Need help with a Java applet

newGame.setActionCommand("newgame:1");
newGame2.setActionCommand("newgame:2");
//other lines of code in a previous method, rest of code not shown
public void actionPerformed(ActionEvent evnt)
int i;
int j;
String sp = new String(":");
String[] cmd = evnt.getActionCommand().split(sp);
// rest of code not shown
// **When I get to that lastline, it tells me that the split() method could not be found in class String. If you would like to see the rest of my code in order to help me, I will post anything to figure out what this problem is.*//

"because(sic)" was supposed to be "became" ... anyway, in the API doco, when it says that something is "since 1.4", for example, it means from that point onward. So 1.5.x is good - but I wanted to warn you off v.1.3.x in case that was where you were running this.

Similar Messages

Need HELP with Stick Figure Applet

I need help with this java program for college....we need to make a applet which displays a stick figure or some type of person using appleviewer..please can someone help me......
email: [email protected]

import java.awt.*;
import java.applet.*;
public class StickMan extends Applet {
     public void init() {
     public void paint(Graphics g) {
          g.drawOval(....);
          g.drawLine(....);
          g.drawLine(....);
          g.drawLine(....);
          g.drawLine(....);

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param      name="bgcolor"      value="ffffff">
<param      name="bheight"      value="10">
<param      name="bwidth"      value="10">
<param      name="delay"      value="1000">
<param      name="fontname"      value="TimesRoman">
<param      name="fontsize"      value="14">
<param      name="link"      value="http://java.sun.com/events/jibe/index.html">
<param      name="number"      value="3">
<param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param      name="space"      value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

Can anyone help with the java applet issue

Hello everyone,
This is my first thread in this forum,
I need a little help with the form developer...
I have oracle 9i db , 9i form developer
I don't want to run the form i created as a java applet
HOW IS THAT DONE i.e NOT IN THE INTERNET EXPLORER?????????
***IF ITS POSSIBLE

Hello,
I don't want to run the form i created as a java applet
No chance, because the Web Forms client is an applet and cannot be anything else.
Francois

Needed help with updating java code

Hello all,
Let me begin by let you know I am not a programmer and I have tried to solve this by reading on the net. I am a network admin so I tech knowledge but no programming.
I have a webcam sending a Jpg to an FTP site and there I have used an applet called view.class to refresh once a second.
site:http://70.154.170.253/webcamold.html
My problems is now that it refreshes the same image over and over. It refreshes the cached image not the new image.
From reading I suspect that it has to do with the newer version of java (it used to work fine).
I have tried using JavaCam but same issue it just refreshes cached image. Also image flickers, the applet I am trying to fix was really smooth.
I have also tried to compile code that I found on this forum but I got error dealing with deprecated code.
Any help would be greatly appreciated!!!
Code:
import java.applet.Applet;
import java.awt.*;
import java.io.PrintStream;
public class View extends Applet
implements Runnable
public void init()
setBackground(Color.white);
String s = getParameter("refresh");
if(s == null)
update = 30;
else
try
update = Integer.parseInt(s);
catch(Exception _ex)
update = 30;
filename = getParameter("picture");
if(filename == null)
System.out.println("No filename given as parameter.");
md = new MediaTracker(this);
off = createImage(size().width, size().height);
refreshImage();
public void paint(Graphics g)
g.drawImage(off, 0, 0, this);
public void update(Graphics g)
paint(g);
public void refreshImage()
img = getImage(getDocumentBase(), filename);
md.addImage(img, 0);
try
md.waitForID(0);
catch(Exception exception)
exception.printStackTrace();
Graphics g = off.getGraphics();
g.drawImage(img, 0, 0, this);
img.flush();
public void run()
while(th != null)
try
refreshImage();
repaint();
Thread.sleep(update * 1000);
catch(Exception exception)
System.out.println("Error when thread was supposed to sleep: " + exception.getMessage());
public void start()
if(th == null)
th = new Thread(this);
try
th.start();
return;
catch(Exception exception)
System.out.println("Couldn't start thread: " + exception.getMessage());
return;
} else
return;
public void stop()
if(th != null)
th.stop();
th = null;
public void destroy()
stop();
public View()
update = 30;
Thread th;
String filename;
int update;
Image img;
Image off;
MediaTracker md;

This is compile error free code and regarding your issues i don't think am good at this stuff
import java.applet.Applet;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Image;
import java.awt.MediaTracker;
public class View extends Applet implements Runnable {
     Thread th;
     String filename;
     int update;
     Image img;
     Image off;
     MediaTracker md;
     public void init() {
          setBackground(Color.white);
          String s = getParameter("refresh");
          if (s == null) {
               update = 30;
          } else {
               try {
                    update = Integer.parseInt(s);
               } catch (Exception _ex) {
                    update = 30;
          filename = getParameter("picture");
          if (filename == null) {
               System.out.println("No filename given as parameter.");
          md = new MediaTracker(this);
          off = createImage(size().width, size().height);
          refreshImage();
     public void paint(Graphics g) {
          g.drawImage(off, 0, 0, this);
     public void update(Graphics g) {
          paint(g);
     public void refreshImage() {
          img = getImage(getDocumentBase(), filename);
          md.addImage(img, 0);
          try {
               md.waitForID(0);
          } catch (Exception exception) {
               exception.printStackTrace();
          Graphics g = off.getGraphics();
          g.drawImage(img, 0, 0, this);
          img.flush();
     public void run() {
          while (th != null) {
               try {
                    refreshImage();
                    repaint();
                    Thread.sleep(update * 1000);
               } catch (Exception exception) {
                    System.out.println("Error when thread was supposed to sleep: "
                              + exception.getMessage());
     public void start() {
          if (th == null) {
               th = new Thread(this);
               try {
                    th.start();
                    return;
               } catch (Exception exception) {
                    System.out.println("Couldn't start thread: "
                              + exception.getMessage());
               return;
          } else {
               return;
     public void stop() {
          if (th != null) {
               th.stop();
               th = null;
     public void destroy() {
          stop();
     public View() {
          update = 30;
}

Need help with classes in Applets and drawing buildings.

I'm trying to create an Applet that draws a starfield (I got that right) and then searches for any parameters in the Applet tag. The Applet then draws as many buldings as there are parameters in the Applet tag, and uses the number in the parameter as the height. I have it working OK, but it won't draw the buildings. Here is me code:
import java.applet.Applet;
import java.awt.*;
import java.awt.geom.*;
import java.util.*;
import javax.swing.*;
public class Skyline extends Applet {
public void init() {
setBackground(Color.black);
public void paint(Graphics g) {
Graphics2D pen = (Graphics2D) g;
Random generator = new Random();
Stars starField = new Stars();
starField.drawStars(pen, getWidth(), getHeight());
int n = 1;
String param = null;
while((param = getParameter("param" + n)) != null) {
n++;
int startX = 0;
int startY = getHeight();
int height = 0;
int width = getWidth() / (n + 2);
Building structure = new Building();
structure.drawBuilding(pen, height, width, startX, startY, n);
class Stars {
public void drawStars(Graphics2D pen, int Width, int Height) {
Random generator = new Random();
int runs = 1;
while (runs <= 1000) {
int Xcord = generator.nextInt(Width - 3);
int Ycord = generator.nextInt(Height - 3);
Ellipse2D.Double star
= new Ellipse2D.Double(Xcord, Ycord, 3, 3);
pen.setColor(Color.white);
pen.fill(star);
runs++;
class Building {
public void drawBuilding(Graphics2D pen, int height, int width, int startX, int startY, int n) {
Random generator = new Random();
int n2 = 1;
int runs = 1;
String input = "";
int red = generator.nextInt(100),
green = generator.nextInt(100),
blue = generator.nextInt(100);
pen.setColor(new Color(red, green, blue));
while (runs <= n) {
input = getParameter("building" + n2);
height = Integer.parseInt(input);
height = startY - height;
Rectangle building = new Rectangle(startX, startY, height, width);
pen.fill(building);
startY = startY + width;
n2++;
runs++;
Can anyone help me?

That didn't work, so I looked at the code again and found some errors. I decided to rewrite it, here is the updated code...
import java.applet.Applet;
import java.awt.*;
import java.awt.geom.*;
import java.util.*;
import javax.swing.*;
public class Skyline extends Applet {
public void init() {
setBackground(Color.black);
public void paint(Graphics g) {
Graphics2D pen = (Graphics2D) g;
Random generator = new Random();
Stars starField = new Stars();
starField.drawStars(pen, getWidth(), getHeight());
Building structure = new Building();
structure.drawBuilding(pen);
class Stars {
public void drawStars(Graphics2D pen, int Width, int Height) {
Random generator = new Random();
int runs = 1;
while (runs <= 1000) {
int Xcord = generator.nextInt(Width - 3);
int Ycord = generator.nextInt(Height - 3);
Ellipse2D.Double star
= new Ellipse2D.Double(Xcord, Ycord, 3, 3);
pen.setColor(Color.white);
pen.fill(star);
runs++;
class Building {
public void drawBuilding(Graphics2D pen) {
Random generator = new Random();
int n = 1;
int n2 = 1;
int runs = 1;
String input = "";
String param = "";
while ((param = getParameter("building" + n)) != null) {
n++;
int height = getHeight();
int width = getWidth();
int startX = 0;
int startY = height;
int red = generator.nextInt(100),
green = generator.nextInt(100),
blue = generator.nextInt(100);
pen.setColor(new Color(red, green, blue));
while (runs <= n) {
height = getHeight();
input = getParameter("building" + n2);
height = Integer.parseInt(input);
height = startY - height;
Rectangle building = new Rectangle(startY, startX, height, width);
pen.fill(building);
startX = startX + width;
n2++;
runs++;
I can get it to draw one large black building, but that's it.

Need help with buttons in applet

stupid question maybe but i'm a beginner, and hey..there are no stupid questions, right? well, i may prove that wrong...anyway...
I can't relocate a button, or any other component for that matter. When I try to make a simple applet with just one button showing, then it works perfect...but when I make the applet a little bigger with some graphcis and text, the setLocation() and setSize() methods don't work. the wierd part is that I don't get an error message, the compiler just ignores those lines...so it seems anyway.
If anyone can help me I'd be very greatful
thanx a lot

Do you know there are 5 layout managers in java. It is probably worth looking through each one and the commands they use.
The layout is determined by two things:
1.position Components are added
2.Layout manager used
Ive never had to use setLocation() and setSize() as the layouts do it for you:
1.Flowlayout: which is the default pane. e.g.
setLayout(new Flowlayout()).
2.GridLayout: postions panels into rows and columns
b.GridBagLayout
3.Borderlayout(NORTH,SOUTH,EAST,WEST and CENTER) postions in applet.
4.CardLayout(a bit like a slideshow)
5.Insets() which is used to determine top,bottom,left and right.
Don't bother about 4 or 5 yet. But definitly have a look at the other 3.
e.g. setLayout(new BorderLayout());
add("North", new Button("ok"));
add("CENTER", new Button("Exit");
etc..

Need Help with a JAVA programming assignment

How do I write a JAVA program that could be used as the start of an MS-DOS/Windows simulation of the IEEE 802.3 protocol? I am to only code the parts necessary to build the 802.3 frame. For the initial implementation, the Checksum function need not be a CRC function, and the Destination and Source addresses wil be in input, stored, and output, and in dotted-decimal format.
I need:
1. A record to describe the frame, with each field being a (byte-) string of the required size, except that the Data field is of variable size. Although the "Source address" and "Destination address" would be 6 bytes for a real implementation, for this first implementation you can either assume they'll be text strings in the usual "dotted decimal" form (e.g. "14.04.05.18.01.25" as a typical example--from Tanenbaum, p. 429), or 6 hex digits.
2. Suitable constant declarations for values such as the standard "Preamble" and "Start of Frame" values.
3. Suitable functions to Get the three variable values "Destination address", "Source address", and "Data" from the standard input device.
4. A suitable function to display each of the fields of a given frame in a format such as:
Preamble: ...
StartofFrame: ...
Destination: ...
etc.
5. A suitable function to generate a "Pad" field if necessary.
6. A "dummy" Checksum-generating function which just takes the first 32 bits (4 bytes) of the Data (or Data+Pad, if necessary) rather than an actual CRC algorithm.
I have no experience with Java. Can you help me or start me in the right direction?
Thanks...........TK

If you have no experience with Java, then it seems to me your first step should be to start learning the language. But it's difficult to advise how, since we don't know anything about your background. There are many good books available on Java, some are for beginners and some are for advanced programmers, so I'd suggest you go somewhere that has a large selection and start looking for something that doesn't seem completely over your head.

I need help with a java assignment

I am being taught java but dont really understand what i have to do. If you send me an email to [email protected] ill send you a copy and so help me with the assignement.
I am currently working on free web page so you can download the assignment.
Thank You All

hey, there's something wrong with my internet, i clicked on your email adress and nothing happened :(
too bad. maybe i can't do your assignment.
go see somee tutorials, maybe these will help you, also try to understand how API will elp you (to both you may find links from left column of this page) and also, see if there area some samples of how to do what you need to be done.
http://www.javaalmanac.com -- my favorited place for code samples.
also whan you have some saaignment or other task, then see if google finds you apropriate solution. and there's a search function in these forums as well.
i hope you get your homework doen in time...

Need help with error java.lang.IllegalArgumentException: timestamp on bar b

My company uses Java based applications for real time streaming stock market information and I have come across 2 users that are generating the same error:
Bar.addBar failed adding com.abwg.bar.BasicBar 20071210-08:27:00.000 104.34 104.35 104.25 104.25 950 to com.abwg.bar.BasicBar 20071210-09:30:00.000 104.11 104.38 104.11 104.38 436 :java.lang.IllegalArgumentException: timestamp on bar being combined older than original bar
I have had no luck trying to determine what the cause of this error is, however both users experience very laggy performance shortly after launching the application. I have not been able to duplicate the problem, and the developers have not been able to provide any response or possible causes yet.
I'd be very appreciative if anyone could help me make some sense of what this error type might mean. It's got something to do with the computer that the application is being run on. One user is on a Mac 10.3 using J2SE 1.4.2_12 and the other is on Win XP using Java 1.6_3

Thank you Frank and Carole for your response. The stated issue/error is resolved. It had to do with the upgrade somehow which lead to multiple certs for the same agent. Anyway, I had to delete ADS and all attached Agents, re-create ADS, re-create all Agents and re-register with the new ADS. I then manually re-registered the Directory Server instances on both the Primary and Secondary Servers with the new ADS. Voila, the DSCC Web console no longer prompts for server credentials.
But importing the Wild card cert issue still remains. I added the issuing CA chain to the ldap instance CA store and I see the certs listed. But when I try to import the P12 cert/key combo, I get an error which says something like: "The certificate is already in the database". But it is not, verified using certutil.
Yes internal CA or Self-signed Certs are fine. If I add the internal CA and Root CA to the cert store on my LDAP clients, then I am fine. No SSL errors. But want to avoid using such as we do have quite a few clients which would be connecting to the store. Hence want to use our enterprise wild card Cert. I am not sure if it is an issue importing a wild card pkcs12 format.
As mentioned above I did add the CA chain (which issued the wild card) to the actual instance, not the ADS. I can try that. But are you sure we need to add the Root CA to Tomcat ks.
And while we are at it, the Self-signed certs generated using the Console is only valid for 2 years. Is it possible to change the term ?
Thanks again.

Help me please need help on my java applet

hi there i have started a final year project on java.
it is a simple drawing applet however i need to be able to
save my drawings to a local hard disk. i have tried going through the tutorial but i dnt get it. please can any1 out there help me. my email address is [email protected] if you give me your email address i will mail you my program and maybe you could help me
Aj

If you want an applet to write to user's local hard drive, there are many securiy issues that need to be resolved. How to resolve these issues depend on whether the applet uses a plugin (swing) or the browser's native JVM (no plugin, uses AWT only). In any event, the applet will probably need to be signed and the user's browser must be correctly configured. The following link gives you some detail on how to sign an applet that doesn't use swing:
http://home.attbi.com/~aokabc/FileIO/FileIOdemo.htm
The instructions on the first two links should point you to the right direction...
V.V.

Need help with basic Java programming

I'm having a little bit of trouble with my code. For the sake of argument, I've removed the code I'm having trouble with, because I know it was inaccurate. I'm trying to create a loop so that this program will keep going through and through until the user enters an invalid variable. I thought the default after the case statements was supposed to make the system exit and output my message. Those two problems, the loop and the default, are what I'm really having problems with. My code is posted below.
import javax.swing.JOptionPane;
import java.util.Locale;
import java.text.NumberFormat;
public class Retail
public static void main(String args[])
String firstNum;
String secondNum;
String result;
int prodNum; //first number to input
double quantity; //second number to input
double total = 0.0; //total of Prod * Quantity Sold for all items
// To use American Dollar
NumberFormat moneyFormat = NumberFormat.getCurrencyInstance( Locale.US );
// first number entered as string
firstNum = JOptionPane.showInputDialog( "Enter product number 1-5" );
// second number entered as string
secondNum = JOptionPane.showInputDialog( " Enter quantity of items sold" );
// convert values to type double or int from type string
prodNum = Integer.parseInt( firstNum );
quantity = Double.parseDouble( secondNum);
result="";
if ( prodNum >=1 && prodNum <=5 ) {
switch (prodNum)
case 1: // 1st product
total = 2.98 * quantity;
break;
case 2: // 2nd product
total = 4.50 * quantity;
break;
case 3: // 3rd product
total = 9.98 * quantity;
break;
case 4: //4th product
total = 4.49 * quantity;
break;
case 5:
total = 6.87 * quantity;
break;
default: JOptionPane.showMessageDialog( null, "Wrong product number entered" );
JOptionPane.showMessageDialog( null, moneyFormat.format(total), "Total Price of Items Purchased", JOptionPane.INFORMATION_MESSAGE );
System.exit(0);
***I know I need to put something in the user input message to state that any value other than 1-5 entered will cause the program to skip to the output, I'll put that in later.***

When you post code, please use [code] and [/code] tags as described in Formatting Help on the message entry page. It makes it much easier to read and prevents accidental markup from array indices like [i].

Need Help With NetBeans (Java Studio Enterprise 8)'s code generation

Hi!
I am using Java Studio Enterprise 8 with NetBeans 4.1 IDE bundled together with it. When trying to create GUI out from NetBeans Form Designer, I don't like the way it generates the code. When I try to use a JTextField, it uses "Fully Qualifed Class Names" (e.g: javax.swing.JTextField) on the code. How do I set NetBeans not to use it but rather use only the class name and generate import lines on top of the code? Also, how do I set it up that it will generate the variable declarations (which is on the uneditable blue portion of the code) on top rather than the default which is placed at the bottom of the class code body. I have tried tweaking the Options menu of this IDE but haven't got any luck...
Hope you could help, and thanks in advance!

To address the location of the var decl codegen section (or any codegen location issues), there is a workaround, admittedly, it is a bit tedious.
Once the form code is generated, as Kris mentioned, open the class in an external editor so that you can edit the generated code.
Then cut the entire var declaration section along with the begin/end gen-code markers and paste it to the section of the file you desire.
When you add more components to your form, the codegen will find this section wherever it is and add to it.
Alternatively, you could just move the non-protected code around the protected within the NB editor, but you would not be able to rearrange the order of the actual code-genned sections.
craig

Need help with a java chat software!!! Anyone pls give ideas

I need to implement a chat protocol with sockets for my course!!
As of now i have only got to the simple client server application with sockets and have a user interface with panels.
How could I proceed...
How should i use login names and passwords??
Should i use if else loops to specify :
various headers like
login
pass
send
exit
if you could point out som esite that will be helpful or even a book it would be of great help!!

Don't use if/else loops, they have this nasty habit of not existing.
My quarter-pence:
For passwords, use a map which maps name/hashed password. That way, you'll never actually store the password.

Need Help with a Java programming exercise.

I have to Write a program that reads two times in military format (0900, 1730) and prints the number of hours and minutes between two times. Supply your own test program. Here are two sample runs. User inputs are the numbers.
Please enter the first time: 0900
Please enter the second time: 1730
8 hours 30 minutes
Please enter the first time: 1730
Please enter the second time: 0900
15 hours 30 minutes
Test Program I can write up myself. But the entire constructor I have no idea how to start. This is basic Java Coding. no C++ no importing anything.
So far this is what I got and I'm sure it's wrong:
public class TimeInterval
private double hours;
private double minutes;
public TimeInterval(double Time1, double Time2)
hours =
minutes =
}

tad2382 wrote:
Jverd,
I'm guessing that in your early days on this forum you must have spent a lot of time explaining constructors, object creation, etc. Now, after some 40K posts to the forum, you figure newbies should just go and read the documentation. Is that what a lot of veteran posters feel?Perhaps the OP is not aware of the fact the Sun has a good deal of high quality study material published on their website. What's wrong with posting it in a thread? Why should one copy the same thing over and over again? If after reading that tutorial, the OP still has some questions about it, s/he is free to post a follow up question. I am sure that many of the regulars here are more than happy to answer them.
Also note that the OP's problem description is rather vague. A "I don't know where to start" is IMO best answered by a link to a comprehensive tutorial or a beginners book.
Being one of the (relatively) novice posters on the forum, I still feel the need to customize posts,Well, by all means: do so.
trying to see things from the poster's side. Maybe after a few thousand posts, I'll just keep throwing the same documentation at newbies, instead of detailed customized responses, heh.IMO, that's a load of cr@p.

Need help with a Java applet

Similar Messages

Maybe you are looking for