Need help with ADF Runtime 11.1.1.6 installation into WLS 10.3.6

Hello all!
I have JDeveloper 11.1.1.6 and a standalone WLS 10.3.6 (in seperate Middleware homes as advised). I need to install the ADF Runtime libraries into the WLS but I don't know how. I downloaded them from OTN, the zip file is called ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip, is this the right one?
When I start the installer I can only select the JDeveloper middleware homes in the dropdown (in the meantime I have 3 of those, sigh). When I enter the WLS-home manually it doesn't detect that it is a weblogic home, so I can only select Websphere in the next screen. After that I get stuck because it isn't Websphere either.
This is my setup:
C:\Oracle\WLS10.3.6\WeblogicServer is the middleware home I specified during the WLS-install. Inside it i see folders common, utils and wlserver
one level up I have a folder domains in which the domain was created.
What should I enter as my middleware home for this installation, or should I download a completely different zipfile? I am confused! I can't use Jdeveloper to install the libraries either, this is not supported.

That first link was really helpful, I now see what went wrong. I used the zip distribution of the WLS-installation, instead of the installer. Apparently that is completely different, I couldn't find a way to install the ADF-runtime libraries afterwards. Even when I added my new Middleware home to C:\bea\beahomelist manually it complained about my WLS not being equal or higher than 10.3.5, so it wasn't going to work anyway.
Time to download the big ugly slow installer for WLS 10.3.6 and start over I guess....
Edited by: Wendy Tromp on Jun 7, 2012 11:02 AM

Similar Messages

[SOLVED :)] Need help with adf table row selection

Hi,
In my application I am displaying results in a table. The DisplayRow property of table is set to Selected
There are Next and Back buttons which help user to view details associated to the next/previous rows.
I am using ADF 11g
When user clicks Next or Previous button, then the selection of the row should also gets updated
To achieve this i wrote below piece of code:
this.tblS.getSelectedRowKeys().clear();+
this.tblS.setRowIndex(count);+
RowKeySet rks = tblS.getSelectedRowKeys();+
rks.add(tblS.getRowKey());+
rks = tblS.getSelectedRowKeys();+
ISSUE:_
When i run application and click Next/Previous Button, all functionalities do take place properly, but a null pointer exception is also thrown._+
If i remove DisplayRow property of table from Selected to Default, every thing works good and no Exception is thrown_+
But as records in my table are going to be around 50-60 everytime, i need to set DisplayRow property of table to Selected.
Is there any way to achieve this? Solve this problem?
Some more details:_
I am using a POJO class to create DataController. This DataController is having a view Object which is used to create results table.
I have defined Primary key for my POJO Data Controller.
Here is code of xml file:*
+<?xml version="1.0" encoding="UTF-8" ?>+
+<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="11.1.1.52.5"+
id="ProductListBean" Package="xxadf.mm.resources"
BeanClass="xxadf.mm.resources.ProductListBean"
isJavaBased="true">
+<Attribute Name="Product" Type="java.lang.String" PrimaryKey="true"/>+
+<Attribute Name="Stock" Type="java.lang.String"/>+
+<Attribute Name="Rate" Type="java.lang.String"/>+
+<Attribute Name="Accuracy" Type="java.lang.String"/>+
+<Attribute Name="Details" Type="java.lang.String"/>+
+<ConstructorMethod IsCollection="true"+
Type="xxadf.mm.resources.ProductListBean"
BeanClass="xxadf.mm.resources.ProductListBean"
id="ProductListBean"/>
+</JavaBean>+
Error Log:*
SEVERE: Server Exception during PPR, #1
java.lang.NullPointerException
at oracle.adfinternal.view.faces.model.binding.RowDataManager.getRowIndex(RowDataManager.java:200)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.getRowIndex(FacesCtrlHierBinding.java:506)
at org.apache.myfaces.trinidad.component.UIXIterator._fixupFirst(UIXIterator.java:414)
at org.apache.myfaces.trinidad.component.UIXIterator.__encodeBegin(UIXIterator.java:392)
at org.apache.myfaces.trinidad.component.UIXTable.__encodeBegin(UIXTable.java:168)
at org.apache.myfaces.trinidad.component.UIXCollection.encodeBegin(UIXCollection.java:517)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeHorizontalChild(PanelGroupLayoutRenderer.java:458)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$100(PanelGroupLayoutRenderer.java:30)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:618)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:560)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:317)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:392)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$300(PanelGroupLayoutRenderer.java:30)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:641)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:560)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:317)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer.access$100(ShowDetailItemRenderer.java:31)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer$ChildEncoderCallback.processComponent(ShowDetailItemRenderer.java:491)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer$ChildEncoderCallback.processComponent(ShowDetailItemRenderer.java:464)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer._encodeChildren(ShowDetailItemRenderer.java:406)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer.encodeAll(ShowDetailItemRenderer.java:114)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:1523)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer.access$500(PanelTabbedRenderer.java:38)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer$BodyEncoderCallback.processComponent(PanelTabbedRenderer.java:969)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer$BodyEncoderCallback.processComponent(PanelTabbedRenderer.java:920)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer._renderTabBody(PanelTabbedRenderer.java:519)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer.encodeAll(PanelTabbedRenderer.java:233)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:221)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:820)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1494)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:771)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:685)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:261)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:193)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please Help I have been struggling with this issue for long.
Thanks and Regards
Manav Ratra
Edited by: user11255144 on Feb 8, 2010 5:33 AM

Hi Arun,
Thanks for replying.
Actually in my application there is one result table and a section that is displaying complete details of the product selectd in result table.
The next/previous buttons are not binded with result table.
What I am doing is, I am puuliing data from VO and displaying it on form, whenever any of these buttons is clicked.
As soon as these buttons are clicked data is coming up, but selection state of table is not getting updated.
So to update selection state i wrote piece of code described in my previous post.
Everything works fine if displayRow property of table is not set to selected.
If i set display row property of table to selected, then i get a null pointer exception with message log defined in previous post.
Although NPE is thrown, yet all data is properly fetched and table selection is also updated. But am not able to get how this NPE is coming and hpw to fix it .
(I need to keep displayRow = selected, for all other cases NPE is not thrown)
Please help..
Thanks and Regards
Manav Ratra

Need help with ADF and Business Intelligence BI integration

Hi All,
I am using JDev 11.1.1.6.0.
I am trying to integrate BI Dashboard into my ADF application.
The BI Dashboard that I am integrating includes prompts, and using the prompt value, the table inside the dashboard is filtered. So, when I drag and drop the dashboard into the page, it asks me the the prompt value with Dashboard Prompts dialog.
The problem is that even though I entered value into the prompt value (Value 1, Value 2) in the dialog, the table is not filtered. It's like it is not using the value that I entered.
I also tried to bind the prompt value (in the dialog box) with the attribute binding in my page. But it's also not working.
Could you please help me with this issue? Thanks.
Best Regards,
cmoster

I have not done this myself , but thought that some tips here might help you -
http://docs.tpu.ru/docs/oracle/en/fmw/11.1.1.6.0/bi.1111/e10545/embedding_adf.htm#autoId15

Urgent!!! Need help with ADF 11g app deployment

Hi,
My application is designed using ADF 11g and am using adfc-config.xml for page flow.
Through Jdev 11g integrated WLS server the application is running smoothly.
But when i deployed application using EAR file on WLS 11g server and accessed the appliction, the page flow didnt worked.
That is i tried opening login page of my application, it opened. Then i provided login credentials , they were successfully validated.
But after that the application home page did not apperaed and application stuck at Login page only. The page flow didnt worked.
Please help on this, its urgent...
Thanks n Regards
Manav Ratra

Thanks Timo/Arun,
The problem was same as figured by you. :)
The application is running smoothly in IE7 but in Mozilla 3.0.15 it is not running.
There it is throwing error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Any pointers to this ...
Thanks n Regards
Manav Ratra
Edited by: user11255144 on Nov 16, 2009 11:22 PM

Need HELP with JAVA RUNTIME Environment

Hi,
I just download J2EE, J2SE, and Ant from sun site. I am having problem to compile java program. Here what I did
1)     Download J2EE at c:\j2sdkee1.3.1 directory
2)     J2SE at c:\Program Files\Java\j2re1.4.1_01 dir
3)     Ant at ant c:\Jakarta_ant-1.3 dir
My operating system is windows 2000. Therefore, I set up environment variables from system ->Advance ->Environment ->Variables ->System variables ->New
Variable = ANT_HOME
Value = c:\ant\Jakarta_ant-1.3
Variable = J2EE_HOME
Value = C:\j2sdkee1.3.1
Variable = JAVA_HOME
Value = c:\Program Files\java\j2re1.4.1_01
Variable = CLASSPATH
Value = c:\j2sdk221.3.1\lib\j2eetools.jar
Edit
Variable = Path
Value =
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\MSSQL7\BINN;%JAVA_HOME%\bin;%J2EE_HOME%\bin;%ANT_HOME%\bin
I restart my machine and try to execute the following command from command Prompt in c:\ dir
C:\> j2ee ?verbose
The following message pop up
?C:\Program? is not recognized as an internal or external command, operable program or batch file.
I would appreciate if someone explain me what I did wrong in set up so this test program is not working.
Do I need to run j2ee ?verbose some other directory? Which directory should I compile my java file?
Did I set up my environment variable correctly or I need to do something else?
Please help me out.
Thanks a lot.
Sam

try to set JAVA_HOME environment variable to
C:\PROGRA~1\java\J2RE14~1.1_0
when you dir name contains space symbols, you should enclose it in commas or use a short form
"C:\Program Files\java\j2re1.4.1_01"
is equals to
C:\PROGRA~1\java\J2RE14~1.1_0

Need help with Java Runtime Environment pop-up for Yosemite OS X.

Java Runtime Environment is disabling my Safari but does not effect Firefox. After installing the 8.40 update of Java and jumping through all the hoops I still get the JRE needs to be installed pop-up message.

Most likely, you have a web plugin that depends on the Java runtime distributed by Apple, such as the Facebook video calling plugin or the "NexDef" plugin for watching baseball streams. If you no longer need the plugin, remove it, including its automatic update mechanism (if any) according to the developer's instructions. Otherwise, install Java.

Need help with File system creation fro Oracle DB installation

Hello,
I am new to Solaris/Unix system landscape. I have a Sun enterprise 450 with 18GB hard drive. It has Solaris 9 on it and no other software at this time. I am planning on adding 2 more hard drives 18gb and 36gb to accommodate Oracle DB.
Recently I went through the Solaris Intermediate Sys admin training, knows the basic stuff but not fully confident to carry out the task on my own.
I would appreciate some one can help me with the sequence of steps that I need perform to
1. recognize the new hard drives in the system,
2. format,
3. partition. What is the normal strategy for partitioning? My current thinking is to have 36+18gb drives as data drives. This is where I am little bit lost. Can I make a entire 36GB drive as 1 slice for data, I am not quite sure how this is done in the real life, need your help.
4. creating the file system to store the database files.
Any help would be appreciated.

Hello,
Here is the rough idea for HA from my experience.
The important thing is that the binaries required to run SAP
are to be accessible before and after switchover.
In terms of this file system doesn't matter.
But SAP may recommend certain filesystem on linux
please refer to SAP installation guide.
I always use reiserfs or ext3fs.
For soft link I recommend you to refer SAP installation guide.
In your configuration the files related to SCS and DB is the key.
Again those files are to be accessible both from hostA and from hostB.
Easiest way is to use share these files like NFS or other shared file system
so that both nodes can access to these files.
And let the clustering software do mount and unmount those directory.
DB binaries, data and log are to be placed in shared storage subsystem.
(ex. /oracle/*)
SAP binaries, profiles and so on to be placed in shared storage as well.
(ex. /sapmnt/*)
You may want to place the binaries into local disk to make sure the binaries
are always accessible on OS level, even in the connection to storage subsystem
losts.
In this case you have to sync the binaries on both nodes manually.
Easiest way is just put on shared storage and mount them!
Furthermore you can use sapcpe function to sync necessary binaries
from /sapmnt to /usr/sap/<SID>.
For your last question /sapmnt should be located in storage subsystem
and not let the storage down!

I need help with activating Adobe MC CS4

Good day! I need help with activating Adobe MC CS4. Recent installation was not deactivated.I have Adobe License Certificate ID and other data and can provide it. Now activation not accept serial number provided in certificate.

What message do you get when the serial number is not accepted?

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

Need help with my usecase based on transient ViewObject

I am using 11.1.1.4.0 Jdev version. I need help with my usecase.Been trying it for 2 days but couldn't figure out the issue.
I have a transientVO . In this VO Rows will be populated programmatically. CountryId is an attribute of this VO. I have created a viewAccessor "CountriesVA" from Country VO of HR schema.
I have a LOV for the countryId which is based on this VA ,getting countries from CountryTable.
This is the model part which works fine.
Before the page load i have called a method to create a row for this transientVO.Once the row is created i can see the SOC in my page which i have created as below.
Now i want to insert a row in the transientVO if user selects a country and restrict duplicate entry . (As One row is already created 1st time there will be no rows created.after that rows will be inserted)
The issue is :: Suppose there are 2 countries. A & B .When user does the following actions :
Insert A . Done //as 1st entry
Insert B . Done //as 1st time entry
Insert A . duplicate not inserted
Insert B . getting inserted // the bug.
<af:selectOneChoice value="#{bindings.CountryId.inputValue}"
                        label="#{bindings.CountryId.label}"
                        required="#{bindings.CountryId.hints.mandatory}"
                        shortDesc="#{bindings.CountryId.hints.tooltip}" id="soc1"
                        immediate="true" autoSubmit="true"
                        valueChangeListener="#{pageFlowScope.managedBean.countryIdVC}">
    public void countryIdVC(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        String oldValue=null;
          setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
          if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
         oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
                setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
        String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
         //access the underlying RowSetIterator
         RowSetIterator rsi = dciter.getRowSetIterator();
      boolean duplicate=true;
      if(oldValue!=null){
                rsi.getCurrentRow().setAttribute("CountryId", oldValue);
    // Row row= rsi.findByKey(new Key(new Object[] { newValue}), 1)[0];
      Key key =new Key(new Object[] { newValue});
      Row row=rsi.getRow(key);
      if(row==null){
      System.err.println(duplicate);
        duplicate=false;
      }else{
        rsi.setCurrentRow(row);
         if(!duplicate){
         //get handle to the last row
         Row lastRow = rsi.last();
         //obtain the index of the last row
         int lastRowIndex = rsi.getRangeIndexOf(lastRow);
         //create a new row
         Row newRow = rsi.createRow();
         newRow.setAttribute("CountryId", newValue);
         //initialize the row
         newRow.setNewRowState(Row.STATUS_INITIALIZED);
         //add row to last index + 1 so it becomes last in the range set
         rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
         //make row the current row so it is displayed correctly
         rsi.setCurrentRow(newRow);

I read the reply from Andrejus Baranovskis and thought of studying and implementing that in my useCase.Well it worked . I implemented the same Logic but rowIteration was done in AppModule.
Con-Fusion, Bugs, Facts &amp; Workarounds: Iterating through View Object RowIterator Bug.(NOT ADF BUG, Development B…
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcservices.htm#sm0206
9.7.6 What You May Need to Know About Programmatic Row Set Iteration
The problem is solved ,the above links helped me solve the problem.
what i did is i have created a method in appmodule to iterate rows and all the method y operation bindings and my logic works fine ....
MY Advice to all Adf developers ,though i am not an expert but i can assure you to follow the above process for rowIteration.If you use the iterator binding in the manage bean to navigate the rows u'll face issues which are unexpected.
In AppModule :::::
    public boolean createRow(String oldValue,String newValue){
     System.err.println(oldValue+""+newValue);
      ViewObjectImpl vo=getViewObj1();
      boolean duplicate=false;
      if(oldValue!=null){
      RowSetIterator iter = vo.createRowSetIterator(null);
      System.err.println("iterating rows ");
         while (iter.hasNext()) {
             Row r = iter.next();
             System.err.println(iter.getRangeIndexOf(r)+" row is "+r.getAttribute("CountryId"));
             if(r.getAttribute("CountryId").toString().equals(newValue)){
                 duplicate=true;
                 break;
             // Do something with the current row.
         // close secondary row set iterator
         iter.closeRowSetIterator();
      return duplicate;
In ManageBean :::::
    public void countryIdVC(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        String oldValue=null;
       System.err.println("Old Value"+valueChangeEvent.getOldValue());
          setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
          if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
         oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
                setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
        String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         //access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
         //in this sample
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
         //access the underlying RowSetIterator
         RowSetIterator rsi = dciter.getRowSetIterator();
         if(oldValue!=null){
                      rsi.getCurrentRow().setAttribute("CountryId", oldValue);
           OperationBinding operation = bindings.getOperationBinding("createRow");
           operation.getParamsMap().put("oldValue", oldValue);
           operation.getParamsMap().put("newValue", newValue);
      if(!(Boolean)operation.execute()){
      //get handle to the last row
      Row lastRow = rsi.last();
      //obtain the index of the last row
      int lastRowIndex = rsi.getRangeIndexOf(lastRow);
      //create a new row
      Row newRow = rsi.createRow();
      newRow.setAttribute("CountryId", newValue);
      //initialize the row
      newRow.setNewRowState(Row.STATUS_INITIALIZED);
      //add row to last index + 1 so it becomes last in the range set
      System.err.println("Inserting row at index "+lastRowIndex+1);
      rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
      //make row the current row so it is displayed correctly
      rsi.setCurrentRow(newRow);
      else{
        System.err.println("Data found So not inserting,only setting current Row");
      Key key =new Key(new Object[] { newValue});
        rsi.setCurrentRow(rsi.getRow(key));

Need help with writing a rule

Need help with some rules. I want to book a number to a specific Entity at a Specific Custom 4 only. I don't want this formula to work at all C4 levels. How can this be done?
for example if Entity is "XBM1123" and we use C4 for tracking and the tracking level I want to book it to is IMPORT, how can this be done for a specific account 4400221
I have my formula as
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" or HS.Custom4.Member = "IMPORT" then
HS.EXP "A#4400221= A#4521111 + A#3526644 + A#635210"
End If
End if
this did not work. I got hte following error
Calculate started.<BR>Error executing VBScript Microsoft VBScript runtime
error, Line 259:Object doesn't support this property or method:
'HS.Custom4.Member'.<BR>Calculate finished.<BR>Error executing
VBScript %0.
I then changed it to the below and it still did not work
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" then
HS.EXP "A#4400221.C4#IMPORT= A#4521111 + A#3526644 + A#635210"
End If
End if
error
Invalid Custom1 member
specified for this function.
Invalid Destination specified for this function:
A#4400221.C4#IMPORT.

You are close.
Try:
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
    If HS.Entity.Member = "XBM1123" then
       HS.EXP "A#4400221.C4#IMPORT= A#4521111.C4#IMPORT + A#3526644.C4#IMPORT + A#635210.C4#IMPORT"
    End If
End if
or replace IMPORT with with Top_C4 or what ever member you need to copy to C4#IMPORT.
Rule of thumb, to be on the safe side and for most simple calcs, is if you mention a dimension on the left side, you need to define it on the right side as well.

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Need help with ADF Runtime 11.1.1.6 installation into WLS 10.3.6

Similar Messages

Maybe you are looking for