Need help with Bellsouth e-mail for touch

Downloaded the new upgrade and love the e-mail function except that I cannot send a message via my Bellsouth account. Yes, I synched the e-mail and I also can receive the messages, just not send. Also, my Yahoo account can both send and receive with no problems. I have checked my settings (and rechecked them) many times and everything appears correct. The message I receive is that -The connection to the outgoing server "mail.bellsouth.net"failed-.
Any ideas??

Hey laura116688,
Generally ISP's will only let you send emails when you are connecting to the Internet with their Internet connection. So, if you use the outgoing mail server "mail.bellsouth.net" you will probably only be able to send when you are connected to your home Wi-Fi network.
Try the tips in this article:
http://docs.info.apple.com/article.html?artnum=305634
Make sure you try the tips listed under "Configure iPhone Mail for EDGE" that have you change the outgoing mail server to cwmx.com which works on the EDGE network.
Jason

Similar Messages

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

Hi i need help with getting my homework for school

im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
     private JPanel buttonJPanel; // panel to hold buttons
     private JButton buttons[]; // array of buttons
     private JLabel label1; // JLabel iventory number
     private JLabel label2; // JLabel product name
     private JLabel label3; // JLabel product price
     private JLabel label4; // JLabel product in stock
     private String p_ProductName; // private variable for the employee name.
     private int p_UnitCount; // private variable for the hours worked.
     private double p_UnitPrice; // private variable for the hourly wage.
     private int p_ItemNumber; // private inventory number
     //create inventory object
     Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
          myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
          myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
          myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
          myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
          myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
          label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
          label1.setToolTipText( "This is Inventory number" );
          add( label1 ); // add label1 to JFrame
          label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
          label2.setToolTipText( "This is Product Name" );
          add( label2 ); // add label1 to JFrame
          label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
          label3.setToolTipText( "This is product Price");
          add( label3 ); // add label1 to JFrame
          label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
          label4.setToolTipText( "This is Quanity in stock: " );
          add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
          String names[] = { "First", "Previous", "Next", "Last" };
          JButton buttons[] = new JButton[ names.length ];
          // create and add buttons
          for ( int count = 0; count < buttons.length; count++ )
          buttons[ count ] = new JButton( names[ count ] );
          buttonJPanel.add( buttons[ count ] ); // add button to panel
          } // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
          URL url = this.getClass().getResource("book103.gif");
          Image img = Toolkit.getDefaultToolkit().getImage(url);
          // scale the image so that it'll fit in the GUI
          Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
          // create a JLabel with the image as the label's Icon
          Icon logoIcon = new ImageIcon(scaledImage);
          JLabel companyLogoLabel = new JLabel(logoIcon);
          companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
          // add the logo to the GUI
          getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

this is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

HELP I need help with Visual voice mail

I need someone who has done it before to tell me how to use a prerecorded voice mail greeting.Or at-lest how to use one for my greeting on my VVM downloaded from the web in MP3 format.

Hello,
Please follow the steps outlined below to change your voicemail personal greeting. You will not be able to use an mp3 file as your greeting.
With your device, dial *86 + send
Enter your password
Press 4 (personal options)
Press 3 (record greetings)
Press 1 (to change your personal greeting)
Choose the type of greeting you want. Press 1 for your cell number to be announced, Press 2 for your name to be announced or Press 3 for a personal greeting
For more information on voicemail, please visit the link below:
Voice Mail
For information about Visual Voicemail, please visit:
Visual Voicemail
Thank you.
KellyW@VZWSupport

Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

Need help with date range searches for Table Sources in SES

Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….

raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!

Need help with Workflow notification mailer setup

Hi all,
I have the following requirement from my client:
"IT has a project request from the Accounting Department to automate payments for Canadian vendors. One of the things that will need to happen on this project is setting up the Workflow Notification Mailer in AP so emails can be sent to vendors notifying them of payment. We only want to support Canadian vendors – payment processing for US vendors will continue to be handled as it is today."
Please let me know how this can be done as I have no knowledge of setting up workflow notification mailer for a particular item.
Thanks.

http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=231286.1
Lot more information in Oracle Applications System Admin guide. To process messages from only a given itemtype you will use Correlation ID parameter of the mailer. But there are lot of other things that you should consider for such a set up. You would be having a build up of messages in WF_NOTIFICATION_OUT queue that you may want to manually take care of cleaning up.
More reading at https://metalink.oracle.com/metalink/plsql/f?p=130:14:6827350883078622813::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,453137.1,1,1,1,helvetica

I need help with apex send mail

I have created a apex send email, I tried to make it work I need help
DECLARE
v_Message VARCHAR2(4000);
v_MsgHTML VARCHAR2(4000);
v_CRLF VARCHAR2(6) := CHR(13) || CHR(10);
begin
v_Message := 'Your request has been sent to the Help Desk team:' ||
v_CRLF || v_CRLF;
v_Message := v_Message || 'YOUR_NAME: ' || :P10_YOUR_NAME || v_CRLF;
v_Message := v_Message || 'COMPANY_Name: ' || :P10_COMAPNY_NAME || v_CRLF;
v_Message := v_Message || 'ADDRESS: ' || :P10_ADDRESS || v_CRLF;
v_Message := v_Message || 'CITY: ' || :P10_CITY || v_CRLF || v_CRLF;
v_Message := v_Message || 'STATE: ' || :P10_STATE || v_CRLF;
v_Message := v_Message || 'ZIP: ' || :P10_ZIP || v_CRLF;
v_Message := v_Message || 'DAYTIME_PHONE: ' || :P10_DAYTIME_PHONE || v_CRLF;
v_Message := v_Message || 'EVENTING_PHONE: ' || :P10_EVENTING_PHONE || v_CRLF || v_CRLF
v_Message := v_Message || 'MOBILE_PHONE: ' || :P10_MOBILE_PHONE || v_CRLF;
v_Message := v_Message || 'FAX: ' || :P10_FAX || v_CRLF;
v_Message := v_Message || 'EMAIL_ADDRESS: ' || :P10_EMAIL_ADDRESS || v_CRLF;
v_Message := v_Message || 'OCCASION: ' || :P10_OCCASION || v_CRLF || v_CRLF
v_Message := v_Message || 'TYPE_OF_PARTY: ' || :P10_TYPE_OF_PARTY || v_CRLF;
v_Message := v_Message || 'DATE_OF_EVENT: ' || :P10_DATE_OF_EVENT || v_CRLF;
v_Message := v_Message || 'TIME_OF_EVENT: ' || :P10_TIME_OF_EVENT || v_CRLF;
v_Message := v_Message || 'LOCATION_OF EVENT: ' || :P10_LOCATION_OF EVENT || v_CRLF || v_CRLF
v_Message := v_Message || 'ESTIMATED_GUEST_COUNT: ' || :P10_ESTIMATED_GUEST_COUNT || v_CRLF;
v_CRLF := '
v_MsgHTML := 'Your request has been sent to the Help Desk team:' ||
v_CRLF || v_CRLF;
v_MsgHTML := v_MsgHTML || 'YOUR_NAME: ' || :P10_YOUR_NAME || v_CRLF;
v_MsgHTML := v_MsgHTML || 'COMPANY_Name: ' || :P10_COMAPNY_NAME || v_CRLF;
v_MsgHTML := v_MsgHTML || 'ADDRESS: ' || :P10_ADDRESS || v_CRLF;
v_MsgHTML := v_MsgHTML || 'CITY: ' || :P10_CITY || v_CRLF || v_CRLF;
v_MsgHTML := v_MsgHTML || 'STATE: ' || :P10_STATE || v_CRLF;
v_MsgHTML := v_MsgHTML || 'ZIP: ' || :P10_ZIP || v_CRLF;
v_MsgHTML := v_MsgHTML || 'DAYTIME_PHONE: ' || :P10_DAYTIME_PHONE || v_CRLF;
v_MsgHTML := v_MsgHTML || 'EVENTING_PHONE: ' || :P10_EVENTING_PHONE || v_CRLF || v_CRLF
v_MsgHTML := v_MsgHTML || 'MOBILE_PHONE: ' || :P10_MOBILE_PHONE || v_CRLF;
v_MsgHTML := v_MsgHTML || 'FAX: ' || :P10_FAX || v_CRLF;
v_MsgHTML := v_MsgHTML || 'EMAIL_ADDRESS: ' || :P10_EMAIL_ADDRESS || v_CRLF;
v_MsgHTML := v_MsgHTML || 'OCCASION: ' || :P10_OCCASION || v_CRLF || v_CRLF
v_MsgHTML := v_MsgHTML || 'TYPE_OF_PARTY: ' || :P10_TYPE_OF_PARTY || v_CRLF;
v_MsgHTML := v_MsgHTML || 'DATE_OF_EVENT: ' || :P10_DATE_OF_EVENT || v_CRLF;
v_MsgHTML := v_MsgHTML || 'TIME_OF_EVENT: ' || :P10_TIME_OF_EVENT || v_CRLF;
v_MsgHTML := v_MsgHTML || 'LOCATION_OF EVENT: ' || :P10_LOCATION_OF EVENT || v_CRLF || v_CRLF
v_MsgHTML := v_MsgHTML || 'ESTIMATED_GUEST_COUNT: ' || :P10_ESTIMATED_GUEST_COUNT || v_CRLF;
HTMLDB_MAIL.SEND(
P_TO => '[email protected]',
P_FROM => :P16_EMAIL,
P_BODY => v_message,
P_BODY_HTML => v_MsgHTML,
P_SUBJ => :P16_CHURCH_NAME || ' Help Request');
APEX_MAIL.PUSH_QUEUE;
end;
YOUR_NAME,
COMPANY_NAME,
ADDRESS,
CITY,
STATE,
ZIP,
DAYTIME_PHONE,
EVENTTIME_PHONE,
MOBILE_PHONE,
FAX,
EMAIL_ADDRESS,
OCCASION,
TYPE_OF_PARTY,
DATE_OF_EVENT,
TIME_OF_EVENT,
LOCATION_OF EVENT,
ESTIMATED_GUEST_COUNT

DECLARE
v_message VARCHAR2 (4000); v_msghtml VARCHAR2 (4000); v_crlf VARCHAR2 (6) := CHR (13) || CHR (10);BEGIN v_message := 'Your request has been sent to the Help Desk team:' || v_crlf
|| v_crlf; v_message := v_message
|| 'YOUR_NAME: ' || :p10_your_name
|| v_crlf; v_message := v_message
|| 'COMPANY_Name: ' || :p10_comapny_name
|| v_crlf; v_message := v_message
|| 'ADDRESS: ' || :p10_address
|| v_crlf; v_message := v_message
|| 'CITY: ' || :p10_city
|| v_crlf
|| v_crlf; v_message := v_message
|| 'STATE: ' || :p10_state
|| v_crlf; v_message := v_message
|| 'ZIP: ' || :p10_zip
|| v_crlf; v_message := v_message
|| 'DAYTIME_PHONE: ' || :p10_daytime_phone
|| v_crlf; v_message := v_message
|| 'EVENTING_PHONE: ' || :p10_eventing_phone
|| v_crlf
|| v_crlf; v_message := v_message
|| 'MOBILE_PHONE: ' || :p10_mobile_phone
|| v_crlf; v_message := v_message
|| 'FAX: ' || :p10_fax
|| v_crlf; v_message := v_message
|| 'EMAIL_ADDRESS: ' || :p10_email_address
|| v_crlf; v_message := v_message
|| 'OCCASION: ' || :p10_occasion
|| v_crlf
|| v_crlf; v_message := v_message
|| 'TYPE_OF_PARTY: ' || :p10_type_of_party
|| v_crlf; v_message := v_message
|| 'DATE_OF_EVENT: ' || :p10_date_of_event
|| v_crlf; v_message := v_message
|| 'TIME_OF_EVENT: ' || :p10_time_of_event
|| v_crlf; v_message := v_message
|| 'LOCATION_OF EVENT: ' || :p10_location_of_event
|| v_crlf
|| v_crlf; v_message := v_message
|| 'ESTIMATED_GUEST_COUNT: ' || :p10_estimated_guest_count
|| v_crlf;
v_crlf := '
'; v_msghtml := 'Your request has been sent to the Help Desk team:' || v_crlf
|| v_crlf; v_msghtml := v_msghtml
|| 'YOUR_NAME: ' || :p10_your_name
|| v_crlf; v_msghtml := v_msghtml
|| 'COMPANY_Name: ' || :p10_comapny_name
|| v_crlf; v_msghtml := v_msghtml
|| 'ADDRESS: ' || :p10_address
|| v_crlf; v_msghtml := v_msghtml
|| 'CITY: ' || :p10_city
|| v_crlf
|| v_crlf; v_msghtml := v_msghtml
|| 'STATE: ' || :p10_state
|| v_crlf; v_msghtml := v_msghtml
|| 'ZIP: ' || :p10_zip
|| v_crlf; v_msghtml := v_msghtml
|| 'DAYTIME_PHONE: ' || :p10_daytime_phone
|| v_crlf; v_msghtml := v_msghtml
|| 'EVENTING_PHONE: ' || :p10_eventing_phone
|| v_crlf
|| v_crlf; v_msghtml := v_msghtml
|| 'MOBILE_PHONE: ' || :p10_mobile_phone
|| v_crlf; v_msghtml := v_msghtml
|| 'FAX: ' || :p10_fax
|| v_crlf; v_msghtml := v_msghtml
|| 'EMAIL_ADDRESS: ' || :p10_email_address
|| v_crlf; v_msghtml := v_msghtml
|| 'OCCASION: ' || :p10_occasion
|| v_crlf
|| v_crlf; v_msghtml := v_msghtml
|| 'TYPE_OF_PARTY: ' || :p10_type_of_party
|| v_crlf; v_msghtml := v_msghtml
|| 'DATE_OF_EVENT: ' || :p10_date_of_event
|| v_crlf; v_msghtml := v_msghtml
|| 'TIME_OF_EVENT: ' || :p10_time_of_event
|| v_crlf; v_msghtml := v_msghtml
|| 'LOCATION_OF EVENT: ' || :p10_location_of_event
|| v_crlf
|| v_crlf; v_msghtml := v_msghtml
|| 'ESTIMATED_GUEST_COUNT: ' || :p10_estimated_guest_count
|| v_crlf;
HTMLDB_MAIL.SEND(
P_TO => '[email protected]',
P_FROM => '[email protected]',
P_BODY => v_message,
P_BODY_HTML => v_message,
P_SUBJ => 'Application Comments!!');
APEX_MAIL.PUSH_QUEUE;
end;

I need help with my mac mail account password!

okay. so i came home one day after work, and i went to check my mail. there is a squiggly line next to my inbox. i tried to send a message, and a box popped up asking for my account password. now i only use two passwords - one is a word with numbers, and the other is just a word. i entered both, and was told they were incorrect. i'm stumped. am i going to have to start a new account? is there a way to change the password and still get my mail? would someone please help me out? thanks in advance to anyone who does.

Well, then maybe Mail is corrupted, so let's try to fix that. You'll need:
1. your Mac OS X installation disc.
2. a copy of Pacifist.
3. confidence and patience.
First, quit Mail, go to Users/your username/Library/ and copy the Mail folder to your Desktop; then download Pacifist using the link above.
Next, insert your Mac OS X installation disc, open it with Pacifist and browse the contents of the Optional Installs folder until you find the installer package for Mail, then open that Mail package.
Select the top-level of that package in the Pacifist file listing and click on the Extract button in Pacifist and choose your Desktop for the destination. When that is finished, move the newly extracted copy of Mail to your HD/Applications folder. Choose "Replace" when it tells you there's already a newer or older file there with the same name.
Quit Pacifist, open System Preferences and use Disk Utility to Repair Permissions; then quit System Preferences, logout and log back in, then try starting Mail and see if that resolves your problem.
Mulder

Need Help With My 40G Creative Zen Touch Mp3 Play

Got this beautiful mp3 player for a steal at only $95 dlvd!
Works great, only problem is I just installed the software and when I run the Organizer thing, it doesnt detect any mp3s. So when I go into my folders containing mp3's they dont show up. I tried to associate formats using the File Options in the settings menu but there are no file types listed to associate! Im confused at what to do.
Also when the program software was installing I kept getting error messages relating to the registration of certain parts of the program, it still installed complete but gave me a error message to report to Creative. Everything works fine so far though?
Can anyone help me out here or recognize the problem?

micromouse wrote:
Your installation did not complete successfully.
<FONT face=Helv size=2> Here is what you should do:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.
- (Depending on your product and firmware)
For non-PlaysForSure Zen series: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
or:
For PlaysForSure Zen Touch: Download and install the Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players.
- If it is listed for your product: Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.
Hi thanks for the help, Im not sure if my ins the Plays for sure model or not? Its the Creative Zen Touch 40 GB. I bought it without a manual so im not positi've how to check the details. It came with a software installation CD, that is what I used for the software. So does this mean I just need to download the plugins you listed? Is that what is affecting the Organizer in the fact that it doesnt display mp3s?

I need help with proper DNS setup for 10.5.8 Server

I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.

Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what?

Need help with Bellsouth e-mail for touch

Similar Messages

Maybe you are looking for