first time for each screen.
You can write the code for visibilty change either in onselection event of the drop down or the inboud plug of the 2nd view...
Also make sure that when you are going back to the dropdown you have restored the original visibility of transparent container.This will ensure that your previously selected visibility options do not appear when you do a selection from drop down next time

Similar Messages

I need help installing Acrobat Reader - messaged failed to connect to a DDE Server. Can't access documents

I need help installing Acrobat Reader - messaged failed to connect to a DDE Server. Can't access documents

Please see if "acrobat failed to connect to dde server" when openning Adobe Acrobat XI PRo helps.

Need help with EXS24 "read velocity range from file name"

I am trying to import 127 drum samples to a single key using the option shown here. The option says "Map to key dropped on and read velocity range from file name". I can find no documentation in the manuals on how to do this. What is the syntax required in the file name to make this work? I need to do several of these imports. The capability is cleary there, but I need help on how the file name should be formatted. My thanks to anyone who can help.

Hi
Not a direct answer to your question, but if you are doing a lot of sample mapping etc, you may want to check out Redmatica's KeyMap Pro or the simpler Keymap 1:
http://www.redmatica.com
CCT

Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of a project im working on. I've tried looking at several labview I2C exampled but find them to be very confusing. I've used an arduino to interface with the sensor successfully but need to use labview and dont understand how to write the program. The actions are simple; I need initialize the sensor with a simple command and then request data from 8 data registers and then read that data. The data will then be used in further calculations. The portion i need help with is writing and reading from the sensor. I've attached the datasheet for the sensor as a guide. I can also provide the arduino code that i use to read data from the sensor if that would help.
Pleae keep in mind that i am completely new to labVIEW. I really do want to learn from this but need quick results so the more help the better. It would greately appreciate any help or explaination.
Attachments:
TCS3414_Datasheet_EN_v1.pdf ‏1806 KB

Hi Aaron,
Here you go, this is made with a USB-8452.
When you run the code tick the power en dac enable box on.
Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
Do you use any fiber hardware with the TCS3414?
gr,
Attachments:
TCS3414.vi ‏63 KB

Need help with Adobe Reader 9

About three weeks ago my computer started acting crazy so I tried to run updates but I could not get on the internet because the comcast guy told me that it was my firewall. So I disabled my firewall and put on windows firewall and was able to do my updates, but then my antivirus quit working so then I uninstalled it and tried to reinstall but I could not. So I got mad and tried to restore to my last restore point but it would not let me, so when I went to run check disk Windows popped up and said it could not perform this action because the disk was busy.So I then called my friend whorepairs computers and he came over and ran combofix and installed a new antivirus. Combofix said nothing was wrong, but I still can't do system restore or checkdiscso I ran MalwareBytes and it comes up with nothing. So now all of a sudden Windows is telling me that Adobe reader 9 is corrupt and unreadable. Everytime I try to uninstall it, it won't let me. Everytime I try to install a newer version I can't because a pop up comes up and says I alredy have the file, but I can't use it to read my PDFs for class. Adobe reader 9 is messing my computer up and I need help removing it?

Hello,this is me again. I ran Windows install utility cleanup and basically uninstalled all Adobe files, but when I was done I went into the program files on C drive to delete Adobe file and it gave me an error that said: An unexpected error is preventing the operation.Make a note of this error code,which might be useful if you get additional help to resolve this problem.Error 0x80070091: The directory is not empty. And I still cannot run check disc because it tells me that the disk is busy.

Need help installing adobe reader... im getting error 1935..

need help on installing adobe reader im getting an error messaage 1935.. pls help

Please confirm the Reader version and the operating system.
You can Follow http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html article.

NEED HELP Problem PLEASE READ!!!!

*All I did was download this album because I wanna go for a run and wanted to quick throw these songs on I downloaded well they came in M4A files so I tried puting them on my ipod 2nd gen nano using Copy Trans Manger thats my ipod manager. They didn't show up so I downloaded a converter and converted all them to mp3 files now I put them on my Manager which is on my ipod.. and they acted as if they were M4A files and didn't show up.. But i converted them to regular mp3 files they shouldv'e shown up what is the problem did it not let me replace the mp3 files with the m4a already on it could that be the problem? Help please iwanna go for a run and I want these mp3's to show up on my ipod... I forgot to say it would of said do you want to replace these files so Idk if thats what happened or not*
Please help me i wanna go for a run and fix this problem
Message was edited by: DarkLegacy24
Message was edited by: DarkLegacy24

You need to be more specific as to what your problem is, that is why no one has responded.
Tell us step by step what you are trying to do, and then people like me can help you.

Urgent!!! Need help in file read/write data to a serial port

Hi,
I really need someone's help in order for me to complete my project. I have attached a vi which I have taken from an example and integrate to my project. In the vi, I have managed to get the encoder counts using Ni 9411. I need to read/write that data from ni9411 to ni9870 without using any serial port as they are connected to a NI 9104 chasis. May I know whether I am correct in writing the data to my ni9870 port using the vi I have attached? Does anyone know how i can convert the number of counts to a 8-bit data/byte so that I can send the data through the RS232 port? I really need someone's help as I need to finished in 2 weeks time.
I have also attached an vi on controlling the epos2 controller using instrument driver. Does anyone know how can i integrate this vi to the fpga vi (the one which I need to read/write data to 9870) as I need to send those data to control my epos2 controller.
Please help me!!!
Attachments:
Encoder Position & Velocity (FPGA).vi ‏23 KB
SINGLEMOTORMODIFIED.vi ‏17 KB

Afai,
As I allready suggested you here, call your local NI Office and ask for assistance!
You really need assistence in a higher level that we can provide via the forums. Otherwise I don't see a chance for you to finish your project in time.
1. Convert I32 to U8 to write it to the 9870 could be done like this:
2. The vi to control the epos2.
There is NO way ( absolutely NO way) to port this vi to FPGA. It's based on VISA calls, uses an event-structure, both are not available at the FPGA.
The only thing you could do is to analyze the VI, the instruction set and design an FPGA vi which handles the specific instructions you would need.
I have no experience with epos2 and I'm not 100% sure if this would work as you would like to use it. And doing this needs deep knowledge of LabVIEW, VISA, Instrument Drivers, the epos hardware, FPGA programming, and so on...
Christian

Need help with Adobe Reader 11.0.0.8 and Group Policy Objects

I am trying to deploy Adobe Reader 11.0.0.8 using Adobe Reader.
I am using the AcroRead.msi I found in
C:\Program Files (x86)\Adobe\Reader 11.0\Setup Files\{AC76BA86-7AD7-1033-7B44-AB0000000001}
HOWEVER
Instead of installing 11.0.0.8 it installs 11.0.0.0
I have not had anyone complain about it asking for an update. But I'm sure it's only a matter of time. (I know about the customization which could prevent the updates, but I can't figure out how to get the correct version installed is the issue not the updates).
So if I run the Setup.exe it ends up installing 11.0.0.8 but AcroRead.msi I think only installs 11.0.0.0
Obviously you can't give a GPO an .exe so it's a closed loop. You can't use an .exe to install the proper version. And you can't install the proper version because you can't use an .exe
You can only use the .msi which apparently only does 11.0.0.0
I've been trying this that, have done jumping jacks and back flips trying to fix this (tried different versions, different approaches to this, nothing seems to work)
Need some help. THIS IS WAYYYYYYY WAYYYYYYYYYYY Overcomplicated btw, shouldn't be this complicated for something so mundane.

A couple of approaches and all involve a bit of work.
Three steps:
Do the install of the 11.0.0 MSI at the command line
Then follow it with the 11.0.07 Updater MSP at the command line
Finally the 11.0.08 Security Patch MSP at the command line.
AIP
Create the AIP from the three files above then then run the MSI from the command line.

I need help with Adobe Reader X......

I'm not sure what is going on, but for a while now (seems like the last two updates to Reader) my Adobe Reader is acting nuts......!!
First of all, I can not seem to get it to work. When I pull up a .pdf file, I can see the file but then when I try to scroll through the various pages I then get an error message that states something about a memory not being able to be read.
Second of all, if and when I can get a file to eventually stay up on the screen, I can not print it. I get another error message stating the there are no pages selected. What.......? This doesn't make sense. Oh, and I tried the "click on advanced and the image thing." Nothing.
What's up with Adobe? Do they realize that hundreds of thousands of us are having troubles out here? Do they really want this product to be downloaded on people's computers? The new version of Reader doesn't work and is crap.........
I couldn't even see and print my Federal Income Tax Return this year because Reader wouldn't let me.
I would add images, but when I attempt to do so I get an error message stating that "an unexpected error has occurred." Do you think?
I tried the "repair" function off of the 'help' button and the control panel as suggested in the webpage, NOTHING....... So many governments, companies, and entities using pdf files for their communications and an idividual can not open them, print them, read them, or use them. What's wrong with this picture?
Is there anyone out there that can help me get my Reader to work? Am I the only one having troubles? Please HELP......!!

Moved to Adobe Reader.
You cannot able to open pdf files on your computer or you cannot open pdf files in your webbrowser? If you cannot open pdfs in your browser, what browser are you using?

New to Mac - Need help - Want to share Printer and Internet with PC

Looking for help in setting up to share my Windows Compaq PC printer and files and internet with my MAC Mini. They sit right next to each other, my PC does not have wireless ability. What equipment and what steps do I need to take to make this happen? I am looking for the cheapest way possible.
Thanks

To share the internet you are going to need the means the connect both the Mac and PC to your internet connection. A router would be the simplest - connect your broadband modem to the router and the computers to the router. Routers are quite inexpensive these days and it is also needed to share a printer with both computers.
This leads us to the printer. Before you think about sharing the printer with the Mac you'll first need to determine the printer has drivers for OS X. If not, there's no easy way to seamlessly print from the Mac to your printer. Note I say seamless. Since all Mac applications can print a PDF file you can print the PDF, transfer the file to your PC, and then print the PDF in Windows.

Need help installing Adobe Reader 11

Adobe Reader will not update. I have tried following multiple forum help suggestions. I have received errors 1302, 1310, and one other. Usually get error 1310. I am running Windows 7 Professional. The downloader will download the files , attempt to install them , gets to 97%-100% completed , then fails. I have tried uninstalling & reinstalling. I have tried using the cleaner to remove all traces of Adobe files. I have tried fixing permissions. I have tried ensuring we are installing as admin. I have disabled Mcaffee Antivirus to install. I have tried installing adobe X (10) - which succeeded installing btw, and upgrading from there. In that case , the update immediately fails. I have gone into my folders to make sure admin has full access to the folder. I have tried downloading and installing multiple times as another post suggested. I do not know what else to do. I can use Adobe X to view my docs but I want to stay up to date security wise. Please help !!!!

Have you tried the offline installer from http://get.adobe.com/reader/enterprise/ ?
If that also does not help, please give us the full 1310 message.

Need help with Adobe Reader App on ipad

Hi, I downloaded the adobe reader app on my ipad recently and saved lots of documents in it under the “Document” tab. I do my backup on iTune regularly. But I am unsure if all my documents in that app will be backup in my iTune. What worries me is that next time when I buy a new ipad, I cannot transfer the documents over. Any help? Or do I have to painstakingly upload them to Acrobat.com? Is that a storage limit for Acrobat.com? Thank you!

Hi Sophieberry,
You can back up your all document via iTunes. Tethered your device with your Desktop/Mac and open up iTunes. Select your device from the left hand window, and go to the apps screen , scroll down to the bottom of the screen, and then select Adobe Reader from the list.Now select all the document and tap on Save to option and enter the location where you want to save the PDF. Hope this will solve your problem of back up.
However, you can back up your file to Acrobat.com and storage limit for this is 2GB.
Thanks
-Satyadev

I need help on a Reader PRS 300

Does the PRS 300 read borrowed library books I am trying to set mine up and have problems anyone there to help?

Hi Idtjohn. What seems to be the issue on your PRS300? You may want to check this link and see if that helps. Thank you.

Need Help With RSS reader...

First off, I'm a beginner. And I would love some help with
this problem.
I've uploaded the RSS reader to my server, designed it, etc.
And It will not load the feeds. I've searched through the forums,
and have come to discover that it is a security issue (one which is
undoubtedly beyond me). Is it possible to get this to work? I read
in a previous post that there is a way to use it with a javascript
code but I'm not sure how to allow this to work.
My site can be found at
http://www.thecassidyfeed.com
I'm fairly confident that all my paths are correct. All of
the files, the javascript files, etc. are located on the root
level. Could it be something with the server? I know that it is
possible that: " url_fopen_disabled " needs to be enabled. My
server is with MediaTemple.
I would very much like to use this framework, and I look
forward to seeing my site up and running. If there is anyone who
would be kind enough to point me in the right direction I would
very much appreciate it.
lauren

If you look at
http://www.thecassidyfeed.com/feeds.php?id=19
you will see something is amiss...

Need help , want to read

Similar Messages

Maybe you are looking for