Need help with 1 problem and 1 question..

Does anyone else notice their calls dropping often with the fascinate? I'd say 1 in every 5 or 6 calls is dropped and I live in an area where my old VENUS never dropped calls.
Also -and I'm sure this has been asked- when we get the froyo update PLEASE tell me it will allow us to get rid of some of the stupid apps we can't uninstall for example kindle, tetris, nfs shift?...

Have you tried *228 option 2? The radio in the Fascinate seems to be noticeably weaker than other phones signal wise but I haven't dropped any calls from it though.
Have you tried *228 option 2? The radio in the Fascinate seems to be noticeably weaker than other phones signal wise but I haven't dropped any calls from it though.
It's unlikely that verizon will allow you to remove those apps once the Froyo update comes. If it's there now, it'll probably be there after the update with even more bloatware.
Have you tried *228 option 2? The radio in the Fascinate seems to be noticeably weaker than other phones signal wise but I haven't dropped any calls from it though.
It's unlikely that verizon will allow you to remove those apps once the Froyo update comes. If it's there now, it'll probably be there after the update with even more bloatware.
hmm...not sure what's going on with my post.

Similar Messages

Need help with rescue email and security questions

I accidentally entered the wrong rescue email address while setting up my account, now I can't remember the answers to my security questions. Is there any way to reset my rescue email without answering the questions? I can't purchase anything on my new Mac until this is corrected.

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Need help with daq problem

Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
Ken

Hallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Deperately need help with my iPod and Pioneer Car Stereo

I just bought Pioneer's newest deck from Best Buy. The Model number of the deck is DEH-P6800MP. It has a mini jack (2.5 mm stereo jack) on the front of the deck that you can plug your iPod into. I purchased the little adaptor that allows me to just plug the iPod in using the Headphone Jack. It works great. I can use my click wheel to navigate the menus and the sound is awesome...except for one thing, it only plays through the right side speakers. I thought maybe the Fader needed to be adjusted on the deck but everything is dead center. I thought maybe something was wrong with the deck but the Tuner and CD player both work perfectly. I even tried using different cables with no success. When I called Best Buy they told me they were familiar with the problem and to download the newest software for my iPod and it should fix it. It didn't! I am so frustrated by this. I paid alot of money for this deck thinking I wouldn't have to buy any additional interfaces and would never have to deal with an FM transmitter again. Can anybody help?
Fifth Generation 60 Gig iPod Windows XP

After plugging my walkman in and experiencing the same problem, I figured it must be the adaptor. I went to the local Radio Shack and picked up a mini-jack adaptor that was indeed Stereo. Thankfully it worked!!! I can't tell you how happy my family and I are to have all our music available in the family vehicle. Thanks for your help and @#$% Best Buy for selling me not one but two car stereos under the false pretense that I wouldn't need anything else to hook-up my iPod and then not having any idea how to help me when I needed it.
Windows XP

Need Help with Scrolling Problem

I have a JTree displayed in scrollpane. Based on search criterial I select the nodes where the search criteria is found. If the match is located off the screen further down into the tree, the node is highlighted but the scrollpane doesn't automatically scroll down to show it. Any help with this problem is appreciated.

Wow.. Thanks. I thought I would need some fancy code to handle this problem. scrollPathToVisible did it for me. Thanks.

Need help with show/hide and layers moving

I'm more of a designer, so I don't know code or CSS well at
all. I'm doing an online portfolio for a class and need help with
layers not staying in place in different browsers. The portfolio is
created with a table, but I wanted to use the show/hide function
for thumbnails of work. Are layers the only way you can use this
function? I read layers don't work well with tables, so how else
can I make it so when you mouse over a thumbnail, the larger image
appears in another cell?

> I don't know code or CSS well at all.
That's unfortunate.
> layers not staying in place in different browsers.
Layers don't move. But the rest of your page does.
Before you get too wrapped up in layers, though, please read
this -
http://www.great-web-sights.com/g_layerlaws.asp
They are not good when be used as a primary layout method.
> I read layers don't work well with tables
They work fine with tables - but you have to understand both
tables and
layers to use them.
Why not show us your page, so we can see what you are
struggling with?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Bobbi67" <[email protected]> wrote in
message
news:ertd9h$h3m$[email protected]..
> I'm more of a designer, so I don't know code or CSS well
at all. I'm doing
> an
> online portfolio for a class and need help with layers
not staying in
> place in
> different browsers. The portfolio is created with a
table, but I wanted to
> use
> the show/hide function for thumbnails of work. Are
layers the only way you
> can
> use this function? I read layers don't work well with
tables, so how else
> can I
> make it so when you mouse over a thumbnail, the larger
image appears in
> another
> cell?
>

I made my main account a parental control account and when I accessed the account created as admin, at the Parental Control options I deleted my main account and now I can't get back in it. I need help with this problem.

I made my administrator account a parental control account, at the time of creating it, the system asked for my administrator password, to restart the computer, and the new account was created. When I accessed that account at the parental control menu I could see my main account on the list and i deleted the account from that list, and now i'm trying to get back to it but I'm not able to because every time i restart the computer brings me back to the account I created. I searched for help on the web and it says to go to users and select the account I want to restore but I can't do it. Please help.

User account – restore missing admin

Need help with Apple ID and broken phone problem!!

My iPhone is broken and apple are goin to exchange it for a new one. Thing is before they do this they need my apple I'd and password. I thought I had forgot and wouldn't mind as av had two id's. Now I think I might mind it, but since I can't check my phone is there any other way of finding out if this is the one connected to my phone? Maybe by seriel number or phone number..

Welcome to the Apple Community Frances.
You may be able to find your Apple ID at Look up your old and forgotten Apple ID

I need help with simple problems. im a student.

i'd like to be advanced with my studies so i will post questions.. i need help on how to answer. thank you.
1. create a java program that will evaluate if the value entered is a positive, negative, vowel, consonant and special characters.
im actually done with the positive and negative using if else statements.. i used an integer data type. now my question is how do conjoin the characters when i need to evaluate a vowel and a consonant. i cant use char either. please help. i dont know what to do yet.
2. create java program that will translate the input from numbers to words. e.g. input:123 output: one hundred twenty-three.
i have an idea to use a switch case statement. but i have no idea on how will i be able to do it. so if you guys can help me.. well then thankies..

Welcome to the Sun forums. First, please note that you have posted in the wrong forum. This forum is for topics related to Sun's JavaHelp product. You should post your questions in the New to Java forum.
As part of your learning, you will have to develop the ability to select an approach to a problem, create a design that reflects that approach, and then implement the design with code that you create.
So, it's inappropriate for us to take the problem statement that you have been given and short-circuit your learning process by giving you the implemented problem solution. We can comment on the individual questions that you may have, and point out problems and errors that we see in the code that you develop.
As a hint, when you are stuck, forget about Java and programming. Just start with a sheet of paper and a pencil, and figure out how to layout the task on paper. The consider how to translate that to programming.
If you have problems, post short example code that shows the problem, and explain your question clearly. We can't read minds.
Make sure you post code correctly so that it's not mangled by the forum software, and so that formatting is maintained. Select your typed or pasted code block and press the CODE button above the typing area.

Need help with hearing Skype and Steam chats at th...

When im using skype and using steam (a gaming app) i cant hear my skype friends through my headphones and i need help
Subject/title expanded from "Help."

Hi, Natasharocks11, and welcome to the Community,
I could not detect from your post precisely what the problem with your account is. Please kindly post back with details as well as any error messages you may be seeing.
Thank you,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Need help with 1 problem and 1 question..

Similar Messages

Maybe you are looking for