Need Help With Back Camera

My back camera and flashlight does not work anymore for my iPod 5th gen. I have tried everything besides a factory restart. I have restarted it several times and restarted the software. Please help it's annoying me. Thanks

- Restore to factory settings/new iOS device.                       
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar

Similar Messages

  • TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

    I need help with my camera it's shows a black screen. And I have restarted it many times

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
    Apple Retail Store - Genius Bar                                      

  • Need help with backed up photos-now cannot view..?

    Using iphoto 6, super duper, seagate external hd. Drive has already been set-up and backed up several times-been working well........until.......
    Last night, I saw that out of 120gb I have about 5gb left on my G4.!
    "decided" to back-up iphotos and "delete" some on my G4 to reserve more space.
    Now, if I go to the external and click on pictures folder, I can see all of my originals folders (2002-2008), but when I open iphoto, they are not in iphoto.?
    On my G4, it's the same thing, but worse! When I tried to delete my photos, I was holding the apple key and selecting multiple items, then dragging them to the trash.......I'm sure you have done this yourself before, but It drug them a little, then them "dropped" into other places in the same folder-NOT the trash! They are in all different places in the pictures folder, and not in the same places they used to be......!!!
    I've read about "re-constructing" the library. Will this work? I do not want to do any more damage. They are there-I know it!
    So, I drug the entire library of "originals" back into iphoto, but ALMOST all of the way through (got down to 100 out of 8,000 photos) and got a message that says "an error occured while trying to save your iphoto library. Make sure you have enough hard disk space and that iphoto is able to access the iphoto library folder."
    I look at my hd space, and I have about 500mb left....?
    What does this mean? I THINK I don't have enough hd space to do it now. What the **** should I do? Getting a little frustrated at this point. I am off tomorrow and want to get it fixed up.
    8,000 of my childrens photos is nothing to "play" with. I can't believe I was so stupid with these. These mean the world to me, and I'm pretty sure they are still there. Obviously they are because about 60gb of hd space is being used up with my photos according to the program "what size?" I downloaded to use.
    Where to start?
    First, thanks for reading this, and second---could someone help me out some?
    Could someone please post a link to help me to correctly partition the seagate external hd, and get these photos backed up?
    Also, what is the best way to free up my hd space on my G4? I also have a mini with 60gb of storage if I need additional hd space. In addition, I have an iphone, itouch, imac, 3 nanos, ipod hi-fi,,,,,,,Obviously, I LOVE my Apple products, but don't have enough knowledge to operate them.....kinda sad, huh?

    This is the iPhoto '08 forum (version 7.x.x) and you may very well get incorrect answers to questions about other versions - it would be better to post in the iPhoto 6 forum - http://discussions.apple.com/forum.jspa?forumID=1116
    LN

  • Novice needs help with multi-cam

    Hi, I've got 3 cameras and a seperate audio track synched in my timeline. (CC Premiere Pro 6 on a PC with - unfortunately, Windows 8) The cameras didn't all start at the same time but no problem the clips are where they need to be now. I've made several edits getting rid of stuff I don't need, and I've added a title, end note, and a few stills. All the tutorials I've watched deal with starting clips at the beginning but I can't seem to find one that shows what to do with a bunch of things already in the timeline where they need to be. Here's a screen shot if that helps to explain what I've done so far.I've tried nesting the clips and dragging that into the source panel, but no luck. Obviously, I'm missing something here (this is my very first project) hope someone can help.

    Yes, what Jim said...
    or if you really want to leave all your little stills and titles there and not have to add them later then alt+select all the video clips only and right click>nest. You can select all the audio clips too but I usually leave them there so I can see them all individually (personal preference) and I never have audio follow video in my edits so it's not necessary. Then right click>Multicam>Enable and proceed with #3 from Jim's list. I actually prefer to ignore the wrench and add that one touch little multicam toggle icon to the program monitor which it appears you've already done so you just need to select the far right icon on the bottom of your program window next to the little camera icon. That's the multicam toggle. Multicam cutting now takes place in the Program Window instead of the Source Window like it was in CS6. Oh also, the little "tweaks" that Jim mentioned can be easily done with the Rolling Edit Tool (Shortcut: N) You'll see. Good luck!

  • Need help with foscam cameras connecting to AirPort Extreme N

    Greetings,
    I could really use some help from the AirPort gurus! I have an AirPort Extreme N base station, with firmware 7.4.2. I purchased a couple of Foscam FI8908W pan and tilt cameras. I am trying to get them to work on my home network, but cannot figure it out. Personally I think it might have something to do with port forwarding, but hec I just don't know. I have tried searching for answers, but came up empty. Here is a copy of the manual for anyone if interested <http://idisk.mac.com/wheelchairguy-Public>. I have been using VMware with XP to try and setup the camera, but the camera is not found with the IP Cam setup software. I thought I might be able to directly connect to my computer with an Ethernet cable, but no go there either. Also no go with an ethernet cable plugged to the camera into the base station. I just have no idea where or what I am doing wrong. If anyone can help me, I would be very grateful.
    Thanks,
    Mark

    Hi OneCog,
    We're also have broadband connected to TimeWarner. When I first got the camera I tried the same thing and had the same problem. I never read the docs and assume plug and play. So I just plugged the ethernet cable from my laptop to the camera directly and of course my laptop was connected wirelessly to the internet. It doesn't work that easily and don't worry about the cable modem, you never have to touch it's settings.
    I went to the http://foscam.us website and found these instructions that actually worked:
    Foscam IP Camera Instructions
    Software Insallation:
    Install from the Cd the IPCamSetup.exe file OR
    Or download the IPcamsetup.exe file from the website Foscam.us
    a) Go to the website Foscam.us
    b) Click the tool & support section (top middle section)
    c) Click on Download IP Camera Tools (for FI8908W or FI8904W)
    d) Click on IPCamSetup.rar (bottom left corner)
    e) Click on IPCamSetup.exe
    You should now have an IP Camera Tools Icon
    Hardware Installation:
    Plug the Ethernet network cable(grey wire) into the camera then into the router
    Plug the power adapter (black wire)into the camera and then into the power outlet
    Opening the Camera:
    Once` plugged in correctly, double click on the icon IP Camera Tools
    The Camera’s IP address will appear, double click on it to open the camera
    (If “subnet doesn’t match” appears , double click on it and check the box ’Obtain IP from DHCP server’ then click on OK)
    Login to the Camera:
    User: admin
    Password: (leave it blank)
    Click Login button
    NOTE: Press the first Login button if using internet Explorer or other browsers OR
    Press the second Login button if using Firefox, o r Google Chrome
    Test to see if working:
    Click on “Live Video”
    Connecting Camera to Wireless:
    Type your router Ip address unto your browser( press enter)
    (Don’t know your router IP address? SEE: Finding your router IP address)
    You may have to login or give your password. Do so.
    Under the word Wireless(on left) find ‘Channel and SSID’
    Click on ‘Channel and SSID’ write down(on paper) the SSID name
    Click on ‘Security” and write down Security type, Authentication, Encryption Technique and Pre-shared Key information
    Login back to the camera
    Double click on Ip camera tools
    Double click on camera’s Ip address
    User: admin
    Password: ( leave blank)
    Click the correct Login button for your browser
    Click on ‘Device Management’or ‘For Administrator’
    Click on ‘Wireless Lan Settings’
    Type in your SSID, Authentication Encryption technique and Pre-shared key info that you wrote down
    Press Submit
    Then wait 30 seconds
    Disconnect ethernnet network cable from the camera
    Disconnect the power plug from the camera
    Reconnect the power plug to the camera ( do not reconnect the network cable wire)
    wait till camera stops moving
    Login back to the camera
    a)Double click on Ip camera tools
    b)Double click on camera’s Ip address
    c)User: admin
    d)Password: ( leave blank)
    e)Click the correct Login button for your browser
    15. Chec k to see if camera is working by clicking on to ‘Live video’
    Connecting your Camera to the Internet
    Write down the local IP address of your camera
    (To find this address open IP Camera Tools)( it will display the IP address of the camera as htpp://[YourCamerasLocalIPAddress])
    Write down your router’s external internet IP address
    ( The easiest way to find this would be to Google “What is my IP address” and go to the first link which pops up and that is usually whatismyipaddress.com)
    Log in to your wireless router
    To do this you must enter the IP address of your router into your browser(enter)
    and then enter the username and password when prompted.
    ( If you are unsure of the ip address or username and password of your router, SEE Finding your Router IP Address )
    Directing incoming connections on your external IP address to your cameras local IP address
    a)Go through the options( on left side) find ‘DMZ’
    b)Click on DMZ
    c)set the DMZ IP address (also called “private”/”local” IP address”) to your cameras
    local IP address(by changing the last component of the number to the last or last
    two digits of your cameras IP address)
    d)Select enable option
    e)Save by clicking ‘Apply Changes’
    OR If you have more than one camera
    a)click on “Virtual Server” or “Port Forwarding”
    b) set the inbound port to 80 and the outbound port to 80
    c) Save by clicking ‘Apply Changes’
    Test it to see if you set it up correctly
    open a browser and enter your external internet ip address into the address bar and press enter
    You should arrive at your camera’s login screen if you successfully connected the camera to the internet
    NOTE: Please keep in mind that the camera’s IP address and the Internet’s external IP address can change at any time. Check and make sure that the IP addresses haven’t changed. If they have changed, use the new IP addresses.
    Finding Your Routers IP Address: (Internal)
    Refer to your router’s manual OR
    Retrieve your Routers Ip Address from Ip Camera Tool software
    Double Click on your IP Camera Tool Icon
    Then left click once on your Camera’s IP address
    Right click on it and choose ‘Network Configuration’
    The ‘Gateway’ number is your router Ip address ( write it down) OR
    view a list of default router IP addresses, usernames and passwords
    by Google searching “default router IP addresses”
    and clicking on the PDF titled “List of default Router Admin Passwords and Default Router IP” at: http://www.answersthatwork.com/DownloadArea/ATW_Library/Networking/Network__4-List_of_default_Router_Admin_Passwords_an d_IPaddresses.pdf
    Go to ‘find’ and type in the brand name of your router (press enter)
    Write down your routers IP address
    Message was edited by: dollarbrand

  • They stole my hard drive with my original pictures, need help with back up

    Someone stole my hard drive in my bag with the pictures I use with Lightroom. I have a clean backup of my original until November last year : the folder is similar of the folder I use in LR. But for the rest, I have a back up of the original pictures in my mac, but I think it's bit messy, because after that I deleted and move and renemae some picture in LR, and I didn't sync the back up folder. The folder is just a back up when I imported my picture in LR for the first time. So, I'm afraid LR won't find all the pictures. I don't really know how to explain better. But I will apreciate some help before started, and I don't want to mess it up. What can I do to find my LR back?

    One way to approach this is to reinstate the backup you have as of November, then Import the images since then as a new import (as you'd be using the .lrcat from November, so it won't see any of the more recent as duplicate]. Of course, no edits nor keywords will be associated with those more recent photos, but this might be the way to assure you pick up everything since then.
    Sorry about you bad news/luck on the theft. Bummer.
    [Edited for type face improvement at precisely 12:55:09 PM on Monday, June 15, 2009, PDT]

  • I need help with Backing up Music

    I need to back up my songs because I got an error message telling me to uninstall and reinstall I-Tunes.  However, when I tried to back up my files on CD's it didn't work right.  Some of the music was garbled........Am I doing something wrong?  Should I choose Audio CD or MP3 CD or Data DVD?   My goal is to make sure I save my music to reinstall on the new version of I-Tunes but, it would be nice to be able to play the CD's in my stereo as well.  Thanks for any help that I receive!    

    I meant to add that - Back up disc is not anywhere in the Files sections, not under LIbrary, nowhere.

  • Need help with back up and restore!

    I need to sync my ipad with my new Mini, so I backed it up to it and then selected sync with this computer and restore from back up. Now my pics and email are there but all my apps are not. How do I get my apps and app data back? Stupid Apple support told me to do it this way and all my stuff would go right back on it.

    Are the apps on your computer's iTunes ? If not, then as long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519 . You could then try restoring to your backup and see if that restores them and their settings/content - a backup doesn't contain the actual apps, just their content/settings, so for the restore to work fully iTunes needs access to the apps so that it can restore them.

  • Need help with no camera sounds & recording in Captivate 5

    I am an experienced user of Captivate 3 & 4, but I'm having lots of problems with Captivate 5.  I am working on a Windows 7 OS and have just installed Captivate 5.  When I try to record I can't get any camera sounds, even though I have changed my preferences to show them.  Also, Captivate seems to be recording erratically, and sometimes it is catching actions, other times it isnt'  I am running the program as Administrator and I am very puzzled by this.  Normally Captivate has worked like a charm out of the box.  Now it seems to be fighting my every step of the way.  Am I missing something?
    Audio recording seems spotty too. Sometimes it works just fine, other times Captivate just hangs and doesn't really record any sound.
    Any help would be appreciated/

    Hello and welcome to the forum,
    First to be sure: did you install the patch released in December (Help, Updates...)? If not try that first of all. You can find details about the issues solved by this patch in this blog post:
    Patch for Captivate 5
    If this doesn't help, try to clear the cache (Preferences, Global).
    Perhaps (not sure) your Preferences folder has become corrupt. It so, try to find it. In Win7 normally it is a folder (Captivate 5)  in this path:
    \users\<username>\appdata\local\adob
    Maybe you will have to change the settings to make this folder visible in Explorer, by default it is in a system folder and invisible. You can delete this folder (while CP is closed) and when you restart CP a brandnew one will be created.
    Lilybiri

  • Need help with Multi-cam editing in Premiere Pro CC/7.0

    I've been using 6.0 for a while now, and had to install 7.0/cc, but now I can't find where to record multi-cam edits.  I've already lined up my clips and created a new sequence and enabled multi-cam, I just don't see the Multi-Cam Editor.  Please help!

    Hey!
    I found the record-button in the programm panel. But now it won't let me hit record. The button is disabled (see screenshot).
    What can I do about it?
    If I just hit play and then change the angles in the source window, Premiere won't record those edits. Only thing it does is it keeps the whole clip in this one angle.

  • HT204247 Need help with backing up phone.

    I need to download my photos and backup my old phone so that I can transfer everything to my new phone. I am getting a message that my storage is full.

    Hi rakishchick,
    I see that your iCloud storage is full, but you wish to be able to back up your iPhone. Here is an article about managing your iCloud storage:
    Manage your iCloud storage - Apple Support
    https://support.apple.com/en-is/HT204247
    Alternatively, you could always back up your iPhone to iTunes:
    Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
    https://support.apple.com/en-gb/HT204269
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I need help with backing up before SSD upgrade

    Hey guys!
    Im thinking about buying a SSD for my MacBook Pro mid-2012 because it is starting to run really slow. I have understood all instructions of installing the hard drive. The problem i have is figuring out how to transfer all my data from my current HDD to the SSD.
    Now to the real question(kind off), would it be possible to transfer the data by connecting the SSD via SATA-USB cable to my MacBook and then run a TimeMachine backup to the SSD?

    If you are going to use Internet Recovery to handle installing on the SSD, then the only thing you will need is an external enclosure in which to put your old HDD. You won't need to clone it. But if you need to, then use Disk Utility to clone it via the Restore option:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the original HDD.
    I also recommend any one of the following utilities for cloning and backups:
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • Need help with backing up problems with Iphone 4

    I just recently backed up my iphone because I accidently deleted all content on phone... So when i got home a day later i backed up my phone and everything is back except apps, contacts, and music. so my phone looks almost brand new. and now when i plug it in it has the option to back it up or start it new again AFTER i had already backed it up several times.... Anyone know a solution to my frustrating problem??

    10 GB is pretty marginal. The problem is that previous backups were "incremental", recording only changes to the previous backup. Now you are making a full backup of the iPhone 5 (iTunes will keep the last iPhone 4 backup around) so you need enough free disk to do a complete backup rather than incremental.
    Try restarting your Mac. That usually frees up a lot of memory (temporarily).

  • Need Help with back up assisant plus

    I recently activated Back up assistant plus. It started downloading pictures to my photo. It did not allow me to pick which pictures I wanted to download. Then it downloaded some of them several times. I have multiple copies of several pictures on my phone.
    How do I delete ALL the pictures that back up asst. put on my phone? And stop it from downloading any more photos?

    Yep, to really maximize the way Android and Google work together, you have a primary gmail account with that contact list doubling as your contact list for your Android phone. That way, anytime you add a contact via your smartphone, it's automatically uploaded to your gmail contact list. If you enter a contact via your PC at home, it automatically is loaded in your phone as well. It's a pretty cool set up. Disable your B.U. A Plus and the next time you enter a contact, select the email account you want to save the info to and you're good to go!

  • Need help with backing upgrading iphone

    Hi Forum community!
    So I finally decided to upgrade from the 1st gen iphone to the 3GS. The problem is that the laptop I was syncing my old iphone on crashed and I lost everything >:^(
    So basically I have all the videos and songs stuck on my old iphone. When I try to sync with another laptop I get a message that all of my old songs will be deleted since none of them are in the new laptop's itunes playlist.
    Question: How do I get all my media off of my old iphone and onto my new one without losing any data?? (again, there is no backup of the songs or videos)
    thanks, any help will be greatly appreciated.
    -MO-

    The problem is that most of my music was unpurchased (they are uncopywrited live DJ mixes). The videos are DVDs that I converted so that I can watch them on the iphone.
    Any ideas on how I can transfer the files to my computer?

Maybe you are looking for