Need help with adjustment brush in LR3.6, Windows 7

I have a couple questions regarding adjustment brushes in LR 3.6 which I either can't find the answer for or the answer isn't working for me.
1.  I recently found out there should be Iris Enhance, Skin Soften, etc. brushes in the presets.  I can't find them under the adjustment brush.  I've tried going to Edit->Preferences->Presets->Restore Local Adjustment Presets as several others have suggested but it doesn't appear to do anything.   I have found these files where I've read they're supposed to be (../AppData/Roaming/Adobe/Lightroom/Local Adjustment Presets) but I can't find them in LR unless they're somewhere other than the Adjustment Brush panel.
2. Also, 'O' turns the mask overlay on and off as it should.  I have 'on' set to red but for some reason 'off' is set to blue and I have to desaturate it everytime I turn off the overlay mask.  How do I change the "off" state to be no color?
Thanks.

I know off is supposed to be no color but for some reason it's a faded blue color.  The little rectangle next to color that's supposed to have a sort of 'X' from the corners isn't gray, like it's supposed to be, but blue.
As far as I know, I only have 1 catalog.  I went to Edit->Preferences->Presets and I do not have "store presets with catalog" checked. I checked it and have now found the presets I asked about.  Thanks much.
Still can't figure out the mask overlay thing and it's really annoying to have to keep turning it off.

Similar Messages

  • Need help with adjusting Javascript code to work in Adobe Edge (Countdown)

    Hello
    Im a newbie when it comes to working with Javascript and Adobe Edge and need a bit of help with adjusting some javascript code to work with Adobe Edge. A friend of mine helped me with making this javascript code: Edit fiddle - JSFiddle
    Its a simple countdown which counts down to a certain time at a certain date. What I aim to do is to add this code as a trigger on a text-element called "countdown" (within a symbol called "count").
    I have tried to do this as the code is, but it does not work. Anyone have any suggestions?
    Thanks!
    Mvh,
    Øyvind Hermans

    Hello again
    I have stumbled upon a problem with these animations; They crash the browser after viewing them a little while, usually less than 30 seconds in.
    Is this problem also occuring when you watch the animations?
    Is the countdown-code to much for the browsers to handle?
    Thanks in advance for your answers.
    Sincerely,
    Øyvind Hermans

  • Help with Adjustment brush

    Hi All,
    I have upgraded LR2 to 2.1. Now I can't use the adjustment brush. When i click on the photo to make an adjustment - nothing happens; not white dot, no change, no nothing. HELP! What am I doing wrong? The gradient filter works just fine.
    Any help will be greatly appreciated.
    Al

    Albert - if you haven't already, after clicking on the brush tick the small box underneath it to open a drop-down list. At the bottom of this list is another box alongside the word 'Colour' (or color if you're American :-) ). Click or double click on this box to bring up the colour pallet and using the ey-dropper pick a crazy colour such as a deep red. Now try painting with the bush. If you didn't notice the effects before it may be because the chosen colour was way at the bottom of the colour pallet giving you a neutral grey (gray) which is sometimes hard to spot.

  • Need help with adjusting size for photos in my website

    Wow it's super to know about adobe forum which i never thought existed, i have been to the adobe site several times befor but never noticed there is a forum
    Ok i have few issues would like some help if possible.
    I have a website for public holidays and festivals and i have been really stressed in the ways i am adding the photos which i am buying from fotolia. First in my featured images the screen is very wide and slim...so i am really having hard time with adjusting the photos so they would fit in a way and show the best part of the photo in the screen, once the featured image is clicked on then their is no problem since it opens up in the full size. Is their a speacial tool in adope (i have cs4) which deals with images in this aspect? Secondly, before i was downloading the image with the regular size in which i bought them (around 3000 px) but that significantly slowed my webiste and i had to resize them into around 500 px, but now the image is small. what is the way around that, is there a feature where i can keep the photo big size with high resolution and little px. I see many big nice resolution photos but very small in size. i have just purchased a lot of photos that i would be posting soon and would like to do them right from the start.
    I don't know if i explain the situation right in words but you can take a look here, most photos for the posts are on the main page, please take a look and tell me how i should revise or make better for my photos in the featured images.
    I have very little experiance in photoshop so i made a very simple logo, but is there a tool that is speacialy designed to help make it easy doing a professional logo?
    Any comments, hints or help would be highly appreciated
    Hmmm one more thing....how do i add a pic for my profile? i don't see anywhere i can do so

    You should use the crop tool to crop your images. You should never squish your images, it really looks unprofessional:
    For your problem with saving images, you can optimize your images for web using the "Save for Web…" menu option:
    Make sure that you save your images at the dimension that you want them to display on your website (It looks like all your images in the blog are 620px wide, go with that).
    As for your logo, you can make them in Photoshop or Illustrator, but I would reccomend making yours in the latter. Here are some tutorials on logo creation: http://ibrandstudio.com/tutorials/46-adobe-illustrator-tutorials-logo-design

  • Please help! I need help with history brush problem

    I'm completely new to photoshop but I have done this thing before:
    open image
    >ctrl J
    >>select new layer
    >>>select Curves
    >>>>adjust accordingly
    >>>>>ctrl+backspace (pic goes back to original color)
    >>>>>>select history brush
    this paints in that curve layer i guess...kind of like I'm putting a hole in my orginial to see the change that I made in the curves layer but only on the places I want
    So for some reason this isn't working anymore! And i have no idea why! Now this error pops up: Could not use the history brush because the history state does not contain a corresponding layer.
    Im using CS4 extended
    What am I doing wrong?

    As stated, set your History Brush source.
    Also always be careful to note which layer is active after you do an undo operation.
    -Noel

  • Need help with the brush tool.

    I just got Illustrator yesterday, and I'm trying to ink a sketch. So I open the file of the sketch, Save it as an adobe Illustrator document, then I create a new layer, then when I go to trace the sketch I get a symbol saying I cant use the brush tool. How do I fix this? Thanks in advance.

    Have you actually selected a brush stroke from the Brushes palette? Brusches are differnt from normal line strokes, the latter of which you can create with the Pencil tool...
    Mylenium

  • Need help with " BOOTCAMP" after trying to install windows 7

    I have a problem. I was trying to install windows 7 on my MBP, i followed all of the instructions. When i was trying to install the cd it was asking me in what partition that i wanted to install the drivers Partition 0, 1, 2, 3 etc. I had to create a new one and it asked me and gave me and option that it will need to erase mac(journaled) and it gave me another option to create a new volumen, the one that i erased was mac(journaled) i don't know if i was supposed to or not. Now when i click the BOOTCAMP to start the windows set up this is the message that pops up " The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
    I tried everything and it is till doing the same thing i don't know what to do !! if somebody can help me i will very much appreciated.
    Another thing i did not mention. The message started showing up after i click the option erase and mac(journaled) and create a new one and after i installed mac os x 10.5.7 in the bootcamp partition.

    Used Boot Camp Assistant only, and not Disk Utility, to create one volume for Windows? you wouldn't want to erase and use mac extended journaled.
    At this point, you will need to initialize your drive and restore from TimeMachine as one HFS+ partition and redo with BCA.

  • Acrobat  X Pro- Need Help with Linking and creating a flyout window in PDF

    I'm trying to create a flyout window in a PDF document (Have Acrobat X-Pro) I'm not a programmer or graphics designer. Almost like a flyout or callout in a Powerpoint presentation.
    Basically I want to create multiple icon/s on the base PDF page drawing and have several links to other pictures or items that when opened, wouldn't take up the whole screen and can then be closed so you'd only be looking at the base PDF page.
    I've tried using the link tool, but only seems to let me create a small rectangle box, click on it and have a new pdf or other file window open up. This is ok, but not really what I need it to do. I want this new window (or even a flyout) to be smaller so it doesn't cover the original base PDF layer and still be able to be closed.
    - Anyone have directions on how to do that in a pdf?
    - Also, is there a way to create a custom link icon instead of that lame rectangle in the link tool?

    Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
    You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
    // Get the icon from the b3 button
    var oIcon = getField("b3").buttonGetIcon();
    // Get  reference to the b0 button
    var f = getField("b0");
    // Set the icon of the b0 button to the icon retrieved from the hidden button
    f.buttonSetIcon(oIcon);
    // Show the b0 button
    f.display = display.visible;
    This code would go in the Mouse Up event of the smaller button.

  • Need help with a printer connected to a windows home server

    I have a Windows Home Server that has a Brother laser printer connected to it via a USB cable. The printer driver is installed on the WHS and on each PC. My PCs on the network find the printer and can print to it with no problems. But, with my MBA, I'm having issues. I can see the printer as part of the server when installing/setting it up on the MBA and found the Ma printer driver from Brother and installed it on MBA. However, print jobs I send it never print out. What did I do wrong?

    Your MBA should be able to detect the printer and locate the driver, install it and mount the printer. I have an HP5180 color all in one, which I have connected to my Windows PC, and my MBA sees it and prints to it just fine. Have you looked to see if Brother has a Mac driver for it?

  • Need Help with Digivox ATSC USB 2.0 Windows XP

    Installed device according to instructions - no errors. Tried on 3 machines at least 2.0Ghz. Device will not light up (I assume it lights up). Neither emTVSetup nor Arcsoft can find it although it is in the device manager.

    Broken stick?

  • I need help with scrolling and keyboard buttons on windows 7

    I've been able to install sound, bluetooth, and I'm able to do a right click.
    But for some reason, I still *can't scroll* and *the buttons on the keyboard (i.e. the eject button*), still won't work.
    There are two trackpad drivers on the snow leopard dvd. One is called multitouch and one just called *track pad*. Which one of those should I install?

    Hi nayefo,
    Try installing multitouch, and then see, while in windows, if you've successfully installed multitouch and multitouch mouse, you should have those drivers. Also check if you've installed trackpad and trackpad enabler.
    Cheers,
    Erik

  • Need help with the Vibrance adjustment in Photoshop CC 2014.

    Need help with the Vibrance adjustment in Photoshop CC 2014.
    Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value.  Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
    Thanks,
    GD

    Thank you for your reply. 
    Yes, that does reset to “0” and the Pink does disappear.
    But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
    GD
    Guy Diehl  web: www.guydiehl.com | email: [email protected]

  • Need help with SQL Query with Inline View + Group by

    Hello Gurus,
    I would really appreciate your time and effort regarding this query. I have the following data set.
    Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
    1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*20.00*-------------19
    1234567----------11223--------------7/5/2008-----------Adjustment for bad quality---------44345563------------------A-----------------10.00------------19
    7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
    4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765--------------------I---------------------30.00-------------19
    Please Ignore '----', added it for clarity
    I am trying to write a query to aggregate paid_amount based on Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number and display description with Invoice_type 'I' when there are multiple records with the same Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number. When there are no multiple records I want to display the respective Description.
    The query should return the following data set
    Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
    1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*10.00*------------19
    7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
    4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765-------------------I---------------------30.00--------------19
    The following is my query. I am kind of lost.
    select B.Description, A.sequence_id,A.check_date, A.check_number, A.invoice_number, A.amount, A.vendor_number
    from (
    select sequence_id,check_date, check_number, invoice_number, sum(paid_amount) amount, vendor_number
    from INVOICE
    group by sequence_id,check_date, check_number, invoice_number, vendor_number
    ) A, INVOICE B
    where A.sequence_id = B.sequence_id
    Thanks,
    Nick

    It looks like it is a duplicate thread - correct me if i'm wrong in this case ->
    Need help with SQL Query with Inline View + Group by
    Regards.
    Satyaki De.

  • I need help with adobe muse sub-menu styling

    i need help with adobe muse sub-menu styling~!  i can adjust them to exactly how i like them, but then when i go to the next set of sub-menus, the other ones revert back to the starting white/black boxes.  i am frustrated as i have redone this so many times!  Please help me!

    To achieve this, you can use an accordion widget with custum styling.
    IF you search for Terry White, Muse, accordion, you will find some video tutorials on YouTube.

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

Maybe you are looking for