Need help with accessories for new 4th Generation Nano-speakers, etc
I just purchased the new 16GB 4th generation nano and I want accessories to play with it but am concerned with compatibility and charing issues. I am new to this so my questions may not make sense!
1. I am looking for speakers and the Logitech Anywhere Speakers have good reviews. Will I be able to play my Nano with these and charge it? If not, what ones will that are reasonably priced?
2. What accessory can I use to play my nano in my car (older model) that will also charge it? Or are there no accessories for this as of yet.
3. If I want to plug it into a stereo, I only need the mini/RCA cable converter, correct?
4. To plug into the wall, I need the USB adapter-but do I need a dock as well?
Thank you and sorry for such simple questions! This is my first iPod! :-D
2. If you have a cassette adaptor with the 3.5mm audio plug and want to also charge your iPod. You can plug it into a Griffin AutoPilot.
http://www.griffintechnology.com/products/autopilot
For the car with no tape or aux you need an FM transmitter, if your in a city with a lot of stations you will get interferance (I was glad to dump mine when I got a new car). Most are 12 volt! The Griffin iTrip has 5 volt charge and works with the iPod Nano 4th Gen.
http://www.griffintechnology.com/products/itripautopilot
Griffin seems to be one of the few companies that switched to 5 volt charging some time ago.
3. A line out cable is something like this...
http://www.amazon.com/Cables-Go-35507-Connector-Cable/dp/B000JG3WBY/ref=sr111?ie=UTF8&s=electronics&qid=1221776257&sr=1-11
Better then using the headphone jack to hook up to a stereo.
4. For the dock a 3.5mm to RCA cable should be all you need to get line out to your stereo.
Similar Messages
-
I need help with my ipod touch 4th generation??
Okay I have an ipod touch 4th gen and it is permanently disabled and I put it in restore mode connect it to
the computer and close to the end of the recovery it just turns on and messes up the recovery. I've tried
everything I know to do to fix it and it won't work. Does anyone know how to fix this. Also it is dented on the
back, maybe something inside got messed up and is making it do this. i just need to know how to fix this.
Whether it be opening it up and replacing some parts or what.Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
I need an earphone lanyard for my 3rd generation nano. Have searched the internet and cannot find one. Can find one for the 1st generation nano. Does anyone know whether or not the lanyard for the 1st will also work on my 3rd? If not where I can purchase a 3rd generation lanyard? Thanks for everyones help!
Johnette48You aren't required to do so. You can choose not to use the speaker dock or you can return the Nano.
-
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Need Help With Download For Airport Express
Ok, computer dummy here needing help with airport express. We were given airport express last night from a friend who recently purchased a newer gadget. He told us we would need to come here to download the operating system. I see lots of links to updates but no links for someone like me who has never had anything like this on my computer before. Does anyone know what link I would need to use? We have a pc with windows XP. Thanks so much for your help!
Hello jesschambers. Welcome to the Apple Discussions!
The AirPort Express Base Station (AX) doesn't have an "operating system" per se, but it does have built-in firmware which pretty much is the same thing. In addition, in order to administer the AX, you will need the AirPort Admin Utility for your Windows PC.
Here are the links for the latest versions of both:
o AirPort Express Firmware Update 6.3 for Windows
o AirPort 4.2 for Windows -
Need help with pagination for book
I am working on a book and need help with the pagination. I was able to make the TOC and front matter show the numbers as Roman numerals, and the body of the text as Arabic numerals, but I can't figure out how to restart the numbering sequence for the body of the text. So the front matter is numbered i-xvi, and the text is 17-681. I need the text to start with the number 1. Each subsequent chapter is a section break as well, if that makes a difference.
Many thanks,
JClick on the page that shall start on number one. Open Inspector palette > Layout inspector (2nd tab) >
Section > Start at: > 1 -
Need help with coding for HTML5 Video with Flash fallback
Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 video with Flash fallback. Not sure if the coding is correct. Do I need anything else Javascipt etc?
The reason you see a blank page is because it's trying to load the file that is pretty humungous and there is no preloader. So, you see a white screen till it complets loading.
Also, the reason why its loading a SWF file and not any of HTML5 type video is because your doctype declaration is XHTML1.0 and not HTML5.
Change the 1st line in your .html file from:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
to:
<!DOCTYPE html>
Then see if your HTML5 video types load with <video> tag. -
Need help with assignment for class. its for my high school project :(
i really need help, my problem is that with my code i cannot get the "previous", "done" and "next" buttons to work.they cannot seem to find the items from each other. so could someone look at those buttons in the code and tell me how to fix please? the code is as follows:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class GradeCalculator extends JFrame {
private JTextField gradeA = new JTextField(3);
private JTextField gradeB = new JTextField(3);
private JTextField gradeC = new JTextField(3);
private JTextField gradeD = new JTextField(3);
private JTextField gradeE = new JTextField(3);
private JTextField studentsName = new JTextField(15);
private JTextField assignmentOne = new JTextField(5);
private JTextField assignmentTwo = new JTextField(5);
private JTextField assignmentThree = new JTextField(5);
private JTextField examOne = new JTextField(5);
private JTextField examTwo = new JTextField(5);
private JTextArea textOutput;
private JPanel buttonJPanel;
public GradeCalculator(){
JMenu fileMenu = new JMenu("File");
JMenuItem aboutItem = new JMenuItem( "About" );
fileMenu.add( aboutItem );
aboutItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
JOptionPane.showMessageDialog( GradeCalculator.this,
"Grade Calculator Version 1.00. \nMade by Carlson Smith.\nSchool: Pre-University\nSubject: Cape Computer Science.",
"About", JOptionPane.PLAIN_MESSAGE );
JMenuItem exitItem = new JMenuItem( "Exit" );
fileMenu.add( exitItem );
exitItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
System.exit( 0 );
JMenuBar bar = new JMenuBar();
setJMenuBar(bar);
bar.add(fileMenu);
JTabbedPane tabbedPane = new JTabbedPane();
buttonJPanel = new JPanel();
buttonJPanel.setLayout(new GridLayout(1,2));
JButton ok = new JButton("OK");
ok.addActionListener(new OkBtnListener());
JButton edit = new JButton("EDIT");
edit.addActionListener(new EditBtnListener());
/**JButton previous = new JButton("PREVIOUS");
previous.addActionListener(new PreviousBtnListener());
JButton done = new JButton("DONE");
done.addActionListener(new DoneBtnListener());
JButton next = new JButton("NEXT");
next.addActionListener(new NextBtnListener());
JPanel contentPane = new JPanel();
contentPane.setLayout(new FlowLayout());
contentPane.add(new JLabel("Grade A")/**,BorderLayout.NORTH*/);
contentPane.add(gradeA/**,BorderLayout.NORTH*/);
contentPane.add(new JLabel("Grade B")/**,BorderLayout.WEST*/);
contentPane.add(gradeB/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade C")/**,BorderLayout.WEST*/);
contentPane.add(gradeC/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade D")/**,BorderLayout.WEST*/);
contentPane.add(gradeD/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade E")/**,BorderLayout.WEST*/);
contentPane.add(gradeE/**,BorderLayout.WEST*/);
tabbedPane.addTab("Grade Entry Tab", null, contentPane, "Grade Tab");
//contentPane.add(ok,BorderLayout.WEST);
//contentPane.add(edit,BorderLayout.WEST);
buttonJPanel.add(ok);
buttonJPanel.add(edit);
contentPane.add(buttonJPanel, BorderLayout.WEST);
JPanel content = new JPanel();
content.setLayout(new FlowLayout());
content.add(new JLabel("Student's Name")/**,BorderLayout.EAST*/);
content.add(studentsName/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 1 score:")/**,BorderLayout.EAST*/);
content.add(assignmentOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 2 score:")/**,BorderLayout.EAST*/);
content.add(assignmentTwo/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 3 score:")/**,BorderLayout.EAST*/);
content.add(assignmentThree/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 1 score:")/**,BorderLayout.EAST*/);
content.add(examOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 2 score:")/**,BorderLayout.EAST*/);
content.add(examTwo/**,BorderLayout.EAST*/);
//content.add(previous,BorderLayout.EAST);
//content.add(done,BorderLayout.EAST);
//content.add(next,BorderLayout.EAST);
Box box = Box.createVerticalBox();
String output = "test";
String outputTwo = output;
textOutput = new JTextArea(outputTwo,10,30);
box.add(new JScrollPane(textOutput));
textOutput.setEditable(false);
content.add(box,BorderLayout.SOUTH);
tabbedPane.addTab("Calculator Tab", null, content, "Calculation & Output Tab");
setContentPane(tabbedPane);
pack();
setTitle("Grade Calculator");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
class OkBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String gradeAA = gradeA.getText();
double gradA = Double.parseDouble(gradeAA);
gradeA.setText(" "+gradA);
String gradeBB = gradeB.getText();
double gradB = Double.parseDouble(gradeBB);
gradeB.setText(" "+gradB);
String gradeCC = gradeC.getText();
double gradC = Double.parseDouble(gradeCC);
gradeC.setText(" "+gradC);
String gradeDD = gradeD.getText();
double gradD = Double.parseDouble(gradeDD);
gradeD.setText(" "+gradD);
String gradeEE = gradeE.getText();
double gradE = Double.parseDouble(gradeEE);
gradeE.setText(" "+gradE);
gradeA.setEditable(false);
gradeB.setEditable(false);
gradeC.setEditable(false);
gradeD.setEditable(false);
gradeE.setEditable(false);
class EditBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
gradeA.setEditable(true);
gradeB.setEditable(true);
gradeC.setEditable(true);
gradeD.setEditable(true);
gradeE.setEditable(true);
/**class PreviousBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
if (i <= 0){
i = 0;
}else if(i > 0){
i = i-1;
class DoneBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
output = "Results \n";
output+= studentName[i]+" Assignment Average = "+averageO[i]+" Exam Average = "+averageT[i]+" Overall average = ";
output+= tAverage[i]+" Letter Grade = "+letterGrade;
class NextBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String [] studentName = new String [40];
double [] assignOne = new double [40];
double [] assignTwo = new double [40];
double [] assignThree = new double [40];
double [] gradeOne = new double [40];
double [] gradeTwo = new double [40];
double [] averageO = new double [40];
double [] averageT = new double [40];
double [] tAverage = new double [40];
char [] letterGrade = new char [40];
double max = 0;
double min = 100;
int i = 0;
while(i < studentName.length){
studentName[i] = studentsName.getText();
studentsName.setText(studentName[i]);
String aOne = assignmentOne.getText();
assignOne[i] = Double.parseDouble(aOne);
assignmentOne.setText(assignOne[i]);
String aTwo = assignmentTwo.getText();
assignTwo[i] = Double.parseDouble(aTwo);
assignmentTwo.setText(assignTwo[i]);
String aThree = assignmentThree.getText();
assignThree[i] = Double.parseDouble(aThree);
assignmentThree.setText(assignThree[i]);
String gOne = examOne.getText();
gradeOne[i] = Double.parseDouble(gOne);
examOne.setText(gradeOne[i]);
String gTwo = examTwo.getText();
gradeTwo = Double.parseDouble(gTwo);
examTwo.setText(gradeTwo[i]);
averageO[i] = (assignOne[i]+assignTwo[i]+assignThree[i])/3;
averageT[i] = (gradeOne[i]+gradeTwo[i])/2;
tAverage[i] = (averageO[i]+averageT[i])/2;
if (tAverage[i] >= gradeA){
letterGrade[i] = 'A';
}else if(tAverage[i] >= gradeB){
letterGrade[i] = 'B';
}else if(tAverage[i] >= gradeC){
letterGrade[i] = 'C';
}else if(tAverage[i] >= gradeD){
letterGrade[i] = 'D';
}else if(tAverage[i] <= gradeE){
letterGrade[i] = 'E';
public static void main(String[]args){
GradeCalculator calWindow = new GradeCalculator();
calWindow.setVisible(true);i have to apologize to jittei for the misunderstand i do not know which defination of terms is for which line of code but i know what they do, to solve the problem i have actually made another class in the workspace file called students and now all the bottons work, all i have to do now is properly arrange and put in some additional lines of code and it will be completed. teacher gave me the idea of putting in a new class to help in calling codes from other subclasses in the main program. ah well guess non of you could think of that thanks for the help-ish and hope yall will atleast try to be nice to new people that come in the room. the new coding is:
of course all the commented out lines are not being used in the program anymore but just there till i have the program working with everything in it runs and performs the actions required now though ^_^
*Group CAPE Computer Science 2007/8
*GradeCalculator.java
*@author Carlson Smith
*@version 3.01 07/02/2008
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class GradeCalculator extends JFrame {
private JTextField gradeA = new JTextField(3);
private JTextField gradeB = new JTextField(3);
private JTextField gradeC = new JTextField(3);
private JTextField gradeD = new JTextField(3);
private JTextField gradeE = new JTextField(3);
private JTextField studentsName = new JTextField(15);
private JTextField assignmentOne = new JTextField(5);
private JTextField assignmentTwo = new JTextField(5);
private JTextField assignmentThree = new JTextField(5);
private JTextField examOne = new JTextField(5);
private JTextField examTwo = new JTextField(5);
private JTextArea textOutput;
private JPanel buttonJPanel;
private JPanel buttonJPanelTwo;
private Student [] students = new Student[40];
private int current = 0;
private String output;
public GradeCalculator(){
JMenu fileMenu = new JMenu("File");
JMenuItem aboutItem = new JMenuItem( "About" );
for (int i=0;i<40;i++){
students[i] = new Student("");
fileMenu.add( aboutItem );
aboutItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
JOptionPane.showMessageDialog( GradeCalculator.this,
"Grade Calculator Version 1.00. \nMade by Carlson Smith.\nSchool: Pre-University\nSubject: Cape Computer Science.",
"About", JOptionPane.PLAIN_MESSAGE );
JMenuItem exitItem = new JMenuItem( "Exit" );
fileMenu.add( exitItem );
exitItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
System.exit( 0 );
JMenuBar bar = new JMenuBar();
setJMenuBar(bar);
bar.add(fileMenu);
JTabbedPane tabbedPane = new JTabbedPane();
buttonJPanel = new JPanel();
buttonJPanel.setLayout(new GridLayout(1,2));
JButton ok = new JButton("OK");
ok.addActionListener(new OkBtnListener());
JButton edit = new JButton("EDIT");
edit.addActionListener(new EditBtnListener());
buttonJPanelTwo = new JPanel();
buttonJPanelTwo.setLayout(new GridLayout(1,3));
JButton previous = new JButton("PREVIOUS");
previous.addActionListener(new PreviousBtnListener());
JButton done = new JButton("DONE");
done.addActionListener(new DoneBtnListener());
JButton next = new JButton("NEXT");
next.addActionListener(new NextBtnListener());
JPanel contentPane = new JPanel();
contentPane.setLayout(new FlowLayout());
contentPane.add(new JLabel("Grade A")/**,BorderLayout.NORTH*/);
contentPane.add(gradeA/**,BorderLayout.NORTH*/);
contentPane.add(new JLabel("Grade B")/**,BorderLayout.WEST*/);
contentPane.add(gradeB/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade C")/**,BorderLayout.WEST*/);
contentPane.add(gradeC/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade D")/**,BorderLayout.WEST*/);
contentPane.add(gradeD/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade E")/**,BorderLayout.WEST*/);
contentPane.add(gradeE/**,BorderLayout.WEST*/);
tabbedPane.addTab("Grade Entry Tab", null, contentPane, "Grade Tab");
//contentPane.add(ok,BorderLayout.WEST);
//contentPane.add(edit,BorderLayout.WEST);
buttonJPanel.add(ok);
buttonJPanel.add(edit);
contentPane.add(buttonJPanel, BorderLayout.WEST);
JPanel content = new JPanel();
content.setLayout(new FlowLayout());
content.add(new JLabel("Student's Name")/**,BorderLayout.EAST*/);
content.add(studentsName/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 1 score:")/**,BorderLayout.EAST*/);
content.add(assignmentOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 2 score:")/**,BorderLayout.EAST*/);
content.add(assignmentTwo/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 3 score:")/**,BorderLayout.EAST*/);
content.add(assignmentThree/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 1 score:")/**,BorderLayout.EAST*/);
content.add(examOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 2 score:")/**,BorderLayout.EAST*/);
content.add(examTwo/**,BorderLayout.EAST*/);
//content.add(previous,BorderLayout.EAST);
//content.add(done,BorderLayout.EAST);
//content.add(next,BorderLayout.EAST);
buttonJPanelTwo.add(previous);
buttonJPanelTwo.add(done);
buttonJPanelTwo.add(next);
content.add(buttonJPanelTwo, BorderLayout.EAST);
Box box = Box.createVerticalBox();
//String outputTwo = output;
//textOutput.setText(output);
textOutput = new JTextArea(output,10,30);
box.add(new JScrollPane(textOutput));
//textOutput.setEditable(true);
content.add(box,BorderLayout.SOUTH);
tabbedPane.addTab("Calculator Tab", null, content, "Calculation & Output Tab");
setContentPane(tabbedPane);
pack();
setTitle("Grade Calculator");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
class OkBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String gradeAA = gradeA.getText();
double gradA = Double.parseDouble(gradeAA);
gradeA.setText(" "+gradA);
String gradeBB = gradeB.getText();
double gradB = Double.parseDouble(gradeBB);
gradeB.setText(" "+gradB);
String gradeCC = gradeC.getText();
double gradC = Double.parseDouble(gradeCC);
gradeC.setText(" "+gradC);
String gradeDD = gradeD.getText();
double gradD = Double.parseDouble(gradeDD);
gradeD.setText(" "+gradD);
String gradeEE = gradeE.getText();
double gradE = Double.parseDouble(gradeEE);
gradeE.setText(" "+gradE);
gradeA.setEditable(false);
gradeB.setEditable(false);
gradeC.setEditable(false);
gradeD.setEditable(false);
gradeE.setEditable(false);
class EditBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
gradeA.setEditable(true);
gradeB.setEditable(true);
gradeC.setEditable(true);
gradeD.setEditable(true);
gradeE.setEditable(true);
class PreviousBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
Student currentStudent = students[current];
currentStudent.setStudentName(studentsName.getText());
currentStudent.setAssignOne(Double.parseDouble(assignmentOne.getText()));
currentStudent.setAssignTwo(Double.parseDouble(assignmentTwo.getText()));
currentStudent.setAssignThree(Double.parseDouble(assignmentThree.getText()));
currentStudent.setExamOneGrade(Double.parseDouble(examOne.getText()));
currentStudent.setExamTwoGrade(Double.parseDouble(examTwo.getText()));
currentStudent = students[current];
if (current <= 0){
current = 0;
}else if(current > 0){
current = current-1;
refresh();
System.out.println(current);
class DoneBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
Student currentStudent = students[current];
//output = "Result \n";
output = currentStudent.getStudentName()+". Assignment Average = "+currentStudent.getAverage()+". Exam Average = "+currentStudent.getExamAverage()+". Overall average = ";
output+= currentStudent.getTotalAverage()/**+" Letter Grade = "+letterGrade[current]*/;
textOutput.setText(output);
System.out.println(output);
currentStudent = students[current];
class NextBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
// String [] studentName = new String [40];
// double [] assignOne = new double [40];
// double [] assignTwo = new double [40];
// double [] assignThree = new double [40];
// double [] gradeOne = new double [40];
// double [] gradeTwo = new double [40];
// double [] averageO = new double [40];
// double [] averageT = new double [40];
// double [] tAverage = new double [40];
// char [] letterGrade = new char [40];
//double max = 0;
//double min = 100;
Student currentStudent = students[current];
currentStudent.setStudentName(studentsName.getText());
currentStudent.setAssignOne(Double.parseDouble(assignmentOne.getText()));
currentStudent.setAssignTwo(Double.parseDouble(assignmentTwo.getText()));
currentStudent.setAssignThree(Double.parseDouble(assignmentThree.getText()));
currentStudent.setExamOneGrade(Double.parseDouble(examOne.getText()));
currentStudent.setExamTwoGrade(Double.parseDouble(examTwo.getText()));
// currentStudent = students[current];
current++;
refresh();
/** while(i < studentName.length){
String aOne = assignmentOne.getText();
assignOne[i] = Double.parseDouble(aOne);
assignmentOne.setText(" "+assignOne);
String aTwo = assignmentTwo.getText();
assignTwo[i] = Double.parseDouble(aTwo);
assignmentTwo.setText(" "+assignTwo[i]);
String aThree = assignmentThree.getText();
assignThree[i] = Double.parseDouble(aThree);
assignmentThree.setText(" "+assignThree[i]);
String gOne = examOne.getText();
gradeOne[i] = Double.parseDouble(gOne);
examOne.setText(" "+gradeOne[i]);
String gTwo = examTwo.getText();
gradeTwo[i] = Double.parseDouble(gTwo);
examTwo.setText(" "+gradeTwo[i]);
averageO[i] = (assignOne[i]+assignTwo[i]+assignThree[i])/3;
averageT[i] = (gradeOne[i]+gradeTwo[i])/2;
tAverage[i] = (averageO[i]+averageT[i])/2;
if (tAverage[i] >= Double.parseDouble(gradeA.getText())){
letterGrade[i] = 'A';
}else if(tAverage[i] >= Double.parseDouble(gradeB.getText())){
letterGrade[i] = 'B';
}else if(tAverage[i] >= Double.parseDouble(gradeC.getText())){
letterGrade[i] = 'C';
}else if(tAverage[i] >= Double.parseDouble(gradeD.getText())){
letterGrade[i] = 'D';
}else if(tAverage[i] <= Double.parseDouble(gradeE.getText())){
letterGrade[i] = 'E';
public void refresh(){
Student currentStudent = students[current];
studentsName.setText(currentStudent.getStudentName());
assignmentOne.setText(currentStudent.getAssignOne()+"");
assignmentTwo.setText(currentStudent.getAssignTwo()+"");
assignmentThree.setText(currentStudent.getAssignThree()+"");
examOne.setText(currentStudent.getExamOneGrade()+"");
examTwo.setText(currentStudent.getExamTwoGrade()+"");
public static void main(String[]args){
GradeCalculator calWindow = new GradeCalculator();
calWindow.setVisible(true);
Second class implemented./**
*Group CAPE Computer Science 2007/8
*Student.java
*@author Carlson Smith
*@version 3.01 07/02/2008
public class Student {
private String studentName;
private double assignOne;
private double assignTwo;
private double assignThree;
private double examOneGrade;
private double examTwoGrade;
public Student(String sName){
studentName = sName;
public String getStudentName(){
return studentName;
public double getAssignOne(){
return assignOne;
public double getAssignTwo(){
return assignTwo;
public double getAssignThree(){
return assignThree;
public double getExamOneGrade(){
return examOneGrade;
public double getExamTwoGrade(){
return examTwoGrade;
public void setStudentName(String sName){
studentName = sName;
public void setAssignOne(double assignOne){
this.assignOne = assignOne;
public void setAssignTwo(double assignTwo){
this.assignTwo = assignTwo;
public void setAssignThree(double assignThree){
this.assignThree = assignThree;
public void setExamOneGrade(double examOneGrade){
this.examOneGrade = examOneGrade;
public void setExamTwoGrade(double examTwoGrade){
this.examTwoGrade = examTwoGrade;
public double getAverage(){
return (assignOne + assignTwo + assignThree)/3;
public double getExamAverage(){
return (examOneGrade + examTwoGrade)/2;
public double getTotalAverage(){
return (getAverage() + getExamAverage())/2;
this thread can be closed now. l8rz :P
Edited by: Jacal on Feb 10, 2008 7:28 AM -
Need help with LikeFilter for querying the keyset instead of value
Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM -
I need help fixing my iPod Touch 4th Generation myself
I have an iPod Touch 4th Generation and the home button isn't working i think its stuck problem is my warranty expired and i have no money to fix it so i need help fixing it myself again my warranty expired and i have no money to fix it so HELP PLEASE
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I need help with my for loop in this array
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
import javax.swing.JOptionPane;
public class Runner
public static void main (String[] args)
String timeStr;
int time, again, optiStr;
Inbound[] in = new Inbound[25];
in[0]=new Inbound ("",0,"On Time num0");
in[1]=new Inbound ("",2,"On Time num1");
in[2]=new Inbound ("",3,"Delayed num2");
in[3]=new Inbound ("",4,"On Time");
in[4]=new Inbound ("",5,"On Time");
in[5]=new Inbound ("",6,"Canceled");
in[6]=new Inbound ("",1,"Canceled num6");
in[7]=new Inbound ("",8,"On Time");
in[8]=new Inbound ("",9,"Delayed");
in[9]=new Inbound ("",10,"On Time");
in[10]=new Inbound ("",11,"Delayed");
in[11]=new Inbound ("",12,"On Time");
in[12]=new Inbound ("",13,"Delayed");
in[13]=new Inbound ("",14,"On Time");
in[14]=new Inbound ("",15,"On Time");
in[15]=new Inbound ("",16,"On Time");
in[16]=new Inbound ("",17,"Canceled");
in[17]=new Inbound ("",18,"On Time");
in[18]=new Inbound ("",19,"On Time");
in[19]=new Inbound ("",20,"Canceled");
in[20]=new Inbound ("",21,"On Time");
in[21]=new Inbound ("",22,"Delayed");
in[22]=new Inbound ("",23,"On Time");
in[23]=new Inbound ("",24,"Cancled");
in[24]=new Inbound ("",7,"On Time num24");
do{
timeStr = JOptionPane.showInputDialog ("In military time, what hour do you want?");
time = Integer.parseInt(timeStr);
if (time<=0 || time>24)
JOptionPane.showMessageDialog (null, "Error");
optiStr = JOptionPane.showConfirmDialog (null, "If you want Incoming flights click Yes, but if not click No");
if (optiStr==JOptionPane.YES_OPTION)
//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
// else JOptionPane.showMessageDialog (null, "else");
}//temp return else if failed to find time asked for
// else
// if (optiStr==JOptionPane.CANCEL_OPTION)
// JOptionPane.showMessageDialog(null,"Canceled");
// else
// {Outbound.run();
// JOptionPane.showMessageDialog (null, "outbound");}//temp
again=JOptionPane.showConfirmDialog(null, "Try again?");
while (again==JOptionPane.YES_OPTION);
}any help would be greatly appriciated.rumble14 wrote:
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
>//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
Inbound.getTime() is a static method of your Inbound class, that always returns the same value, I presume? As opposed to each of the 25 members of your array in, which have individual values?
Edited by: darb on Mar 26, 2008 11:12 AM -
Need help with animation, for my XAML game
Hello friends,
I need help in creating animation for my snake and ladder game(C#,XAML). I have completed the game logic, but can't understand how to animate my UI.
1. I want to animate 6 dice images so that when the player clicks on the Roll Dice Button a shuffle animation will play, and while the animation is playing the user can't click any thing.
2. I want the player disc to move one step at a time (animation) on the game board.
Please help me I am new to animation. Kindly give a replyHello,
I would recommend using
Storyboards and / or the
XAML animation library.
Other resources:
Storyboarded animations (XAML)
XAML animation library sample
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/ -
I need help with searching for an image inside another image
I need to write a program that checks for a specific image (a jpg) inside another, larger, image (a jpg). If so, it returns a value of true. Can anyone help me?
Winner takes all. First person to solve this gets 10 dukes.
Please help.Hi,
I would use a full screen image Sequence made with png for transparency and put your article behind. no auto play, stop at first and last image. and information for swipe to display article. -
I need help with my Ipod touch 4th restoring to factory settings
I have posted several posting because I need help but somehow everybody seems to ignore the subject or they just don't want to go there. I wonder why.
Anyways, I'm in critical bind. I still have iTune 10.7 running on my iMac 10.6. However, when I try to synch my Ipod to my Mac I get a message that I need to restore my Ipod to factory settings.
The thing that I'd like to know if I restore to factory settings if I could select which verions iTune I could select. I have 10.7 installed and also have a copy in TM.
I don't want to use iTune V.11Ana
I appreciate your input, but you still haven't told me how to restore the iPod w/o getting V. 11. So far for what I read it says that if I choose to restore back to factory settings that it will install the latest version of iTune. Is there any way that I can overide this? According to you, it sounds like I could but still you haven't share with me how to do it
Illlaass
Here is the thing I have iTune 10 installed but when I tried to synch the iPod is when I get the message that I have to restore it to the factory setting. I'm willing to go along with it provided that I can select iTune 10.7. I have it installed in my backups. -
Urgent-Need help with code for Master data enhancement
hi Experts,
I have appended YMFRGR field(Table MARC) to 0MAT_PLANT_ATTR datasource.
The key fields in the MARC table are MATNR and WERKS.Can anybody help with the user exit to populate this field,as am pretty new to ABAP.
Thanks in advanceHi,
go through this link which has the similar problem:
https://forums.sdn.sap.com/click.jspa?searchID=1331543&messageID=2794783
hope it helps.
Thanks,
Amith
Maybe you are looking for
-
How to Delete the Junk data in Transformation Routines
Hi, I had scenario like infoobject for 0CUSTOMER master data is bringing the values C123456_RECEIPTS. C12345_RECEIPTS. So when i extract the data from R/3 for this 0CUSTOMER master data it is bringing the SOME JUNK DATA I would require delete the C12
-
Missing 3d tools in Photoshop CS6 extended
Hi everyone, I thought that I would seek help here before I endure the agony of Adobe technical help. I just installed the upgrade to CS6 Design and Web Premium yesterday. Received my email for the free upgrade yesterday morning and all went fine for
-
Late 2013 15 MBP Win 7 Bootcamp, user feedback?
Hey. Im considering getting a new 15 Macbook Pro, and need some serious feedback on Bootcamp. I currently have a mid 2010 MBP i5, 2.53 ghz 4 gb ram, running Win 7 64 bit, and have been experiencing alot of overheating and graphics kernel problems (sc
-
My charger broke so I bought a new one and a week later it died again what's happening
Please help my charger broke after 1 week and after buying a new one
-
RAC One Node: downtime after HW-outage?
Hi , RAC One Node seems to be a good alternative compared to a "regular" RAC. Since we don't have any experience with RAC One Node we are currently going through the available documentaion and try to get a picture of the advantages/disadvantages. One