Need help with a problem after cloning my HD....

I recently cloned my HD to a backup drive. I did an erase and install of Tiger on my original drive. I recently cloned everything back onto my original drive from my backup drive. Now when I go to boot up on my original drive, for the first time ever I must type a Username and Password to log on to the computer. Trouble with this is, I tried my username and password and it would not work. I double, triple, quadruple checked my spelling and tried different combinations just in case i was being stupid, NOPE. It won't let me log on to my main HD. Can anyone help with this?

Let me get this straight. You did
1: Cloned your original boot drive to a external - not a problem
(did you boot from the clone to check it out?, did you use cloning software or???)
2: You erased your original boot drive - ok no problem.
3: You then installed Tiger on your original boot drive - ok no problem there
4: But you cloned from your clone back onto your original, freshly installed Tiger drive?
Why did you do this?
Cloning copies the whole drive, all the little hidden stuff, copy protection etc.
That's why it's called a clone.
Did you mean to say you copied certain folders/files from the clone onto the new Tiger install on your original boot drive?
What folders/files was these?
You need to copy the contents of certain folders inside your User folder, not the folders themselves.
What software did you use to clone with?
Read my detailed instructions here
http://homepage.mac.com/hogfish/Personal6.html
http://homepage.mac.com/hogfish/Personal10.html

Similar Messages

Need help with daq problem

Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
Ken

Hallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

Need Help with Scrolling Problem

I have a JTree displayed in scrollpane. Based on search criterial I select the nodes where the search criteria is found. If the match is located off the screen further down into the tree, the node is highlighted but the scrollpane doesn't automatically scroll down to show it. Any help with this problem is appreciated.

Wow.. Thanks. I thought I would need some fancy code to handle this problem. scrollPathToVisible did it for me. Thanks.

Needing help with crashing PhotoShop after Yosemite OS Update

I updated to the new Yosemite OS and was using PhotoShop CS5.1, and now the program crashes after trying to open more than one photo at a time. I have cleared all settings and updated everything I can update. I can't revert back to my old OS because it wasn't backed up before doing so. Is there a solution to this?

Chris, I was not able to help with this Yosemite CS3 problem, but I did ask for a crash report. If you have time can you go over it?
Another yosemite issue
Gene

I need help with simple problems. im a student.

i'd like to be advanced with my studies so i will post questions.. i need help on how to answer. thank you.
1. create a java program that will evaluate if the value entered is a positive, negative, vowel, consonant and special characters.
im actually done with the positive and negative using if else statements.. i used an integer data type. now my question is how do conjoin the characters when i need to evaluate a vowel and a consonant. i cant use char either. please help. i dont know what to do yet.
2. create java program that will translate the input from numbers to words. e.g. input:123 output: one hundred twenty-three.
i have an idea to use a switch case statement. but i have no idea on how will i be able to do it. so if you guys can help me.. well then thankies..

Welcome to the Sun forums. First, please note that you have posted in the wrong forum. This forum is for topics related to Sun's JavaHelp product. You should post your questions in the New to Java forum.
As part of your learning, you will have to develop the ability to select an approach to a problem, create a design that reflects that approach, and then implement the design with code that you create.
So, it's inappropriate for us to take the problem statement that you have been given and short-circuit your learning process by giving you the implemented problem solution. We can comment on the individual questions that you may have, and point out problems and errors that we see in the code that you develop.
As a hint, when you are stuck, forget about Java and programming. Just start with a sheet of paper and a pencil, and figure out how to layout the task on paper. The consider how to translate that to programming.
If you have problems, post short example code that shows the problem, and explain your question clearly. We can't read minds.
Make sure you post code correctly so that it's not mangled by the forum software, and so that formatting is maintained. Select your typed or pasted code block and press the CODE button above the typing area.

I like many need help with a problem of burning cds

I am trying to burn a simple playlist to a memorex music cd-r. Every time I try a message pops up with the error code of 4261 and then pops out the cd. Any help will be very much appriciated as I am at my wits end with this problem. Thank you so very much!
Windows, Media Center PC

Place the PSU in and connect the 20 pins connector and the 4 pins connector will do.
You may also try swapping the RAMs with another one to test f the RAM is to be at fault.

Need help with G4 problem

Months ago I have a problem on my G4 MDD which intermittently shuts down after putting it to sleep. Now some new problems are coming out. First one I noticed is that sometimes even the power switch light would turn off even though the computer is still on. I can still use the internet and such but noticed that when I need to digitized video footage using FCE there would be some noise on the video which leads me to conclude that the power is unstable. Am I correct in this? 2nd problem is sometimes it will not even power up unless I either pull the plug and plug it in again or open the side of the computer. Now regarding opening the side of the computer, I noticed that if I powered it up with the side door opened and try to close it the computer will shut down. Sometimes I managed to close the door and it will stay on with out a problem. Right now I just leave the side door open and so far power seems to be ok for 72 hours. So is this a logic board problem or a connection problem between the psu and the logic board?

I'm leaning towards Tom's opinion of heat, too. Modern Macs have thermal sensors that shut down the computer if key temps rise too high. Dual processor MDDs run especially hot, as do MDDs with both slots in the front drive bay occupied.
The two cheap things to do first are a) give the inside a cleaning, focusing on the main fan and its housing, and b) check your workspace to ensure that there is room around the computer for intake and exhaust air.
The primary air intake is not the four molded "ducts" on the front but rather the area at the bottom of the front panel below them. Keep that area clear--it's best not to put "bottom breather" computers like the MDD on the floor where that can pull in even more dirt. Crowding the exhaust in the back can run up temps, too. Try to position the tower so nothing is within 8 inches of the back,

Need help with Backup problems - anyone seen this before?

I am experiencing 2 primary problems:
1) When attempting a recent backup with HotSync on my desktop PC (Treo 700p, HotSync Manager v. 6.01, XP): I hadn't backed up for a few weeks, and this time it crashed sometime during the backup of the Calendar (and this behavior is repeated). So I then unchecked the backup of Calendar, but then it just hung on Contacts for about 15 minutes, so I realized it wasn't doing anything anymore (I have lots of contacts, but not not 15 minutes worth). At this point I gave up, but I obviously need to figure out how to make HotSync work again. Any ideas?
2) (not sure if this is the forum to address this): When using Backup Buddy v. 2.04 a couple of days ago, every time I tried to backup, it would get maybe 1/5th into the backup and crash and restart. I figured out in short order that Address.DB is what was causing the crash. [I tried to e-mail the file so I could examine it and save it, but just attaching it in SnapperMail made the device crash]. So I took the chance of deleting the Address.DB (as it seemed small and didn't appear to contain any backup information), and it looks like all of my information was retained. My question here is: two times since the initial problem, something has recreated Address.DB, which again causes the 700p to crash, so I have had to delete it again. So when is this file being (re)created, and what is the purpose of it?
An additional (minor) difficulty that I've had occur on a couple of occasions: After a recovery (where my BackupBuddy information was more current than my HotSync data), I restored, and all the calendar entries were double - 2 identical entries adjacent to one another. Has anyone seen this?
Thanks in advance -
B
Post relates to: Treo 700p (Verizon)

Sounds like the device has become corrupted.
Post relates to: None

I NEED HELP WITH SYNC PROBLEM!

I have already posted about this once and got no help! I can not afford Apple's greedy fee for helping us with a product we paid a lot for
My iPad will not sync with iTunes anymore!
The error I get is: The iPad "Jonnathon's iPad" cannot be synced. An error occurred while reading from the device.
Sometimes the error is different saying it cant find a required disk.
It always occurs just after downloading apps that had been purchased or updated since the last sync.
I have made sure my iTunes is up to date and the iPad does have the latest version of it's OS.
I did do a "Run Diagnostics" and did both "Device connectivity tests" and "Device sync tests" and no problems were found. But I still get the errors!

This is wiered.You better call the Apple and say your problem.Maybe they could help you.Or maybe your iPad has a virus.If you think it has a virus , you have to restore it.

Need help with video problems

Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?

With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Need help with error message after failed iSync: Leopard and Palm OS

I recently upgraded to a new computer which came with Leopard installed. In my old computer, Tiger OS, all was well when syncing to my Palm device.
I tried going from handheld to desktop with slow synch turned on in iSync and now I get this message re: failure--
"iSync Conduit starting 9/6/08 8:21:12 AM
Timeout waiting for Sync Engine, exiting 9/6/08 8:27:31 AM
iSync Conduit synchronization failed
“iSync Conduit” failed (error = #-2)"
Any ideas--please help.

I wish you success.
I have an older Palm, the Zire. Once I got the most recent Palm software and chose, at least for now, to use iSync, I haven't noticed any problems.
Since I haven't used the "T" family of Palms, I can only guess that the process is much the same as with the Zire. You can disable the MAc syncing, move your currently disabled conduits back into Palm syncing, reinstall what Palm lists as your most recent software (and make sure all of your calendar and contacts info is just as you want it), do a sync through the HotSync Manager (ignoring iCal). I'd do a restart just to clear the system. It appears there is a warning note on resetting the iSync history, so you might not want to do that but just manually clean up any inconsistencies in iCal before you try once again.
[I actually wanted to just accept my Palm calendar so trashed my iCal calendar after some questionable syncs, but you can do an export to save the iCal calendar before you wipe it out.]
But my impression is that to get pass the messages you initially wrote up, you'll have to ask the Palm discussions folks for help. They are very helpful.
ec

Need help with serious problem

Hi.
I thought this was a simple problem, but it turned out to be more complicated than I thought.
I have been experimenting with JFrames and found a problem when trying to disable the maximise button of a JFrame.
The program starts up maximising the JFrame with the line of code below:
setExtendedState(this.getExtendedState()|JFrame.MAXIMIZED_BOTH);
This seems to be working fine, because it allow the application to start up full screen.
The next line of code disables the resize button on the JFrame's TitleBar:
setResizable(false);
The problem is that when you dubble-click on the Titlebar of the application it responds when it is not suppose to do so.
The program resizes everything to a minimum. Dubble-clicking on the TitleBar again, it won't allow a resize. It looks as if the program ignores the fact that the JFrame has been sized to full-screen, allowing the user to dubble-click on the application's TitleBar once. After that it is ignored completely.
Have anyone experienced this before? Any help would be appreciated.
Thank you.

HugoBr wrote:
Hi Keith,
Thank you very much for such a quick reply....That's not an SSCCE, See below for an SSCCE... except it doesn't reproduce the problem (for me).
Observered behaviour on Microsoft Windows [Version 6.0.6000] running java version "1.6.0_12" as Administrator is:
1. The form opens in "normal" window state (NOT maximized or minimized).
2. Clicking on the maximize button has no effect.
3. Double clicking on the title-bar has no effect.
So... I presume we're talking apples and oranges (or windows, as the case may be).
Which O/S are you on, what version (distro & release) and what version of the JRE/JDK are you using (java -version, and javac -version respectively).
Does the code I posted reproduce the issue on your machine?
package forums;
import javax.swing.JFrame;
import java.awt.Toolkit;
public class NonResizableMaximisedJFrame
public static void main(String args[]) {
    JFrame frame = new JFrame("Application");
    //frame.setIconImage(Toolkit.getDefaultToolkit().getImage("TitleBar.gif"));
    frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
    frame.setSize( 300, 200 );
    frame.setResizable(false);
    frame.setExtendedState( frame.getExtendedState() | JFrame.MAXIMIZED_BOTH );
    frame.setVisible(true);
}... Also please note: Post code between a pair of tags, to retain formatting (as above)... See also: the CODE button above the forum edit-box... along with some other handy shortcuts... Noobs usually prefer the "rich text" editor... and the old sea dogs hate it. Go figure.
Cheers. Keith.
Edited by: corlettk on 21/03/2009 17:57 ~~ Ooops!

Need help with download problems on Ipod-5th Generation

Hello everyone. Another newbie here who is not technologically inclined but love their Ipod. I just purchased new music videos from the Itunes store, connected my Ipod to the PC and left everything alone until I saw the update complete prompt. However, I am now in a panic because not only did it not sync my new purchases but...all of my previously purchased TV shows, music videos, etc are no longer on my Ipod. I did not request nor click to have anything erased. What can I do to restore my complete library of tunes, videos, tv shows, as I have spent a lot of money on my purchases for this Ipod?
Also, while I'm asking for help: do any of you have problems with downloads timing out before the downloads from the Itunes Store are complete? I purchased several music videos during downloads that said there was an error due to download timeouts; not only did the items never show up in my library but never synced to my Ipod. There were error codes assigned to these videos but...who do I do when this happens? Thanks in advance.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Noob needs help with dreamweaver- problem encountered

madelinebeth.net
This is the website i am trying to create. It is not
complete, but on Safari it looks fine. When i open it on firefox,
it gets all messed up and i dont know how to change it. It
initially gets messed up on dreamweaver when i add links o
different slices. Any help would be greatly appreciated.

> is a bug in firefox that does not render correctly using
tables
Never heard of that. Are you sure?
>yes you can use photoshop, fireworks, etc. thats what
they are for
Could not disagree more. Image apps are for
creating/manipulating images.
Period. The HTML they spew is second-rate at best.
Walt
"Silkrooster" <[email protected]> wrote in
message
news:g0t18h$erv$[email protected]..
>A few things I see that need to be changed. your first
issue is tables,
>there
> is a bug in firefox that does not render correctly using
tables. I don't
> recall
> the bug and how it works, but the easiest way to
overcome the bug is to
> use css
> instead of tables.
> The other issue is to add a DTD at the top of your code,
this will stop
> the
> browsers especially IE from using the quirks mode.
> Other than that the code is fine. These problems can
easily be fixed in
> Dreamweaver. And yes you can use photoshop, fireworks,
etc. thats what
> they are
> for, as long as you know the bugs they may create. The
biggest being the
> DTD,
> next is the tables issue, which photoshop can use either
tables or css.
> Fireworks currently only supports tables, hopefully that
will get fixed in
> the
> next version.
> To make sure your code is correct from the get go, it is
best to
> use
> dreamweaver as it is aware of the DTD and can use css or
tables.
> I agree about the leopard skin, way too hard on the
eyes.
> Hope this helps
>

Need help with a problem after cloning my HD....

Similar Messages

Maybe you are looking for