Need help with an index creation

Hi,
Oracle 8.0.6,
Win 2000 server
SELECT PT_CODE,BUS_UNIT,TOP_BRASS_YN,ROOM_CLASS_CODE,WARD_CODE,
ADMIT_STATUS_FLAG,PT_ADMIT_DATE,PT_ADMIT_TIME,MD_CODE,REQUEST_NO,REG_NO,
INP_REG_NO,MOTHER_PT_CODE,CRE_NOTES,PT_DIAGNOSIS_NOTE,
TMP_CLINIC_DISCHARGE_DATE,ROOM_CODE,BED_CODE,ROWID
FROM
A_INP_PATIENTS_ADMT WHERE bus_unit = :1 and admit_status_flag = 'C' and
nvl(clinical_discharge_yn,'N') not in ('Y','C') and (ward_code = :2 or :3 =
'007') order by room_code
call count cpu elapsed disk query current rows
Parse 1 0.00 0.03 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 4 0.14 26.61 2306 47604 0 33
total 6 0.14 26.64 2306 47604 0 33
I want to create a function based index on column nvl(clinical_discharge_yn,'N').
I issued the following command,
create index new_index on A_INP_PATIENTS_ADMT (bus_unit, admit_status_flag, nvl(clinical_discharge_yn,'N'), ward_code)
But i am getting the error ORA-00907:missing right parenthesis.
Could you plss tell me where am i missing the parenthesis
Best Regards,

If I remember correctly function-based indexes weren't introduced until the 8.1.x versions of Oracle.

Similar Messages

Need help with complex column creation command

Hello, all
I need help with a complex column creation command and SQL anywhere help is not sufficient for it.
Here is the situation:
I need to write a generic DDL "alter table" command, which can add/modify columns without knowing in advance if they already exist in the destination table.
Is there a command, which looks like:
alter table "table1" add (on existing modify) column1 <datatype> <default> ?
Thank you,
Arcady

Hi.
I don't think this is supported in alter table command. But you can code that inside an if statement which queries systables & syscolumns. Your code should be something like that:
if (select count(*) from sysobjects, syscolumns where sysobjects.id = syscolumns.id and sysobjects.name = 'some_table' and syscolumns.name = 'some_column') < 1
begin
alter table some_table add some_column numeric(12) not null
end
This is an example..
Andreas.

Need help with File system creation fro Oracle DB installation

Hello,
I am new to Solaris/Unix system landscape. I have a Sun enterprise 450 with 18GB hard drive. It has Solaris 9 on it and no other software at this time. I am planning on adding 2 more hard drives 18gb and 36gb to accommodate Oracle DB.
Recently I went through the Solaris Intermediate Sys admin training, knows the basic stuff but not fully confident to carry out the task on my own.
I would appreciate some one can help me with the sequence of steps that I need perform to
1. recognize the new hard drives in the system,
2. format,
3. partition. What is the normal strategy for partitioning? My current thinking is to have 36+18gb drives as data drives. This is where I am little bit lost. Can I make a entire 36GB drive as 1 slice for data, I am not quite sure how this is done in the real life, need your help.
4. creating the file system to store the database files.
Any help would be appreciated.

Hello,
Here is the rough idea for HA from my experience.
The important thing is that the binaries required to run SAP
are to be accessible before and after switchover.
In terms of this file system doesn't matter.
But SAP may recommend certain filesystem on linux
please refer to SAP installation guide.
I always use reiserfs or ext3fs.
For soft link I recommend you to refer SAP installation guide.
In your configuration the files related to SCS and DB is the key.
Again those files are to be accessible both from hostA and from hostB.
Easiest way is to use share these files like NFS or other shared file system
so that both nodes can access to these files.
And let the clustering software do mount and unmount those directory.
DB binaries, data and log are to be placed in shared storage subsystem.
(ex. /oracle/*)
SAP binaries, profiles and so on to be placed in shared storage as well.
(ex. /sapmnt/*)
You may want to place the binaries into local disk to make sure the binaries
are always accessible on OS level, even in the connection to storage subsystem
losts.
In this case you have to sync the binaries on both nodes manually.
Easiest way is just put on shared storage and mount them!
Furthermore you can use sapcpe function to sync necessary binaries
from /sapmnt to /usr/sap/<SID>.
For your last question /sapmnt should be located in storage subsystem
and not let the storage down!

Need Help with INSERTS & INDEXES

Let me try explaining my scenario and then my confusion:
Scenario:
Parent_table
Child_table
Both Parent_table & Child_table have Indexes and Constraints.
Confusion:
If I remove all Indexes and Constraints, my INSERTS are 10 times faster. Howevere I am taking a chance of:
1. Loosing Referential Integrity (No Parent row for a Child Row).
2. Storing Duplicate data.
The chnaces of either one of this happening is rare, but it is a definite possiblility.
I am trying to find some articles that will give me some guidance on how this should be done right. Such that I can disable certain Indexes, so that the existing data can be queried without any problems and the new data is Indexed after the load.
Any help will be appreciated.
-- Thanks

Maintaining indexes certainly requires some additional overhead during inserts. Generally, though, you've got indexes in place to allow you to query data at an acceptable speed. Presumably, when you remove all your indexes, all your reporting/ OLTP applications will crawl to a halt.
What are the indexes you have on these tables and why do those indexes exist? Frequently, you'll find that you may have indexes that are useless either because they are essentially duplicated by other indexes or because they are indexing attributes that don't benefit from having indexes. If 90% of your insert time is being spent updating indexes, that certainly seems like a possibility here...
Justin

I need help with event structure. I am trying to feed the index of the array, the index can vary from 0 to 7. Based on the logic ouput of a comparison, the index buffer should increment ?

I need help with event structure.
I am trying to feed the index of the array, the index number can vary from 0 to 7.
Based on the logic ouput of a comparison, the index buffer should increment
or decrement every time the output of comparsion changes(event change). I guess I need to use event structure?
(My event code doesn't execute when there is an event at its input /comparator changes its boolean state.
Anyone coded on similar lines? Any ideas appreciated.
Thanks in advance!

You don't need an Event Structure, a simple State Machine would be more appropriate.
There are many examples of State Machines within this forum.
RayR

I need help with shooting in my flash game for University

Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
    //declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
    minesInGame = 15;
    //create a timer fires every second
    mineMaker = new Timer(6000, minesInGame);
    //tell timer to listen for Timer event
    mineMaker.addEventListener(TimerEvent.TIMER, createMine);
    //start the timer
    mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
    evt.target.x -= Math.random()*5;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseMine();
    //declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
    atmInGame = 15;
    //create a timer fires every second
    atmMaker = new Timer(8000, minesInGame);
    //tell timer to listen for Timer event
    atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
    //start the timer
    atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
    evt.target.x -= Math.random()*10;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
    bg_mc.x -=10;
function moveBackward():void{
    bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
    //makes the tank move by 10 pixels right
    if (evt.keyCode==Keyboard.D)
    tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(tankMine_mc);
    //var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
    //Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
    cTime ++;
} else {
    //if it has, then allow the user to shoot
    shootAllow = true;
    //and reset cTime
    cTime = 0;
function updateHealthBar():void
    percentHP = currentHP / maxHP;
    healthBar.barColor.scaleX = percentHP;
    if(currentHP <= 0)
        currentHP = 0;
        trace("Game Over");
    updateHealthBar();

USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key

Need help with Template - unbalanced #EndEditable tag

I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
If I open the file independently it looks great - otherwise I get the error.
Code for internal_students.dwt
There is an error at line 45, column 79 (absolute position 2188)
<div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
I need help with this as the site and templates were created 2/3 years before I arrived on the job.
Thank you
Cheryl

Okay
- This is on-line page http://caite.cs.umass.edu/students/index.html
If you want code from template here it is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />

<title>CAITE - Commonwealth Alliance for Information Technology Education</title>


<meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
<meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
<meta name="robots" content="all, index, follow" />
<meta name="revisit-after" content="14 days" />
<meta name="author" content="Outreach Web Team" />

<link rel="shortcut icon" href="/images/favicon.ico" />
<script type="text/javascript" src="../scripts/jquery.js"></script>
<script type="text/javascript" src="../scripts/jquery.easing.js"></script>
<script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
<script language="JavaScript" type="text/JavaScript">
    
</script>
<link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
</head>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<body>
    <div id="wrapper">
        <div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
                
            </div>
       </div>
        <div id="wrapper_l">
            <div id="wrapper_r">
                  <div id="innerwrapper">
                    <div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
                    <div id="internalBanner">
                      <div class="students-banner">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
                            <td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
                                <div id="internalQuote-inner">
                                  <p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
                              </div>
                            </div></td>
                          </tr>
                        </table>
                    </div>
                    </div> 
                    <div id="internalContent">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="317" align="left" valign="top" id="secondary-content">
                              
                              <h3><a href="../students/index.html">For Students</a></h3>
                              <div id="secondaryNav">
                                <ul>
                                  <li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
                                </ul>
</div>
                            </td>
                            <td align="left" valign="top" id="contentCell">
                              <h1>For Students</h1>
                              <p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
                              <p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
                              <p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
                              <p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
                              <p> </p>
                            </td>
                          </tr>
                      </table>
                    </div>
                    <div id="alliances">
                          <table width="100%" border="0" cellpadding="0" cellspacing="0">
                            <tr>
                              <td height="30" align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
                            </tr>
                            <tr>
                              <td align="center" valign="middle"><p>
<table border="0" cellpadding="2" cellspacing="0">
                                <tr>
                                  <td width="35" align="center" valign="middle"> </td>
                                  <td align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50" border="0 /"></a></td>
                                  <td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
                                  <td align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p>                                  </td>
                                  <td align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
</tr>
                              </table>
</td>
                            </tr>
                      </table>
                    </div>
                </div> 
            </div>
        </div>
        <div id="bottom">
            <div id="bottom_l">
                <div id="bottom_r"> </div>
            </div>
        </div> 
    </div>
    <div id="copyright">
<p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
© copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
<font color="#666666"><br>
</font>
<p><font color="#666666" size=2> This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
</div>

<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-7435501-1");
pageTracker._trackPageview();
} catch(err) {}</script>
    </body>
</html>

I need Help with a website I've created

I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>The Lighthouse Church</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv12 {
    position:absolute;
    width:295px;
    height:23px;
    z-index:4;
    left: 198px;
    top: 1px;
#apDiv13 {
    position:absolute;
    width:135px;
    height:22px;
    z-index:5;
    left: 1001px;
    top: 3px;
#apDiv14 {
    position:absolute;
    width:309px;
    height:992px;
    z-index:1;
    left: 33px;
    top: 479px;
#apDiv15 {
    position:absolute;
    width:327px;
    height:999px;
    z-index:1;
    left: 324px;
#apDiv16 {
    position:absolute;
    width:262px;
    height:1000px;
    z-index:2;
    left: 674px;
    top: 477px;
#apDiv17 {
    position:absolute;
    width:85px;
    height:34px;
    z-index:1;
    left: -379px;
    top: 1001px;
#apDiv18 {
    position:absolute;
    width:200px;
    height:115px;
    z-index:6;
#apDiv19 {
    position:absolute;
    width:168px;
    height:31px;
    z-index:3;
    left: 448px;
    top: 1451px;
#apDiv20 {
    position:absolute;
    width:94px;
    height:33px;
    z-index:3;
    left: 384px;
    top: 1477px;
body {
    background-color: #000;
    margin-left: 0px;
    margin-right: 0px;
#apDiv21 {
    position:absolute;
    width:920px;
    height:200px;
    z-index:4;
    left: 19px;
    top: 233px;
</style>
</head>
<body>
<div class="container">
<div class="content">
    <div id="apDiv5">
      <div id="apDiv16">
        <div id="apDiv17">
          <map name="Map2" id="Map2">
            <area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
          </map>
          <img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
          <map name="Map" id="Map">
            <area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
          </map>
        </div>
      </div>
      <div id="apDiv21">
        <blockquote>
          <blockquote>
            <blockquote>
              <blockquote>
                <blockquote>
                  <blockquote>
                    <p><img src="faithexplosion.png" width="314" height="225" /></p>
                  </blockquote>
                </blockquote>
              </blockquote>
            </blockquote>
          </blockquote>
        </blockquote>
      </div>
      <div id="apDiv14">
        <div id="apDiv15">
          <div>
            <div>
              <p> Special Message from Perry Stone </p>
              <h2> Was Jesus Born on December 25?</h2>
              <p> 12/20/2010 </p>
              <p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
              <p>Last   year, in response to the growing number of Christians who celebrate   Hanukkah but hate Christmas, I wrote an article for this website titled   “Hanukkah or Christmas?” I explained why I think Jesus was either   conceived or birthed on December 25.</p>
            </div>
          </div>
          <div>
            <div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
              <p> Prophecy Update </p>
              <h2> What Happened to Global Warming?</h2>
              <p> 12/17/2010 </p>
              <p> </p>
            </div>
          </div>
          <div>
            <div></div>
          </div>
          <div>
            <div></div>
          </div>
        </div>
        <div>
          <p><font size="2">Special Word</font></p>
          <p><font size="2">January 7th, 2011</font></p>
          <p> <font size="2">Dear Viewers:</font></p>
          <p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious            times in church history. Many things are coming upon the world and also upon the church and we (the church) must be totally            prepared to take up our cross daily and venture out into the lost and</font></p>
          <p> <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
        </div>
        <p> </p>
        <div></div>
        <div>
        </div>
        <div></div>
        <p> </p>
      </div>
      <img src="lighthousegraphic2.jpg" width="960" height="1509" />
      <div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
        <map name="Map3" id="Map3">
        <area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
      </map>
</div>
    </div>
<p> </p>
</div>
</div>
<div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
<div id="apDiv11">
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="#">Home</a>    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
      <ul>
        <li><a href="#">Fresh Word</a></li>
        <li><a href="#">Itinerary</a></li>
        <li><a href="#">Prophetic Word</a></li>
        <li><a href="#">Sermons</a></li>
        <li><a href="#">Special Words</a></li>
        <li><a href="#">Word of Month</a></li>
      </ul>
    </li>
    <li><a href="#">Men Ministry</a></li>
    <li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
      <ul>
        <li><a href="#">Chris Gore</a></li>
</ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
      <ul>
        <li><a href="#">Contact Us</a></li>
        <li><a href="#">Donate</a></li>
        <li><a href="#">Events</a></li>
        <li><a href="#">Our Store</a></li>
        <li><a href="#">Prayer Request</a></li>
        <li><a href="#">Salvation</a></li>
        <li><a href="#">Subscribe</a></li>
        <li><a href="#">Vision</a></li>
        <li><a href="#">We Believe</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Resources</a>
      <ul>
        <li><a href="#">Prepare for Disaster</a></li>
        <li><a href="#">How to Fast</a></li>
        <li><a href="#">Heaven & Hell</a></li>
        <li><a href="#">Warfare Prayers</a></li>
        <li><a href="#">Wisdom Words</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
      <ul>
        <li><a href="#">Article Archive</a></li>
        <li><a href="#">Audio Prophecies</a></li>
        <li><a href="#">Color for Year</a></li>
        <li><a href="#">Major Articles</a></li>
        <li><a href="#">Prophecy Archive</a></li>
        <li><a href="#">Prophetic Articles</a></li>
        <li><a href="#">Word for Year</a></li>
      </ul>
    </li>
</ul>
</div>
<div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
<div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

Need help with Berkeley XML DB Performance

We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
          XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
          xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
     XmlIndexSpecification spec = container.getIndexSpecification();
     // ids
     spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // index to cover AttributeValue/Description
     spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
     // cover AttributeValue/@value
     spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // item attribute values
     spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // default index
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // save the spec to the container
     XmlUpdateContext uc = xmlManager.createUpdateContext();
     container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
     No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]

Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query     { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Need help with my usecase based on transient ViewObject

I am using 11.1.1.4.0 Jdev version. I need help with my usecase.Been trying it for 2 days but couldn't figure out the issue.
I have a transientVO . In this VO Rows will be populated programmatically. CountryId is an attribute of this VO. I have created a viewAccessor "CountriesVA" from Country VO of HR schema.
I have a LOV for the countryId which is based on this VA ,getting countries from CountryTable.
This is the model part which works fine.
Before the page load i have called a method to create a row for this transientVO.Once the row is created i can see the SOC in my page which i have created as below.
Now i want to insert a row in the transientVO if user selects a country and restrict duplicate entry . (As One row is already created 1st time there will be no rows created.after that rows will be inserted)
The issue is :: Suppose there are 2 countries. A & B .When user does the following actions :
Insert A . Done //as 1st entry
Insert B . Done //as 1st time entry
Insert A . duplicate not inserted
Insert B . getting inserted // the bug.
<af:selectOneChoice value="#{bindings.CountryId.inputValue}"
                        label="#{bindings.CountryId.label}"
                        required="#{bindings.CountryId.hints.mandatory}"
                        shortDesc="#{bindings.CountryId.hints.tooltip}" id="soc1"
                        immediate="true" autoSubmit="true"
                        valueChangeListener="#{pageFlowScope.managedBean.countryIdVC}">
    public void countryIdVC(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        String oldValue=null;
          setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
          if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
         oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
                setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
        String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
         //access the underlying RowSetIterator
         RowSetIterator rsi = dciter.getRowSetIterator();
      boolean duplicate=true;
      if(oldValue!=null){
                rsi.getCurrentRow().setAttribute("CountryId", oldValue);
    // Row row= rsi.findByKey(new Key(new Object[] { newValue}), 1)[0];
      Key key =new Key(new Object[] { newValue});
      Row row=rsi.getRow(key);
      if(row==null){
      System.err.println(duplicate);
        duplicate=false;
      }else{
        rsi.setCurrentRow(row);
         if(!duplicate){
         //get handle to the last row
         Row lastRow = rsi.last();
         //obtain the index of the last row
         int lastRowIndex = rsi.getRangeIndexOf(lastRow);
         //create a new row
         Row newRow = rsi.createRow();
         newRow.setAttribute("CountryId", newValue);
         //initialize the row
         newRow.setNewRowState(Row.STATUS_INITIALIZED);
         //add row to last index + 1 so it becomes last in the range set
         rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
         //make row the current row so it is displayed correctly
         rsi.setCurrentRow(newRow);

I read the reply from Andrejus Baranovskis and thought of studying and implementing that in my useCase.Well it worked . I implemented the same Logic but rowIteration was done in AppModule.
Con-Fusion, Bugs, Facts &amp; Workarounds: Iterating through View Object RowIterator Bug.(NOT ADF BUG, Development B…
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcservices.htm#sm0206
9.7.6 What You May Need to Know About Programmatic Row Set Iteration
The problem is solved ,the above links helped me solve the problem.
what i did is i have created a method in appmodule to iterate rows and all the method y operation bindings and my logic works fine ....
MY Advice to all Adf developers ,though i am not an expert but i can assure you to follow the above process for rowIteration.If you use the iterator binding in the manage bean to navigate the rows u'll face issues which are unexpected.
In AppModule :::::
    public boolean createRow(String oldValue,String newValue){
     System.err.println(oldValue+""+newValue);
      ViewObjectImpl vo=getViewObj1();
      boolean duplicate=false;
      if(oldValue!=null){
      RowSetIterator iter = vo.createRowSetIterator(null);
      System.err.println("iterating rows ");
         while (iter.hasNext()) {
             Row r = iter.next();
             System.err.println(iter.getRangeIndexOf(r)+" row is "+r.getAttribute("CountryId"));
             if(r.getAttribute("CountryId").toString().equals(newValue)){
                 duplicate=true;
                 break;
             // Do something with the current row.
         // close secondary row set iterator
         iter.closeRowSetIterator();
      return duplicate;
In ManageBean :::::
    public void countryIdVC(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        String oldValue=null;
       System.err.println("Old Value"+valueChangeEvent.getOldValue());
          setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
          if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
         oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
                setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
        String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         //access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
         //in this sample
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
         //access the underlying RowSetIterator
         RowSetIterator rsi = dciter.getRowSetIterator();
         if(oldValue!=null){
                      rsi.getCurrentRow().setAttribute("CountryId", oldValue);
           OperationBinding operation = bindings.getOperationBinding("createRow");
           operation.getParamsMap().put("oldValue", oldValue);
           operation.getParamsMap().put("newValue", newValue);
      if(!(Boolean)operation.execute()){
      //get handle to the last row
      Row lastRow = rsi.last();
      //obtain the index of the last row
      int lastRowIndex = rsi.getRangeIndexOf(lastRow);
      //create a new row
      Row newRow = rsi.createRow();
      newRow.setAttribute("CountryId", newValue);
      //initialize the row
      newRow.setNewRowState(Row.STATUS_INITIALIZED);
      //add row to last index + 1 so it becomes last in the range set
      System.err.println("Inserting row at index "+lastRowIndex+1);
      rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
      //make row the current row so it is displayed correctly
      rsi.setCurrentRow(newRow);
      else{
        System.err.println("Data found So not inserting,only setting current Row");
      Key key =new Key(new Object[] { newValue});
        rsi.setCurrentRow(rsi.getRow(key));

Need help with interface development

Hi i need help with requirement below with developing interface between or online order system and sap plz lemme know what is bapi i use for creating customer, update and assigining partner id to costumer.
SAP Development
1.     Using standards SAP functional module (with BAPI), create interface that will create/change Ordering party customer in SAP. Following fields are mandatory for customer creation:
     MANDT     Client
     VKORG     Sales organization
     VTWEG     Distribution Channel
     SPART     Division
     KDGRP     Customer Group (= ZORP)
     KUNNR     Customer number
     NAME1     Name 1
     NAME 2     Name 2 (if required)
     SORTL     Search term (short description)
     ZZALTKN     Search term 2 (old customer number)
     LAND1     Country
     ORT01     City
     PSTLZ      Zip Code
     REGIO      Region (state in USA)
     STRAS     Street
     TELF1     Primary telephone number
     TELFX     Primary Fax number
     ZZPRPLANS     Payment Plan
     CCINS     Payment card: Card type
     CCNUM     Payment cards: Card number
     CCDEF     Payment Card: Default Card Indicator
     ZBDGID     Customer Budget ID
     ZHOLD     Budget Hold indicator
     ZZCOSTCENT     Cost Center
2.     Upon successful customer creation system will issues S (success) message that customer has been created.
3.     New ordering party customer created in step ½, will have to be assigned as new partner to its belonging Sold-to/Ship-to customer. Use standard SAP customer functional module in order to perform this partner ID assignment. Partner ID for ordering party should be ZO.
1.7     Enhancement Functionality
Apart from creating a new interface to do the required functionality, the Order Create Interface also has to be changed to accommodate a field to pass the Ordering Party Number on the Order. The technicalities of how we are going to implement the interface will be laid out in the Tech Specs.
Thanks
in advance

You have double posted, please mark this one as "solved on my own" and refer to this thread
need help with interface development
Regards,
Rich Heilman

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param      name="bgcolor"      value="ffffff">
<param      name="bheight"      value="10">
<param      name="bwidth"      value="10">
<param      name="delay"      value="1000">
<param      name="fontname"      value="TimesRoman">
<param      name="fontsize"      value="14">
<param      name="link"      value="http://java.sun.com/events/jibe/index.html">
<param      name="number"      value="3">
<param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param      name="space"      value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

Need help with a simple program (should be simple anyway)

I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
     public void actionPerformed(ActionEvent evt) {
     text1.setText(" ");
     text2.setText("RE: ");
     text3.setText(" ");
     public Message() {
     super("Write a Message - by Kieran Hannigan");
     setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     setSize(370,270);
     FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
     setLayout(flo);
     //Make the bar
     JMenuBar bar = new JMenuBar();
     //Make "File" on Menu
     JMenu File = new JMenu("File");
     JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
     JMenuItem f2 = new JMenuItem("Open");
     JMenuItem f3 = new JMenuItem("Save");
     JMenuItem f4 = new JMenuItem("Save As");
     JMenuItem f5 = new JMenuItem("Exit");
     File.add(f1);
     File.add(f2);
     File.add(f3);
     File.add(f4);
     File.add(f5);
     bar.add(File);
     //Make "Edit" on menu
     JMenu Edit = new JMenu("Edit");
     JMenuItem e1 = new JMenuItem("Cut");
     JMenuItem e2 = new JMenuItem("Paste");
     JMenuItem e3 = new JMenuItem("Copy");
     JMenuItem e4 = new JMenuItem("Repeat");
     JMenuItem e5 = new JMenuItem("Undo");
     Edit.add(e5);
     Edit.add(e4);
     Edit.add(e1);
     Edit.add(e3);
     Edit.add(e2);
     bar.add(Edit);
     //Make "View" on menu
     JMenu View = new JMenu("View");
     JMenuItem v1 = new JMenuItem("Bold");
     JMenuItem v2 = new JMenuItem("Italic");
     JMenuItem v3 = new JMenuItem("Normal");
     JMenuItem v4 = new JMenuItem("Bold-Italic");
     View.add(v1);
     View.add(v2);
     View.add(v3);
     View.addSeparator();
     View.add(v4);
     bar.add(View);
     //Make "Help" on menu
     JMenu Help = new JMenu("Help");
     JMenuItem h1 = new JMenuItem("Help Online");
     JMenuItem h2 = new JMenuItem("E-mail Programmer");
     Help.add(h1);
     Help.add(h2);
     bar.add(Help);
     setJMenuBar(bar);
     //Make Contents of window.
     //Make "Subject" text field
     JPanel row2 = new JPanel();
     JLabel sublabel = new JLabel("Subject:");
     row2.add(sublabel);
     JTextField text2 = new JTextField("RE:",24);
     row2.add(text2);
     //Make "To" text field
     JPanel row1 = new JPanel();
     JLabel tolabel = new JLabel("To:");
     row1.add(tolabel);
     JTextField text1 = new JTextField(24);
     row1.add(text1);
     //Make "Message" text area
     JPanel row3 = new JPanel();
     JLabel Meslabel = new JLabel("Message:");
     row3.add(Meslabel);
     JTextArea text3 = new JTextArea(6,22);
     messagearea.setLineWrap(true);
     messagearea.setWrapStyleWord(true);
     JScrollPane scroll = new JScrollPane(text3,
                              JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
                              JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     //SpaceLine
     JPanel spaceline = new JPanel();
     JLabel spacer = new JLabel(" ");
     spaceline.add(spacer);
     row3.add(scroll);
     add(row1);
     add(row2);
     add(spaceline);
     add(spaceline);
     add(row3);
     setVisible(true);
     public static void main(String[] arguments) {
     Message Message = new Message();
}

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Need help with an index creation

Similar Messages

Maybe you are looking for