Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence
Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!
Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Similar Messages
-
Need help with a simple process with FTP Adapter and File Adapter
I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jaypersiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Need help with a simple basketball game.
Hi im new here and I need help with making this simple basketball game.
Im trying to recreate this game from this video. Im not sure if he is using as2 or as3
Or if anyone could help me make a game like this or direct me to a link on how to do it It would be greatly appreciated.If you couldn't tell whether it is AS2 or AS3, it is doubtful you can turn it from AS2 into AS3, at least not until you learn both languages. There is no tool made that does it for you.
-
Need help with a simple program (should be simple anyway)
I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
public void actionPerformed(ActionEvent evt) {
text1.setText(" ");
text2.setText("RE: ");
text3.setText(" ");
public Message() {
super("Write a Message - by Kieran Hannigan");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(370,270);
FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
setLayout(flo);
//Make the bar
JMenuBar bar = new JMenuBar();
//Make "File" on Menu
JMenu File = new JMenu("File");
JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
JMenuItem f2 = new JMenuItem("Open");
JMenuItem f3 = new JMenuItem("Save");
JMenuItem f4 = new JMenuItem("Save As");
JMenuItem f5 = new JMenuItem("Exit");
File.add(f1);
File.add(f2);
File.add(f3);
File.add(f4);
File.add(f5);
bar.add(File);
//Make "Edit" on menu
JMenu Edit = new JMenu("Edit");
JMenuItem e1 = new JMenuItem("Cut");
JMenuItem e2 = new JMenuItem("Paste");
JMenuItem e3 = new JMenuItem("Copy");
JMenuItem e4 = new JMenuItem("Repeat");
JMenuItem e5 = new JMenuItem("Undo");
Edit.add(e5);
Edit.add(e4);
Edit.add(e1);
Edit.add(e3);
Edit.add(e2);
bar.add(Edit);
//Make "View" on menu
JMenu View = new JMenu("View");
JMenuItem v1 = new JMenuItem("Bold");
JMenuItem v2 = new JMenuItem("Italic");
JMenuItem v3 = new JMenuItem("Normal");
JMenuItem v4 = new JMenuItem("Bold-Italic");
View.add(v1);
View.add(v2);
View.add(v3);
View.addSeparator();
View.add(v4);
bar.add(View);
//Make "Help" on menu
JMenu Help = new JMenu("Help");
JMenuItem h1 = new JMenuItem("Help Online");
JMenuItem h2 = new JMenuItem("E-mail Programmer");
Help.add(h1);
Help.add(h2);
bar.add(Help);
setJMenuBar(bar);
//Make Contents of window.
//Make "Subject" text field
JPanel row2 = new JPanel();
JLabel sublabel = new JLabel("Subject:");
row2.add(sublabel);
JTextField text2 = new JTextField("RE:",24);
row2.add(text2);
//Make "To" text field
JPanel row1 = new JPanel();
JLabel tolabel = new JLabel("To:");
row1.add(tolabel);
JTextField text1 = new JTextField(24);
row1.add(text1);
//Make "Message" text area
JPanel row3 = new JPanel();
JLabel Meslabel = new JLabel("Message:");
row3.add(Meslabel);
JTextArea text3 = new JTextArea(6,22);
messagearea.setLineWrap(true);
messagearea.setWrapStyleWord(true);
JScrollPane scroll = new JScrollPane(text3,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//SpaceLine
JPanel spaceline = new JPanel();
JLabel spacer = new JLabel(" ");
spaceline.add(spacer);
row3.add(scroll);
add(row1);
add(row2);
add(spaceline);
add(spaceline);
add(row3);
setVisible(true);
public static void main(String[] arguments) {
Message Message = new Message();
}persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Im DROWNING! need help with a simple java assignment! plz someone help me!
i need help with my java assignment, with validating a sin number. easy for must who know java. im drowning... please help!
You will need to store each digit of the social insurance number in a field of its own. To validate the entry you will:
1. Multiply the 2nd, 4th, 6th and 8th digit by 2.
2. If the product of any of the four multiplications result in a value greater than 9, add the two resulting digits together to yield a single-digit response. For example 6 * 2 = 12, so you would add the 1 and the 2 to get a result of 3.
3. Add these four calculated values together, along with the 1st, 3rd, 5th, and 7th digits of the original number.
4. Subtract this sum from the next highest multiple of 10.
5. The difference should be equal to the 9th digit, which is considered the check digit.
Example of validating S.I.N. 765932546
1st digit 7
2nd digit (6*2 =12 1+2=) 3
3rd digit 5
4th digit (9*2 = 18 1+8 =) 9
5th digit 3
6th digit (2*2 = 4) 4
7th digit 5
8th digit (4*2 = 8) 8
Total 44 next multiple of 10 is 50
50-44 = 6 which is the 9th digit
Therefore the S.I.N. 765932546 is Valid
********* SIN Validation *********
Welcome - Please enter the first number: 120406780
Second digit value multiplied by 2 4
Fourth digit value multiplied by 2 8
Sixth digit value multiplied by 2 12
Eighth digit value multiplied by 2 16
Value derived from 6th digit 3
Value derived from 8th digit 7
The total is 30
Calculated digit is 10
Check digit must be zero because calculated value is 10
The SIN 120406780 is Valid
this is my assignemtn this is what i have! i dont know where to start! please help me!
/* File: sinnumber.java
Author: Ashley
Date: October 2006
Purpose: Lab1
import java.util.Scanner;
public class Lab1
public static void main(String[] args)
Scanner input = new Scanner(System.in);
int sin = 0;
int number0, number1, number2, number3, number4, number5, number6, number7, number8;
int count = 0;
int second, fourth, sixth, eighth;
System.out.print("\t\n**********************************");
System.out.print("\t\n**********SIN Validation**********");
System.out.print("\t\n**********************************");
System.out.println("\t\nPlease enter the First sin number: ");
sin = input.nextInt();
count = int.length(sin);
if (count > 8 || count < 8)
System.out.print("Valid: ");
} -
Not able to push Join.me using SCCM 2012 task sequence
it says Install application action failed with error code 0x80004005, I have tried different options in application packages but it is not working at all.
Please help.
Following is the error I can see in task sequence deployment status:Hi,
Please provide more information as Gerry said. And check the relevant logs on the client, smsts.log,AppIntentEval.log etc.(http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_AppManageLog)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I need help with uninstalling FP so I can install FP or some hemlock
I cannot get flash player to install, uninstall so that I can install, as all the instructions tell us to do. That insane crazy pop up that tells you to install FP, that you can only say no to so that it will go away is making me want to eat a bullet. I cannot take it much longer. I have no idea what to do. And, the crazy thing is that I did do something a couple weeks ago that made it all stop and then somehow it started again. Sux to fix something but not know what you did, so that you break it again. Anywho, I have tried everything from doing a manual install with the downloader, tried downloading an older vs, but I could not find one that was compatible with Vista, which is my operating system (32 bit). I did go to the hyperlink provided on another persons delimna and the site said that I have the most current vs of FP installed. But, it is not showing in my programs list nor is it in my files in my C drive, nor a trace of it in common files. It is not in regedit in local machine/software/adobe. I cannot find it, only the saved programs to uninstall or install it saved to desktop. Wait, I just rechecked my programs and features and it shows flashplayer 10 Actuve X and shockwave player 11.5, both of which are not found anywhere else in my computer. I am so weary of all of this. I just need help. Please, please please, It is horrible because you have to have fp to run certain programs, but it will not run and I do not know if this is a Adobe issue, Windows issue or a Vaio issue.
Hokay, I have Norton 360, it is run regularily, I also ran ESET this week, I use malwarebytes, pest patrol, registry repair. I took adaware and mcafee off my system as I was told that too many virus softwares conflict and can cause problems. I have had my email stolen, along with the book, it appears someone stripped my email and sold it to a spammer. It is not coming from my computer. Makes me very upset. I have turned this into the FBI cyber crimes site, AOL and Yahoo, since the link emails in the details are yahoo accounts. I get the spam emails as well. Ppl who click on the hyperlinks, some of them are getting viruses, but as I said, these are not being generated by me, but rather from the web. I hate these ppl. My system appears clean.
The pop ups are what everyone who is complaining about this issue are getting, I am assuming. I am seeing this complaint all over. Here is the information about the pop up:
It pops up with any navigation you try to do in IE....any. It will pop up ten times in a row during simple functions. Makes you insane. And the only way you can answer it is to click don't allow. End of story. over and over and over. If you research, web wide you are told to uninstall FP and then reinstall, and there are hyper links provided to do it with, and then you are told to try doing it manually with the Adobe downloader. NOTHING works. I am truly so upset, I cannot use my laptop, a storm surge ate my desktop and I am waiting on insurance to replace that the the iPad is limited. I have no idea which or what is the prob, IE, Adobe or Vaio, which is my make of computer. But, this is so ridiculous. -
I need help with doing a system wipe/re-install
I want to completely wipe my Macbook Pro (running Mountain Lion) and do a OS reinstall so that it is as if it was just taken out of the box. I have already moved files I want to keep over to an external. My question is this, do I need to do anything in regards to Microsoft Office or iTunes? Do I need to deauthorize my iTunes or my Microsoft Office activation code? Also, how do I even go about doing this system reset?
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
Need help with program for Inner join
Hello Experts,
I need to create a list from table sbook containing booking number (sbook-bookid), customer number (sbook-customid), customer name (scustom-name) , customer class (sbook-class) and ticket price (sflight-price). I am new to ABAP and am very confused I tried reading up some examples and came up with the attached program
Attached is my program for inner join
Kindly Help
Thanks SuHi Su K
You May use key fields , Foreign keys for joining , Here
SELECT SBOOK~BOOKID SBOOK~CUSTOMID SBOOK~CLASS
SCUSTOM~ID SCUSTOM~NAME FROM SFILGHT
INNER JOIN SBOOK ON SBOOK~CARRID EQ SFILGHT~CARRID
SBOOK~CONNID EQ SFILGHT~CONNID
SBOOK~FLDATE EQ SFILGHT~FLDATE
INNER JOIN SCUSTOM ON SCUSTOM~ID = SBOOK~ID -
I need help with some simple code! Please read!
hi everyone.
I'm having problems with a piece of code, and i'd be extremely greatful if somebody could give me a hand with it. I'm totally new to java and have to make a program for my university degree, but i'm finding it extremely difficult, mainly due to my total lack of apptitude for this type of thing. I know this is easy stuff, but the books I have are no use so any help would be greatly appreciated.
I have to write a program which uses two class files. I want one with the code to produce a simple button, and one to invoke it several times at different locations. I decided to write the program as one class file at first, and thought i'd be able to split it up at later. The program works fine when it is one class file. My book said that to split the two classes up, all i needed to do was change the second class to public, although this seems to not work at all. I'm at my wits end on this, and if anyone could correct my code I'd be eternally greatful.
Here is the first class... (sorry about the lack of indentation)
>>>>>>>>>>
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20);
>>>>>>>
This is the second class....
>>>>>>>
public class PhoneButton {
private Button butt;
public PhoneButton(int a, int b, int c){
setLayout(null);
butt = new Button();
butt.setBounds(a,b,20,20);
add(butt);
>>>>>>>>
My compiler generates errors relating to Button, but i can't do anything to please it.
Also, could anyone give me some pointers on how to add a different number or symbol to each button. That is what I added int c for, but i couldn't get it to work.
Cheers in advance.
Michael MorganI found that there are 5 error in your code.
1. You should import the "java.awt" package to the PhoneButton.java
2. The PhoneButton is not a kind of Component. You cannot not add it to the Phone class
3. the myButton = new PhoneButton(20, 20) does not provide enough parameters to create PhoneButton
4. You cannot add a Button to a PhoneButton. Becaue the PhoneButton is not a kind of Container
Fixed code:
import java.awt.*;
public class PhoneButton extends Button {
public PhoneButton(int a, int b, int c){
setBounds(a, b, 20, 20);
setLabel(String.valueOf(c));
===========================================
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20, 1);
======================
Visual Paradigm for UML - Full Features UML CASE tool
http://www.visual-paradigm.com/ -
I need help with a simple task (PLEASE HELP)
hi, you know how you can make a button and link it to a
different site with the actionscript in this program? well I need
to know of a way like...to make a button and...link it to the next
frame. ok, heres what im trying to make happen...the user presses a
button in the flash program thing and a comment apperars. then they
press it another time and a new one come up...and so on...I could
make like 50 different frames with new comments on them and then
make the button on each frame link to the next frame. is there a
way to do that? if there is I REALLY need your help. please
thanks :)no need to modify anything - look at the first code:
on (release) {
nextFrame();
that's all you need on the button.
If you want it to happen on click and not release:
on (press) {
nextFrame();
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
mybluehair wrote:
> thank you so much. this will really help me. and, is
there any way I can modify
> that script so that its when the mouse is click, and not
the arrow keys?
>
>
>
>
quote:
Originally posted by:
Newsgroup User
> on (release) {
> nextFrame();
> }
>
> from the help docs (F1):
>
> nextFrame function
> nextFrame() : Void
>
> Sends the playhead to the next frame.
>
> Availability: ActionScript 1.0; Flash Player 2
>
> Example
> In the following example, when the user presses the
Right or Down arrow key,
> the playhead goes to
> the next frame and stops. If the user presses the Left
or Up arrow key, the
> playhead goes to the
> previous frame and stops. The listener is initialized to
wait for the arrow
> key to be pressed, and
> the init variable is used to prevent the listener from
being redefined if the
> playhead returns to
> Frame 1.
>
> stop();
>
> if (init == undefined) {
> someListener = new Object();
> someListener.onKeyDown = function() {
> if (Key.isDown(Key.LEFT) || Key.isDown(Key.UP)) {
> _level0.prevFrame();
> } else if (Key.isDown(Key.RIGHT) ||
Key.isDown(Key.DOWN)) {
> _level0.nextFrame();
> }
> };
> Key.addListener(someListener);
> init = 1;
> }
>
>
>
> ******************************************
> --> **Adobe Certified Expert**
> --> www.mudbubble.com
> --> www.keyframer.com
>
>
>
>
> mybluehair wrote:
> > hi, you know how you can make a button and link it
to a different site with
> the
> > actionscript in this program? well I need to know
of a way like...to make a
> > button and...link it to the next frame. ok, heres
what im trying to make
> > happen...the user presses a button in the flash
program thing and a comment
> > apperars. then they press it another time and a new
one come up...and so
> on...I
> > could make like 50 different frames with new
comments on them and then make
> the
> > button on each frame link to the next frame. is
there a way to do that? if
> > there is I REALLY need your help. please
> >
> > thanks :)
> >
>
>
>
> -
I am building a simple flash movie clip in Flash cs4. All I want to do is run the play head through a one 5 frame scene and stop, and then you press a button that will send the play head to the next 10 frame motion tween scene.
When I run the movie all I get is a movie clip that pauses for a millisecond then loops back around.
I have three different books on flash action script, read all three still not doing so hot. I am using the navigational button concept maybe that is what I am doing wrong. Can someone show me the right method or lead me in the right direction.
farosgfx ( [email protected] )You can just place an invisible button on the top layer of
the flash time line and code it to getURL. When you said "hyperlink
to another page", are you referring to an html page or another swf
file? To make an invisible button in Flash, you can hit Ctrl+F8 to
bring up the dialog box to create a new symbol, name your button,
make sure you select the type of button, hit ok, now you are inside
the button and need to create a "hit" area. Click on the "hit"
state and press F7 to create a blank key frame. Using the drawing
tools, select the square, no stroke, and any fill color you want,
draw a square shape, click on the shape and in your Info Panel,
change the size of this shape to match the size of your stage,
lastly, make sure the registration point is (0,0) by using the
Align Panel. Go back to your main time line, add a layer on your
time line and make sure it's at the top, drag your new button from
the library to the stage and align it to (0,0).
There are two ways to code the button, so to make it easier,
click on the button once to select it, hit F9 to bring up the
actions panel and type this
on(release){
getURL("
http://www.someWebsite.com",
"_blank");// you can also use "_self" //
If some of this isn't new to you, disregard parts of it. If
you have any buttons in your Flash application, this will cause
problems because the invisible button will counter-act anything
below it. Let me know if this works for you. Of course, this all
assumes you have access to the flash file. -
Need help with a simple problem with monitors
I used a power g4 and I want to use two monitors for final cut. I have the apple monitor 4:3 and I got a new 22inch 16:9 monitor. I want to use them both for final cut. I want to use 4:3 for bins. When i hook them up the 4:3 has the time lines and canvas. How do i make the 16:9 the time line and the 4:3 flat screen the bins. I need to reverse how they are. Someone help please
I will try that. I will kick myself in the *** if thats all i need to do
-
Need help with a "simple" problem :)
Hello everyone!!
I would be very glad if anyone could help me! I created a
test with AW and it works very well. My problem is that in the
".txt" file that is created (appendextfile), the "firsttrycorrect"
responses keep adding themselves among the exercices. How can I do
to set the count to zero, so that each exercise has is own number
of correct responses? Do I have to restart the file everytime??!
Thx in advance...Just to be clear: You are using the FirstTryCorrect variable,
and you want
the FirstTryCorrect variable to reset when you go to the next
exercise? Try
Initialize(FirstTryCorrect) at the beginning of the next
exercise.
HTH;
Amy
"oukaischunomai" <[email protected]> wrote
in message
news:fmo42t$s7o$[email protected]..
> Thx to have read me :) I'll try to be clear, but I'm
sorry I don't know AW
> 7
> very well and my english is not that good...! So I'm
creating a program:
> first
> of all, the person has to enter her/his name
("username") and a .txt file
> is
> being created at her/his name. Then the person has to
click on a button
> to
> choose what she/he wants to study (she/he has the choice
between 3
> exercices:
> active/passive/relative sentences). In all exercises,
the person has to
> read a
> written sentence, then choose the image corresponding to
the sentence
> between 4
> choices and finally click on it (I created an
interaction and 3 responses
> have
> the "wrong" status and only 1 has the "correct" status).
Then it goes to
> the
> next sentence. At the end of each exercise
(active/passive/relative), the
> results are written in the .txt file previously created
(I simply put:
> AppendExtFile (Username^".txt"; FirstTryCorrect) ), so I
can have a
> feedback
> about the performances of the person... I hope it's
clear enough for the
> moment? :) My problem is: when the person begins the 2nd
exercise
> (passive),
> the correct responses are keeping adding themselves to
them of the 1st
> exercise
> (active). So my question is, how can I do, so that the
"correct response
> counter" is back to 0 at the beginning of each new
exercise??
> -
Need help with a simple application
hi guys, i am doing a school project. i used studio enterprise 8 to create a j2ee application, using mysql as the database. i believe i have installed all the encessary and the classpaths are right.
i coded, build and run the application, but it isnt working...to be sure the database is working, i wrote a simple code just to connect to the database and insert datas. it worked. but when i run the application, everything complied correctly, and when i use cmd to run the test file, it executed with no errors. but the database didnt changed.
can someone guide me along? as there are a few files, i have uploaded it to http://www.comp.nus.edu.sg/~ngjianfe/IRMS.zip
thanks!hihi, there has been much progression but i am having problem again. i dont know what went wrong also. checked everything i could, including ejb-jar.xml, sun-cmp-mappings.xml, sun-ejb.jar.xml, sun-web.xml, web.xml.
i wrote 3 entity beans, with 3 respective session beans. 2 of them i tested and works perfectly fine. but for the other way, which i have coded the same way, did not work. below is the errors from the server log...
[#|2006-02-10T16:00:42.656+0800|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5004: UnExpected error occured while creating ejb container
java.lang.ClassNotFoundException: com.sun.ejb.containers.TimerBean_2100919770_ConcreteImpl
at com.sun.enterprise.loader.EJBClassLoader.findClass(EJBClassLoader.java:710)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at com.sun.ejb.containers.BaseContainer.<init>(BaseContainer.java:267)
at com.sun.ejb.containers.EntityContainer.<init>(EntityContainer.java:219)
at com.sun.ejb.containers.TimerBeanContainer.<init>(TimerBeanContainer.java:39)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:234)
at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:481)
at com.sun.enterprise.server.ApplicationLoader.load(ApplicationLoader.java:125)
at com.sun.enterprise.server.TomcatApplicationLoader.load(TomcatApplicationLoader.java:95)
at com.sun.enterprise.server.AbstractManager.loadSystem(AbstractManager.java:287)
at com.sun.enterprise.server.SystemAppLifecycle.loadSystemApps(SystemAppLifecycle.java:134)
at com.sun.enterprise.server.SystemAppLifecycle.onStartup(SystemAppLifecycle.java:75)
at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]
[#|2006-02-10T16:00:42.656+0800|WARNING|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5021: Application NOT loaded: [__ejb_container_timer_app]|#]
[#|2006-02-10T16:00:43.156+0800|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: UsersManagerBean; containerId: 74682042230767621|#]
[#|2006-02-10T16:00:43.312+0800|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: UserPositionsManagerBean; containerId: 74682042230767619|#]
[#|2006-02-10T16:00:43.406+0800|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5090: Exception in creating EJB container [java.lang.ClassNotFoundException: irmsEB.UserHierarchyBean_1449721501_ConcreteImpl]|#]
[#|2006-02-10T16:00:43.406+0800|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|appId=irms moduleName=irms-EJBModule_jar ejbName=UserHierarchyBean|#]
[#|2006-02-10T16:00:43.406+0800|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5004: UnExpected error occured while creating ejb container
java.lang.ClassNotFoundException: irmsEB.UserHierarchyBean_1449721501_ConcreteImpl
at com.sun.enterprise.loader.EJBClassLoader.findClass(EJBClassLoader.java:710)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at com.sun.ejb.containers.BaseContainer.<init>(BaseContainer.java:267)
at com.sun.ejb.containers.EntityContainer.<init>(EntityContainer.java:219)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:273)
at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:481)
at com.sun.enterprise.server.ApplicationLoader.load(ApplicationLoader.java:125)
at com.sun.enterprise.server.TomcatApplicationLoader.load(TomcatApplicationLoader.java:95)
at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:185)
at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:200)
at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]
[#|2006-02-10T16:08:15.781+0800|WARNING|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee._CORBA_.util|_ThreadID=16;|"IOP00100006: (BAD_PARAM) Class com.sun.ejb.containers.EJBLocalObjectInvocationHandler is not Serializable"
org.omg.CORBA.BAD_PARAM: vmcid: OMG minor code: 6 completed: Maybe
at com.sun.corba.ee.impl.logging.OMGSystemException.notSerializable(OMGSystemException.java:989)
at com.sun.corba.ee.impl.logging.OMGSystemException.notSerializable(OMGSystemException.java:1004)
at com.sun.corba.ee.impl.orbutil.ORBUtility.throwNotSerializableForCorba(ORBUtility.java:718)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_abstract_interface(CDROutputStream_1_0.java:652)
at com.sun.corba.ee.impl.encoding.CDROutputStream.write_abstract_interface(CDROutputStream.java:259)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.writeAbstractObject(Util.java:462)
at javax.rmi.CORBA.Util.writeAbstractObject(Util.java:131)
at com.sun.corba.ee.impl.io.IIOPOutputStream.writeObjectField(IIOPOutputStream.java:724)
at com.sun.corba.ee.impl.io.IIOPOutputStream.outputClassFields(IIOPOutputStream.java:790)
at com.sun.corba.ee.impl.io.IIOPOutputStream.defaultWriteObjectDelegate(IIOPOutputStream.java:204)
at com.sun.corba.ee.impl.io.IIOPOutputStream.outputObject(IIOPOutputStream.java:573)
at com.sun.corba.ee.impl.io.IIOPOutputStream.simpleWriteObject(IIOPOutputStream.java:159)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueInternal(ValueHandlerImpl.java:225)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueWithVersion(ValueHandlerImpl.java:207)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:147)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.writeRMIIIOPValueType(CDROutputStream_1_0.java:801)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:850)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:864)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_abstract_interface(CDROutputStream_1_0.java:647)
at com.sun.corba.ee.impl.encoding.CDROutputStream.write_abstract_interface(CDROutputStream.java:259)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.writeAbstractObject(Util.java:462)
at javax.rmi.CORBA.Util.writeAbstractObject(Util.java:131)
at com.sun.corba.ee.impl.io.IIOPOutputStream.writeObjectOverride(IIOPOutputStream.java:138)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:287)
at java.util.ArrayList.writeObject(ArrayList.java:569)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.io.IIOPOutputStream.invokeObjectWriter(IIOPOutputStream.java:605)
at com.sun.corba.ee.impl.io.IIOPOutputStream.outputObject(IIOPOutputStream.java:571)
at com.sun.corba.ee.impl.io.IIOPOutputStream.simpleWriteObject(IIOPOutputStream.java:159)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueInternal(ValueHandlerImpl.java:225)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueWithVersion(ValueHandlerImpl.java:207)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:147)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.writeRMIIIOPValueType(CDROutputStream_1_0.java:801)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:850)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:864)
at com.sun.corba.ee.impl.encoding.CDROutputStream.write_value(CDROutputStream.java:242)
at com.sun.corba.ee.impl.copyobject.ORBStreamObjectCopierImpl.copy(ORBStreamObjectCopierImpl.java:39)
at com.sun.corba.ee.impl.copyobject.FallbackObjectCopierImpl.copy(FallbackObjectCopierImpl.java:34)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.copyObject(Util.java:718)
at javax.rmi.CORBA.Util.copyObject(Util.java:316)
at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl.copyResult(DynamicMethodMarshallerImpl.java:414)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:169)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(Unknown Source)
at irmsSB._UserHierarchyManagerRemote_DynamicStub.findJunior(_UserHierarchyManagerRemote_DynamicStub.java)
at org.apache.jsp.UserHierarchyTest_jsp._jspService(UserHierarchyTest_jsp.java:100)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.GeneratedMethodAccessor58.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
|#]
[#|2006-02-10T16:08:15.796+0800|WARNING|sun-appserver-pe8.2|javax.enterprise.system.stream.err|_ThreadID=16;|java.rmi.MarshalException: CORBA BAD_PARAM 1330446342 Maybe; nested exception is:
java.io.NotSerializableException:
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:230)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.wrapException(Util.java:651)
at javax.rmi.CORBA.Util.wrapException(Util.java:279)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:185)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(Unknown Source)
at irmsSB._UserHierarchyManagerRemote_DynamicStub.findJunior(_UserHierarchyManagerRemote_DynamicStub.java)
at org.apache.jsp.UserHierarchyTest_jsp._jspService(UserHierarchyTest_jsp.java:100)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.GeneratedMethodAccessor58.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
Caused by: java.io.NotSerializableException:
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:223)
... 42 more
Caused by: org.omg.CORBA.BAD_PARAM: vmcid: OMG minor code: 6 completed: Maybe
at com.sun.corba.ee.impl.logging.OMGSystemException.notSerializable(OMGSystemException.java:989)
at com.sun.corba.ee.impl.logging.OMGSystemException.notSerializable(OMGSystemException.java:1004)
at com.sun.corba.ee.impl.orbutil.ORBUtility.throwNotSerializableForCorba(ORBUtility.java:718)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_abstract_interface(CDROutputStream_1_0.java:652)
at com.sun.corba.ee.impl.encoding.CDROutputStream.write_abstract_interface(CDROutputStream.java:259)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.writeAbstractObject(Util.java:462)
at javax.rmi.CORBA.Util.writeAbstractObject(Util.java:131)
at com.sun.corba.ee.impl.io.IIOPOutputStream.writeObjectField(IIOPOutputStream.java:724)
at com.sun.corba.ee.impl.io.IIOPOutputStream.outputClassFields(IIOPOutputStream.java:790)
at com.sun.corba.ee.impl.io.IIOPOutputStream.defaultWriteObjectDelegate(IIOPOutputStream.java:204)
at com.sun.corba.ee.impl.io.IIOPOutputStream.outputObject(IIOPOutputStream.java:573)
at com.sun.corba.ee.impl.io.IIOPOutputStream.simpleWriteObject(IIOPOutputStream.java:159)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueInternal(ValueHandlerImpl.java:225)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueWithVersion(ValueHandlerImpl.java:207)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:147)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.writeRMIIIOPValueType(CDROutputStream_1_0.java:801)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:850)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:864)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_abstract_interface(CDROutputStream_1_0.java:647)
at com.sun.corba.ee.impl.encoding.CDROutputStream.write_abstract_interface(CDROutputStream.java:259)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.writeAbstractObject(Util.java:462)
at javax.rmi.CORBA.Util.writeAbstractObject(Util.java:131)
at com.sun.corba.ee.impl.io.IIOPOutputStream.writeObjectOverride(IIOPOutputStream.java:138)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:287)
at java.util.ArrayList.writeObject(ArrayList.java:569)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.io.IIOPOutputStream.invokeObjectWriter(IIOPOutputStream.java:605)
at com.sun.corba.ee.impl.io.IIOPOutputStream.outputObject(IIOPOutputStream.java:571)
at com.sun.corba.ee.impl.io.IIOPOutputStream.simpleWriteObject(IIOPOutputStream.java:159)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueInternal(ValueHandlerImpl.java:225)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueWithVersion(ValueHandlerImpl.java:207)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:147)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.writeRMIIIOPValueType(CDROutputStream_1_0.java:801)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:850)
at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:864)
at com.sun.corba.ee.impl.encoding.CDROutputStream.write_value(CDROutputStream.java:242)
at com.sun.corba.ee.impl.copyobject.ORBStreamObjectCopierImpl.copy(ORBStreamObjectCopierImpl.java:39)
at com.sun.corba.ee.impl.copyobject.FallbackObjectCopierImpl.copy(FallbackObjectCopierImpl.java:34)
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.copyObject(Util.java:718)
at javax.rmi.CORBA.Util.copyObject(Util.java:316)
at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl.copyResult(DynamicMethodMarshallerImpl.java:414)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:169)
... 39 more
|#]
anyone got any idea? thanks
Maybe you are looking for
-
we have several iphones in the family and want to share music. do we need to have everyone on same account?
-
Apple TV update results in flashing front light and warning that HDMI cable is faulty
Just got a panic call from my Father who started updating his Apple TV (version unknown but it's a 3 as far as I know) and left the update unattended for 45 minutes or so. When he returned the screen shows an HDMI cable and a message that his HDMI c
-
Hi everyone, So I have a rather common problem but I thought I would ask anyway. My friend gave me his MacBook Pro to fix because the HDD failed. The hard drive clicks when the computer is turned on and the computer will also not boot. When the power
-
Error:INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB
in http->xi->file when i use http sender adapter with http client i got the error message as follow: <SAP:Error><SAP:Category>XIServer</SAP:Category> <SAP:Code>INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code> <SAP:Stack>System not configured as Integ
-
Issue on Payment statement for customer
Hi, I am not sure what is the customer payment statement process. Now I have a scenario: One sales order have one sold -to party ,one ship-to party,one bill-to party, one payer and one payment statement receiver with partner function. As I known,the