Need help with 6300 configuration settings

I can't get sms, email or web to work on my lovely new 6300 phone (an xmas present from my daughter) :-(
I travel between England and France and have an Orange sim card for England and an SFR card and contract in France (Orange doesnt work in the mountains).
I managed to text when in England with the orange card. On arriving in France I found the phone was locked to Orange (first headache, given that I live in the country, over 50 miles from any Nokia dealer). I got the phone unlocked, but SMS etc were still not working and local mobile outlets hadnt a clue. So I'm on my own.
Rummaging around this site I realised I probably needed to additional settings, and downloaded these.
Now for the real nightmare: how the hell to set these configuration settings. I seem to be going round in circles. Is there anybody out there who could help me make some sense of the following settings???!!!
Although helpful, this site is not good at explaining the significance of the following (and whats more I feel they should probably be listed in the reverse order?)
- default config setting
- preferred access point
- personal config setting
DEFAULT CONFIG SETTING
I have a choice of
- orange (inherited with branded phone and presumably needed when back in the UK?)
- personal config
- SFR MMS (downloaded by me from Nokia)
- Wanadoo (downloaded by me from Nokia)
Ive chosen personal config (see below)
ACTIVATE DEFAULT IN ALL APPS
I have said no ??
PREFERRED ACCESS POINT
Ive created one called 'Fra access point' (see next) so as to have alternative to all the orange ones,
PERSONAL CONFIG SETTING
I've made three: FRA access point, FRA mailbox and Fra web
The access point has data bearer as Packet data (dont ask me what this means!) and I made up my own user name and password
Well, there you are. I would at least like to have the sms working (I suspect the email may be another hurdle as my pop and sms servers are different).
I do hope someone can help me

I was disappointed by the deafening silence which followed my cry for help - perhaps a bit too meaty for a Friday afternoon?
Anyhow, amazingly, after a loooong and expensive phone call to SFR (Vodaphone) the problem has been resolved (sort of).
I had been fiddling around with the configurations under Settings. It turned out there are MORE settings under Message settings and these included the need to specify a number for the Message Centre. (Nowhere on the SFR site is this number given, plus their link for downloading configurations is not working...)
Be warned, I might be back in a week or two when I have more energy to tackle email.

Similar Messages

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

NEED HELP WITH WORKFLOW CONFIGURATION

I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tell me what I need to do to get these requirements fulfilled.
1) Description:
This is a workflow requirement to serve as a reminder of upcoming investment
maturities.
Requirements Details:
Create a workflow to serve as a reminder of upcoming investment maturities.
Donor System Processing Narrative:
Read the maturity dates on investments.
Target System Processing Narrative:
Send a notice to the parties that an investment will be maturing soon.
2) Description:
Implement workflow to route invoice receipts using a one time vendor for management
review and posting
Desired Functionality:
If a one time vendor is entered by the AP Voucher Clerk the invoice will be automatically
parked by the program and a workflow notification triggered to the Accounting
Supervisor and Accounting Manager (backup). The Accounting Supervisor will review
the parked document and imaged copy of the actual invoice and post the parked
document.
3) Description:
An approval workflow is needed for credit memos posted to SAP customer accounts.
Desired Functionality:
The Cash Journal Clerk will post a credit memo to the customer account using transaction
FV75 Park Customer Invoice. This transaction will automatically trigger a workflow to
the Accounting Manager for approval and then to the CFO who will approve and post the
parked document. (In order for this transaction to automatically trigger what configuration needs to be done).

Bob;
You can borrow the example code that ships with both NI-DAQ (in case you are doing NI-DAQ function calls) and Labview. The best examples to start with are the ones that have the prefix STC.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Need help with AS8 configuration

Our present situation is like this:
AS7 with single domain and multiple server instances
instance A running on port xxx containing app1
instance B running on port yyy containing app2
instance C running on port zzz containing app3
Now, when I move to AS8.1 PE, I dont see the option to create a server instance inside a domain. I need to create 3 domains in order to accomplish the same task as above. Not only that, now I need to login to 3 different admin servers to manage the 3 apps on 3 ports
I need help with some options I can use
thanks

I'm not sure but i think that on 8.1 pe you can have only one server instance by default...
But you can olso try by command line tool asadminin [installdir soas]/binuse:
asadmin --help for a list of commands available.
In the list should be create-instance to create a stand alone instance.
Hi
Stefano

I need help with Compressor 4 settings to convert .mp4 files to .m4v for iBooks Author

I'm a curriculum design guy with no video background. I have Compressor 4, but don't really know much about how to best use it. I'd appreciate some help with getting the right setting for my project. Screen shots of settings would be much appreciated, since I don't know much video terminology.
I'm making an free iBook for students on WWII propaganda using old videos from the Internet archive.
I'd plan to use Compressor to:
1. Convert the .mp4 files to a .m4v that iBooks Author will accept. (I know I can use QT for that, but it increases file size)
2. Use Compressor to reduce file size so my iBook doesn't get too big
3. Get videos that look & sound the best, given the poor quality of the original source videos.
Here's some sample videos that I'll use:
http://www.archive.org/download/OutOfTheFryingPanIntoTheFiringLine/OutOfTheFryin gPanIntoTheFiringLine.mp
http://archive.org/download/AvengeDe1942/AvengeDe1942_edit.mp4
PS - I will also be editing some of the original videos in iMovie - if I use different settings to prep those videos for iBook Author, let me know.
Much thanks in advance for any help

Compressor is half the size compared to QtX encoding, 17 MBs...
File Format... H.264 for Apple Devices...
Device: iPhone Local/WiFi
Aspect Ratio: 4:3 480x368
Data Rate: 700
Uncheck Multi-pass

Need help with best render settings for project

Hi everyone,
I am completely new to after effects and premiere.
1. I am working on a premiere project with 1440 x 1080 mpeg2 footage from a Sony hdr-fx1000, in my premiere project my sequence settings are HDV 1080i30 (60i).
2. I export a clip with under these same settings.
3. I open a new composition in after effects with the following settings: preset: HDV 1080 29.97 (same as footage)
4. I time stretch using pixel motion
5. What are the best render settings and output module settings to use if I want to import the modified clip back into my premiere project?
PS I've been trying to output to mpeg2 but when i check the properties on the clip it says .mv2 and it looks choppy.
Thanks in advance!

BTW, if you're new to After Effects, I very strongly recommend that you work your way through the getting-started materials here:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

6300 need help with picture message settings

hello
i cant seem to find how to enter my picture message settings
could someone please explain just what to do
i have the following from my provider
Advanced Options- TCP/IP= Check the box for APN settings enabled APN: uk.lebara.mobi We do not enable authentication.

call your operator and ask them to send the settings over the air these normally come in via text and when you recieve the message you will be given the option to save or discard,so save the message and select as default
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Noob needs help with Media Encoder Settings

Hi All,
Please be gentle with me. I am very new to this.
I am using PPCS4 full version on which I am trying to edit and export video from my Canon HF 10 using their AVCHD format.
The Mac is a MAC PRO 2 x QuadCore 3.0Ghz, 1 x 320GB SATA and 3 x 1TB SATA disks with a 30" Apple Cinema Display.
I can import and see the video running in the source window, it can be a bit choppy but i am putting dowm to the lack of RAM (more the way). My real problem is that when I export the files the result is, well bad. I either get what appears to be a line effect every other line on the screen or by using other settings it appears grainy.
My Cam should be recording in 1080i HD and i expect to be able to put this stuff on a DVD / Blue-Ray disk or file and see as good an image as I see in the viewfinder. This I cannot seem to do.
Any ideas?
Thanks
J

Hi
I don't understand...please let me know...
did media encoder work before and it just suddenly stopped working ? Or is this the first time you tried using it and it just doesnt work from your original installation ? In other words , did it EVER work for you using the HD ?
What source material are you using ? In other words, what type of video. MOV and AVI can have many different types of video inside those file extensions...they are called "wrappers" insomuch as they can have a lot of different "codecs" being used in the video. Can you tell us what the video is that you're using when AME fails to work ?
Also tell more about your computer setup...how many hard drives? Did you set up your system like recommended in many threads here in the forums ?
There are a lot of really good and smart people here who can help you, but they need as much information as possible so they can begin to understand what is going on with your problem. It does take some time and work on your part to put all that info into a message, but it's worth it because most times problems are solved because of it.
ps...not meant to be a criticism because you were angry about problem, but some people probably didnt respond to your trouble right away because of your initial mssg being a little bit scary.. most people here are just users like you and help each other. nobody wants to risk being yelled at or deal with someone who is just angry and isn't really supplying enough information to help solve the problem. That's just my opinion, and I'm glad your response to my mssg was less angry sounding. Whew !

Need help with AAA configuration

I am trying to configure AAA on my network devices. I am using TACACS+ with an ACS (3.2) server. I have setup two user groups in the ACS server, one with enable priviledges and one without. I am able to get the AAA configuration to work when telnetting into the devices. However, when logging into the console port, the user group with enable priviledges do not go directly into enable mode as the telnetted users do. How to fix this?

Hi,
You will need to use the following command :-
aaa authorization console
This command will not show up on the help.
Regards,
Vivek

HT1491 need help with the payment settings

im having a problem with my ipod 5 it is not letting me download any apps it says i need a visa /credit card but i dont own one so what do i do

Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

Need help with error configuring Identity Management in OAS 10g

Hi,
I am configuring SSO in OAS 10g, After successful installation (with sso option selected) when I go to the management interface and attempt to configure Identity Management it fails with the following error:
Error configuring identity management. oracle.ias.configtool.config.ConfigException: Unable to retrieve SSO DB information.Base Exception: oracle.ias.configtool.config.ConfigException: oracle.ias.configtool.config.ConfigException: oracle.ias.configtool.config.ConfigException: Unable to retrieve SSO DB information . Base Exception : Error when reading seeAlso of replicaid entry - java.lang.NullPointerException Status code 3
I am totally stumped, cant find any instance of this error in docs etc. PLEASE HELP.
I am trying to setup OAS to SSO with MS AS for oracle ebusiness suite 11i.
Thanx in Advance,
Sean

Check that your insfrastructure database is up and running, it's accesible, as well, check for OID procs and demons that ports for OID are open and that you can make ldapbind this last may not be necesary as the error say about database, but is good to check also. Go to *$ORACLE_HOME/opmn/logs* and check the files there to see if other process are having problems.
Greetings

Need help with database configuration

Hi all,
I have an Oracle 9i release 2 Database running on Windows server 2000. There I intend to insert data using a consol application. The program runs fine from other machines connected to it through lan and data is inserted all right. But when I run the program on the same machine as the database server, it gives the following error message
"ORA-01843: not a valid month
ORA-06512: at "FASTDB.SPINSMODSALESCENTERSMESSAGES", line 16
ORA-06512: at line 1 .."
The program is written in C# and the server has .NET FrameWork 2.0 and MDAC 2.6 installed.
I don't understand if the program were wrong, then how does it run properly from other machines. And if it runs correctly on the other machines then why doesn't it run on the server machine..
The procedure looks like this
CREATE OR REPLACE PROCEDURE SPInsModSalesCentersMessages(pv_1MessageId integer,
     pv_2requestMsgs varchar2,
pv_3replyMsgs varchar2,
pv_4messageStatus integer,
     pv_5outStatus out integer,
     pv_6SerialNo varchar2,
     pv_7SaveDateTime varchar2)
AS
vn_IsMsgsId integer;
BEGIN
     pv_5outStatus:=-1;
     SELECT count(1) into vn_IsMsgsId
     FROM TBLDataTranc_Client
     WHERE TBLDataTranc_Client.messageId = pv_1MessageId;
     IF vn_IsMsgsId = 0 then
          INSERT INTO TBLDataTranc_Client(messageId,serialNo,saveDateTime,resquestMsgStr,replyMsgStr,messageStatus)
          VALUES(pv_1MessageId,pv_6SerialNo,to_date(pv_7SaveDateTime,'mm/dd/yyyy hh12:mi:ss AM'),pv_2requestMsgs,pv_3replyMsgs,pv_4messageStatus);
     ELSE
          UPDATE TBLDataTranc_Client
          SET      resquestMsgStr=pv_2requestMsgs,
          replyMsgStr=pv_3replyMsgs,
          messageStatus=pv_4messageStatus,
          serialNo=pv_6SerialNo,
          saveDateTime=to_date(pv_7SaveDateTime,'mm/dd/yyyy hh12:mi:ss AM')
          WHERE TBLDataTranc_Client.messageId = pv_1MessageId
          and TBLDataTranc_Client.messageStatus =1;
          pv_5outStatus:=1;
     END if;
end;
Please help me if you can.

Hi ...
You can use a StatsPack for guess the best distribution memory with your DB needs.
See metalink Note:228913.1
Regards

Need help with hybrid configuration

Hello,
This is the first time I am working with Lync Online. My task is to install Lync on premises and we either will keep it together, or we migrate to the local Lync.
The Lync online is running for about a year now, so I know that everything is configured correctly.
I installed and configured local Lync SE server, Lync Edge server and Reverse Proxy server. Everything is setup and configured. I added a user that I use for installation to that Lync and it can login. I configured federation with another company and federation
works.
I run the following PowerShell commands on local Lync server:
Set-CsAccessEdgeConfiguration -UseDnsSrvRouting -AllowOutsideUsers 1 -AllowFederatedUsers 1 -EnablePartnerDiscovery 1
Set-CsHostingProvider -Identity LyncOnline -EnabledSharedAddressSpace $true -HostsOCSUsers $true -VerificationLevel UseSourceVerification -AutodiscoverUrl
https://webdir.online.lync.com/Autodiscover/AutodiscoverService.svc/root
I thought that at this time I should be able to see status and communicate between my user that is on local Lync and everyone else in the company that is on Lync online. This does not happen. When I do search in my Lync client, it shows me all other people
but I cannot IM to them, I do not see their status and they are displayed with icon of the phone. If I check details of the user, it shows me correct phone numbers, title, email address, etc...
Can someone tell me what am I missing? Why it does not work?
Thank you. Eric.

Hi,
Did you integration Lync and Exchange? Please check if you disable your Lync client from creating an Outlook contact from your Lync contacts. If you disable it, please enable it and then try again.
Here is a similar case may help you:
http://social.technet.microsoft.com/Forums/lync/en-US/42ea568c-5cf8-49f7-8d02-3d444b03f9f6/federated-contacts-showing-up-as-only-phone-numbers?forum=ocsaddressbook
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Need help with the export settings on FCPX

I recently upgraded to Final Cut Pro X from Express and am loving all the new features and capabilities that come with it. I just helped a friend with filming and editing a play at his school. After I finished editing it, the final MOV file is about 11 GB. Pretty big. When I try to put that file into iDVD to try to burn a DVD, my Mac begins to heat up really fast and I'm worried that this might overheat the processor.
I've tried other means of compressing the file without losing quality, like Handbrake, but to no avail.

I assume, your Project is ~20min, correct?
You exported a Master File = proRes, FCPX' internal intermediate codec, not meant for 'distribution'.
Choose one of the 'Apple device' presets in the share dialogue, in the drop-down options, change device to 'computer' to create a 'universal' mp4.
concerning 'heat':
Don't use your laptop in bed while doing tasks with high computation.
The bottom of device is needed for cooling.
Any 'soft' surface prohibits that…
If Mac really gets too hot, it will automatically switch-off - no worries..........

Need Help with Clip/Sequence Settings

Okay so I have a video with three or four sequences and all the clips are from the same tape and camera. The only problem is that about 2 or 3 clips in one sequences have black bars on the top and bottom of them (letterboxed?), only when they are on that sequence. So, I could take these clips that are i letterboxed in sequence 2, put them in sequence 1, and they are normal, no longer letterboxed. Please help, I have no idea what to do, and have been trying to fix it for hours.

Okay I just fixed it by going to that clip in the browser and un-checking anamorphic, even though every other clip has it checked?
Maybe someone could clear this up?
Thanks

Need help with 6300 configuration settings

Similar Messages

Maybe you are looking for