Need help with a mirror image effect

For most of our product photos, I create a copy of the image, flip it vertically, fade it out, and then move it down to create a mirror image effect. Simple enough. But this one I'm having a problem. The product has 4 legs, and from this view, the back 2 legs are shorter. When I do my normal steps that I listed, I get similar to what you see below. I know all about drawing a marquee around part of the reflection, hitting Ctrl+T and then holding down Ctrl+Shift to skew just what's in the marquee. I've done this technique a lot, but it does not work for this particular image. What do I have to do to get the reflection of the back legs to line up with the actual back legs in the image? Thanks.

Well, Photoshop is not a 3D rendering program and you can only fake it by painting or assembling the reflection using your artistic skills and knowledge of perspective and reflections. From certain angles and with certain objects this could be quite easily done by just mirroring the 2D image but in other cases like this it wont' work. I made a quick scene in a 3D program to show you how the refection will actually be in real life - you will see the bottom of the table in the reflection and this is missing from the 2D image. You can assemble and position separately parts of the reflection from the 2D image by using the front sides of the table and and legs but the rest (bottom) of table has to be created from scratch.

Similar Messages

Need Help With Waveform-driven Image Effects

Hi,
I've been working on a full-dome 3D animation for a couple of years now and I'm looking for someone to help with a custom plug-in for After Effects, Photoshop and/or Combustion. I need to be able to drive filters and effects like Brush Strokes and 'sketchy' noise with the waveform from an audio file. I've been using a very poor mans workflow in which I've mapped the waveform by breaking it up into vertical ranges of varying intensities and then applying respective levels of the effects and filters to the sequential images based on where they fall in the waveform ranges. So for the test Ive done, I've been literally applying Photoshop actions to very small packets of still images from rendered sequences, and it has been dizzyingly time-consuming. Ideally I would want to be able to do this dynamically with a motion graphics package, but really I'm looking for as much help as I can get.
This project began as my master's thesis and I'm working on it during the free time I have between teaching and freelance work; I don't have much money but I am willing to pay for help with this goal. There is still a lot of 3D work that I still need to do and the rendering process will be slow, so this wouldn't be a job with strict or tight deadlines. The final images will be very large (3200x3200) and with the growth in the full-dome market, these sizes could easily increase. If anyone is interested or could help me with this endeavor in any way, please respond to [email protected] Thank in advance to anyone who reads this.
Max

See the SDK_Backwards sample to see how to acquire audio data from a layer. This is the same access method used by AE's own waveform drawing plug-ins. Feel free to contact me directly with any questions.

DW8 - Need help with Flash Mirror Gallery by Flashdevelopment24

I just purchased an image viewer called Flash Mirror Gallery by Flashdevelopment24:
http://www.flashdevelopment24.com/extensions/flash_photo_gallery_06.aspx
I use DW8. Unfortunately the wizard and the instructions are WAY beyond me. I can insert the object on my page but I have no clue how to import images into it, do I need to create separate thumbnails?, etc. Its a European company and the English isn't taht great either which doesn't help.I went through all their FAQs and examples and I don't have a clue.
I'm doing something very simple, all I need are VERY simple directions on how to make this work. It would be best if there was a YouTube or other video tutorial available. I paid 45 buck for this and it useless to me right now. Help!

I paid 45 buck for this and it useless to me right now. Help!
Sorry can't help, don't know the product at all.
If you are having problems with it, then it's best to contact the people you purchased it from no? They should either help you with support issues, you you should get a refund if it doesn't work as expected.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Need Help with Complex Background Images

Hey, Macromedia, I mean, Adobe Dreamweaver users. I have a
dilemma, before you read further, look at this website:
https://statons.rtotogo.com/rtotogostore/rto_store/sign_in.asp.
Notice the background images. The light tan stripe at the top, the
orange/yellow stripe beneath it, and the darker tan color that
encompasses the rest of the background. When you go to a longer
page on the site, the top two colors do not repeat, and as the page
shrinks on smaller pages, so does the darker tan background. How
can I do this? I've seen it done before, and I read the source
code, but I am confused as to how I can accomplish this..... Please
advise! I am in desperate need of your expertise!
Thanks in advance for the help.
Chuck

It's controlled using CSS check out the css script and the
backgounds are
set to repeat along the x axis only
cheers
Ian
[email protected]
http://www.edwards-micros.co.uk
"ChuckRWD" <[email protected]> wrote in
message
news:e93ha7$lmi$[email protected]..
> Hey, Macromedia, I mean, Adobe Dreamweaver users. I have
a dilemma,
> before you
> read further, look at this website:
>
https://statons.rtotogo.com/rtotogostore/rto_store/sign_in.asp.
Notice
> the
> background images. The light tan stripe at the top, the
orange/yellow
> stripe
> beneath it, and the darker tan color that encompasses
the rest of the
> background. When you go to a longer page on the site,
the top two colors
> do
> not repeat, and as the page shrinks on smaller pages, so
does the darker
> tan
> background. How can I do this? I've seen it done before,
and I read the
> source code, but I am confused as to how I can
accomplish this.....
> Please
> advise! I am in desperate need of your expertise!
>
> Thanks in advance for the help.
> Chuck
>

Need help with a typewriter text effect

Hi, could you guys look over my script and see what's up? I'd like the words in the string to type out in the alotted time, but for some reason my function apends the first and last letter of anything in the string, so "Hello?" becomes "ello." This is not affected if I pad the text in the string with spaces, i.e. " Hello? " Nor does this work if I start count i at -1, not 0. Please help.
import flash.utils.Timer;
import flash.events.TimerEvent;
var str:String = "Hello?";
var i:int = -1;
var delay:int = 720%str.length;
var timer:Timer = new Timer(delay);
timer.start();
timer.addEventListener(TimerEvent.TIMER,gotime);
function gotime(e:TimerEvent)
textbox_txt.appendText(str.charAt(i));
i++;
if (i>=str.length)
timer.stop();

AHA! If forgot to go into the properties of my textfield and tell the ebedded font to have a character range of "All."
Thanks for getting my brain going Ned!
-Ab Infinito

Need help with flying saucer special effect

Hi--I want to create an effect in iMovie 9 of a flying saucer flying through the sky and then landing in a large open field, much like the scene in the 1951 version of "The Day the Earth Stood Still."
Does anyone have ideas or tips how to do this? Thanks.

2y ago (OMG! it's three years ago!!), I made a StarWars fanproject with my lil son (the old beta version of the website still alive here) ...
all the droids and spaceships were created in some very cheap animation app, which allowed a socalled alpha-chanel - the background was 'transparent') - in FinalCutExpress you add a 2nd layer - compositing done.
in iM08 you could follow my advice for overlaying stills http://karsten.schluter.googlepages.com/im08_logobug
in iM09, you can 'abuse' the greenscreen effect for compositing... film UFO model moving before a green background and take a foto of your background scenery.
or, build a model of your UFO and use fishing line for 'animation' while recording scenery - the line will be invisible...-

Need Help With This Warning: after effects warning: unable to create font

I have tried everything on evry site and forum, nothing seems to work. I installed the font verdana.ttf on my system and still I get this error. I used the Adobe clean up tool for CS5 and still received this error. I did a complete re-install and still received this error. Can someone with some real knowledge help me with this, PLEASE! BTW, I'm running CS5 on a Macbook Pro v. 10.6.8 Snow Leopard.
Thank you
Mike The Dude With A Serious Problem

Here's the contact information for Adobe Technical Support:
http://www.adobe.com/support/contact
Before contacting them, you might want to try these methods for clearing a corrupt font database:
http://kb2.adobe.com/cps/900/cpsid_90025.html
Going through the first two solutions on that page can clear up a lot of font issues.

Need help with picture-in-picture effect!!! URGENT

I've been trying to find out a way to use a picture-in-picture effect in adobe premiere pro cs3 but it just hasn't been possible.
I know that adobe premiere elements 3.0 has that option, but I can't seem to find it in pro cs3.
Can someone give me a hand? I'd really appreciate it!

See if
Wrigley Video Tutorials
has a lesson
Also the Wiki
http://ppro.wikia.com/wiki/Tutorials_and_articles

Need help with Elements and image size on my web site.

I have edited my photos in elements and loaded them on my website but when I click on them on the site to enlarge, some get really really big and others are fine. I don't know what Im doing wrong.
Any suggestions

Go to File>save for web. This brings up a dialog. Enter 800px or so for the longest side, check "constrain proportions" , and for your purpose you will no doubt want to save as JPEG - look under presets. I usually select high quality.

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

Need help with effect!

I need help with the following:
I am currently making a Harry Potter short film and I'm doing a spell that hits my friend and my friend needs to be blown backwards (if you know what I mean, he needs to like kinda fly backwards because of the force from the spell).
Can you in anyway help me with this or give me an idea on how to proceed?
I've been thinking of setting a green screen up where the person jumps backwards on a mattress or similar.
Thank you so much, I really hope you can help me.
I have been searching the web for a long long time and didn't find any answer.
Contact:
Reply here
Skype: asgerrockz

Be careful here. Someone yanking on another person rigged with a professional harness can suffer permanent spinal injury. I have a home and a family and I wouldn't attempt even a simple version of this kind of stunt without a rider on my liability policy, a professional and therefore bondable stunt coordinator, and a trained stunt person. No offence Todd but I'd never yank someone backward by a wire or cord attached to their torso.
You can do this very gently by having the actor just throw out their arms and jump backwards a bit then do the majority of the move in AE. Having the camera on a simple slider would also help. As the actor jumps back dolly the camera back on a slider.
I've been shooting and producing films for more than 40 years when not one injury on the set except for me. Fractured my L2 and L3 vertebrae on a fall with a SetadyCam in 1975 because we didn't do a thorough enough safety briefing. Don't just try and do something you think you have seen on YouTube without some serious planning. There's no need for anyone to get hurt on a set.

I need Help with a website I've created

I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>The Lighthouse Church</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv12 {
    position:absolute;
    width:295px;
    height:23px;
    z-index:4;
    left: 198px;
    top: 1px;
#apDiv13 {
    position:absolute;
    width:135px;
    height:22px;
    z-index:5;
    left: 1001px;
    top: 3px;
#apDiv14 {
    position:absolute;
    width:309px;
    height:992px;
    z-index:1;
    left: 33px;
    top: 479px;
#apDiv15 {
    position:absolute;
    width:327px;
    height:999px;
    z-index:1;
    left: 324px;
#apDiv16 {
    position:absolute;
    width:262px;
    height:1000px;
    z-index:2;
    left: 674px;
    top: 477px;
#apDiv17 {
    position:absolute;
    width:85px;
    height:34px;
    z-index:1;
    left: -379px;
    top: 1001px;
#apDiv18 {
    position:absolute;
    width:200px;
    height:115px;
    z-index:6;
#apDiv19 {
    position:absolute;
    width:168px;
    height:31px;
    z-index:3;
    left: 448px;
    top: 1451px;
#apDiv20 {
    position:absolute;
    width:94px;
    height:33px;
    z-index:3;
    left: 384px;
    top: 1477px;
body {
    background-color: #000;
    margin-left: 0px;
    margin-right: 0px;
#apDiv21 {
    position:absolute;
    width:920px;
    height:200px;
    z-index:4;
    left: 19px;
    top: 233px;
</style>
</head>
<body>
<div class="container">
<div class="content">
    <div id="apDiv5">
      <div id="apDiv16">
        <div id="apDiv17">
          <map name="Map2" id="Map2">
            <area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
          </map>
          <img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
          <map name="Map" id="Map">
            <area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
          </map>
        </div>
      </div>
      <div id="apDiv21">
        <blockquote>
          <blockquote>
            <blockquote>
              <blockquote>
                <blockquote>
                  <blockquote>
                    <p><img src="faithexplosion.png" width="314" height="225" /></p>
                  </blockquote>
                </blockquote>
              </blockquote>
            </blockquote>
          </blockquote>
        </blockquote>
      </div>
      <div id="apDiv14">
        <div id="apDiv15">
          <div>
            <div>
              <p> Special Message from Perry Stone </p>
              <h2> Was Jesus Born on December 25?</h2>
              <p> 12/20/2010 </p>
              <p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
              <p>Last   year, in response to the growing number of Christians who celebrate   Hanukkah but hate Christmas, I wrote an article for this website titled   “Hanukkah or Christmas?” I explained why I think Jesus was either   conceived or birthed on December 25.</p>
            </div>
          </div>
          <div>
            <div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
              <p> Prophecy Update </p>
              <h2> What Happened to Global Warming?</h2>
              <p> 12/17/2010 </p>
              <p> </p>
            </div>
          </div>
          <div>
            <div></div>
          </div>
          <div>
            <div></div>
          </div>
        </div>
        <div>
          <p><font size="2">Special Word</font></p>
          <p><font size="2">January 7th, 2011</font></p>
          <p> <font size="2">Dear Viewers:</font></p>
          <p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious            times in church history. Many things are coming upon the world and also upon the church and we (the church) must be totally            prepared to take up our cross daily and venture out into the lost and</font></p>
          <p> <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
        </div>
        <p> </p>
        <div></div>
        <div>
        </div>
        <div></div>
        <p> </p>
      </div>
      <img src="lighthousegraphic2.jpg" width="960" height="1509" />
      <div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
        <map name="Map3" id="Map3">
        <area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
      </map>
</div>
    </div>
<p> </p>
</div>
</div>
<div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
<div id="apDiv11">
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="#">Home</a>    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
      <ul>
        <li><a href="#">Fresh Word</a></li>
        <li><a href="#">Itinerary</a></li>
        <li><a href="#">Prophetic Word</a></li>
        <li><a href="#">Sermons</a></li>
        <li><a href="#">Special Words</a></li>
        <li><a href="#">Word of Month</a></li>
      </ul>
    </li>
    <li><a href="#">Men Ministry</a></li>
    <li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
      <ul>
        <li><a href="#">Chris Gore</a></li>
</ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
      <ul>
        <li><a href="#">Contact Us</a></li>
        <li><a href="#">Donate</a></li>
        <li><a href="#">Events</a></li>
        <li><a href="#">Our Store</a></li>
        <li><a href="#">Prayer Request</a></li>
        <li><a href="#">Salvation</a></li>
        <li><a href="#">Subscribe</a></li>
        <li><a href="#">Vision</a></li>
        <li><a href="#">We Believe</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Resources</a>
      <ul>
        <li><a href="#">Prepare for Disaster</a></li>
        <li><a href="#">How to Fast</a></li>
        <li><a href="#">Heaven & Hell</a></li>
        <li><a href="#">Warfare Prayers</a></li>
        <li><a href="#">Wisdom Words</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
      <ul>
        <li><a href="#">Article Archive</a></li>
        <li><a href="#">Audio Prophecies</a></li>
        <li><a href="#">Color for Year</a></li>
        <li><a href="#">Major Articles</a></li>
        <li><a href="#">Prophecy Archive</a></li>
        <li><a href="#">Prophetic Articles</a></li>
        <li><a href="#">Word for Year</a></li>
      </ul>
    </li>
</ul>
</div>
<div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
<div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

I need to print a mirror image of a PDF on my iPad. Is this possible?

I need to print a mirror image of a PDF on my iPad for an iron on transfer. Is this possible? I have Pages and GoodReader but can't figure out how this would work on either app. Help!

Can't be done as an exact copy from one Mac to the other. The operating systems are system specific. First make sure your system doesn't need a firmware update to get 10.2 or later on it. You'll need to install 9 on it if it does, direct from a 9 retail CD that is compatible with it *. This disc can't say Upgrade, Dropin, or OEM. To determine compatibility, identify your G4 tower:
http://support.apple.com/kb/HT3082
http://docs.info.apple.com/article.html?artnum=42739
Then look at the OS 9 compatibility:
http://docs.info.apple.com/article.html?artnum=25517
Then apply the correct update
http://docs.info.apple.com/article.html?artnum=86117
The last Mac OS 9 to come retail is 9.2.1, and that's newer than 9.0.4, 9.0.2, and 9.1.
Your ghost image can be done using cloning software, but then you'll have to use a retail 10.3 installer and 10.3.9 combo update on the G4 tower. Then use the Migration Assistant to import the data from the clone of the iBook. The 10.3 retail disc looks like * and does not say upgrade, dropin, or OEM. The 10.3.9 combo update is here:
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
The clone to an external hard drive can be done with these instructions*:
http://www.macmaps.com/backup.html The import of the external hard drive with the migration assistant can be done with these instructions:
http://docs.info.apple.com/article.html?artnum=25773

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Need help with CS4 transitions

Hi,
I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime, it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
Terry Lee Martin
Date: Sat, 22 Aug 2009 23:15:55 -0600
From: [email protected]
To: [email protected]
Subject: Need help with CS4 transitions
From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip. That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player. What's the point?
>

Need help with a mirror image effect

Similar Messages

Maybe you are looking for