Need help with Battlefield 3 using Geforce 560 TI Hawk

I've recently installed my new motherboard CPU ram and SSD to upgrade my old system. I started with a brand new install, installed ALL updates. so I decided to try running Battlefield 3 since my old system couldn't. It'll play for about 15 mins or so then I get a black screen, only way out is CTRL ALT DEL my way out, but I notice on the bottem it says Direct X error. My system isn't over heating and all other games run great. I do have LucidVM set to use the graphics card for battlefield 3. I don't know if maybe i need a bios update on my 560 Ti, I've updated the drivers from a clean install for nvidia and nothing seems to work. I even thought maybe it was the spare controller i had plugged in. nothing. Please respond as soon as you can. I hope i can get this resolved. I dont even play battlefield much but if this is happening with this game Im worried itll happen with others. Thanks

GPU1
Display device : MSI N560GTX-Ti Hawk (S) on GF114 GPU
Display driver : 320.18
BIOS : 70.24.21.00.00
GUID : VEN_10DE&DEV_1200&SUBSYS_26011462&REV_A1&BUS_1&DEV_0&FN_0
I finally got around to looking at afterburner to see what it says. is there any need for me to update the bios. any help would be grand

Similar Messages

Need help with session using dreamweaver

have created a login page (php/mysql) with username and
password boxes. when the form is submitted the mainpage loads up.
i want the main page to be specific to that user, so i want
their name to appear in the first line. eg.. Welcome back 'David'
I read a tutorial in the past that tought me to send the
users id in the URL and then create a record set on the mainpage
that was filtered by the URL parameter.
I have forgotten how to do this and the tutorial is no longer
available on Adobe's site.
I tried that with
$_SESSION['MM_Username'] = $loginUsername; \\ in first page
then
echo $_SESSION["MM_username"]; \\in second page, but the
problem is that is not showing user name.
i need help with that please!
can anyone tell me how to do this? Thanks in advance,
AM

IN the second page, you have to make sure that the session
has been started.
Put this at the very top of the page -
<?php if (!isset($_SESSION)) session_start(); ?>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alidad" <[email protected]> wrote in
message
news:g184i4$jgf$[email protected]..
> have created a login page (php/mysql) with username and
password boxes.
> when
> the form is submitted the mainpage loads up.
>
> i want the main page to be specific to that user, so i
want their name to
> appear in the first line. eg.. Welcome back 'David'
>
> I read a tutorial in the past that tought me to send the
users id in the
> URL
> and then create a record set on the mainpage that was
filtered by the URL
> parameter.
>
> I have forgotten how to do this and the tutorial is no
longer available on
> Adobe's site.
>
> I tried that with
> $_SESSION['MM_Username'] = $loginUsername; \\ in first
page then
> echo $_SESSION["MM_username"]; \\in second page, but
> the
> problem is that is not showing user name.
>
> i need help with that please!
>
> can anyone tell me how to do this? Thanks in advance,
>
> AM
>

Need Help with Formula using SQL maybe

I need help! I work with Crystal reports XI and usually manage just fine with the Formula editor but his one I think will require some SQL and I am not good at that.
We are running SQL 2000 I think (Enterprise Manager 8.0) Our sales people schedule activities and enter notes for customer accounts. Each is stored in a separate table. I need to find activities that are scheduled 240 days into the future and show the most recent note that goes with the account for which that activity is scheduled.
The two tables, Activities and History, share the an accountID field in common that links them to the correct customer account.   I want to look at dates in the Startdate.Activities field more than 240 days in the future and show the most recent note from the History table where the accountid's match. I figure my query will contain a join on AccountID.Activities and AccountID.History used with Max(completedate.History) but I do not understand how to word it.
I would like to perform all this in crystal if possible. I humbly request your help.
Membery

You SQL would look something like this...
SELECT
a.AccountID,
a.BlahBlahBlah, -- Any other fields you want from the Activities table
h.LastComment
FROM Activities AS a
LEFT OUTER JOIN History AS h ON a.AccountID = h.AccountID
WHERE (a.ActivityDate BETWEEN GetDate() AND DateAdd(dd, 240, GetDate()))
AND h.HistoryID IN (
     SELECT MAX(HistoryID)
     FROM History
     GROUP BY AccountID)
This method assumes that the History table has a HistoryID that increments up automatically each time a new comment is added... So a comment made today would always have a higher HistoryID that one made yesterday.
If I'm wrong and there is no HistoryID or the HistoryID doesn't increment in a chronological fashion, it can still be done but the code is a bit more complex.
HTH,
Jason

Need help with passcode using the "Remote" app

Hello and thanks in advance. I can't find a place on iTunes to enter the passcode from the Remote app.

PLEASE READ!!!
I have a HP Pavilion - Windows XP
I need help as well with the passcode. I went to Networking and Sharing center and clicked customize and changed the name to NetGear because that is what it says next to my WiFi on my iPhone but with my iPhone under Settings it says WiFi NETGEAR > but when I click on it, it says choose a Network. Is NETGEAR a network? How do I find or change to a Network? is this the problem?

Need Help with timing using multiple clips

I am in need of some help. I am trying to have a total of 16 video clips appear to slide across the screen from the right to the left, all while being equally spaced apart, going the same speed without them crossing over one another. I am using the center and anchor point in the motion tab, but once i get the the third clip i just cant seem to get the time right. I basically want them to come into the screen from the left and out of the screen from the right, all while scrolling acrossed. Please let me know if you have any suggestions.
I even trued manipulating idvd and imovie themes in Quartz Composer, ended up starting fresh and new, and then again got into the mess with timing. Please help!!!!
Thanks so much,

Try this:
Copy one clip that works OK and use Paste Attributes on the shonky one.
Al

Need help with IQ02 - using a FM do update a value in this transaction

Hi,
I am trying to change the Aquisition value (as in transaction IQ02) using either of following FM:
ITOB_SERIALNO_MODIFY_SINGLE
SERIALNUMBER_LIST_UPDATE
However the changed value of field (ANSWT) is not getting reflected in database.
I tried ABAP4_COMMIT_WORK, but it didnt work.
I also tried, BAPI_TRANSACTION_COMMIT but getting a express document message 'Update was terminated.'
Kindly help me with this. The only thing I need to do is to change the ANSWT (Aquisition value) field.
Thanks.
Sanjay
PS: Help will be rewarded

It's a bit dangerous to use SAP function modules that are not released to the user to update SAP data because they may not be a complete LUW. IE you may have to run other FMS either before or after. Try to find a BAPI. Maybe BAPI_MATERIAL_MAINTAINDATA_RT is what you need.
Rob

Need Help With Query Using Aggregation

If I have a table, defined like this:
CREATE TABLE range_test
range_id NUMBER(20) NOT NULL,
grade CHAR(1) NOT NULL,
lower_bound_of_range NUMBER(5,2) NOT NULL,
upper_bound_of_range NUMBER(5,2) NOT NULL,
received_date_time_stamp TIMESTAMP DEFAULT SYSTIMESTAMP NOT NULL
And I wanted to query the table to find the range associated with the last inserted row for each 'grade' (e.g. 'A', 'B', 'C', etc), how would I go about that?
I want something like the following, but I know that this won't work right:
SELECT
grade,
lower_bounding_of_range,
upper_bounding_of_range,
max(received_date_time_stamp)
FROM
range_test GROUP BY received_date_time_stamp;
Thanks for your help. . .I'm frustrating myself with this one and I think it should be possible without having to use PL/SQL (i.e. SQL aggregate functions or sub-queries should work).

Perhaps something along the lines of...
SQL> ed
Wrote file afiedt.buf
1 select deptno, empno, ename, hiredate
2 from emp
3* order by deptno, empno
SQL> /
    DEPTNO      EMPNO ENAME      HIREDATE
        10       7782 CLARK      09-JUN-1981 00:00:00
        10       7839 KING       17-NOV-1981 00:00:00
        10       7934 MILLER     23-JAN-1982 00:00:00
        20       7369 SMITH      17-DEC-1980 00:00:00
        20       7566 JONES      02-APR-1981 00:00:00
        20       7788 SCOTT      19-APR-1987 00:00:00
        20       7876 ADAMS      23-MAY-1987 00:00:00
        20       7902 FORD       03-DEC-1981 00:00:00
        30       7499 ALLEN      20-FEB-1981 00:00:00
        30       7521 WARD       22-FEB-1981 00:00:00
        30       7654 MARTIN     28-SEP-1981 00:00:00
        30       7698 BLAKE      01-MAY-1981 00:00:00
        30       7844 TURNER     08-SEP-1981 00:00:00
        30       7900 JAMES      03-DEC-1981 00:00:00
14 rows selected.
SQL> ed
Wrote file afiedt.buf
1 select deptno, empno, ename, hiredate
2 from (
3        select deptno, empno, ename, hiredate
4              ,row_number() over (partition by deptno order by hiredate desc) as rn
5        from emp
6       )
7 where rn = 1
8* order by deptno, empno
SQL> /
    DEPTNO      EMPNO ENAME      HIREDATE
        10       7934 MILLER     23-JAN-1982 00:00:00
        20       7876 ADAMS      23-MAY-1987 00:00:00
        30       7900 JAMES      03-DEC-1981 00:00:00
SQL>

Need help with problem using sound and vibration examples. question repost

I am generating a wav file using the sound and vibration example vi "SVXMPL_Wav Recorder(DAQmx)" using a ni 7422 board. Then, using the example vi SVXMPL_Getting started with SVT(Simulated)" attempting to play back that file. the wav file will load and play back on the graphs fine but when I click the "Play Wav File" which sends the audio to the computers speaker, I get the error "Cannot recognise sound Format". It plays the shipped example files fine. I can also play the wav files I generate on a Windows audio player. Don't know a lot about the sound and vibration toolkit or wav file formats but need to get these two to work together. Using LV 8.5 and sound and vibration toolkit 4.0. This is a bit of a repost of the same question ask last week but not answered. Thanks

Did you see Coq Rouge's reply in your original thread? Which thread are you going to continue?

I need help with Lightning using Exchange and Postbox

Hello,
I have Postbox for Mac v 3.0.11 and I would like to use Lightning for Exchange.
I cannot find any support for v 3.0.11.
Can anyone help?
Regards
SD

Did you see Coq Rouge's reply in your original thread? Which thread are you going to continue?

Need help with java uses or overrides a deprecated API.

i have some issues and have not clue where the issue is this is the error that i receive
Note: C:\Documents and Settings\Adam\My Documents\JCreator LE\MyProjects\Pokemon\src\Pokemon.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
here is my code

public void boundry()
               int i;
               //System.out.println("y is "+ (y+23) );
               //System.out.println("x is "+ (x+17) );
               //X10=wall[1].getX();
               //System.out.println("wall[1]X is" + X10);
               //check to see if over boundary
               rightflag=2;
               leftflag=2;
               downflag=2;
               upflag=2;
          for(i=0; i<=8; i++)
               System.out.println("i is" +i);
                //left side
                if ( ( (x+17) > (wall.getX() ) )
               && ( (y) < (wall[i].getY() + wall[i].getHeight()-5) )
               && ( (y+23) > (wall[i].getY()+5 ))
               && ( (x) < (wall[i].getX() + (wall[i].getWidth()/2) )) )
                    rightflag=1;
                    System.out.println("left");
               else
                    rightflag=2;
               //right side
               if ( ( (x) < ((wall[i].getX() + wall[i].getWidth() )))
               && ( (y) < wall[i].getY() + wall[i].getHeight()-5 )
               && (y > (wall[i].getY() ))
               && ( (x) > ((wall[i].getX()+(wall[i].getWidth()/2))) ) )
                    leftflag=1;
                    System.out.println("right");
               else
                    leftflag=2;
               //top side
               if ( ( (y+23) > wall[i].getY() )
               && ( (y+23) < ( wall[i].getY() + (wall[i].getHeight()/2-5) ))
               && ( (x+17) > wall[i].getX())
               && ( (x) < (wall[i].getX()+(wall[i].getWidth() ))) )
               upflag=1;
                    System.out.println("top");
               else
                    upflag=2;
               //bottom boundry
               if(
               (y < (wall[i].getY()+wall[i].getHeight() ))
               && (y > (wall[i].getY() ))
               && ((x+17) > (wall[i].getX()))
               && (x < (wall[i].getX()+wall[i].getWidth() ) ))
                    downflag=1;
                    System.out.println("bottom");
               else
                    downflag=2;
               System.out.println("test");
               //stop them from being over boundary
               if (rightflag==1)
               x=x-10;
               else if (leftflag==1)
               x=x+10;
               else if (upflag==1)
               y=y-10;
               else if (downflag==1)
               y=y+10;
               //draw the player
          public boolean handleEvent (Event e)
               //Get the scroll bars to work
               Y2 = indicatestrength.getValue();
               Y3 = X2.getValue();
               Y4 = Width2.getValue();
               Y5 = height2.getValue();
               repaint();
               return true;
          public void save ()
               File dataFile = new File ("Users/jeffrey/Server/Test.rtf");
               FileWriter out;
               BufferedWriter writeFile;
               //sample data to write
               double testnumber = -34.454;
               String testname="this is a string";
          try{
               out =new FileWriter (dataFile);
               writeFile = new BufferedWriter(out);
               //write all data as strings
               writeFile.write(testname);
               writeFile.newLine();
               writeFile.write(String.valueOf(testnumber));
               writeFile.newLine();
               //Close file
               writeFile.close();
               out.close();
               System.out.println ("data written to file");
               catch (IOException e)
                    System.out.println("there was a error writing to the file");

Need help with persistance using an array of values

I have an array of values, say:
String[] fruit = {apples, oranges, pears}
And I want to know how to send this into a database table that is separate from the rest of the class. for example, the fruit array is part of a class Food. Food has the following fields:
@Column(Name= food_type)
private String foodType;
String[] fruit
Say that the Food class places the foodType variable in the Food table, but I want to place each item of the fruit array into a separate table that has the fruit type, and Food_id that links it back to the food table.
What is the correct code for this?

jobocop17 wrote:
I have an array of values, say:
String[] fruit = {apples, oranges, pears}that won't compile without quotes around the strings
And I want to know how to send this into a database table that is separate from the rest of the class. there are a number of ways to do this
i recommend you start with JDBC
for example, the fruit array is part of a class Food. Food has the following fields:
@Column(Name= food_type)
private String foodType;
String[] fruit
Say that the Food class places the foodType variable in the Food table, but I want to place each item of the fruit array into a separate table that has the fruit type, and Food_id that links it back to the food table.
What is the correct code for this?When you write the code and it does what you want, you will then know the answer to this question.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Need help with Battlefield 3 using Geforce 560 TI Hawk

Similar Messages

Maybe you are looking for