Need help with administrator password for first use??
Hi, I'm not sure if this is a dummy question. I just installed BI EE, then I was trying to open a sample Repository file, it asked me for password for Administrator account. I entered SADMIN as I found from the HELP (attached below), it didn't work; then I left it blank, it didn't work, then I tried any password I used during the installation, none of them worked.
Hopefully I can get some insight here.
Thank and have a good day.
Crystal
====================
About the Oracle BI Administrator Account
The Oracle BI Administrator account (user ID of Administrator) is a default user account in every Oracle BI repository. This is a permanent account. It cannot be deleted or modified other than to change the password and logging level. It is designed to perform all administrative tasks in a repository, such as importing physical schemas, creating business models, and creating users and groups.
NOTE: The Oracle BI Administrator account is not the same as the Windows NT and Windows 2000 Administrator account. The administrative privileges granted to this account function only within the Oracle BI Server environment.
When you create a new repository, the Oracle BI Administrator account is created automatically and has no password assigned to it. You should assign a password for the Oracle BI Administrator account as soon as you create the repository. The Oracle BI Administrator account created during the installation of the Oracle BI repository, that is, the repository shipped with Oracle BI, has the default password SADMIN.
The Oracle BI Administrator account belongs to the Administrators group by default and cannot be deleted from it. The person logged on using the Oracle BI Administrator user ID or any member of the Oracle BI Administrators group has permissions to change anything in the repository. Any query issued from the Oracle BI Administrator account has complete access to the data; no restrictions apply to any objects.
Goran O wrote:
Try Administrator/Administrator, it works for sh.rpd and samplesales.rpd.
Regards
Goran
http://108obiee.blogspot.com
Thank you too!!
Similar Messages
-
HELP HELP HELP with adminstrator password for pavilion dv7 beats audio
Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.
Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP. -
I still need help with the Dictionary for my Nokia...
I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW. -
HELP! I NEED HELP WITH MY PASSWORD
I RECENTLY PURCHASED MY IBOOK FROM AN INDUVIDUAL AND I CANT SET UP AN EMAIL ADDRESS OR ANYTHING ELSE BECAUSE IT SAYS THAT MY PASSWORD IN INCORRECT.THE USERNAME THAT POPS UP IS MY NAME.I NEED TO FIND OUT HOW TO TAKE CARE OF THIS.ANY HELP? THANKS!
First off, all caps is considered shouting. Bad idea.
As for your actual question -- a bit more information is required. Do you need to change the password for your user account? Your user account is what you login to when you turn on your computer. It might be setup so you don't have to enter your username and password when you boot up. It is set this way if you can turn it on, and when it's done starting, you see a desktop and dock and can use your programs. On the other hand, you might have to enter your username (either by typing or clicking on your icon) and then your password. After doing that you will be at the desktop.
If you can't get to the desktop be, it means you aren't typing the password correctly. Passwords are case sensitive -- perhaps you just need to turn caps-lock off -- e.g., "PASSWORD" is not the same as "password" and if your password is set to something like the latter, typing the former will always fail. If you don't know the password, you can reset it by booting from the system install discs (put in system disc, hold down "c" while turning on the computer, ignore the open popup regarding installation, from the menu, choose the option for resetting the password, choose the user you wish to reset, and then enter a new password).
On the other hand, if you get to your desktop and can use programs, the above is not your problem. Instead, you are having a problem loging into your mail account because you don't know your password. In that case, your only option is to contact the mail service provider and ask for your password. That issue has nothing to do with your operating system. -
Please Help, forgot administrator password for macbook pro 2011
Dear community,
I forgot my administrator password for my macbook pro from 2011
I didn´t came with any CD/DVD it's osx lion
And when I choose the reset using your apple ID icon, nothing happens
please adviseReset Password
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/TS1544 -
HT204088 I need help with my password I forgot the alternative email and securtity question answers
I have an itunes account and my children keep charging my credit card . I need to change my password but......
I don't remember the alternative email address used and don't remember the security question answers.First off, all caps is considered shouting. Bad idea.
As for your actual question -- a bit more information is required. Do you need to change the password for your user account? Your user account is what you login to when you turn on your computer. It might be setup so you don't have to enter your username and password when you boot up. It is set this way if you can turn it on, and when it's done starting, you see a desktop and dock and can use your programs. On the other hand, you might have to enter your username (either by typing or clicking on your icon) and then your password. After doing that you will be at the desktop.
If you can't get to the desktop be, it means you aren't typing the password correctly. Passwords are case sensitive -- perhaps you just need to turn caps-lock off -- e.g., "PASSWORD" is not the same as "password" and if your password is set to something like the latter, typing the former will always fail. If you don't know the password, you can reset it by booting from the system install discs (put in system disc, hold down "c" while turning on the computer, ignore the open popup regarding installation, from the menu, choose the option for resetting the password, choose the user you wish to reset, and then enter a new password).
On the other hand, if you get to your desktop and can use programs, the above is not your problem. Instead, you are having a problem loging into your mail account because you don't know your password. In that case, your only option is to contact the mail service provider and ask for your password. That issue has nothing to do with your operating system. -
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name. -
Need help with jre-1_5_0_04 windows i586 use windows 98 first edition HELP
HI,
this is my first post here so please bear with me while I try to explain the problems I seem to be having here . I hope that someone here can assist me with these issues as well???
I am using the windows98 first edition, and I wanted to use the latest version of java which I think is this 1_5_0_04 version, but when I get it download it said it is recommended that I not use this version,
but I work with Yahoo sitebuilder for my online websites and need this verision to get sitebuilder to work?
Now I read somewhere just dont remember where forgive me, but it said in that artical that there is a workaround or something to that nature to make this version of Java to work with the windows 98 version I am using?
I do seem to have other versions of java on this PC as well but dont no how to remove them all and where to look to remove the older versions of java if need be to get this latest version of java to work right for me?
I did the test and it said I have the latest version of the java but like I said it now wont seem to work with this yahoo site builder and it was working before but just mega and I do mean mega sloww???
can someone please further assist me with this and please, I will need detail step by step as to how to get this java to work with my PC and be workable with the Yahoo sitebuilder as well???
thanks in advance and I eagerly await some useful steps to try out here .
I think also that I might need to go in and change paths or classes or something of that nature as well to try to get it to work. the java??
Now the download took I wanted to mention apart from the install part that said this might not be compatiable with the version of windows that I am useing but I am hopeing again that there is a work around to this issue??
thanks
LIBBYThere is no work around, that Windows version is no longer compatible.
You can find older versions of Java here:
http://java.sun.com/products/archive/index.html
You may want to find the latest version that is compatible with your Windows, and install that.
I strongly recommend that you uninstall all existing Java versions first. Do that using Windows' Add/Remove Program function. -
Help with administrator password!
I changed my administrator password but it's not working, nor is the original. Any suggestions?
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself
Reset OS X Password Without an OS X CD — Tech News and Analysis
How To Create A New Administrator Account - Hack Mac
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com. -
Need help with correction inscript for duplication on regular basis
Hi,
I am using Oracle 10.2.0.4 on Win 2008 R2. We have Archive mode enabled and no rman catalog is used. I have a requirement where i have to duplicate prod sevrer on regular basis to development server.
I have created few batch files so that the entire process in automated. Stored all the scripts in c:\script\clone\ directory.+
I have taken the backup copy of password and spfile from prod server and copied to the development server in same location.
These are the scripts i run in order:
*1_clone.bat*
set ORACLE_SID=orcl
sqlplus / as sysdba @c:\script\clone\2_test.bat
*2_test.bat*
shutdown immediate
startup nomount
host rman target sys/oracle@live nocatalog auxiliary / @c:\script\clone\3_rman.rcv
*3_rman.rcv*
run {
allocate auxiliary channel d1 type disk;
duplicate target database to ORCL NOFILENAMECHECK;
exit
When the duplication process in about to finish, i get below error:
contents of memory script:
shutdown clone;
startup clone nomount;
executing Memory Script
RMAN-03002: failure of duplicate DB command at 07/31/2012 08:02:21
RMAN-03015: error occured in stored script memory script
RMAN-06136: Oracle error from auxiliary database: ORA-01013: user requested cancel of current operation
Recovery Manager complete
SQL>
When i press exit, this window closes and i can run the alter database open resetlogs;+ command from a new sql prompt. I check online and some suggest there might be a window open with system user connected. Please suggest any changes in the script.
Best Regards,Hello;
Having another session with system user will cause rman to throw this error. For example another session used to start up database in nomount mode still being active.
Duriing the cloning process the rman session needs to be exclusively connected to the auxiliary instance (no other session are allowed).
Duplicate post
request for help with rman cloning script
Best Regards
mseberg
Edited by: mseberg on Jul 31, 2012 5:02 AM -
Need help with adjusting size for photos in my website
Wow it's super to know about adobe forum which i never thought existed, i have been to the adobe site several times befor but never noticed there is a forum
Ok i have few issues would like some help if possible.
I have a website for public holidays and festivals and i have been really stressed in the ways i am adding the photos which i am buying from fotolia. First in my featured images the screen is very wide and slim...so i am really having hard time with adjusting the photos so they would fit in a way and show the best part of the photo in the screen, once the featured image is clicked on then their is no problem since it opens up in the full size. Is their a speacial tool in adope (i have cs4) which deals with images in this aspect? Secondly, before i was downloading the image with the regular size in which i bought them (around 3000 px) but that significantly slowed my webiste and i had to resize them into around 500 px, but now the image is small. what is the way around that, is there a feature where i can keep the photo big size with high resolution and little px. I see many big nice resolution photos but very small in size. i have just purchased a lot of photos that i would be posting soon and would like to do them right from the start.
I don't know if i explain the situation right in words but you can take a look here, most photos for the posts are on the main page, please take a look and tell me how i should revise or make better for my photos in the featured images.
I have very little experiance in photoshop so i made a very simple logo, but is there a tool that is speacialy designed to help make it easy doing a professional logo?
Any comments, hints or help would be highly appreciated
Hmmm one more thing....how do i add a pic for my profile? i don't see anywhere i can do soYou should use the crop tool to crop your images. You should never squish your images, it really looks unprofessional:
For your problem with saving images, you can optimize your images for web using the "Save for Web…" menu option:
Make sure that you save your images at the dimension that you want them to display on your website (It looks like all your images in the blog are 620px wide, go with that).
As for your logo, you can make them in Photoshop or Illustrator, but I would reccomend making yours in the latter. Here are some tutorials on logo creation: http://ibrandstudio.com/tutorials/46-adobe-illustrator-tutorials-logo-design -
Need help with LabVIEW code for motor control.
Hi,
My name is Sasi. I am a BME grad student working on my thesis topic of evaluating spine implants for low back pain. For this I am building a test machine that would apply pure moments to a spine specimen. I am using LabVIEW 8.5 to implement control of a brushless AC servo motor. My requirement is,
Step 1: Initialize the motor.
Step 2: Start moving it at a uniform RPM to the right (This RPM value too user can enter).
Step
3: While doin Step 2; simultaneously read torque cell data (Using DAQ
asst.). DAQ o/p is from 0 V to 10 V; 0 V being -10 Nm n
10 V being +10 Nm
Step 4: When Torque value reaches +10 Nm, i.e 10 V, the motor stops.
Step
5: From the position where motor stopped (i.e no need to reset to
initial position) Start moving in the opposite direction at the same
uniform RPM as in Step 2 while reading torque cell data.
Step 6: Once again when torque reaches -10 Nm, i.e. 0 V, the motor should stop.
Step 7: Repeat 'Step 2' to 'Step 6' 3 times.
Step 8: Reset motor postion.
Till now I have managed to get the motor to move forward n backward @ a desired vel, accl, n deceleration for 3 cycles. I am attaching my code. I am having problem inserting the code for reading DAQmx amidst all this. Can anyone help me out.
Thnks,
Sasi.
Solved!
Go to Solution.
Attachments:
Test_012609.vi 35 KBHi Sasidhar,
I took a look at your problem and I think I have a workable solution for you. I definitely agree with Lynn's suggestion of using parallel loops. This will allow the DAQmx portion to run uninhibited by the motion portion, and vice versa. Plus, you only need to iterate the motion loop whenever the voltage level crosses a threshold. So, by iterating on the motion code in the same loop that you are iterating on DAQmx code, you are essentially wasting processor.
I created a VI that should do what you are wanting. I tested it out myself and it works great. You might have a tweak a few things to apply to your system (like motion board ID and DAQmx physical channel, etc.). I used two parallel loops and event-based programming. Basically the motion loop starts the motor spinning at the specified velocity. Once the motor is spinning, it waits for the DAQmx loop to tell it that the voltage value has crossed the threshold. When the voltage value exceeds the maximum threshold (which I set to a value slightly less than 10 to allow for jitter and saturation), the DAQmx loop signals the motion loop that it can finish its iteration. The motion loop stops the motion, reverses the direction, and starts the motion again. Once motion has started, it again waits for the DAQmx loop to tell it that a threshold has occurred, but this time, it is looking for a minimum threshold. I used "Occurrences" to implement the event-based programming in LabVIEW.
I have commented the code rather thouroughly, so hopefully the comments will answer any remaining questions. The benefit of using event-based programming for this is that you save processor time, and your motion is more closely synchonized with the DAQmx. Instead of iterating the motion loop as fast as you can, checking for updates each time, you just pause it, and wait for the other loop to tell you when to start up again. In the mean time, the processor doesn't have to worry about iterating that loop over and over again. Also, when the occurrence does occur, you catch it immediately, instead of having to wait until the next iteration. Thus, you are more closely synchronized with the DAQmx portion of the code.
I hope this will help you. Please post back if you have any questions about the code or its implementation. Good Luck!
Message Edited by Wes P on 02-03-2009 05:18 PM
Wes P
Certified LabVIEW Developer
Attachments:
Motion and DAQ.vi 59 KB
DAQmx Loop.png 24 KB
Motion Loop.png 17 KB -
Not exactly iweb - need help with a graphic for my site
This doesn't fit anywhere so dumping it here. I drew by hand a graphic I want to use with iweb to put on my site as my site's logo. Main problem is that getting the background transparent isn't working well as when it was scanned the scanner didn't back the background "pure" white. I have tried adjusting the whitepoint and setting the color depth down, but still no good. I don't know a ton about graphic program use. I have an older copy of graphic converter that came on this powerbook when i got it. I would be fine having the graphic loose the marker look and have solid fill colors - just I am not good enough with computer drawing tools to do it on the computer! So I either need to get a volunteer to help me out, or some help with some detailed instructions to get this to work out... (also I am broke so no cost/shareware is only option here)
many thanks!!!!
I can get you a scanned jpg of the pic if needed.THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png -
Need performance! - Need help with Server Architecture for SSAS on Azure VM
I would like to build 100% Azure VM base solution. We can install as many as needed.
I have large amount data in DW. (100GB-1000GB)
I would like to provide PowerView reports in SharePoints.
I would like to have report data be as real time as possible. (Min data is updated once in 2 hours)
These are requirements:
-SharePoint 2013
-PowerView
-SSAS OLAP Cube
-SQL Server DW&Staging DB (Currently DW&Staging on same server)
I need help specially what can be done with SSAS to meet requirements? Should be installed to own application server? Possible to install multiple SSAS? SSRS needs own server?
I appreciate also links to server topology diagrams.
Kenny_II assume you mean 100GB-1000GB (not 1000TB) right?
For Sharepoint I would refer to the sizing guide for diagrams and sizing:
http://technet.microsoft.com/en-us/library/ff758647(v=office.15).aspx
SSRS (and Power View) will run in the SharePoint farm on a SharePoint app server potentially with other SharePoint services.
I would definitely put SSAS on a dedicated server for a cube that size. Depending on how well your data compresses, there may not be a VM in Azure with enough RAM to put your model into a Tabular SSAS model. I would prototype it with a subset of data to see
how well it compresses. You can always use a Multidimensional model as a fallback.
Depending on how much processing the SSAS model impacts user queries (since it is happening during the day) you could build an SSAS processing server and a separate SSAS query server and run the XMLA Synchronize command to copy the cube incrementally from processing
to query servers.
Does that help?
http://artisconsulting.com/Blogs/GregGalloway -
Need help with SQL retrieval for previous month till current date
Hi ,
Need help generating statistics from previous month from date of enquiry till current date of enquiry.
and have to display it according to date.
Date of enquiry : 03/02/2012
Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
sample1 20 30 40
sample 2 40 40 50
sample 3 50 30 30
Hope you guys can help me with this.
RegardsHi,
932472 wrote:
Scenario
1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
2)displaying the count of the application made based on the date.
Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
sample 1 30 40 50 44 30
sample 2 35 45 55
sample 3 36 45 55Explain how you get those results from the sample data you posted.
It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
SELECT application_type as Application_type
, COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END) AS 01012012 (should be getting dynamically)
, COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END) AS 02022012
, COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END) AS 03022012
, COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END) AS 04022012
FROM table_1
GROUP BY application_type
ORDER BY application_typeThat's the bais idea.
You can simplify it a little by factoring out the date differences:WITH got_d AS
SELECT qty
, TRUNC ( dt
- ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
, -1
) AS d
FROM table1
WHERE dt >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
, -1
AND dt < TRUNC (SYSDATE) + 1
SELECT SUM (CASE WHEN d = 1 THEN qty END) AS day_1
, SUM (CASE WHEN d = 2 THEN qty END) AS day_2
, SUM (CASE WHEN d = 62 THEN qty END) AS day_62
FROM got_d
See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases.
Maybe you are looking for
-
Installing Snow Leopard server (10.6.0) over Snow Leopard 10.6.2
I need to convert my Mac Pro to run Snow Leopard Server. I have the DVDs. The installer tells me I cannot perform the upgrade because the OS on the machine is more recent than the one on the DVD. I guess I have to downgrade to Snow Leopard 10.6.0 bef
-
Using Nokia PC Suite - Communication Center to cal...
I know that I can use the Nokia PC Suite - Communication Center (NPCS-CC) to start a call in my mobile, but... Is it possible to configure the PC to be used as the speaking / hearing device? I would love to make a phone call from the PC and be able t
-
Cannot update blackberry app world. It shows some weird error.
Here is the story. I was using os7 and and 2 days back I upgraded it to 7.1. As usual after upgrading the os, I updated pre installed apps. Like Facebook and bbm and did a re start. After re staring I found that there is no Facebook and bbm icon. I w
-
Problem opening Canon 5D Mark II raw files
Adobe support has started a case file #181481276 on my problem. I recently had my hard drive replaced so I had to reload my photoshop elements 7. It wouldn't open the Canon 5D Mark II raw files so I downloaded the latest raw plug-in 5.5 for PSE 7.
-
Speed issue macbook5,1 extremely slow under lion
Often have to "force quit" Aperture, Omnigraffle, Safari, Skype never open at the same time. The speed is very slow. MacBook 5,1 OS-X Lion 10.7.3, Ram 4Go, HD WD-6400 ScorpioBlue