Need Help With Adobe Photoshop Elements 2.0

I have and use Adobe Acrobat and three versions of Adobe Photoshop Elements (2, 5 and 7). I use version 2 frequently as I'm more familiar with it and it's simpler to use for what I need to do. All was fine until recently when my computer was installed with Windows 8. Now I can't save photo edits from Version 2.0...... it aborts each time I try. Why is that? It is costing me a lot of wasted time. The other versions that i have don't do that. Need help. Thanks. Stu Snyder.

The first thing i would try is deleting the Photoshop Elements 2.0 Prefs folder as explained in the post #2 linked to below:
http://forums.adobe.com/thread/1254224?tstart=30
Does it happen when trying to save as any file format or just a certain one like jpeg?
Have you tried saving a photo to a different place like your desktop?

Similar Messages

  • Need help with Adobe Premiere Elements 2

    I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

    hi Bill -
    ok fine. I have PSDs too. I tried what you said.
    I put a PSD right beside a JPEG in the timeline. I rendered it (which I
    didn't know to do because the instructions don't even mention it. The
    instructions are terrible. Seems it leaves out a lot of info.)
    So, then I click PLAY on my monitor. I see no difference between the PSD
    and the JPEG yet. So, if I want to put this on YouTube, what's the best way
    exactly, without gettting too technical?  It looks like I have the choice
    between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
    likes wmv.
    From: Bill Hunt <[email protected]>
    To: Tommy Midyette <[email protected]>
    Date: 6/3/2010 10:01:24 AM
    Subject: need help with Adobe Premiere Elements 2
    >
    When you drag the stills to the Timeline, there should be a red line
    above them. Press Enter to Render the Timeline.
     
    Do not know the particulars of PrE 2, but in later versions, you can
    Rt-click on the Program Monitor, and choose Magnification = 100%, rather
    than Fit. You might have to resize your Program Monitor, but check at 100%.
     
    Also remember a few points:
     
    1.) You are looking at a DVD-quality image now, and that was designed
    with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
    hi-rez sources and displays is probably less than what VHS vs DVD was, not
    that long ago.
    2.) You are looking at an emulation, a preview
    3.) Your images have already been compressed to JPEG once, loosing
    quality. That is why I always work in PSD, especially if there has already
    been one JPEG compression, whether in camera, or in the image processing
    stage. I keep JPEG either out of my workflow, or as limited, as is
    possible. Some do not see the quality loss with JPEG compression, but I do,
    and if I can create images that are as good as it gets, I know that my
    clients will be happy.
     
    Good luck,
     
    Hunt
    >

  • I need help installing Adobe photoshope elements 12

    I need help downloading adobe photoshop elements 12

    HI Marlene McGann
    Download it from below link : http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    Follow the Important instructions given on the page to start your download.
    Use your serial key to activate it.
    ~Mandy

  • I need help reinstalling Adobe Photoshop Elements 12 and Premium Elements 12. I have opaid for these programs however my computer recently needed to be reset via recovery and they were erased, Any help? The link Adobe chat gave me download something-but t

    Help. Need to reinstall Adobe Photoshop Elements 12 and Premier Elements 12. Both are pre paid programs that I had on computer, however the system needed to be reset via recovery and these programs were erased> Since I already forked out the cash for these I'd like to be using them as I am an artist and need the programs. Please, any help? Ideas?

    You should try to keep the title short and sweet and put the details in the message... it's a mystery what happened regarding the download link, so here's some...
    PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

  • Help With Adobe Photoshop Elements Download and Installation

    I purchased Adobe Photoshop Elements yesterday and was sent the download link. I tried to download the product but one of the 2 files I need would not download and after a few attempts it blocked my access saying there were too many download attempts. Please help.

    if you follow all 7 steps you can directly download a trial here:  Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • Need help installing Adobe Photoshop Elements 12

    I am unable to install adobe photoshop elements 12, need help.

    What problem are you having exactly?
    Which operating system?
    Any error messages or error codes?

  • I need help!  Adobe Photoshop Elements 3 the app quits all the time!

    HELP!
    Every time I open up Adobe Photoshop Elements 3, and everything is all loaded up like the panel and everything, and then it just automatically stops. Like the program just quits itself, and a small window comes up saying that the program has quit after restarting. And there is Ignore, Cancel, Restart. I have no idea hwat is wrong with it! I have opened up and used it before SO many times!
    Please help!!!!!!

    Thank you I will definitely give that a try. I hope it works. I might just reinstall it instead of doing the other accounts stuff. I also have trouble with the Photo booth effects.
    Every time I go to the 6th one, like I clicked on it and then it just quits. It works on my guest account, but not on this one How can I get it to work?

  • Can anyone help with Adobe Photoshop Elements 13 installation?

    I initially tried the free trial of Photoshop Elements 13, but it wouldn't install. When I received an email suggesting I purchase the product on sale for USD 70. (ending January 3) I purchased it, and have now paid for it and received a serial number.  On January 3, when I tried to install it, I was told downloading, extraction and installation were complete, but then it quit. I tried again, but only got as far as 'download complete.' I clicked on 'open bundle,' then got message beginning: "The file archive part of Adobe Photoshop Elements is missing..."  I repeated the process and got the same message.
    On January 5 I paid a computer professional to install it.  He got it working and I actually worked on a couple of images, but it quit after about fifteen minutes, and I am getting the above message again.

    if you follow all 7 steps you can directly download a trial here:  Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • Raw Beginner need help with Adobe Photoshop CS2

    I am reading Photoshop CS2 for digital photographers by Scott Kelby. I am looking at pg 55 if any one has this book and would like to visually see what I am about to describe. I own Adobe Photoshop CS2 software. After bringing up Adobe bride RAW on my PC, I then see all the settings, Exposure, Shadows, Brightness, Contrast, and Saturation.. Located directly above all of these settings is Auto and Default which you can click on and adjust all settings at the same time. If you don't like what you see you click on Default to go back to the original, you can then make your adjustments individually. In my CS2 book there is an Auto box you can check or un-check beside each setting, Exposure, Shadows, Brightness, and Contrast. My question is how do I get the Auto box beside each setting so I can simply put a check in that box and preview changes individually instead of the Auto and Default on top which changes every setting at the same time? I hope this make since to you, if not I will try to explain again.

    Thank you Ramon for your help. I will just be happy with what I have, which works fine but I thought it might be better for me to have the individual Auto check box for each setting. Thank you for the tip to double-click the sliders to reset it to default, it works in CS2 also:) Actually this gives me more control and works out great now that I think about it. I am sure there are more handy little tips I should know about but don't because I am a beginner in learning RAW. Hopefully I'll stumble across a book or some thing over the internet that will help me with my learning curve.

  • Need help with Adobe Premiere Elements 9 for the Windows XP PC

    Just got it today, so I could make my own video and audio files from pre-existing ones.  I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work.  There was a row for inserted video, and a row below that for inserted audio.  I'm out of college currently, and just bought Elements 9, as said, but am struggling with it.  Could someone please tutor me to get me started?  Perhaps even talk over the phone?  I'm trying to combine different video and audio tracks into a new singular video/audio file.
    Thanks in advance.
    >>
    Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
    Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
    Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
    Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
    For a list of some of the resources for learning PrE, see this ARTICLE.
    Good luck,
    Hunt
    >>
    What are Source Files?  You mean the videos I'm using?  The main one is here:
    http://www.tfarchive.com/cartoons/videoclips/bones.php
    Two to four additions to it will be used with video parts from here:
    http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
    And my first project is a .prel file.  Is that what you meant?
    Is it possible I could get assistance over the phone?
    Thanks.

    I created a more precise list of what I wish to combine to make one new video program:
    Audio:
    http://www.tfarchive.com/cartoons/videoclips/bones.php
    Transformers_S2.mpg (0:00 - 0:33) (All)
    Video:
    http://www.tfarchive.com/cartoons/videoclips/bones.php
    Transformers_S2.mpg (0:00 - 0:08)
    Fade to
    Transformers_S2.mpg (0:31 - 0:33)
    Fade to
    http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
    Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
    http://www.youtube.com/watch?v=5yd1OmZvU8w
    (1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
    http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
    trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
    http://www.youtube.com/watch?v=h23kRJ9i058
    (5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
    http://www.tfarchive.com/cartoons/videoclips/bones.php
    Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
    Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
    I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
    I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
    Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
    Thanks.

  • Help with Adobe Photoshop elements 10 download

    I have been trying for 3 days to download a copy of PSE 10. I have tried everything suggested in the forums with no luck. I even tried the direct download links and they did't work. I received a copy of PSE 10 from a promotion with EVGA. I can't understand why adobe makes it so difficult to downlaod programs. The Downlaod asistent is terriable. All I want is to downlaod the PSE 10 files. I have never had this much trouble with any product before. Adobe why not make it easier for us to try your products. If the failure in the ADA are common why not just correct that. As a share holder I am even less happy.

    For the direct download links to work you need to follow the Very Important Instructions to the literal letter.

  • I need help with adobe premiere elements 12

    I just bought premiere elements 12 and i tried to upload a video to youtube and it was longer than 15 minutes and it said it was to long to upload to youtube. I have uploaded a 22 minute video before how can i upload a longer video thanks.

    YouTube won't allow you to  upload a video that long directly from Premiere Elements.
    If you've got a modified YouTube account that allows longer videos, you can do so by manually uploading a video you output using Publish & Share/Computer/AVCHD with the YouTube HD preset.

  • I need help installing Adobe Photoshop Elements 11 I keep running into exit code 7 on Macbook Air.

    I have tried to restart Mac and I went to applications and dragged the application to the trash to uninstall and then tried again same error PLEASE HELP!!!

    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5

  • Remove Green Screen with Adobe Photoshop Elements

    Hi,
    I have setup a Green Screen in my home. I took some pictures of my wife with the Green Screen Background and want to remove the Green Screen and replace with a different background. I was able to do this via the Adobe Premiere Elements 7.0 but need help with the Photoshop Elements.
    Any help is appreciated.
    Sridhar

    FWIW, She is really easy to select on that green screen if you use a few tricks. The screen shots are in CS3 my preference but worked with Elements limitations to show you how easy she can be selected without any filters.
    My end product doesn't look as good as Mark's though. That's a tough act to follow. Thought I'd post this anyway just in case you couldn't get that filter to work in Photoshop Elements 7,
    First, make a copy of the image and desaturate it to make it black and white. I prefer using Hue/Saturation from the image menu (CTRL U) and moving desat slider down to -100. Next Invert it (CTRL I), then run levels from the image menu (CTRL L) to push the image towards pure white and black...well close. It should look something like this when these steps are done.
    Copy this image to a new layer. (Just in case something goes wrong so you don't have to repeat the last steps). Leave the copy in Normal blend mode. Grab your paint brush tool. Set the brush tool's mode to Overlay blend mode. You will use black and white paint to push dark gray to black and light gray to white. When done, it should look something like this:
    Not perfect...I did this really fast and was a bit sloppy and didn't get all of my light grays pushed to whites. Probably not a problem for the hair edges but would need to be fixed for face and body areas as this will be a mask to make the selection.
    Select mask that was just made and copy it into your clipboard. Select<All; Edit<Copy. Create and adustment layer mask that has a mask. I used the Solid Color Fill Adjustment layer. Alt click the mask of the adjustment layer you created. It will turn the document white. This is because the mask is now the focus. Now paste. Edit<Paste. This will paste the above mask into the adjustment layer mask. Now, either alt click the mask or click on another layer to remove the focus from the mask. You'll use this adjustment layer as a base to a clipping mask. See next paragraph.
    The Solid color fill layer (or whatever you picked) with your mask is going to be the base on which your selection will be built. Create a copy of your original image up above this base layer. Now, hold in the alt key and move your curser in the layers pallete to the line separating these two layers. Notice the cursor changes to an odd symbol...a solid ring and a hollow ring with an arrow. Click the palette on the line separating these two layers. (Release alt key when done.) She should now be covering the mask you created. Areas that are white in the adjustment layer mask will show the original image; areas in black in the adjustment layer mask will be transparent. (Areas that contain shades of gray would be semi-transparent...amount based on the gray's brightness value.)
    For the green cast on the edges, I removed that by using a Hue/Saturation adjustment layer to remove the green spill over. If you only wanted to effect the girl and not a new background add it to clipping mask. (Same way...alt click the line between her image and the Hue/Saturation layer.)
    Not perfect but this is what I came up with based on the above mask:

  • Need help opening Adobe Premiere Elements 11

    I purchased a package deal with Adobe Photoshop Elements 11 and Premiere Elements 11.   The photoshop portion is working fine, but I can't get the premiere to even open!   I click on the icon on my dock and nothing happens.  There is another icon on my desktop (main screen) but it only gives me an option to 'un-install'.    Is there a phone number to call for Adobe support?   I need real help!!??

    Welcome to the forum.
    As the biggest cause of PrE not launching is an obsolete video driver (PSE does not rely so heavily on the video driver), please answer these questions:
    What is the make and model of your video card/chip?
    Do you have a laptop, or desktop?
    What is the installed version of the video driver?
    Is that the latest from the nVidia, or AMD/ATI Web site? Do not trust your OS to tell if you have the latest.
    For more detail, see this article: http://forums.adobe.com/thread/948651?tstart=0
    Good luck,
    Hunt

Maybe you are looking for

  • Windows updates won't install

    Hello, I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really gi

  • Can't purchase upgrade serial number? - page not found

    I am ready to purchase an upgrade serial number, since my Ap3 trial has expired. But when I click on the "buy" button, I am taken to an Apple Store page that reads "page not found" Has anyone else seen this?? Have they removed the ability to purchase

  • How to recover my business files from a formatted removable drive?

    I need to recover my business files from my formatted drive accidentally. I know I am stupid. I am using Windows XP. It is a Toshiba 500GB external hard drive. Is there anyone that can help me to restore my files back? The inner files are really impo

  • Followed Hyperlink Color Change

    Has anyone found a way to make a followed hyperlink change color persistently so that if the original slide is revisited during a presentation the followed links are clearly delineated from the unfollowed links? Powerpoint does this nicely and I have

  • Linksys E2500 does not show any devices in DHCP client table

    Equipment: Old Westell DSL modem, still runs like a champ Linksys E2500 home built desktop running Linux 12.10 We're having intermittent WiFi.  This morning I finally sat down to do some troubleshooting.  SOP for me is to reset both the modem and the