Need Help with a very simple view transition scenario

Hello All,
I am trying to learn how view transitions work and I am having a very hard time with the sample apps (like transition view app etc)...I need something much more simple at first. Can you please provide me a little guidelines on how to set up this following scenario:
App loads up and shows a title screen with a button that says go. When you click on the go button the title screen fades out and a new view fades in (or slides in, or anything at all).
Right now I have 3 nib files. There is the main one that is called on application start (tied with MainViewController, a subclass of IUViewcontroller just like in the hello world app. After the app loads the app delegate object tells the MainViewController object to load in another view controller object (via addSubview) which is tied with the second nib file; my title screen with the button. When I press the button I was thinking in the IBAction function to tell the MainViewController object to remove (or transition out somehow) the title screen view controller object then add the other view (third nib file in). This is the part I can't get working. Am I on the right track or have a gone hideously astray? Thank you!

hi,
i managed to do this for my app. (think i referred to viewTransitions sample code and modified quite a bit)
i can't remember this well cos i did this quite a while back, but i will try to help as much as possible
1) from the appdelegate i initialize a root controller (view controller class)
2) this root controller actually contains two other view controllers, let's call it viewAController and viewBController, for the screens which u are going to toggle in between. and there's also a function, let's call it toggleMenu, which will set the menus to and fro. i copied this whole chunk from the sample code. it actually defines the code on what to do, i.e. if current view is A switch to B and vice versa.
3) inside the controller files, you need to implement the toggleMenu function too, which basically calls the rootController's toggleMenu
4) we also need viewA and viewB files(view class)
5) need to add the .xib files for the respective views and link them up to the controller class. i did not use the .xib files for ui layout though, because of my app's needs. however, it will not work properly without the .xib files.
5) inside the view class of both views, i.e. viewA.m and viewB.m, you need to create a button, that will call the toggleMenu function inside the respective controller class.
it will look something like this:
[Button addTarget:ViewAController action:@selector(toggleMenu:) forControlEvents:UIControlEventTouchUpInside];
so the flow is really button (in view)-> toggleMenu(viewController) -> toggleMenu(rootController)
i'm sorry it sounds pretty hazy, i did this part weeks before and can't really remember. i hope it helps.

Similar Messages

Need help with a very simple example. Trying to reference a value

Im very new to Sql Load and have created this very simple example of what I need to do.
I just want to reference the ID column from one table to be inserted into another table as DEV_ID.
Below are my: 1) Control File, 2) Datafile, 3) Table Description, 4) Table Description
1) CONTROL FILE:
LOAD DATA
INFILE 'test.dat'
APPEND
INTO TABLE p_ports
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
DEV_id REF(CONSTANT 'P_DEVICES',NAME),
NAME FILLER ,
PORT_NO
2) DATAFILE:
COMM881-0326ES09,6
3) TABLE DESCRIPTION:
SQL> describe p_ports
Name Null? Type
ID NOT NULL NUMBER(10)
DEV_ID NOT NULL NUMBER(10)
PORT_NO NUMBER(3)

hi,
i managed to do this for my app. (think i referred to viewTransitions sample code and modified quite a bit)
i can't remember this well cos i did this quite a while back, but i will try to help as much as possible
1) from the appdelegate i initialize a root controller (view controller class)
2) this root controller actually contains two other view controllers, let's call it viewAController and viewBController, for the screens which u are going to toggle in between. and there's also a function, let's call it toggleMenu, which will set the menus to and fro. i copied this whole chunk from the sample code. it actually defines the code on what to do, i.e. if current view is A switch to B and vice versa.
3) inside the controller files, you need to implement the toggleMenu function too, which basically calls the rootController's toggleMenu
4) we also need viewA and viewB files(view class)
5) need to add the .xib files for the respective views and link them up to the controller class. i did not use the .xib files for ui layout though, because of my app's needs. however, it will not work properly without the .xib files.
5) inside the view class of both views, i.e. viewA.m and viewB.m, you need to create a button, that will call the toggleMenu function inside the respective controller class.
it will look something like this:
[Button addTarget:ViewAController action:@selector(toggleMenu:) forControlEvents:UIControlEventTouchUpInside];
so the flow is really button (in view)-> toggleMenu(viewController) -> toggleMenu(rootController)
i'm sorry it sounds pretty hazy, i did this part weeks before and can't really remember. i hope it helps.

Need help with something VERY SIMPLE

I'm brand new to Motion - as if today - but I'm only trying to do some VERY simple motions with photos - a simultaneous zoom in and reposition. What I've been doing is setting the starting key frame at one position (adjusting the x, y) and setting the scale. Then I create a second key frame and adjust the postion and scale. It will do the zoom, but then it re adjusts the starting position. If I readjust the starting key frame, it automatically readjusts the second key frame. I don't get it! Applying the various 'behaviors' doesn't seen to help. Certainly there's something obvious here that I'm missing - as I was able to do this in FCP. For some reason the key frames are not fixed when it comes to position.

hi,
a couple of thoughts?
did you actually set a keyframe for position at the first frame?
Also unless you are parked right on a keyframe or have the record button on, if you adjust a value, all the values for all keyframes adjust accordingly. I often mess something up because I wasnt parked on a keyframe.
hth
adam

Help with a very simple horizontal Spry menu

Hi,
I’ve always received great help here and I’m sure that if I explain the issue I’m having properly I’ll get some good input.
This is to do with a very simple horizontal Spry menu, there’s no dropdown involved, only a color change on the rollover. The menu items are in a shade of blue, then on the rollover each menu item changes to a shade of red, the font color remains white for both.
What’s mentioned above works flawlessly, the problem I’m having is this … On the rollover when the menu block items turn red, I’m attempting to add a 1px border around the entire block, but when I do the block item seems to want to change its width and height slightly when it’s rolled-over. As I said, without the border it works perfect.
Any suggestions will be appreciated.

steve0308 wrote:
Hi,
I’ve always received great help here and I’m sure that if I explain the issue I’m having properly I’ll get some good input.
This is to do with a very simple horizontal Spry menu, there’s no dropdown involved, only a color change on the rollover. The menu items are in a shade of blue, then on the rollover each menu item changes to a shade of red, the font color remains white for both.
What’s mentioned above works flawlessly, the problem I’m having is this … On the rollover when the menu block items turn red, I’m attempting to add a 1px border around the entire block, but when I do the block item seems to want to change its width and height slightly when it’s rolled-over. As I said, without the border it works perfect.
Any suggestions will be appreciated.
You also have to apply the border to the 'a' css selector. If you just apply it to the 'a:hover' css selector then the tab will grow slightly bigger because its adding more width and height to the overall structure.

[New] Help with a VERY simple asterisk program.

Alright...I feel like a complete idiot asking this question..but I'm having such trouble writing this program. The program description is here:
Write a Java application using two for loops to produce the following pattern of asterisks.
I guess I'm really bad at algorithms yeah? Haha...well, any help would be very much appreciated.

Hi,
I don't think you don't need to look through any C programming books.
When you have a problem like this, do some thinking about what methods you need to use and what the general structure of the program will be.
You need to print asterisks out to the screen... so you'll need:
System.out.println
System.out.printAnd you already know that you need two loops.
Now you can ask yourself how you might use the print statements with two loops in order to design a basic structure for the program.
You have 8 lines, so you might want a loop that runs through 8 times, one of the lines printed each time.
Within this loop, you need another loop that prints out *'s. This loop could run once for each asterisk, but because there is a different number of asterisks on each line, the number of times this loop runs would be variable.
So a basic structure:
//loop1 that runs 8 times
    //loop2 that runs once for each *
        print one star
    //end loop2
//end loop1The key now is to recognise the difference between print and println. I don't know if you alread know, but System.out.print will print a string without creating a new line at the end, and println will create a new line at the end of the printed string.
Hope that helps. If you have any other problems, post specific questions along with the code you've written and are having trouble with.

Help with a VERY simple Automator script

i spent a few minuted trying to figure this out, but concluded it might be easier to simply ask in the forum how to do this.
I want to
1) open a terminal window
2) execute the following commands:
cd /Users/lenny/ventrilo/
lenny$ /Users/lenny/ventrilo/ventrilo_srv
thats it...
please help using very small works
ideally i would like this to be execute when i start up my computer. (i.e. a login script)

If you need the Terminal window to stay open, then you're looking at scripting Terminal. You can do this with Automator's run applescript action, or you can just use Script Editor (in Applications > AppleScript). Either way you will need to save the workflow/script as an application and drag it to your Login Items (in System Preferences > Accounts).
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Terminal"
activate
set commands to "cd /Users/lenny/ventrilo/
/Users/lenny/ventrilo/ventrilo_srv"
do script commands in front window
end tell</pre>
PowerMac G5 (June 2004) 2x1.8GHz 1.25GB, PowerBook G4 (12-inch DVI) 1x1GHz 768MB Mac OS X (10.4.3)

Help with Forte: very simple question, please help!

I recently downloaded the community version of Forte (Sun One) but can't seem to get any new empty class programs to execute properly. I know something is probably not set up right, which is why I really need a little help to get started. Regardless of the code I try to execute, the output error is always:
"java.lang.NoClassDefFoundError: (name of program)
Exception in thread "main" "
Please let me know what I'm not doing right. I would really appreciate anybody's thoughts on this problem because I would love to get Forte working so I can start learning Java. Thanks for your input!

I would tell you that Forte is not a tool for the beginner. you should look at something simpler. Forte is a fully integrated development environment. I would look at a simple editor like emacs, available at gnu.org. The commands of this editor are quite difficult to get use to.
As for setting the class varialbe. It depends on the O/s that you are using. win98/me is different than NT/xp. Need to know one or the other before explaining.
email me if you have question. email address is in my profile.

Need help with a very strange problem

I've been using Macs since the Apple IIe and I haven't seen anything like this. I need some help "diagnosing" where the problem might lie, and what to do about it.
I have the dock to appear and disappear automatically. But when I run the mouse down to the bottom of the screen, it doesn't appear. I have to "click" in that area to get it to appear. Also, when I select a menu in the finder or in an application, and then scroll through the menu items, they do not highlight as they should. I can click on an item to activate it, but they aren't highlighted as I scroll through.
Also, in some applications, windows don't appear and disappear normally as they should. For example, with Adobe Lightroom I have it set up so that the adjustment panels on the left and right automatically appear and disappear. But they aren't doing that anymore.
A restart and permissions repair will temporarily solve the problem, but it inevitably returns (sometimes within an hour, sometimes a few days). I have three users on my computer, and it happens in each user account.
A couple days ago, I did an archive & install. That didn't fix it. Then yesterday I did a full reinstall of Leopard and then used Migration Assistant and Time Machine to migrate my users & applications to the new install. After I repaired permissions and rebooted, the problem was right there again.
It doesn't seem like the problem is with a user account, since all three accounts have it. So why didn't a reinstall of the system fix it? And what can I do now?

Althought the behavior is the same in all three accounts, if all are working accounts I would suspect there is something all of them have installed that could be the source of the problem. Try creating a new admin account, and leave it just the way Apple creates it--don't add anything nor modify it in any way. Log into that account and see if it works correctly.
If that account is also misbehaving, try restarting, and when you hear the chime hold down the Shift key so that you boot into Safe Mode (you'll see a notice in the splash screen about being in Safe Mode). The boot will take longer (perhaps even considerably longer) as the system runs disk repair, empties some caches, disables all third party startup items, as well as all Apple startup items not strictly necessary for the machine to run. See the menus and Dock now behave correctly.
Since the problem is evidently somewhat intermittent in nature it may take some patience to discover what is wrong. You might also disconnect everything that didn't come with the Mac, reboot, and use only the Apple keyboard and Apple mouse and run for a bit to see how that works. If you are using a third party mouse that required installing something that would be my guess as a "prime suspect" for the cause of the problems.
Francine
Francine
Schwieder

Need help with starting a simple calculator

I have this simple calculator I just started on, and I'm having just a few problems. First of all, I don't know how to append text to a textfield. Maybe I would have to create a string buffere or something. Then, when the user clicks one of the buttons, the compiler goes crazy, and nothing is displayed.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Calculator extends JFrame implements ActionListener
     JButton[] btnNums;
     JButton btnBack;
     JButton btnClear;
     JButton btnCalculate;
     String[] strNames;
     JTextField txtDisplay;
     public Calculator()
          Container content = getContentPane();
          setSize(210,250);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          /* construct a JPanel and the textfield that
           * will show the inputed values and outputed
           * results
          JPanel jpDisplay = new JPanel();
          jpDisplay.setLayout(new BorderLayout());
          txtDisplay = new JTextField(15);
          txtDisplay.setHorizontalAlignment(JTextField.RIGHT);
          jpDisplay.add(txtDisplay);
          /* contstruct a JPanel that will contain a back
           * button and a clear button.
          JPanel jpRow2 = new JPanel();
          btnBack = new JButton("Backspace");
          btnClear = new JButton("Clear");
          btnClear.addActionListener(this);
          jpRow2.add(btnBack);
          jpRow2.add(btnClear);
          /* construct a string array with all the names of the
           * buttons, then in a for loop create the new buttons
           * and add their name and an actionListener to them.
          String[] strNames = {"7","8", "9","/", "4", "5", "6","*", "1", "2", "3","+", "0", "+/-", ".", "-"};
          btnNums = new JButton[16];
          JPanel jpButtons = new JPanel();
          jpButtons.setLayout(new GridLayout(4,4));
            for (int i = 0; i < 16; i++)
                 btnNums[i] = new JButton(strNames);
               btnNums[i].addActionListener(this);
               jpButtons.add(btnNums[i]);
          /* construct the final JPanel and add a
          * calculate button to it.
          JPanel jpLastRow = new JPanel();
          btnCalculate = new JButton("Calculate");
          btnCalculate.addActionListener(this);
          jpLastRow.add(btnCalculate);
          /* set the contentPane and create the layout
          * add the panels to the container
          setContentPane(content);
          setLayout(new FlowLayout());
          setResizable(false);
          content.add(jpDisplay, BorderLayout.NORTH);
          content.add(jpRow2);
          content.add(jpButtons);
          content.add(jpLastRow);
          setTitle("Mini Calculator");
          setVisible(true);
     public void actionPerformed(ActionEvent ae)
          for (int i =0; i < 16; i++)
               if (ae.getSource() == btnNums[i])
                    txtDisplay.setText(strNames[i]);
     public static void main(String[] args)
          Calculator calc = new Calculator();

First of all, I don't
know how to append text to a textfield.
textField.setText( textField.getText() + TEXT_YOU_WANT_TO_APPEND );
Then,
when the user clicks one of the buttons, the compiler
goes crazy, and nothing is displayed.No, the compiler doesn't go crazy, the compiler has done it's job by then. However, you do get a NullPointerException, and the stacktrace tells you that the problem is on the following line:
txtDisplay.setText(strNames);
It turns out that strNames is null. I leave it to you to find out why. ;-)

Need help getting a very simple RMI program running

I've been pulling my hair out trying to get RMI running on windows. I decided to do a verbatim copy of a tutorial to see if it would work, well it didn't. Here is the sample code:
//HelloInterface.java - located in dir c:\java
import java.rmi.*;
public interface HelloInterface extends Remote {
public String say() throws RemoteException;
//Hello.java - located in c:\java
import java.rmi.*;
import java.rmi.server.*;
public class Hello extends UnicastRemoteObject implements HelloInterface {
private String message;
public Hello (String msg) throws RemoteException {
message = msg;
public String say() throws RemoteException {
return message;
//HelloServer.java - located in c:\java
import java.rmi.*;
import java.rmi.Naming;
public class HelloServer{
public static void main (String[] argv) {
try {
Naming.rebind ("Hello", new Hello ("Hello, world!"));
System.out.println ("Hello Server is ready.");
} catch (Exception e) {
System.out.println ("Hello Server failed: " + e);
Then I open a command prompt and go to c:\java and type:
C:\java>javac HelloInterface.java
C:\java>javac Hello.java
C:\java>rmic Hello
C:\java>javac HelloServer.java
I then open a second command prompt and navigate to c:\registry to (to avoid being in the same directory as the stub files) and type:
C:\register>C:\j2sdk1.4.2_03\bin\rmiregistry
In the original command prompt, I then run HelloServer. I've tried running it a 100 different ways and always get the same error:
Hello Server failed: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: Hello_Stub
I've tried just running it as:
java HelloServer
java -classpath . HelloServer
C:\java>java -Djava.rmi.server.codebase=http://localhost -classpath . HelloServer
C:\java>java -Djava.security.policy=..\policy.all -Djava.rmi.server.codebase=http://localhost -classpath . HelloServer
Where policy.all is:
grant {
     permission java.security.AllPermission;
And pretty much just about every combination of the above that you can think of.

//HelloInterface.java - located in dir c:\java
import java.rmi.*;
public interface HelloInterface extends Remote {
public String say() throws RemoteException;
}//Hello.java - located in c:\java
import java.rmi.*;
import java.rmi.server.*;
public class Hello extends UnicastRemoteObject implements HelloInterface {
private String message;
public Hello (String msg) throws RemoteException {
    message = msg;
public String say() throws RemoteException {
    return message;
}//HelloServer.java - located in c:\java
import java.rmi.*;
import java.rmi.Naming;
public class HelloServer{
public static void main (String[] argv) {
    try {
      Naming.rebind ("Hello", new Hello ("Hello, world!"));
      System.out.println ("Hello Server is ready.");
    } catch (Exception e) {
      System.out.println ("Hello Server failed: " + e);
}I'm not sure what you are saying about the CLASSPATH. I thought rmiregistry had to be ran in a different directory than the stub files and that the stubs shouldn't be in the CLASSPATH of the terminal launching rmiregistry.
The HelloServer is being ran with the -classpath option set to "." and the stubs are in the same directory.

Help with a very simple password field

The following question can be observed, and manipulated with
the following:
Source:
http://www.ucsdkya.com/kyaonly.fla
SWF:
http://www.ucsdkya.com/kyaonly.swf
I am using embedded fonts for this flash file, and it seems
that no matter what, it converts my text field to an HTML one. The
trace feature made it quite obvious! What can I do to remedy this,
while keeping it the same looking the same. Is there a cheap
workaround? Thanks!

Well, it hit me almost a few seconds after (go figure) that I
could just copy and past the entire trace message as the required
string for entry. Easy solution.

Need help with pushview for multiple view files

Does anyone know how to create a pushview function or changeHandler function that would allow each item on a list when selected to change to a different view?
Example is that if like has 1, 2, 3 on it selecting 1 would take user to view1.mxml, selecting 2 would send user to view2.mxml, etc. I do not want to send all list items to the same view and just load different information.
Thanks!

I will check that out thanks!
In the mean time I did get the answer - see here: http://stackoverflow.com/questions/8936115/how-to-create-multiple-events-in-a-single-list- in-flex

Need help with a simple basketball game.

Hi im new here and I need help with making this simple basketball game.
Im trying to recreate this game from this video. Im not sure if he is using as2 or as3
Or if anyone could help me make a game like this or direct me to a link on how to do it It would be greatly appreciated.

If you couldn't tell whether it is AS2 or AS3, it is doubtful you can turn it from AS2 into AS3, at least not until you learn both languages. There is no tool made that does it for you.

Need help with CS4 transitions

Hi,
I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime, it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
Terry Lee Martin
Date: Sat, 22 Aug 2009 23:15:55 -0600
From: [email protected]
To: [email protected]
Subject: Need help with CS4 transitions
From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip. That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player. What's the point?
>

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Need Help with a very simple view transition scenario

Similar Messages

Maybe you are looking for