Need Help with boot camp install, keep getting message can not install need

Hi Folks,
I keep getting a message that the boot camp assistant can not install needs firmware update. All updates are currently installed. I have tried all available updates and hey ell me the computer doesn't need them????
Any help that you may provide is greatly appreciated.
Jack
P.S. The computer is an Imac early 2006 1.83 gb.
Machine Name: iMac
Machine Model: iMac4,1
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 1.83 GHz
L2 Cache (shared): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0039.B00
Serial Number: W86220MSU2N
SMC Version: 1.1f5

You do not have the firmware update installed. You only have the SMC firmware update. Boot Camp requires this firmware update.

Similar Messages

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server.

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.

Installing an HP network printer

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

I need help with Boot Camp 2.1! Win XP

I have downloaded the update on Windows XP SP2, but it will not install.
"The installation encountered errors.... Try again at a different time." That's what comes up.
I have tried everything! The command shell thing where you have to type the path of the update file (cmd.exe), I have checked the language code (yes it is 1033) and I have downloaded the files seperately. NOTHING WORKS! I have even re-installed Boot Camp.
I have:
Mac Pro
10.5.4 Leopard
Windows XP SP2
Any help will be appreciated!

I have found a solution!
Well not for installing Boot Camp 2.1 but for installing XP SP3 with Boot Camp 2.0!
I found it on a website but I can't remember which one. But here is what I did.
Start> Run:
Type: regedit
Click "OK"
On the left side of the window there should be a panel with folders name similar to "HKEY_....". Click on:
HKEYLOCALMACHINE> SOFTWARE> Microsoft> Windows> Current Version> Double click "Setup"
On the window should appear a few files next to the panel on the left. The file type should have "REG" then something after it.
Check in the "Name" column that you DO NOT have "BootDir". If you do then this is not the answer for you!
If you don't have that file:
Click EDIT> NEW> STRING VALUE
Name it: BootDir
Right click the file and go to Modify.
Then type in: C:\ and press OK (Or if another drive is your main drive (eg. D) then type in the letter of that drive instead of C (eg. D:\)).
Restart the computer and go into Windows again. Then download the SP3 update in whatever way you have done before.
The installation should continue without the message saying "You need more memory" or something.
FOR WINDOWS XP!

Need help with boot camp.

Hi. I bought Windows Vista Home Basic today to install on my mac with boot camp. I let boot camp partition the drive with 32GB, and when I ran the Vista installer, it said that the partition needs to be formatted with NTFS. I go ahead and quit the installer, the machine reboots, but it boots from the CD. I tried holding down X and Option-Cmd-Shift-Del to no avail.
How can I just boot from the HDD instead of the optical drive?
Help would be much appreciated.

Thanks for answering, but I figured out the problem the minute after I posted. First of all, I didn't read the info 2 pages after the page I was on about boot camp (didn't know you could format it then and there), and all I had to do was press the eject key after the startup chime sounded
So now I successfully have a 50GB partition to Vista, fired up the Halo Trial, and fragged some noobz.
However I do have another problem that I need some help with, whenever I boot into vista, my internet is extremely slow. I looked up the problem and I found that I needed to install another driver called Broadcom or something, however when I double clicked on it, Vista asked me to cancel or allow (chuckles) and nothing happens. If I reset my router, however, the problems are fixed and I'm back at 10Mbps.
P.S. I didn't back up Leopard since I hardly have anything on my Mac for now as I just bought it 2 weeks ago, and it only takes an hour or so to reinstall; but I'll buy a drive for Time Machine soon. Time Machine does allow you to restore your files after a Leopard reinstall right?
Thanks.

Need help with boot camp asap, please.

Hi, I accidently installed windows 7 without copying 3.0 boot camp files and the disk is not with me it's like in another country. Is there a way to download boot camp 3.0? cause currently I cannot go back to OS stuck on Windows. What should I do? all my stuff is on OS..help would be great, please.

You can not download the BC 3.0 drivers, they are only available from the disk.
Reboot and hold the option key down, select OSX and Read The Boot Camp Directions before you break something!

Need help with Boot Camp dual booting

I'm trying to install windows 7 on a separate partition but after the mac book pro restarts to start the installation it says windows can't be installed because it needs to be NTFS format
but the mac partition is Mac OS Extended(journaled) but gives no option to format the other partition as NTFS
what to do?

I assume you did not use Boot Camp Assistant to create the Windows partition? If you did and are in the Win 7 installer you should be looking at a display of all the partitions on your hard drive. Locate the partition you allocated for Boot Camp (you should know it by its size and/or it has the volume name of BOOT CAMP. Select the volume then click on the option to Format the volume from the group of options at the lower part of the display. If the option is not active then with the volume selected click on the Delete option. Refresh the display then reselect the now unallocated volume and click on the Format option.
If none of the above work then reboot. When you hear the chime hold down the C key and wait until the computer starts up from the Windows DVD. When you reach the same point as above locate and select the unallocated volume for Boot Camp. Click on that Format option.

Need help with Boot camp assistant!!! (partitioning disk)

when i click partition disk in boot camp asistan after 5 minuts this message appears:
*+Verification failed. This disk could not be partitioned.+*
+Use Disk Utility to repair this disk.+
anyone know how to fix this??
i really want bootcamp!

Yes. Your directory is damaged and needs to be repaired. Boot up to your original gray iMac install Disk but instead of going through the install process, after you select the language go up to the top under the Utilities Menu and open Disk Utility. Select your hard drive on the left hand side and under the First Aid tab click Repair Disk.
George

I need help with boot camp. "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

I keep getting message itunes not installed correctly re install error 7 windows (error 5)

I have re-installed it andun istalled it about 4 times and keep getting this error message.

I have this problem at the moment and I have done everything in the tutorial to fix it but still no joy.
Did you find a solution?? Many thanks Diane

Need help with my ymail acct. keep getting pop up verify password ; which is correct , this will appear able to get mail then it will appear again ....

can anyone asst with this issue please

Hello jeff_morrett,
To find a great deal on an open box item is awesome! I'm sure you and your wife were excited to have everything delivered and installed. It is regrettable to hear of the delay you may have experienced due to inclement weather. While I'm glad James and the other home theater technician were able to make it rather than reschedule and were professional, I understand that a phone call would have made a significant difference once they realized they would be late.
To find that your open box LG soundbar you had purchased may not have had the mounting bracket you expected, would of course be detrimental to your installation experience. Our open box items should be thoroughly inspected to be labeled and priced accurately. I am truly sorry that your unit may not have included all parts as expected, and that the bracket the store initially provided you to resolve this issue may not have worked for your needs.
It is discouraging to hear that Jane and Chris from the store may not have been able to provide a satisfactory resolution. To hear that you may have to upgrade to a soundbar you didn't choose and have to pay for another appointment would be quite irritating and rather disappointing. I apologize for any disappointment or frustration this entire experience may have caused you.
Please know that I was able to locate your purchase and order information with the information you shared in your post, and I am reaching out to the leadership at the store to see if we may have any other options for you. If you should have any questions, please let me know. In the meantime, I greatly appreciate your patience.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

HT1212 I need help with my ipod it says that I can not use it until 22,513,226 what can I do to speed up the process

Can not use my device until 22513226 minutes can you help

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I keep getting a can not get mail message yet I'm getting mail

I Keep getting message "can not get mail" but im getting mail?

Hi Mel82384,
Do you have multiple email accounts on your iPhone? It is possible that one (or more) of them are functioning correctly and others are not. I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Mail
Thanks for using Apple Support Communities.
Best,
Brett L

I am trying to install to my laptop but keeping getting message "could not access network location %Public%\Desktop\.

I can't install iTunes to my laptop. Keep getting message "could not access network location %Public%\Desktop\. Can someone help me?

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Need Help with boot camp install, keep getting message can not install need

Similar Messages

Maybe you are looking for