Need help with a package
I'm don't know anything about packages or much at all as flash is concern. I'm trying to help the company I work for with a banner for the site... I have everything working fine as long as I do it from my desktop but the moment I put it on the site is blank.. I figure out the it may have something to do with my 1st line. I made a directory on the site with the exact same folder structure but I may be missing something. I thing that maybe it because if i rename or move the folder from where is at on the desktop it gives error in flash. How would i go about doing the import so it will read from a website directory.
package
import cn.com.aven.*;
import flash.display.MovieClip;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.MouseEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.display.Sprite;
import flash.display.Loader;
import flash.net.navigateToURL;
import flash.text.TextField;
import flash.text.TextFieldAutoSize;
import flash.text.TextFormat;
import flash.utils.Timer;
import flash.events.TimerEvent;
public class BannerRotatorMain extends MovieClip
The class files are used for creating the file that you will place on the server, the fla and as file do not get placed on the server, just the html, swf, and possibly others. What files did you load to the server? Do you have a URL you can share?
Similar Messages
-
I'm attempting to build a Nagios package, and I'm pretty close, actually have it installed and running, BUT...
when I run the web interface, it calls some CGI files, and I get an error that it can't find them. It can't find them because it's looking for them in /repo/packages/nagios/usr/sbin/nagios/sbin (with '/repo/packages/nagios' being our local repo where the package was built, and '/usr/sbin/nagios/sbin' being where it should be looking for the CGI files.)
I cheated by setting up that path and copying the files over, just to get it working, but obviously my PKGBUILD needs some help. I think the problem is pretty simple (just like me) and probably has to do with a configure prefix (with 'cgiurl' being the likely culprit.)
Here's my package build, any help would be greatly and fantasticly appreciated.
pkgname=nagios
pkgver=1.2
pkgrel=6
pkgdesc="host and service monitor designed to inform of network problems"
url="http://nagios.org/"
license=()
depends=()
makedepends=()
conflicts=()
replaces=()
backup=()
source=('http://internap.dl.sourceforge.net/sourceforge/nagios/nagios-1.2.tar.gz')
md5sums=('414d70e5269d5b8d7c21bf3ee129309f')
build() {
mkdir $startdir/pkg/usr
mkdir $startdir/pkg/usr/sbin
mkdir $startdir/pkg/usr/sbin/nagios
mkdir $startdir/pkg/etc
mkdir $startdir/pkg/etc/rc.d
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=$startdir/pkg/usr/sbin/nagios --with-cgiurl=/nagios/cgi-bin --with-html=/nagios/ --with-nagios-user=nagios --with-nagios-grp=nagios --with-init-dir=$startdir/pkg/etc/rc.d
make all
make install
make install-init
make install-config
Thanks muchmanica wrote:
When you have a Nagios PKGBUILD ready, could you please make it available to others? That would be great.
Thank you,
Darin
Definitely, if I ever get it working properly. However, since I have it working it working well enough for our purposes, I won't be putting a whole lot of time in the PKGBUILD.
Thanks to Cactus for the advice above, but the build failed (don't have the error message handy.)
This was for Nagios 1.2, I may try building a package for Nagios 2.0b4 and see if I have any luck. -
Need help with function (package)
HI,
Here is my scenario
I have a package (stored procedure), and 3 functions and 1 procedure. Procedure calls all the functions to fetch data. I am having a trouble in accessing one of the functions. I need to count the number of records satisfy my where clause. Following is my example.
FUNCTION S_LEVEL (ME_NO IN VARCHAR2, STDATE IN DATE, ENDATE IN DATE) RETURN NUMBER AS LEVEL NUMBER;
SELECT COUNT(*)
FROM --- xS, -- SP
WHERE XS.SRVNBR = SP.NBR
AND XS.MEMBER_NBR = ME_NO
AND ((XS.DIR IN ('2824','28241','28242','5173','28952')
and xs.date between stdate and endate;
RETURN LEVEL;
END s_level
Now when I call this function from procedure (through a Crystal report), it never return anything and just freeze. Could someome please guide me what I am doing wrong or how it is supposed to be done?
Please help me, I will really appreciate your time and efforts.Khurram,
It's always a bad idea to use a reserved word to name something, regardless whether Oracle allows it or not.
Sooner or later you'll run into trouble.
SQL> create or replace
2 FUNCTION S_LEVEL RETURN NUMBER
3 AS
4 v_cnt NUMBER;
5 -- level NUMBER := 999;
6 begin
7 SELECT level
8 INTO v_cnt
9 FROM dual
10 CONNECT BY rownum < 2;
11
12 RETURN v_cnt;
13
14 END s_level;
15 /
Function created.
SQL> select s_level from dual;
S_LEVEL
1
SQL> create or replace
2 FUNCTION S_LEVEL RETURN NUMBER
3 AS
4 v_cnt NUMBER;
5 level NUMBER := 999;
6 begin
7 SELECT level
8 INTO v_cnt
9 FROM dual
10 CONNECT BY rownum < 2;
11
12 RETURN v_cnt;
13
14 END s_level;
15 /
Function created.
SQL> select s_level from dual;
S_LEVEL
999
SQL> -
Help! Need help with preflight package script
I am trying to write a package with Iceberg to push Office 2004 to 250 Macs. I need a preflight script with a condition that will stop my script if /Applications/Microsoft Office 2004 exists OR if OFFICE 2004 exists. Don't know if searching on the folder name is the best or if there is better way
If it doesn't exist I want it to continue with with placing Office 2004 in the /Applications folder.
I don't know how to do conditions (If, then, end)
PREFLIGHT SCRIPT
IF /Applications/Microsoft Office 2004 folder exist = STOP
IF /Applications/Microsoft Office 2004 folder doesn't exist continue with laying down files/folder in the package.
LAYDOWN FILES
LAY DOWN FILES IN ICEBERG FILE SECTION OF THE PACKAGE
POSTFLIGHT SCRIPT
#!/bin/sh
#Change to root directory
cd /
# Move Microsoft Office X folder to Messages Received folder
mv /Applications/Microsoft\ Office\ X /Messages\ Received
#Open Office 2004 Installer
open /Applications/Utilities/Installers/Office2004Installer
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)A simple condition (not using iceberg) would be:
#!/bin/sh
if [ -e "/Applications/Microsoft Office 2004.app" ]
then
echo "Microsoft Office 2004 exists, aborting installation"
exit 1
fi
open -a "/Applications/Utilities/Installers/Office2004Installer"
If Microsoft Office 2004 is installed then the script will exit with a message. If Microsoft Office 2004 is not there then the last line will be executed and the installer will open.
PowerBook G4 Mac OS X (10.4.8) MacBook Pro -
Can somebody please help me find the jar files for the following packages? I'm new to both Crystal Reports as well as Java so please forgive me if I'm asking for the obvious
com.crystaldecisions.report.web.viewer.*
com.crystaldecisions.sdk.occa.report.application.*
com.crystaldecisions.report.reportengineinterface.*
Thanks,
VThanks, that did the trick!
Edited by: vinnyd on Jun 10, 2010 7:21 PM -
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
We have put together a few FAQs to help with some of the questions you might have about your BT bill.
Please click on the links below to find the answer you're looking for:
I don’t understand my bill – what do all these charges mean?
Help with my rental charges
__ (i) Where can I find a breakdown of my BT rental charges?
__ (ii) I recently changed my package and think I've been charged twice
I need help with my bill
Why is my bill higher than normal?
I thought the calls in my Calling Plan were free - why have I been charged?
Can I view my BT bill online at My BT?
What do I do if I want to change or cancel my BT package?
Check below for is a list of our archived billing posts:
How to get the most from your online account
Why go paper-free?
Live Chat - Connect to a billing advisor
Your Bill explained
How to get the most from your MyBT account and reasons to go paperfree
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.Where can I find a breakdown of my BT rental charges?
The rental charges (sometimes called service charges) shown on your bill are for line rental, plus any additional services such as Calling Features. You're charged for these in advance.
You can view your current rental charges online when you sign up for My BT.
I recently changed my package and think I've been charged twice
When you change your telephone calling plan, calling feature, broadband or BT Vision package, you may get a bill that's confusing or looks like you've been charged twice.
Don't worry, you won't be charged twice. We charge in advance for our services, so you'll see charges for both your old and new services on the bill, even though your old service has been cancelled. You'll be refunded what you paid in advance for your old service on the same bill that shows the advance charges for your new service.
This can also happen when we rename or re-price our products and services. You should see that you've been refunded for the old product name and then charged the same price for the new product name.
Example:
Below is an example of what you might see if you change your package after your bill is issued.
Mr. Smith is on the Unlimited Evening and Weekend Plan and is charged in advance for his service. This is shown on the bill he gets every three months.
Mr. Smith's bill is issued on 1st May and will show the standard advance charges from 1st May to the 31st July, as shown below.
On the May 23rd Mr. Smith calls BT to change from the Unlimited Evening and Weekend Plan to the Unlimited Anytime Plan. Because he's already been charged for the Unlimited Evening and Weekend Plan on the bill from the 1st May, the changes he's made will be shown on his next bill.
When Mr. Smith's next bill is produced on 1st August, he can see the changes to his rental charges. You can see from the highlighted area on the bill pictured below that Mr. Smith has been refunded the charges he's paid in advance for his old Unlimited Evening and Weekend Plan.
This refund is from the time Mr. Smith changed the package (23rd May) until the end of the previous billing period (31st July). The refunded amount shows as -£35.63.
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
[SOLVED] Need help with setting up X
Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help. -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911 -
Need help with JTextArea and Scrolling
import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020What's the problem you're having ???
PS. -
Need help with trim and null function
Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
ThanksHi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
, NVL ( AL1.user_data_text, 'XX' )
FROM Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
, 'XX'
FROM Table -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Need help with Airport Express and so on.
Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection. -
I need help with shooting in my flash game for University
Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
//declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
minesInGame = 15;
//create a timer fires every second
mineMaker = new Timer(6000, minesInGame);
//tell timer to listen for Timer event
mineMaker.addEventListener(TimerEvent.TIMER, createMine);
//start the timer
mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
evt.target.x -= Math.random()*5;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseMine();
//declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
atmInGame = 15;
//create a timer fires every second
atmMaker = new Timer(8000, minesInGame);
//tell timer to listen for Timer event
atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
//start the timer
atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
evt.target.x -= Math.random()*10;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
bg_mc.x -=10;
function moveBackward():void{
bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
//makes the tank move by 10 pixels right
if (evt.keyCode==Keyboard.D)
tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(tankMine_mc);
//var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
//Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
cTime ++;
} else {
//if it has, then allow the user to shoot
shootAllow = true;
//and reset cTime
cTime = 0;
function updateHealthBar():void
percentHP = currentHP / maxHP;
healthBar.barColor.scaleX = percentHP;
if(currentHP <= 0)
currentHP = 0;
trace("Game Over");
updateHealthBar();USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key
-
Need help with conditional query
guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
"FGL_GRNT_CODE" VARCHAR2(60),
"FGL_FUND_CODE" VARCHAR2(60),
"FGL_ACCT_CODE" VARCHAR2(60),
"FGL_ORGN_CODE" VARCHAR2(60),
"FGL_PROG_CODE" VARCHAR2(60),
"FGL_GRNT_YEAR" VARCHAR2(60),
"FGL_PERIOD" VARCHAR2(60),
"FGL_BUDGET" VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH got_greatest_year AS
SELECT fgl.* -- or whatever columns are needed
, MAX ( CASE
WHEN fgl_period = :given_period
THEN fgl_grnt_year
END
) OVER () AS greatest_year
FROM fgl
SELECT SUM (fgl_budget) AS total_budget -- or SELECT *
FROM got_greatest_year
WHERE ( fgl_grnt_year = greatest_year
AND fgl_period = :given_period
OR ( fgl_grnt_year = greatest_year - 1
AND fgl_period = 14
;MiguelHi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH got_greatest_year AS
SELECT TO_NUMBER (fgl_grnt_year) AS grnt_year
, fgl_period
, TO_NUMBER (fgl_budget) AS budget
, MAX ( CASE
WHEN fgl_period = :given_period
THEN TO_NUMBER (fgl_grnt_year)
END
) OVER () AS greatest_year
FROM fgl
, got_cnt_00 AS
SELECT grnt_year
, fgl_period
, budget
, greatest_year
, COUNT ( CASE
WHEN grnt_year = greatest_year
AND fgl_period = '00'
THEN 1
END
) OVER () AS cnt_00
FROM got_greatest_year
SELECT SUM ( CASE
WHEN grnt_year = greatest_year -- New
AND fgl_period = :given_period -- New
AND cnt_00 > 0 THEN budget * 2 -- New
WHEN grnt_year = greatest_year
AND fgl_period = :given_period THEN budget
WHEN grnt_year = greatest_year
AND fgl_period = '00' THEN -budget
WHEN grnt_year = greatest_year - 1
AND fgl_period = '14'
AND cnt_00 = 0 THEN budget
END
) AS total_budget
FROM got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New".
Maybe you are looking for
-
How do I link multiple apple accounts?
I have 3 apple ID's and 2 i tunes libraries...... I want to connect them so they are multi-funtional.???
-
Error while installing - don't have access to directory?
Ok my problems started about a week ago when I tried to start iTunes up, and about 20 or so messages popped up about Mobile Device not working... I honestly don't remember the exact message because I thought I fixed that problem by uninstalling that
-
How to transfer notes between your mac and Ipad without an internet connection?
Let's say you write a note on your Ipad. Then you want to use this very note on your macbook (mountain lion) but unfortunately you have no internet connection available at this moment. Normally, you could just plug in the Ipad using a USB cable and s
-
The back button goes back two pages instead of one
The back button takes me back multiple pages, especially on Facebook
-
Keep getting cannot connect to iTunes message, nothing is working, what else to do?