Need help with 3 column fixed in internet explorer

Hi, I'm having a major problem that won't go away. I'm using
an 3 column fixed style sheet, which renders fine in Safari and
Firefox, but won't in Internet explorerer. I always get about a
10px space between the left column and the content area that is
transparent. ( you can see the background.) Also the spry menu bar
is off to the right on i.e. ( don't know if that info. matters or
not) ANY suggestions would be appreciated! Tim from this forum has
been more than kind and re-wrote the whole code for the page. The
copy he sent me rendered fine, but when I deleted my files and
added his still had the problem. ( only this time the space is on
the left, last time on the right.) He did get the spry tabs to work
for me! I'm sure it's something stupid I'm missing on my end. Tim
is unbelieveably talented and way too nice to help me like this.
Anyone have any suggestions so I can leave poor Tim alone for a
little while!!! Thanks much

Hello,
Somehow a LOT of whitespace got added into a number of tags
in the code in
your copy vs the one I sent.
I removed it all and it works fine.
I sent you the page again.
Take care,
Tim
"kidcoconut" <[email protected]> wrote in
message
news:fpjs9q$8ns$[email protected]..
> Hi, I'm having a major problem that won't go away. I'm
using an 3 column
> fixed
> style sheet, which renders fine in Safari and Firefox,
but won't in
> Internet
> explorerer. I always get about a 10px space between the
left column and
> the
> content area that is transparent. ( you can see the
background.) Also the
> spry
> menu bar is off to the right on i.e. ( don't know if
that info. matters or
> not)
> ANY suggestions would be appreciated! Tim from this
forum has been more
> than
> kind and re-wrote the whole code for the page. The copy
he sent me
> rendered
> fine, but when I deleted my files and added his still
had the problem. (
> only
> this time the space is on the left, last time on the
right.) He did get
> the
> spry tabs to work for me! I'm sure it's something stupid
I'm missing on my
> end.
> Tim is unbelieveably talented and way too nice to help
me like this.
> Anyone
> have any suggestions so I can leave poor Tim alone for a
little while!!!
> Thanks much
>

Similar Messages

Need help with column formatting (see image)

I am trying to make a spreadsheet that calculates proportional image sizes of a fixed original size. I have it set up so you enter an original size on the left (see image below) and the spreadsheet calculates the proportional sizes on the right (in the pink column). I would like to know how to get Appleworks to re-list the proportional sizes while omitting the size pairs that = 0. Basically i want to display the proportional sizes in a new column without the zeros. This way the proportional sizes list is much smaller and easier to read.
Thanks for any help
morgan
g5 Mac OS X (10.4)
g5 Mac OS X (10.4)
g5 Mac OS X (10.4)

Part 2
The method indicated in your original spreadsheet, and after the refinements suggested earlier, is essentially a sieve—calculate all the values, then strain out the chaff (ie. the results with non-integer values for one or both dimensions).
A more efficient approach is to calculate and display only the cases where both dimensions are integers.
Here's one way. You may want to move some of the calculations and revise the formulas accordingly.
Data Entry:
Cells B4 and C4 are used for data entry, as in the original.
Initial calculation: Find the LCF (largest common factor) Columns J, K, L and cell M1.
J1: =(B$4/ROW())=INT(B$4/ROW())
K1: =(C$4/ROW())=INT(C$4/ROW())
L1: =IF(J1+K1=2,ROW(),"")
Fill these three columns down to the largest short side dimension you expect to use (ie. if you'll use 39 x 78 inch original images, fill down to row 39).
What the formulas do:
J1: The ROW() function returns the number of the row in which the formula is located. B$4/ROW() divides the number in B4 by the number of the row. INT(B$4/ROW()) does the same division, then strips off any fractional part of the result. The second = sign is a comparison operator. The formula compares the results of the parts on each side of the sign and, if they are equal, returns TRUE (or 1), and if they are not equal, returns FALSE (or 0).
For the example (6), the formula would return TRUE in rows 1, 2, 3 and 6, marking the four factors of 6.
K1: Does the same, but for the number in C4.
For the example (8), the formula returns TRUE in rows 1, 2, 4 and 8, marking the four factors of 8.
L1: This IF() formula checks for common factors. If the cells in both columns (J and K) in a particular row contain TRUE (ie. the number of that row is a factor of both the number in B4 and the number in C4), then the sum of the two cells will be 2 (TRUE=1, FALSE=0, TRUE + TRUE = 2), and the formula will return the result of the ROW() function (ie. the number of the row). For any other result, the formula will return 'empty' (ie. what's between the two double quotes "" ).
For the example, cells L1 and L2 will contain 1 and 2 respectively; the rest of the cells in column L will be empty.
M1: =MAX(L1..L39)
M1: This formula completes the search by picking off and returning the greatest number in column L, or the Largest Common Factor for the two numbers. Adjust the second cell reference in the formula to reflect the largest original image size you'll use.
Final Calculations
D4: =B$4/$M$1*(ROW()-3)
E4: =C$4/$M$1*(ROW()-3)
D4: The formula divides the number in B4 by the LCF determined above to determine the size increment that will give integer results for both dimensions of the final image(s). It then multiplies that increment by 1 in row 4, by 2 in row 5, by 3 in row 6, and so on, for as many rows as you wish. The -3 in the second part of the formula is an offset to make the value of the multiplier three less than the row in which the formula is located.
E4: Same formula, but acting on the number in C4.
The first five results for the example ( 6 and 8) are:
3 4
6 8
9 12
12 16
15 20
and for a 4 x 6 initial image:
2 3
4 6
6 9
8 12
10 15
Regards,
Barry

Jtable need help with column name

hi, i'm currently working on a project where my jtable grab data from the database.
as for the where clause i am thinking if i can get the column name as the field name in the table. However, I would like to hide the field name from the user.
So, I'm here to kindly ask if there is a way that i can display the column name that is hidden from the field name.
thanks in advance.

actually, I am thinking of a lazy way to add the 'where' clause for my sql statement.
so, instead of detecting which column that is related to the field i can just use the columns header name as my field. But on the other hand, I'd like to hide my field name from the user .
For say my field name is "emp_no" but it is displayed as "Employee No" to the user. and when i do my sql statement i can do something like this:
select * from emp_details where + jtable.getcolumnname(i).tostring() + = jtable.getvalueat(j,i)
is there a way i can do it so???
thanks again. and thanks for the reply

Need Help with Column Masking

Hi All,
I am looking for Masking options/techniques to mask few columns.
I am aware of the option Oracle Data Masking Pack. But its costly. Can you please suggest some other way/technique using which I can achieve this?
Thanks in Advance

You can always try manual masking using datapump and sql and pl/sql (export original data and then create function that will put some random/other data instead of real ones). I have seen some clients that have implemented this type of masking. However, be aware that this will not give the best results, and that it will not come anywhere near quality of Oracle Data Masking Pack's masked data.
Zoran

I need help with my shockwave flash it is crashed i need help fixing

I need help with shockwave flash it is crash i need help fixing it

http://forums.adobe.com/thread/1195540

Need help with Pivoting rows to columns

Hi,
I need help with pivoting rows to columns. I know there are other posts regarding this, but my requirement is more complex and harder. So, please give me a solution for this.
There are two tables say Table 1 and Table 2.
Table1
name address email identifier
x e g 1
f s d 2
h e n 3
k l b 4
Table2
identifier TRno zno bzid
1 T11 z11 b11
1 T12 z12 b12
1 T13 z13 b13
2 T21 z21 b21
2 T22 z22 b22
As you can see the identifier is the column that we use to map the two tables. The output should be like below
output
name address email identifier TRno1 zno1 bzid1 TRno2 zno2 bzid2 TRno3 zno3 bzid3
x e g 1 T11 z11 b11 T12 z12 b12 T13 z13 b13
f s d 2 T21 z21 b21 t22 z22 b22
Also we do not know exactly how many TRno's, zno's, etc each value in the identifier will have. There may be only 1 TRNO, zno and bzid, or there may be four.
All the values must be in separate columns, and not be just comma delimitted. There are also other conditions that i have to add to restrict the data.
So, can you please tell me what is should use to get the data in the required format? We are using Oracle 10g. Please let me know if u need any more information

Something like this ?
SCOTT@orcl> ed
Wrote file afiedt.buf
1 select a.name,
2 a.address,
3 a.email,
4 b.* from (
5 select distinct identifier
6 ,max(trno1) trno1
7 ,max(zno1) zno1
8 ,max(bzid1) bzid1
9 ,max(trno2) trno2
10 ,max(zno2) zno2
11 ,max(bzid2) bzid2
12 ,max(trno3) trno3
13 ,max(zno3) zno3
14 ,max(bzid3) bzid3
15 ,max(trno4) trno4
16 ,max(zno4) zno4
17 ,max(bzid4) bzid4
18 from (select identifier
19 ,decode(rn,1,trno,null) trno1
20 ,decode(rn,1,zno,null) zno1
21 ,decode(rn,1,bzid,null) bzid1
22 ,decode(rn,2,trno,null) trno2
23 ,decode(rn,2,zno,null) zno2
24 ,decode(rn,2,bzid,null) bzid2
25 ,decode(rn,3,trno,null) trno3
26 ,decode(rn,3,zno,null) zno3
27 ,decode(rn,3,bzid,null) bzid3
28 ,decode(rn,4,trno,null) trno4
29 ,decode(rn,4,zno,null) zno4
30 ,decode(rn,4,bzid,null) bzid4
31 from (select identifier,
32 trno,bzid,zno,
33 dense_rank() over(partition by identifier order by trno,rownum) rn
34 from table2)
35 order by identifier)
36 group by identifier) b,table1 a
37* where a.identifier=b.identifier
SCOTT@orcl> /
NAME       ADDRESS    EMAIL      IDENTIFIER TRNO1      ZNO1       BZID1      TRNO2      ZNO2       BZID2      TRNO3      ZNO3       BZID3      TRNO4      ZNO4       BZID4
x          e          g          1          T11        z11        b11        T12        z12        b12        T13        z13        b13
f          s          d          2          T21        z21        b21        T22        z22        b22
SCOTT@orcl> select * from table1;
NAME       ADDRESS    EMAIL      IDENTIFIER
x          e          g          1
f          s          d          2
h          e          n          3
k          l          b          4
SCOTT@orcl> select * from table2;
IDENTIFIER TRNO       ZNO        BZID
1          T11        z11        b11
1          T12        z12        b12
1          T13        z13        b13
2          T21        z21        b21
2          T22        z22        b22
SCOTT@orcl>Regards
Girish Sharma

Need help with complex column creation command

Hello, all
I need help with a complex column creation command and SQL anywhere help is not sufficient for it.
Here is the situation:
I need to write a generic DDL "alter table" command, which can add/modify columns without knowing in advance if they already exist in the destination table.
Is there a command, which looks like:
alter table "table1" add (on existing modify) column1 <datatype> <default> ?
Thank you,
Arcady

Hi.
I don't think this is supported in alter table command. But you can code that inside an if statement which queries systables & syscolumns. Your code should be something like that:
if (select count(*) from sysobjects, syscolumns where sysobjects.id = syscolumns.id and sysobjects.name = 'some_table' and syscolumns.name = 'some_column') < 1
begin
alter table some_table add some_column numeric(12) not null
end
This is an example..
Andreas.

I need help with adobe iv reader.

iam trying to pin a website using ie.it says the reader cannot read the website,i am not computer saavy so i donot know how to fix this issue, pls help,tyvm.

i am trying to pin a website in internet explorer to my task bar,i get a
message that adobe v1 could not decode the website, i am not computer saavy
so i don't know what that means,plus this is a new computer 4 me.plus it
worked fine a few days ago. tyvm 4 ur help.
regards,
ray nist
In a message dated 6/11/2013 9:27:11 P.M. Eastern Daylight Time,
[email protected] writes:
Re: i need help with adobe iv reader.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5400013#5400013)

I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my work server (Microsoft server) and Online Business Banking system. How do I do it if Internet Explorer is not supported on Macs?

I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my remote work server (Microsoft server) and Online Business Banking system (Bank of America Cash Pro). How do I do it if Internet Explorer is not supported on Macs? Is there another option? Please help.
I also feel like such a moron as I am really new to Apple computers and don't even know what operating system I am using. The below is what I have. Sorry to all that are well beyond me in the Mac world. Have been a windows user for my whole life and haven't quite figured out where to find everything I need on my new laptop yet. Thanks!
With the following configuration:
PROCESSOR     065-0154     2.7GHz Dual-core Intel Core i7
MEMORY     065-0156     8GB 1333MHz DDR3 SDRAM - 2x4GB
HARD DRIVE     065-0159     750GB Serial ATA Drive @ 5400
OPTICAL DRIVE     065-0161     8x Double-Layer SuperDrive
DVI Adapter     065-0162     None
VGA Adapter     065-0164     None
REMOTE     065-0166     None
Apple Software - iWork     065-7672     No iWork preinstalled
Apple Software - Final Cut Exp     065-7682     Final Cut Express preinstalled
Apple Software - Aperture     065-0338     Aperture preinstalled
Apple Software - Logic Express     065-7675     No Logic Express Preinstalled
Apple Software - Filemaker     065-8307     No FileMaker Preinstalled
Apple Software - MS Office     065-0278     MSO-HOME & BUSINESS EDITION
KEYBOARD AND DOCUMENTATION     065-0172     Keyboard/Users Guide
COUNTRY KIT     065-0175     Country Kit

If you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/     Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers,

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Hi headshot, <br /> Sorry you are having problems.
Are you seeing any error message or notification ? <br />If so what ?
If the page fails to load try clearing Reloading with the Ctrl F5 shortcut to force loading without the old new cached files. If that does not help try cache and clearing cookies for that site.
* Also see [[Websites don't load - troubleshoot and fix error messages]]
* [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
I have reset IE9. Same problem.
I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
Any suggestions for how to solve this (other than using software rendering)?

Thanks again for your reply. I appreciate the time you have taken to respond.
I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
2. Use another browser - I have no problems with either Firefox or Chrome

Need help with conditional query

guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
    "FGL_GRNT_CODE" VARCHAR2(60),
    "FGL_FUND_CODE" VARCHAR2(60),
    "FGL_ACCT_CODE" VARCHAR2(60),
    "FGL_ORGN_CODE" VARCHAR2(60),
    "FGL_PROG_CODE" VARCHAR2(60),
    "FGL_GRNT_YEAR" VARCHAR2(60),
    "FGL_PERIOD"    VARCHAR2(60),
    "FGL_BUDGET"    VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH     got_greatest_year     AS
     SELECT     fgl.*     -- or whatever columns are needed
     ,     MAX ( CASE
                 WHEN fgl_period = :given_period
                 THEN fgl_grnt_year
                END
              ) OVER ()     AS greatest_year
     FROM     fgl
SELECT     SUM (fgl_budget)     AS total_budget     -- or SELECT *
FROM     got_greatest_year
WHERE     (     fgl_grnt_year     = greatest_year
     AND     fgl_period     = :given_period
OR     (     fgl_grnt_year     = greatest_year - 1
     AND     fgl_period     = 14
;Miguel

Hi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH     got_greatest_year     AS
     SELECT       TO_NUMBER (fgl_grnt_year)     AS grnt_year
     ,       fgl_period
     ,       TO_NUMBER (fgl_budget)     AS budget
     ,       MAX ( CASE
                   WHEN fgl_period = :given_period
                   THEN TO_NUMBER (fgl_grnt_year)
                  END
                ) OVER ()     AS greatest_year
     FROM       fgl
,     got_cnt_00     AS
     SELECT     grnt_year
     ,     fgl_period
     ,     budget
     ,     greatest_year
     ,     COUNT ( CASE
                   WHEN grnt_year     = greatest_year
                   AND       fgl_period     = '00'
                   THEN 1
                     END
                ) OVER ()          AS cnt_00
     FROM    got_greatest_year
SELECT       SUM ( CASE
                    WHEN grnt_year     = greatest_year                    -- New
              AND       fgl_period     = :given_period                    -- New
              AND       cnt_00     > 0            THEN budget * 2     -- New
                    WHEN grnt_year     = greatest_year
              AND       fgl_period     = :given_period       THEN budget
                    WHEN grnt_year     = greatest_year
              AND       fgl_period     = '00'            THEN -budget
                    WHEN grnt_year     = greatest_year - 1
              AND       fgl_period     = '14'
              AND       cnt_00     = 0            THEN budget
                END
           )          AS total_budget
FROM       got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New".

Need help with Template - unbalanced #EndEditable tag

I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
If I open the file independently it looks great - otherwise I get the error.
Code for internal_students.dwt
There is an error at line 45, column 79 (absolute position 2188)
<div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
I need help with this as the site and templates were created 2/3 years before I arrived on the job.
Thank you
Cheryl

Okay
- This is on-line page http://caite.cs.umass.edu/students/index.html
If you want code from template here it is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />

<title>CAITE - Commonwealth Alliance for Information Technology Education</title>


<meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
<meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
<meta name="robots" content="all, index, follow" />
<meta name="revisit-after" content="14 days" />
<meta name="author" content="Outreach Web Team" />

<link rel="shortcut icon" href="/images/favicon.ico" />
<script type="text/javascript" src="../scripts/jquery.js"></script>
<script type="text/javascript" src="../scripts/jquery.easing.js"></script>
<script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
<script language="JavaScript" type="text/JavaScript">
    
</script>
<link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
</head>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<body>
    <div id="wrapper">
        <div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
                
            </div>
       </div>
        <div id="wrapper_l">
            <div id="wrapper_r">
                  <div id="innerwrapper">
                    <div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
                    <div id="internalBanner">
                      <div class="students-banner">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
                            <td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
                                <div id="internalQuote-inner">
                                  <p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
                              </div>
                            </div></td>
                          </tr>
                        </table>
                    </div>
                    </div> 
                    <div id="internalContent">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="317" align="left" valign="top" id="secondary-content">
                              
                              <h3><a href="../students/index.html">For Students</a></h3>
                              <div id="secondaryNav">
                                <ul>
                                  <li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
                                </ul>
</div>
                            </td>
                            <td align="left" valign="top" id="contentCell">
                              <h1>For Students</h1>
                              <p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
                              <p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
                              <p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
                              <p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
                              <p> </p>
                            </td>
                          </tr>
                      </table>
                    </div>
                    <div id="alliances">
                          <table width="100%" border="0" cellpadding="0" cellspacing="0">
                            <tr>
                              <td height="30" align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
                            </tr>
                            <tr>
                              <td align="center" valign="middle"><p>
<table border="0" cellpadding="2" cellspacing="0">
                                <tr>
                                  <td width="35" align="center" valign="middle"> </td>
                                  <td align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50" border="0 /"></a></td>
                                  <td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
                                  <td align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p>                                  </td>
                                  <td align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
</tr>
                              </table>
</td>
                            </tr>
                      </table>
                    </div>
                </div> 
            </div>
        </div>
        <div id="bottom">
            <div id="bottom_l">
                <div id="bottom_r"> </div>
            </div>
        </div> 
    </div>
    <div id="copyright">
<p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
© copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
<font color="#666666"><br>
</font>
<p><font color="#666666" size=2> This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
</div>

<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-7435501-1");
pageTracker._trackPageview();
} catch(err) {}</script>
    </body>
</html>

Need help with 3 column fixed in internet explorer

Similar Messages

Maybe you are looking for