Need Help Witgh OMF and DAT SPDIF

Hi,
I need to digitise a recording of a ballet performance (symphony orchestra & ambiance). The recording was done on DAT and the Final Cut edit will be OMF. I will get OMF and audio files + DAT tape.
My questions are:
1. If I hire a timecoded DAT player, how can I sync it up to Logic?
2. I use an MBox V1 and it has SPDIF. Can I use that to sync?
3. Will Logic import OMF from Final Cut?
and finally...
4. Can I 'render' the final mix and save that as both OMF as well as have a stereo bounce?
Any advice would be greatly appreciated.
ken

I'm sure there will be others with more knowledge of such things...
...but one way would be to use RandomAccessReadWriter()
HTH
Poot

Similar Messages

I need help quick - battery and data - solutions please?

I have an iPhone 4 here in Canada on the Telus network.I have upgraded to iOS6. The last 4 days the battery has been draining very quickly, by 2pm its less than 10%. The phone is also getting very hot. Today I received a message that I have used 95% of my 1 GB of data, a message I have never seen before.
So far I have:
-turned off almost all notifications
-turned off locations in almost all apps (maps of little value without it)
-changed from push email to fetch
-deleted all recently added apps
Any thoughts on how to rectify the issue?

To start with, the SprymenuBar is not suited for touch screens, it will not work.
You are better off using a jQuery or a commercial menu.
Even then, you must provide the styling rules for the different widths. Fixed widths, such as those in the SpryMenuBar are a no no.
Have a look here http://www.projectseven.com/products/templates/pagepacks/css-builder2/index.htm to see what happens when you go to narrower screens sizes or here http://foundation.zurb.com/page-templates/homepage-1.html. The former is a commercial product, the latter is free of charge.

Need help in formatting the Date - Date does not

Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PM

Your syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck!

Need help in logging JTDS data packets

Hi All,
I m having web application which uses SQL Server database.
I have to find out some problems in database connection for that there is need to log the jtds data packets.
I have tried to use class net.sourceforge.jtds.jdbc.TdsCore but in constructor of TdsCore class there are two parameters needed one is ConnectionJDBC2 and another is SQLDiagnostic.
I have tried a lot but it did not allow me to import class *SQLDiagnostic*.
I need help in logging JTDS data packets. If there are any other ways or any body having any idea about logging JTDS data packets/SQLDiagnostic.
Please reply it is urgent...!!
Thanks in advance......!!

if you want to use log4j then,
in your project create a file called log4j.properties and add this
# Set root logger level to INFO and its only appender to ConsoleOut.
log4j.rootLogger=INFO,ConsoleOut
# ConsoleOut is set to be a ConsoleAppender.
log4j.appender.ConsoleOut=org.apache.log4j.ConsoleAppender
# ConsoleOut uses PatternLayout.
log4j.appender.ConsoleOut.layout=org.apache.log4j.PatternLayout
log4j.appender.ConsoleOut.layout.ConversionPattern=%-5p: [%d] %c{1} - %m%n
log4j.logger.org.apache.jsp=DEBUG
#Addon for
com.sun.faces.level=FINEGo to your class and add this line
private static final Logger logger = Logger.getLogger("classname");and then you can use
logger.info();
logger.error();
methods

Need help in loading master data.

Hi everyone,
I am just a beginner in BI 7.0 . I know Bw 3.5 . I need help in loading master data(flat file) in a step by step manner.
Before posting this forum i searched and checked out other related forums too, as i am a beginner i am unable to follow them. Lots of the forums gave the help.sap.com link which i used and got a little help but not fully, so please don't send that link. I need a step by step guideline from somebody, which says everything from the beginning till monitoring say like
e.g.. 1) create a InfoObject by right clicking on InfoObject catalog.
something like that.
please help me get a clear and detail step by step procedure to load a master data (Flat File should be good) which may help me get a start will other things without much help.
Please help me learn.
Thanks.
Ranjani.

HI,
Thanks for your reply. This is what i did.
1) Created a Info Area.
2) Created Info object catalog & activated
3) created info object with nothing except some 4 attributes.
4) Created Application compound in Infosource tab.
5) Right clicked on Application compound and chose create Infosource in which chose a option with 3.x and chose the flexible update and gave the info object name.
6) In info provider tab , in the Info Area right clicked and chose the Insert char as data target option.
Now, i am stuck. I have no idea what to do next.
I know i have to create a transformation - There are two tabs in Transformation box, what should i do there.
Please help me from point 6 to cont., to load the data.
Thanks.

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165

Please do not share serial numbers or Order numbers on Forums . Serial numbers and order numbers are very confidential.
You can only share serial number with Adobe Customer support staff.

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: Serial number removed by moderator

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: <Serial number removed by moderator>

Hi There,
Kindly try: Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Thanks,
Atul Saini

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

I need help from chile and use a language translator to write and not turn my iphone4

I need help from chile and use a language translator to write and not turn my iphone4

http://support.apple.com/kb/TS3281
Not turn on

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

Need help in fetching requested data from JSP

Hello,
I really need help in fecthing requested data from JSP to servlet. Can anyone assist me as soon
as possible because I must finish my program by today.....( 20/02/2002).
Thanks in advance.

It is very likely that somebody can help you, if you say what your problem is. In fact somebody might already have helped you. What is your problem?

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.

HT1338 Need help locating where and how to update Mac OS-X 10.6.5 to the latest Mountain Lion Software...thanx John

I need help locating where and how to update Mac OS-X to Mountain Lion.....Thanx....Jay

First update your 10.6 version to 10.6.8 from the software update under the Apple Menu.
This will add direct access to the Mac App store via a new application.
Now launch the App Store from your Applications folder - Its the new icon a letter A formed from a ruler pencil and pen on a blue circle !
Once launched you need to add your iTunes account details or create an account add payment details etc...
Sign in purchase download and follow install processes to upgrade to 10.8 Mountain Lion.
OH and to be safe BEFORE you install backup your current system to an external drive !

Need Help Witgh OMF and DAT SPDIF

Similar Messages

Maybe you are looking for