Need help wiping factory HD

I just replaced the factory HD with a 1 TB HD. I want to use the factory HD as a secondary HD. How do I wipe and reformat the factory drive?

I tried but the erase icon was not highlighted. I used SuperDuper to move all the info off the internal HD onto the new one. I bought an SATA case for the internal HD so I can wipe it, format it, and use it as a secondary drive. Whenever I connect the internal drive back it boots up.

Similar Messages

Need help wiping my hd clean

I have a white macbook, bought in 2007. The OS is 10.6.7. I did that upgrade quite a while ago. I've got a new macbook pro now and I want to wipe the old macbook clean and give it to a friend.
When I went through box of software I have, I found Mac OS9, OS 10.2 and I still haven't found the upgrade to 10.6.7, but I must have it somewhere. In any case, I'd like to set it back to how it came. Are those other two os disks what i need? Can someone run me through the process. I have not found a disk with all the programs. Are they on one of the os disks?
Thanks for any help.

Prepare Your Mac for Sale
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities (Installer menu if using Panther or Jaguar) menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
In order to install Snow Leopard you will need a Snow Leopard installer DVD. To reinstall any pre-bundled software you will need the original installer discs that came with the computer. You cannot install 10.2 on any Intel Mac. If you don't have the original discs you can purchase replacements from AppleCare Customer Support.

NEWBIE THATS NEEDS HELP ( wiped blueberry)

Firstly may i say hi to every one and now to my problem
ok your all going to think im a complete wazzuk
im new to the blackberry (not a clue) i was given an 8800 which didnt come with any disks
but was told i can dl them on this website , which i did..the latest desktop application
anyways....it told me i need to update my phone and like an **bleep** i pressed next
about half way thru the eraseing and downloading my pc came up with an ERROR
and now im left with just a white screen with a small box in the middle and a cross going thru it
can some 1 please tell me i can fix this and how or have i just broken the thing for ever
ive looked on the pc to see if it had backuped up the device(which i dont think it had)
so there must be a way i can download a new os on the blackberry
please can any 1 help
many thanks in advance
Solved!
Go to Solution.

Is your exact model the 8800?
The installation of the Operating system is in the link below along with good instructions.
http://www.blackberryforums.com/general-8800-series-discussion/183426-latest-os-8800-4-5-0-203-4-5-0...
Follow those directions to the point.
If you have a problem connecting to the BlackBerry:
You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT201407 When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course i couldn't without deauthorizing my account then reauthorizing. I need help!

When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course I couldn't without deauthorizing my account then reauthorizing. I need help! I want my ringtones and picturesd back, and can't get them. Does anyone know how to do this given my situation?
Thanks!

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Need help on Self Hosting Using channel Factory

Hello,
     Need Help.
     I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception.
The scenario is something like below this : -
I want to create the endpoint connection to WCF service. I want to achieve this using custom channel factory(not using default channel factory API provided in .Net Framework).
I have written one class and it is derived from channel factory and we are reading the service endpoints, behaviors, bindings from external configuration file added in the project.
I am able to connect to server side service hosted on different machine using following sample code successfully.
In the case of “self-hosting”  I am receiving following error : --
     "There was an error reading from the pipe: The pipe has been ended. (109, 0x6d)."
Below is the code which I have written for self hosting WCF service using custom channel factory.
// Method where I am calling CustomChannel Factory constructor
internal void ProxyCall(string msgEndpointConfigurationName, string url)
            string appConfigDirName, extConfigFilePath;
            FileInfo configFileInfo = new FileInfo(appConfigName);
            appConfigDirName = configFileInfo.DirectoryName;
            extConfigFilePath = appConfigDirName + "\\" + extConfigFileName;
            this.messageEndpointConfigurationName = msgEndpointConfigurationName;
            if (string.IsNullOrEmpty(url))
                this.messageFactory = new CustomChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName);
            else
               //EndpointAddress e = new EndpointAddress(url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new ChannelFactory<IServerOperationsMessage>(this.messageEndpointConfigurationName, e);
               this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, e);
   ClientMessageFormatterBehavior formatterBehavior = new ClientMessageFormatterBehavior();
   foreach (OperationDescription operation in this.messageFactory.Endpoint.Contract.Operations)
    if (!operation.Behaviors.Contains(typeof(ClientMessageFormatterBehavior)))
     operation.Behaviors.Add(formatterBehavior);
   this.messageFactory.Endpoint.Behaviors.Add(new MessageStatisticsBehavior());
   this.messageFactory.Open();
// Custom Channel Factory Class
internal class CustomSelfHostingChannelFactory<T> : ChannelFactory<T>
        /// Custom client channel. Allows to specify a different configuration file
        /// <typeparam name="T"></typeparam>
        private string configurationPath, selectedMsgEndPoint, uriAddress;
        public PPCCustomSelfHostingChannelFactory(string configurationPath, string selectedEndPoint, string uriAddress)
            : base(typeof(T))
            this.configurationPath = configurationPath;
            this.selectedMsgEndPoint = selectedEndPoint;
            this.uriAddress = uriAddress;
            EndpointAddress e = new EndpointAddress(this.uriAddress);
            base.InitializeEndpoint(selectedEndPoint,e);
        //As you can see, a call to the method InitialiazeEndpoint of the base class is required.
        //That method will automatically call to our CreateDescription method to configure the service endpoint.
        ///Loads the serviceEndpoint description from the specified configuration file
        protected override ServiceEndpoint CreateDescription()
            ServiceEndpoint serviceEndpoint = base.CreateDescription();
            return serviceEndpoint;
        private EndpointIdentity GetIdentity(IdentityElement element)
            EndpointIdentity identity = null;
            PropertyInformationCollection properties = element.ElementInformation.Properties;
            if (properties["userPrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateUpnIdentity(element.UserPrincipalName.Value);
            if (properties["servicePrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateSpnIdentity(element.ServicePrincipalName.Value);
            if (properties["dns"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateDnsIdentity(element.Dns.Value);
            if (properties["rsa"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateRsaIdentity(element.Rsa.Value);
            return identity;
        private Binding GetBinding(IBindingConfigurationElement configurationElement)
            if (configurationElement is CustomBindingElement) return new CustomBinding();
            else if (configurationElement is BasicHttpBindingElement) return new BasicHttpBinding();
            else if (configurationElement is NetMsmqBindingElement) return new NetMsmqBinding();
            else if (configurationElement is NetNamedPipeBindingElement) return new NetNamedPipeBinding();
            else if (configurationElement is NetPeerTcpBindingElement) return new NetPeerTcpBinding();
            else if (configurationElement is NetTcpBindingElement) return new NetTcpBinding();
            else if (configurationElement is WSDualHttpBindingElement) return new WSDualHttpBinding();
            else if (configurationElement is WSHttpBindingElement) return new WSHttpBinding();
            else if (configurationElement is WSFederationHttpBindingElement) return new WSFederationHttpBinding();
            return null;
        private Binding CreateBinding(string bindingName, ServiceModelSectionGroup group)
            BindingCollectionElement bindingElementCollection = group.Bindings[bindingName];
            if (bindingElementCollection.ConfiguredBindings.Count > 0)
                IBindingConfigurationElement be = bindingElementCollection.ConfiguredBindings[0];
                Binding binding = GetBinding(be);
                if (be != null)
                    be.ApplyConfiguration(binding);
                return binding;
            return null;
        private void AddBehaviors(string behaviorConfiguration, ServiceEndpoint serviceEndpoint, ServiceModelSectionGroup group)
            EndpointBehaviorElement behaviorElement = group.Behaviors.EndpointBehaviors[behaviorConfiguration];
            for (int i = 0; i < behaviorElement.Count; i++)
                BehaviorExtensionElement behaviorExtension = behaviorElement[i];
                object extension = behaviorExtension.GetType().InvokeMember("CreateBehavior", BindingFlags.InvokeMethod | BindingFlags.NonPublic | BindingFlags.Instance, null,
behaviorExtension, null);
                if (extension != null)
                    serviceEndpoint.Behaviors.Add((IEndpointBehavior)extension);
Thanks in advance !! :-)

Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards

HT6114 I need help hacking into my ipod i forgot the password and i cant factory reset it because the power button is broken?!

I need help hacking into my ipod i forgot the password and i cant factory reset it because the power button is broken?!

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

I'm needing help restoring an iPod touch 5 back to factory settings because I purchased it used

I'm needing help in restoring an iPod touch 5th generation back to factory settings. Because I purchased it used from a family member who can not remember their password or sercuity question answers

They need to call AppleCare, ask to be transferred to the Account Security team.

I need help with my Ipod touch 4th restoring to factory settings

I have posted several posting because I need help but somehow everybody seems to ignore the subject or they just don't want to go there. I wonder why.
Anyways, I'm in critical bind. I still have iTune 10.7 running on my iMac 10.6. However, when I try to synch my Ipod to my Mac I get a message that I need to restore my Ipod to factory settings.
The thing that I'd like to know if I restore to factory settings if I could select which verions iTune I could select. I have 10.7 installed and also have a copy in TM.
I don't want to use iTune V.11

Ana
I appreciate your input, but you still haven't told me how to restore the iPod w/o getting V. 11. So far for what I read it says that if I choose to restore back to factory settings that it will install the latest version of iTune. Is there any way that I can overide this? According to you, it sounds like I could but still you haven't share with me how to do it
Illlaass
Here is the thing I have iTune 10 installed but when I tried to synch the iPod is when I get the message that I have to restore it to the factory setting. I'm willing to go along with it provided that I can select iTune 10.7. I have it installed in my backups.

Hiya there I need help I restored my iPhone 3G and now won't unlock anymore it's at factory settings

Need help big time please

Sounds like you screwed something up when you replaced the back. As the iPhone is NOT user serviceable, there's not much here we users can offer you.
Bring your phone to a 3rd party repair shop and see what they say.

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

BB Desktop Manager no longer works with Mac Maverick - Need Help Urgently

I have been a loyal Blackberry user since the Government of Canada officially began using these cell phones. I feel, however, abandoned by Blackberry (they obviously don't believe that it is easier to retain an existing customer than acquire a new one). I'm using a Blackberry Bold (9900) with a Macbook Pro. Everything was fine until I upgraded my Mac operating system to Maverick; my Blackberry Desktop Manager no longer works, so I cannot sync the content (contacts, calendar) of my phone with my Mac, but that's not the worst of it.
I recently had a momentary lapse and exceeded the 10 password attempts to access my phone... this accidentally wiped my phone clean... and because Desktop Manager does not work with Mac, I do not have a way to recover my data. Rogers was of no help and had Blackberry updated its desktop software months ago, as it should have, this issue would have been moot. I do not know how or why, but I was able to recover most of my data, but I'm not sure just how up-to-date tha data is and am still going through it, but I'm having issues with some functionality.
I'm in the US for several months and have suspended my Canadian services. Prior to the wipe, I was able to use wifi on my phone to send and receive emails with no problem. After the wipe, I can't send emails or bbms. I checked my blackberry internet service and all email accounts are good to go. BBMs are another issue. I need help. Suggestions please.

Apple has ceased synchronization with Mavericks. The issue lies with Apple, not with the desktop software. To mitigate the lack of sync capabilities in Mavericks you can sync your contacts and calender on your Mac with the usual suspects (Yahoo, Google). Create a backup (archive) for Contacts and Calender on your Mac first, then create one of those email accouonts that allow syncing. On your 9900 and with BlackBerry provisioning enabled create the new or existing email account. See which email accounts can sync with BB, I know Yahoo is working fine. For Yahoo, get the Yahoo Calender sync (a few bucks one-off payment required), Contacts sync works off the shelf within BB. If you reset the 9900 you should be able to restore all data with BB DTM. Please note that emails you received during the 9900 reset and the date of restore will not be available on the device. You will still not be able to sync contacts/calender over BB DTM. I hope that helps.
BlackBerry Bold 9900, Blackberry Z10 and BlackBerry PlayBook.

My iPod touch 4 generation 32gb sometimes is really slow and when ever I get on a app it will shut it down. My lock botton is broken and I use the accesery botton to lock it. That being said I can't power down my iPod. I need help, I don't know what to do

My iPod touch 4 generation 32gb sometimes is really slow.When ever my iPod is being slow and I get on an app the app will shut down. My lock botton is broken and I use the accesery botton to lock it. That being said I can't power down my iPod. I need help, I don't know what to do! Could you tell me how I can power down my iPod or how I can fix the slowness and the shutting down of the apps.

- Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
- Next, reset the iPod
To reset the iPod without the hardware buttons,
Reset network settings: Settings>General>Reset>Reset Network Settings. All your wifi and bluetooth preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected. You will have to rejoin wifi networks and repair BT devices
Then you can try:
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Error in deploying my spring web app, really need help?!

I am using eclipe 3.3.0 and tomcat 5.5.23, spring 2.0.6
And I get this error while deploying.
Can anyone tell me where it is comming from and what i should do to fix it?
If you need any more info please ask that too, I really need help..
I have browsed all over the internet, but found nothing really helpful..
In my browser I get a Http status 500 error:
exception
javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
root cause
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
And this is what I see in the console:
10-sep-2007 14:16:11 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jre1.6.0_02\bin\client;C:\Program Files\Java\jre1.6.0_02\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\maven\maven-2.0.7\bin;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\;C:\Java\SDK\bin;C:\maven\maven-2.0.7\bin;C:\apache-ant-1.7.0\bin;C:\spring-framework-2.0.6
10-sep-2007 14:16:11 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:11 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 4312 ms
10-sep-2007 14:16:12 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
10-sep-2007 14:16:12 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
10-sep-2007 14:16:12 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
log4j:WARN Please initialize the log4j system properly.
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SpringBikeApp,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet /SCWCD threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SCWCD,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:15 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
10-sep-2007 14:16:15 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/187 config=null
10-sep-2007 14:16:15 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
10-sep-2007 14:16:15 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3578 ms
Many Thanks in advance for any help!!
Grz Barbera

hi istvan,
we are also migrating from websphere to netweaver.
But in spring framework we r facing problems.
We hav spring-beans.jar file in lib dir of Web Application. But When we are creating BeanFactory from xml as,
BeanFactory beanFactory = new ClassPathXmlApplicationContext ("client-config.xml");
clent-config.xml file contains :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
<beans>
     <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" >
          <property name="location">
               <value>conf/service-client/client.properties</value>
          </property>
     </bean></beans>
But code is giving exception: ClassNotFoundException -org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.
Wat is the problem ?
Kindly help.
We are also using JAAS for authentication.We are refering above code from our LoginModules login() method.
Regards,
sagar.

I need help with a backup file that was deleted and now undeleted from my hard drive

Last month (May 6, 2011), I was updating my iPod Touch 4G with the new software that came out. I always make a backup of my iPod's data before I update it. While my iPod was updating I left my iPod and computer alone and was doing things around the house with my mom. And when I was done I went in my room to see if it was done and my computer decides that it was going to freeze and crash on me (with my iPod plugged in and stuck on the updating or verifying software mode.) I managed to get my iPod back to working condition again but losing everything on my iPod. I formatted my computer hard drive but I managed to get back the backup I lost. I need help on getting the backup into iTunes so I can get my data back. I am not Jailbroken and I plan not to Jailbreak. I however saved the backup file in a folder other than the Mobilesync folder. I am also running on Windows XP. Someone please help me and thank you in advance!

I was able to backup my iPod and I tried to restore my iPod again and it goes through the process and everything but it restores the temporary data that I had on there. It didn't restore application data or the current photos and videos that I had saved in Camera Roll before this all had happened. It is almost like it goes back to factory settings but I have some photos that were saved on the other backup that I was temporarily running on. The backup that I am looking to restore is the only backup file in the Mobilesync folder as of right now the others are saved somewhere safe for right now. Why doesn't it restore my application data or my Camera Roll pictures and videos that I saved before my computer crashed last month? Can this problem be fixed?

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Need help wiping factory HD

Similar Messages

Maybe you are looking for