Need help with adding video to itunes

i have an ipad 1 that i put 2 videos on to teach CPR. got a new ipad. not only will i tunes not transfer the video it will not let me add it to the library to put it onto the new ipad. and help would be appreciated

Is iTunes crashing when you try to add video or is it just not adding them? If it's crashing I found that selecting the video in a folder and then right clicking (PC) then selecting Open With, iTunes, then iTunes will start to play the video but also adds it to the Movies section. I've been having problems with iTunes crashing and found this to be the easiest way around it, obviously not the best choice if you have lots of videos.

Similar Messages

I need help with my videos now that I downloaded the ios6. It won't play.

I need help with my videos. I downloaded the ios6 and now they won't play. Does anyone know how to fix?

Wanted to let everyone know that after looking at other discussions I did a hard reboot and it is now working. Love this site!

Need help with adding emoji to my hubby's phone don't see it when I click on the keyboard tab

I need help with adding emoji to my hubby's iPhone when I go to settings then the keyboard tab it's not there

I did that bad it's not there and doesn't give me to option to click on it

I need help with the videos

Yea for the videos, I want to put some Red vs Blue videos on there. And so dar the only way that I see how to put them on there is to buy quicktime 7 pro. Cause it says you have to export them into Itunes. Is there any other way to do it because when I try to update my ipod with the Red vs Blue videos on my library list. It says," Some of the videos in your iTunes library, including the video [video name here], were not copied to the iPod [name of your ipod here] because they cannot be played on this iPod" It confused me when I have the fifth generation iPod.

Voden,
A quick search would have answered your question, as it gets asked about a dozen times a day.
Anyway, the iPod only supports 2 codecs for video, MPEG4 and H.264. On top of that, it needs to conform to the pixel dimensions and bitrate that the iPod will support as well.
Since you're on Windows, you can use Videora iPod Convertor to convert the videos to the correct format.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: Videora iPod Convertor Guide
If you have questions: Videora iPod Convertor Frequently Asked Questions
If you have more questions, post them here: Videora iPod Convertor Forum
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.

Please I really need help with this video problem.

Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
          preloaderBar.visible = true;
          preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
          var perc:Number = e.bytesLoaded / e.bytesTotal;
          preloaderBar.percent.text = Math.ceil(perc*100).toString();
          preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
          preloaderBar.percent.text = '';
          preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
          if (filme != "sets.swf")
                      filme = "sets.swf";
                      carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
          if (filme != "home.swf")
                      filme = "home.swf";
                      carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
          btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
          btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
          btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
          btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
          btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
          btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
          trace(stat.info.code);
meta.onMetaData = function(meta:Object)
          trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
            ns.resume();
            t.removeEventListener(TimerEvent.TIMER,timeHandler);
            t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank you

My first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/

Problem with adding Videos in itunes

Can someone please please help me!
Ever since i upgraded to the latest version of itunes I started encountering problems/difficulties in adding videos in itunes library. All the videos that I'm trying to upload are in the correct file format (mpeg4/mp4). I tried adding using Add File to Library, Add Folder to library and even Import..nothing happens..no prompt that its uploading. In the end can't add any video.
I tried doing this using my PC and my laptop and i still encounter the same problem so I can say that th problem is not on my computers.
Please help!
Ipod Video 30GB Windows XP

Hi,
This article: http://support.apple.com/kb/TS1718 provides general tips that may resolve the issue.
-Jason

Need help with ipod video/movies

need help have videos in itunes how do i get them to ipod?

Double post. Please see your other one.
http://discussions.apple.com/message.jspa?messageID=3504698#3504698

I need help with streaming video

I have 7 videos I've produced that I would like to
progressively stream from my web site. They're all approx 400 x 200
about 2 minutes long with sound. I have a scene set up with each
video in a separate keyframe so you can navigate from one to the
other in the same scene.
I can get the videos to play locally. When I upload the swf
and .flvs to my server, they won't play. One error message I get on
output states that "**Warning** The linkage identifier
'FLVPlayback' was already assigned to the symbol 'FLVPlayback', and
cannot be assigned to the symbol 'golden', since linkage
identifiers must be unique." What I did there is rename each video
in my library from FLVPlayback to a unique name so I can identify
it.
I get that output error message for each of the videos that
I'm trying to publish. It sounds like I have to change the
Identifier in each video, but I haven't figured out how to do that.
Any ideas or suggestions would be greatly appreciated!

Ah, I see what happened. Every time I import a QT into the
library, Flash creates a FLVPlayback component along with a .flv
file. I cleared all but one FLVPlayback component and reimported
the .flvs to stage and now I have streaming video on the website.
Thanks clbeech, that was really helpful!
One more issue. I've selected one of the prebuilt skins
(Clearexternalplayseekmute.swf) to control video, while it works
locally, I can't see it on the server. Do the skins need additional
code to work?

Need help with N93i Video sound/audio problem........

hi,
i really hope someone can help me out here...
after i have done with recording video clips and i replay the video,the phone speaker came out a very noisy sound (is like a bad Radio Frequencies noise)
why or how is this happen ???
how can i stop the noisy sound that came out from the phone speaker ?
Thank you in advance !

hi el_loco,
yes,the sound appear to be the same too when i play on the pc
the noisy sound came from the loudspeaker outlet,
i got a strong feeling that somethings is wrong with the build in microphones or maybe the loudspeaker ???Message Edited by nl3181 on 15-Jun-200709:23 PM

I've just bought an 80gb iPod and need help with music videos.....

...I've downloaded a music video which iTunes has put in my library under Music when I thought it would be under Movies. I can't move it to Movies, it won't let me. I can only transfer it to my iPod as a music file. How do get to watch it on my iPod?
Thanks
Andy

I suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one.

Need help with exporting videos to iPhone format

When I export a video from iTunes to my desktop so I can get the export menu pictured below, if I choose the iPhone option it then lets me choose where to export and when it begins the export it goes to a windows application (I run Parallels for Quickbooks). Not sure why it does this? When the movie is saved to my desktop and I pull up the info on it (see below) it shows the little Parallels icon in the top left but under kind it says it's an Apple MPEG-4 movie?
The reason behind all this is that I would like to send out several videos to iphone/ipad users and want to keep the file small. Also, this must be a useful option or don't see why apple would have on the menu. Just looking fro the best method to send videos to iphoon users, thanks! Running 10.9.1

Do you have iMovie isntalled on your MB or have yhou removed it?
iMovie has built-in profiles for exporting vidoes optimized for specific devices.
QuickTime has some powerful export features when you really want to dive into settings and tweaking, but I find myself using it less and less, going more and more in favor of iMovie's 1 click publishing.

Need help with adding images option

I was using the add images option a few weeks ago just fine.. using my tablet and uploading the images via usb. then all of the sudden it stopped working.
please help with this issue.
Danny

A few questions. What result are you experiencing? Did PS Touch crash? Have you tried to force quit-and restart PS Touch? -Guido

I need help with adding fire to an existing picture in elements 8

I'm a painting contractor and I'm trying to create a new picture for my buisness cards and tee shirts. What I want to do is put flames coming from a brush and work pot that I'm holding in my hands. I've looked everywhere on line, but I can't find exactly what I want. I'm hoping that someone in this forum will be able to help me. Thanks.

Okay, I have been playing with for a few days. Warning, this is going to be loooong. I do this differently in Photoshop but couldn't get it to work with the elements workset as it doesn't have the curves tool that Photoshop has so I had to find an alternate method to pump up the flames. Luckily, I ran into a video that used a method other than curves to get me on track. I assumed you want realistic flames...so I was pushing for how real could I make flames using paint and blend mode operations.
Edit: I should let you know that you can try to extract flames from other photos and composite them into your photo. First, need a good fire image. It works best if you can find a fire with a black background. Screen blend mode will drop out black. Try working with two copies of the image. Turn off the topmost copy of the flames. Leave the bottom flames in Normal blend mode. Mask or erase the outer edges of the flames with a soft brush so that only the interior of the flames are visible. Now, turn on the topmost version of the flames. Leave the topmost version of the intact...don't mask or erase anything. Change this topmost flame layer's blend mode to screen blend mode. If you see any problems with your flames, you can erase or mask any defects. You can duplicate the screen layer to brighten the effect. Use opacity to control the volume. This would be the easiest solution but you'll have to find some flames that trip your fancy. I haven't tried this out yet so can't say how much better or worse it would be than using a good set of flame brushes along with some blend mode tricks.
Below shows how close I can get using paint. I only used options available in PSE. I used layer masks that if you had PSE 9 would be native. Since you have PSE 8, you'll need to either download an install an add on that adds the basic layer mask function or use clipping masking.
Below is a link to a freeware set that includes layer masks. Install instructions are on that site.
http://www.cavesofice.org/~grant/Challenge/Tools/Files.html
If you want to go the clipping mask route, have a look at this tutorial:
http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm
Before and After the effect.
I would have posted sooner but had to find a workable solution to making the flames look realistic in Elements as I can’t use the curves tool as it isn’t native to Elements.
With the help of this YouTube video I came up with something…
http://www.youtube.com/watch?v=cOIBkWvHOqk&feature=related
I based this tutorial on the hue/sat numbers, blend modes, and blurs.
First, I downloaded a flame brush set. This set in specific:
http://luexo.deviantart.com/art/Scorching-Flames-Brushpack-92945924
The above set is really nicely done and has large high resolution brushes.
One thing I do not agree with in the video is the color used. White is hard to change in the Hue/Saturation dialog. Instead I use 50% gray as my paint color. This is easy to set…either use the 50% color swatch or open the Color Picker and set H to 0, S to 0, and B to 50...hex number is 808080.
Things to keep in mind include fire is gaseous, bright and the way it burns…it one direction, fire reflects and there is probably going to be some smoke.
In my example, I am going to set a lunch cake. Nice 4th of July theme. J
Let’s start my scorching the item that will be burned. In this case the lunch cake will be scorched.
Scorch the item…preparing to light it up.
1. Duplicate image and put image into Linear burn blend mode; opacity 100%. Add layer mask or erase everything but the item to be scorched…the lunch cake.
2. Duplicate layer you just made in step #1. Change the blend mode to Multiply 100%. Desaturate this layer. Image Adjustments<Hue/Saturation…move Master Saturation slider to -100. Take burn tool set to Range: Midtones; Exposure 35%; air brush on…and scorch the item. Make it kind of smudgy. You don’t want an even coat. Make it darker as you get closer to the flames.
Note: Here I’ve jumped ahead. I already know where my flames are going to be. Either visualize where you want your flames or jump ahead and laid down the basic paint and transform into the correct position. Turn off flame layer (s) when done. So step #3 if you do any repair work isn’t affected.
3. If you feel you need to do any clone repairs, create a composite image ctrl + shift + alt + e if on PC…cmd + shift + opt + e if on a Mac. Do the clone work on a blank layer over this. With clone tool selected, check the box in the options bar that says something like “All Layers”, “Use All Layers”, “Sample All Layers”…the box says one of those things beside it. I can’t recall which and not sure if it’s consistent between all versions of Elements. Anyway, Leave layer in Normal blend mode 100% and likewise leave tool in Normal blend mode…opacity to taste. Fix any defects on this layer. You can do the same thing with the healing brush if you need to do any healing. I find it best to heal to a separate layer and not mix and match the healing tool and clone stamp on the same layer.
4. Turn off or trash the Clone Stamp comp layer when finished with step #3.
Let’s Build a Fire…
5. Create a blank layer in the layers palette….Normal blend mode; 100% opacity. Make white your foreground color chip. Grab the paint brush tool…normal blend mode; 100% opacity. Paint one flame on your layer. I have used the 1220 sized flame near the bottom of the brush set I linked earlier. Use the transform command …Ctrl + t (PC) or Cmd + t (Mac)…to size and position the flame. I used also slightly warped the flame using transform warp. Since you don’t have that in Elements…slightly warp the flame in the liquefy dialog.
Note: The above flame is pretty much backlighting…you are done with it.
6. Change the color foreground color chip in your layers palette to 50% gray. Use the same brush tip you used in step #5. Size and position it so it closely matches the white flame in Step #5. Go to liquefy dialog and slightly warp it.
Note: The goal is for the flames in step #5 and step #6 to be very similar but not exact.
7.. Duplicate the 50% gray flame you made in step #6 twice. Turn off the top 50% gray flame for now.
Fire is Bright...
8. Now that video comes in that I linked.
(1) Blur the 50% gray flame with Gaussian blur. I used 6 pixels. Go to menu and click Enhance or is it Adjustments<Hue/Saturation…check the box that says “colorize”; change master sliders to Hue 42; Saturation 100; Lightness 0.
(2)Duplicate the flame you made above…step (1). Go to the menu bar and click Enhance or is it Adjustment<Hue/Saturation…change master sliders to Hue -43; saturation 0; Lightness 0. Change this layers blend mode to Color Dodge blend mode and merge down…Ctrl + e on PC; cmd + e on Mac.
Note: This layer will now say Normal blend mode; 100%.
(3)I duplicated the merged layer I now have from step (2). I changed the blend mode of this layer to Screen and set the opacity to 100%.
(4) I made a duplicate of the layer I have made in step (2)…the one that now says it’s in Normal blend mode; 100%… then blurred it with Gaussian blur. I used 46 pixels. I moved this layer down in my layers palette so that it rests beneath my other two colored flame layers. The white flame layer is directly below it. Leave this layer in Normal blend mode; 100% opacity.
9. Go back to 50% gray flame you made in step #6...visibility eye should be off. You should have two of these gray layers if not duplicate one so that you do have tow 50% gray flame layers. (These were not blurred.) These two layers need to be on the top of the stack. If they are not, move them up so that they are the top two layers. Turn on the visibility of the bottom 50% gray layer. Change the layer’s blend mode to Screen blend mode; opacity 100%. Grab the burn tool. Burn some of the flame base and randomly in the flame of the 50% gray. Press and hold in the alt key (PC) or the opt key (Mac) and dodge the tops of the flames and do some random dodge work.
10. Turn on the visibility for the top 50% gray layer. Leave this one alone…no dodge + burn. Set this layer to Screen blend mode; opacity 96%.
11. Add layer masks to white and color flame layers…not the gray ones. Paint away any unattractive color spill. Bright orange edges…bright white distractions where flame edges don’t align.
12. Make a composite layer of all layers up to date. Set this layer’s blend mode to multiply; opacity 47%. Add a layer mask and mask out everything but the flames. Tip: You can select the flames by ctrl + shift clicking on each flame layer thumbnail…the shift lets you add to a selection. On the Mac, cmd + shift click the layer thumbnails.
Flames Reflect…
13. Make a copy of one of your blurred color flames. Transform it so it rest over item that it should reflect on. In this case I have added a blurred flame onto my son’s eye. The flame is in Overlay blend mode; 33% opacity.
14 Several steps Eye enhancements to my son’s eye…omitted because it’s off topic
15. I used a gradient map with a fire like black/red/yellow/white gradient map set to Softlight blend mode; 17% to give my image a hint of a color cast. I masked it so only some skin, hair, and car areas have this slight color cast.
Where there’s fire there is going to be some smoke...
16. To make my smoke, I made a separate large document my photo size. I set my color chips to the default b/w. (Shortcut is D.) I went to menu bar and clicked Filter<Render<Clouds. Next I went back to my menu bar and clicked Filter<Render<Difference Clouds. I used Ctrl + f to repeat the Difference Cloud filter until I was happy with the effect…looking for swirled black lines…kind of like lightning. (If on a Mac, use Cmd + f to repeat a filter. I then used the transform command to enlarge the pattern I made. Be sure to scale it so that height and width both are enlarged equally. Next, go to the men bar and select<All ; Edit<Crop. You want to do to get rid of the excess. I think I transformed my patter to something like 200% which makes the file really big. You can do it on your image file but because of file size the transform will take a really long time. When happy copy/paste or drag/drop this pattern into your photo file.
17. Now blur pattern really good using Gaussian blur. Now, add a layer mask to your pattern layer. Click the layer mask in the layers palette to target it and run the the clouds and difference clouds on the mask just as you do on the pattern layer. Just those filters…no blur.
Basic smoke pattern final
18. Duplicate this layer w mask twice. You should have three smoke copies. Turn off all but the bottom pattern copy. Use the paint brush and paint black in mask to hide the smoke everywhere but where you want to keep it. Set this layer’s blend mode to Multiply blend mode; opacity 15%.
View of the inside one of the smoke layer masks
19. Turn on the visibility of the next smoke pattern. Again use a black paint to paint where you don’t want paint. (Make this variable as you want the smoke to be varying opacity.) Layer blend mode Multiply; opacity 15%.
20. Turn on the visibility of the next smoke pattern…top one in stack. Again use black to paint where you don’t want the smoke. Set this layer’s blend mode to Multiply blend mode; opacity 1%.
Fire is Gaseous...
21. Make a composite of all layers by pressing ctrl + shift + alt + e if on PC. Use Cmd + shift + opt + e if on a Mac. Blur your composite image. I used 3 pixels. Set the blend mode to Normal; opacity 64%. Add a layer mask and fill it with black paint to hide the blur effect. Use the paint brush with white paint in the layer mask to blur any sharp edges and base of flames. Remember flame is gaseous.
Above shows my layers for completed image. Notice the comp for clone layer is off. I did not need it after I did the clone to a blank layer to add some scorched cake around my son's fingers.

I need help with the videos on my ipod - blank screen.

Okay, I got a few videos from my friend's itunes and put them on my ipod and they worked. Then when I got home I realized that itunes doesn't have the capability of transferring files from the ipod to the computer because of legal reasons. Well, I downloaded a software that could do that and it worked. Now, when I plug in my ipod it tells me that it needs to be restored. I know how to fix that but I'm waiting a little while because it's a long process to put all my crap back on my ipod. But what happened that I don't know how to fix is now when I play my videos it is a black screen with no audio and the play icon is on for a few seconds before it kind of freezes and then sends me back to the menu. The weird thing is that it happens to all my videos, not just the new ones I put on there that I got from my friend's itunes. There were people who had a similar problem with this but their questions were not answered. If you know anything that can help please let me know.
-Paul

Here:
http://www.apple.com/ipod/specs.html
Video
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per sec., Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats

Need help with adding a Key flex field to a seeded OAF page

We have a seeded OAF page on which we already have Account Key Flex Field.
Properties of this flex field are:
The ApplShortName - SQLGL
Name - GL#
Type - Key
As per the client requirement, in the KFF screen, we have disabled the seeded structure for Accounting Flexfield and created a custom structure.
Our custom structure for the KFF is displayed correctly on the OAF page.
But now the requirement is to add a new KFF on the OAF page which is duplicate of the existing KFF, along with the existing KFF field; the structure and segments are same. Only difference being the display name of the existing KFF field is Account; the new one needs to be Tax structure.
Using personalization we added a new flex item and added the properties same as the existing KFF.
ApplShortName - SQLGL
Name - GL#
Type - Key
But the page is giving following error:
The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
We tried options like compiling the flexfield definition, but the error persists.
Any help in this regard is highly appreciated.
Regards,
Kiranmayi.

Hi,
Please check whether your key flex structure is frozen or not. If now please freeze it and re compile and try.
This may helps too
error while developing KFF in oaf
Thanks
Bharat
Edited by: Bharat on May 10, 2013 4:51 AM

Need help with adding video to itunes

Similar Messages

Maybe you are looking for