Need help with Business One Implementation Consultant Certification

Hello,
I need help preparing for the B1 certification. I have taken the test once already and failed. I found it very tricky with multiple correct answers for each question.
I have gone thru the eLearning several times now. And this week I am taking the instructor led training. I have also purchased and studied the Ebook. I have a good grasp of the product, but I feel that this is not enough to help prepare for the test.
I want to know if there are any other resources I could use to help prepare for the test. Are there any practice exams
Any and all help is appreciated
Thank you!
John
jseftonATsophlogic.com

Hi John,
I found the e-learning good , but a bit limited, so I branched out to these & passed quite well :
- documentation links on the 2007 landing page:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics -> 2007
- ETS:
Channel Partner Portal -> Solutions -> SAP Business One -> Support -> Training & Knowledge
- DRC:
Channel Partner Portal -> Solutions -> SAP Business One -> Support -> Documentation resource centre
Hope it helps & good luck!
All the best,
kerstin

Similar Messages

Need help with Business One Certification

Hello,
I need help preparing for the B1 certification. I have taken the test once already and failed. I found it very tricky with multiple correct answers for each question.
I have gone thru the eLearning several times now. And this week I am taking the instructor led training. I have also purchased and studied the Ebook. I have a good grasp of the product, but I feel that this is not enough to help prepare for the test.
I want to know if there are any other resources I could use to help prepare for the test. Are there any practice exams
Any and all help is appreciated
Thank you!
John
jseftonATsophlogic.com

Hi John,
when I was studying for the 2007 certfication I found the info in the DRC & the ETSs very good.
Channel Partner Portal -> Solutions -> SAP Business One -> Solution Overview -> Additional Resources -> Documentation Resource Centre
There was also a lot of info on the Landing pages:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics-> SAP Business One 2007 information centre -> lots of links to individual landing pages, pdfs etc.
Good Luck!
All the best,
Kerstin

Help with Business One (B1) Core

I am trying to install the core SAP ECC tables for the SMB solutions Business One (B1) on Window 2008 or Window 7 64-bit OS.
I am confused on which B1 version to start with for installing and configuring the core SAP ECC tables functionally then install the add-ins for demou2019s
What RDBMS do we use to install B1 MAXDB , SQL Servers etc?
Which version and what order do we install first to get the Core SAP ECC tables and modules then what add-ins or upgrades?
1.     SAP Business One 8.8 Integration for SAP Net Weaver (B1iSN 8.8)
2.     SAP Business One 8.8
3.     SAP Business One 2007 SP01
4.     SAP Business One 2007
5.     SAP Business One 2005 A SP01
6.     SAP Business One 2005
7.     SAP Business One 2004
Thanks
Rod

Hi Rod,
ECC and B1 is not the same. You can not get the Core SAP ECC tables and modules from B1.
SAP Business One 8.8 is current version that you should install. Then SAP Business One 8.8 Integration for SAP Net Weaver (B1iSN 8.8) for integration with ECC.
Only SQL server is supporting RDBMS for B1.
Thanks,
Gordon

Really need help with this one!!

hi all im posting here in the hope that some one can show me some light at the end of the tunnel as to my bb problem as its starting to get depressing now!
long story short ive had bt bb for 4 weeks now and im paying for 8mg as thats the fastest my area can provide but my transfer speed is locked at 2mg maximum. countless phone calls later they said its a throughput issue and they will put a request in to reset my profile and everything will be fine. as i thought it didnt work. lots of phone calls later they said i had to wait 10 days after the request is put in for my speed to increase. waited 12 days and still nothing! more phone calls later they eventually sent an engineer round who said himself he cant see why my downloads are locked at 2 mg when after his own tests he said the line should be giving me at the very least a stable 6.5mg so he proceeded to put a request in of his own to a bt computer thats codenamed "rambo" to increase the speed to my house. he said i should see results after 4 hrs but in some rare cases its taken 72 hrs to kick in. so i ended up waiting 4 days and still **bleep** all. im so so sick of bt and all the **bleep** they are feeding me as they keep telling me every single time they say there gonna fix it that this time it will 100% fix my problem and it never does. really feel im being ripped off cos im paying for the top package in my area and im not getting anything anywhere near what i should be. can anyone please help with my problem it would be very much apreciated.
thanks for reading all this peeps

also heres the speed test results
FAQ
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
1840 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1840 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
whats really getting to me now is bt keep admitting to me my acheivable speed should actually be in the region of 6.5 mg and my profile shouldnt be set to 2000kbps so if they know the problem themselves why cant they fix it

Another Videora Post- I just need help with this one problem, please!

I am guessing that the best way to convert your videos to an iPod compatible format is Videora. It works lovely, except for one glitch. I notice that the audio is noticeably off when I play the video. Any solution on how to fix this? I would really appreciate it if anyone helped me out on this
Windows XP

It is on both, I am thinking.. I tried it with a movie avi file, and it always comes out off.

Need help with sun one and xml

I have installed the Java Web Services Developer Pack. I am also using Sun One ide. I am trying to import the dom package. When ever i use "import org.", in the Sun One ide to lookup the packages, no packages come up for w3c.dom. I have tried to just use "import org.w3c.dom;", but i get an error when i try to instantiate a DOMImplementation. The JWSDP says that you do not need to register any classpaths. Any help would be much appreciated.

I've noticed that no packages come up either.
Try:
import org.w3c.dom.*;
to import all the classes, or be more specific:
import org.w3c.dom.Node;
(this is better coding style as you know exactly what classes you are using)
Hope this helps
Chalotte

Need help with output one field horizontally please

I know I have seen some ideas and threads about this, but it is not really what I need. I have a report in CR XI that seems to be on the right path. The problem I am having is one field that needs to be in details could provide multiple results (products and services) which duplicates all the records. Some customers I'll have 3 lines, the next 9 ... depending on how many P&S they have.
What I have done is moved all fields from the details section to group1 which so far seems fine and left my P&S field in details.
The output is normal:
prod1
prod2
prod3
prod4
etc.....
What I need is this: prod1, prod2, prod3, prod4, etc.
Any ideas greatly appreciated.
In the group header add a formula
WhilePrintingRecords;
Global StringVar ProductList;
ProductList := '';
in the details
WhilePrintingRecords;
Global StringVar ProductList;
If ProductList = '' then
ProductList :=
else
ProductList := ProductList & ', ' & ; ''
In the group footer
WhilePrintingRecords;
Global StringVar ProductList;
ProductList
Edited by: Terry Mergl on Apr 20, 2010 9:15 PM

What you have should do it. Is there an issue? Please explain in detail, giving sample data, current results, and expected results.
Carl

JMF Datasource problem..i need help with this one error

This the error i get when i try to run my program
Error: Unable to realize com.sun.media.amovie.AMController@18b81e3Basically i have a mediapanel class that initialize and play the media as datasource
import java.awt.BorderLayout;
import java.awt.Component;
import java.io.*;
import java.net.URL;
import javax.media.*;
import javax.swing.JPanel;
import java.nio.ByteBuffer;
public class MediaPanel extends JPanel
   InputStream stream;
   String name = "";
   ByteBuffer inputBuffer;
   byte[] store = null;
   public MediaPanel( InputStream in )
   try{
      this.stream = in;
      //store stream as ByteBuffer
      store = new byte[stream.available()];
      stream.read(store);
      inputBuffer.allocate(store.length);
      inputBuffer.wrap(store);
      //get contentType
      DrmDecryption drm = new DrmDecryption();
      name = drm.naming;
      setLayout( new BorderLayout() ); // use a BorderLayout
      ByteBufferDataSource ds = new ByteBufferDataSource(inputBuffer,name);
      // Use lightweight components for Swing compatibility
      Manager.setHint( Manager.LIGHTWEIGHT_RENDERER, true );
         // create a player to play the media specified in the URL
         Player mediaPlayer = Manager.createRealizedPlayer(ds);
         // get the components for the video and the playback controls
         Component video = mediaPlayer.getVisualComponent();
         Component controls = mediaPlayer.getControlPanelComponent();
         if ( video != null )
            add( video, BorderLayout.CENTER ); // add video component
         if ( controls != null )
            add( controls, BorderLayout.SOUTH ); // add controls
         mediaPlayer.start(); // start playing the media clip
       }catch(Exception e){}
   } // end MediaPanel constructor
} // end class MediaPanelThe ByteBufferDataSource class is use to create the datasource for the player
import javax.media.protocol.ContentDescriptor;
import javax.media.protocol.PullDataSource;
import java.nio.ByteBuffer;
import java.io.IOException;
import javax.media.MediaLocator;
import javax.media.Duration;
import javax.media.Time;
public class ByteBufferDataSource extends PullDataSource {
protected ContentDescriptor contentType;
protected SeekableStream[] sources;
protected boolean connected;
protected ByteBuffer anInput;
protected ByteBufferDataSource(){
* Construct a ByteBufferDataSource from a ByteBuffer.
* @param source The ByteBuffer that is used to create the
* the DataSource.
public ByteBufferDataSource(ByteBuffer input, String contentType) throws IOException {
anInput = input;
this.contentType = new ContentDescriptor(
               ContentDescriptor.mimeTypeToPackageName(contentTyp e));
* Open a connection to the source described by
* the ByteBuffer/CODE>.
* The connect method initiates communication with the source.
* @exception IOException Thrown if there are IO problems
* when connect is called.
public void connect() {
sources = new SeekableStream [1];
sources[0] = new SeekableStream(anInput);
* Close the connection to the source described by the locator.
* The disconnect method frees resources used to maintain a
* connection to the source.
* If no resources are in use, disconnect is ignored.
* If stop hasn't already been called,
* calling disconnect implies a stop.
public void disconnect() {
* Get a string that describes the content-type of the media
* that the source is providing.
* It is an error to call getContentType if the source is
* not connected.
* @return The name that describes the media content.
public String getContentType() {
return contentType.getContentType();
public Object getControl(String str) {
return null;
public Object[] getControls() {
return new Object[0];
public javax.media.Time getDuration() {
return Duration.DURATION_UNKNOWN;
* Get the collection of streams that this source
* manages. The collection of streams is entirely
* content dependent. The MIME type of this
* DataSource provides the only indication of
* what streams can be available on this connection.
* @return The collection of streams for this source.
public javax.media.protocol.PullSourceStream[] getStreams() {
return sources;
* Initiate data-transfer. The start method must be
* called before data is available.
*(You must call connect before calling start.)
* @exception IOException Thrown if there are IO problems with the source
* when start is called.
public void start() throws IOException {
* Stop the data-transfer.
* If the source has not been connected and started,
* stop does nothing.
public void stop() throws IOException {
}i have a SeekableStream to manipulate the control of the streaming position.
import java.lang.reflect.Method;
import java.lang.reflect.Constructor;
import java.io.IOException;
import java.nio.ByteBuffer;
import java.nio.BufferUnderflowException;
import javax.media.protocol.PullSourceStream;
import javax.media.protocol.Seekable;
import javax.media.protocol.ContentDescriptor;
public class SeekableStream implements PullSourceStream, Seekable {
protected ByteBuffer inputBuffer;
* a flag to indicate EOF reached
/** Creates a new instance of SeekableStream */
public SeekableStream(ByteBuffer byteBuffer) {
inputBuffer = byteBuffer;
this.seek((long)(0)); // set the ByteBuffer to to beginning
* Find out if the end of the stream has been reached.
* @return Returns true if there is no more data.
public boolean endOfStream() {
return (! inputBuffer.hasRemaining());
* Get the current content type for this stream.
* @return The current ContentDescriptor for this stream.
public ContentDescriptor getContentDescriptor() {
return null;
* Get the size, in bytes, of the content on this stream.
* @return The content length in bytes.
public long getContentLength() {
return inputBuffer.capacity();
* Obtain the object that implements the specified
* Class or Interface
* The full class or interface name must be used.
* The control is not supported.
* null is returned.
* @return null.
public Object getControl(String controlType) {
return null;
* Obtain the collection of objects that
* control the object that implements this interface.
* No controls are supported.
* A zero length array is returned.
* @return A zero length array
public Object[] getControls() {
Object[] objects = new Object[0];
return objects;
* Find out if this media object can position anywhere in the
* stream. If the stream is not random access, it can only be repositioned
* to the beginning.
* @return Returns true if the stream is random access, false if the stream can only
* be reset to the beginning.
public boolean isRandomAccess() {
return true;
* Block and read data from the stream.
* Reads up to length bytes from the input stream into
* an array of bytes.
* If the first argument is null, up to
* length bytes are read and discarded.
* Returns -1 when the end
* of the media is reached.
* This method only returns 0 if it was called with
* a length of 0.
* @param buffer The buffer to read bytes into.
* @param offset The offset into the buffer at which to begin writing data.
* @param length The number of bytes to read.
* @return The number of bytes read, -1 indicating
* the end of stream, or 0 indicating read
* was called with length 0.
* @throws IOException Thrown if an error occurs while reading.
public int read(byte[] buffer, int offset, int length) throws IOException {
// return n (number of bytes read), -1 (eof), 0 (asked for zero bytes)
if ( length == 0 )
return 0;
try {
inputBuffer.get(buffer,offset,length);
return length;
catch ( BufferUnderflowException E ) {
return -1;
public void close() {
* Seek to the specified point in the stream.
* @param where The position to seek to.
* @return The new stream position.
public long seek(long where) {
try {
inputBuffer.position((int)(where));
return where;
catch (IllegalArgumentException E) {
return this.tell(); // staying at the current position
* Obtain the current point in the stream.
public long tell() {
return inputBuffer.position();
* Find out if data is available now.
* Returns true if a call to read would block
* for data.
* @return Returns true if read would block; otherwise
* returns false.
public boolean willReadBlock() {
return (inputBuffer.remaining() == 0);
}

can u send me ur DrmDecryption.java file so that i can help

Need help with SSL custom trustKeystore, invalid certification path

Hi,
We have a webservice installed on a server over https protocol, and the following certification chain:
Internal Root CA Certificate
         |
         +-----> Certificate X
                         |
                         +----> Cerificate YCertificate Y has Common Name (CN) equals to the hostname where this webservice is deployed.
On the client side, since the root CA certificate is internal, we had to install a custom trust keystore, and use the -Djavax.net.ssl.trustStore=/path/to/trust.keystore system property. Inside that trust keystore we imported the Internal Root CA certificate.
When the client invoke the webservice, it still gives SSL handhsake exception, saying couldn't find certification path. However when we imported Certificate Y into the trust keystore, it works. Is there any way to make the handshake work just by trusting the root CA?
The client runs in a JBoss container, and we tried -Dorg.jboss.security.ignoreHttpsHost=true but didn't help

Please find more detail on exception stack below. Sorry I have to truncate the stack to avoid showing our internal class names
210 WARN [SeamLoginModule] Error invoking login method
javax.el.ELException: javax.net.ssl.SSLHandshakeException: sun.security.validator.Validat
orException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilder
Exception: unable to find valid certification path to requested target
        at org.jboss.el.util.ReflectionUtil.invokeMethod(ReflectionUtil.java:339)
        at org.jboss.el.util.ReflectionUtil.invokeMethod(ReflectionUtil.java:348)
        at org.jboss.el.parser.AstPropertySuffix.invoke(AstPropertySuffix.java:58)
        at org.jboss.el.parser.AstValue.invoke(AstValue.java:96)
        at org.jboss.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:276)
        at org.jboss.seam.core.Expressions$2.invoke(Expressions.java:175)
        at org.jboss.seam.security.jaas.SeamLoginModule.login(SeamLoginModule.java:109)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.j
ava:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
        at javax.security.auth.login.LoginContext$5.run(LoginContext.java:706)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokeCreatorPriv(LoginContext.java:703
        at javax.security.auth.login.LoginContext.login(LoginContext.java:575)
        at org.jboss.seam.security.Identity.authenticate(Identity.java:344)
        at org.jboss.seam.security.Identity.authenticate(Identity.java:332)
        at org.jboss.seam.security.Identity.login(Identity.java:259)
--- truncated ----------------------------------------------------
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException
: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException:
unable to find valid certification path to requested target
        at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
        at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:154)
        at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32
        at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
        at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
        at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
        at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
        at org.apache.axis.client.Call.invoke(Call.java:2767)
        at org.apache.axis.client.Call.invoke(Call.java:2443)
        at org.apache.axis.client.Call.invoke(Call.java:2366)
        at org.apache.axis.client.Call.invoke(Call.java:1812)
--- truncated ----------------------------------------------------
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException
: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException:
unable to find valid certification path to requested target
        at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
        at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
        at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
        at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshak
er.java:1035)
        at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.
java:124)
        at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
        at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketIm
pl.java:1096)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1
123)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1
107)
        at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java
:186)
        at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
        at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
        at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
        ... 121 more
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.secu
rity.provider.certpath.SunCertPathBuilderException: unable to find valid certification pa
th to requested target
        at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:285)
        at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:191)
        at sun.security.validator.Validator.validate(Validator.java:218)
        at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImp
l.java:126)
        at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509Trust
ManagerImpl.java:209)
        at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509Trust
ManagerImpl.java:249)
        at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshak
er.java:1014)
------ truncated ------------------------------------------------------
        ... 132 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find val
id certification path to requested target
        at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuild
er.java:174)
        at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
        at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:280)
        ... 138 more

Please I really need help with this one.

Ok I have this problem where I hook my ipod up and it works fine connects and is recognized. However, when i start trying to move music to it or transfer information using it like a jump drive it suddenly disconnects. At this point it is no longer recognized by my computer unless I restart my computer. In device manager it shows up as an unknown device and when i check the status of it, it says no device drivers installed for this device. What could be the problem here?

http://docs.info.apple.com/article.html?artnum=93499

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Need help with "percentage of" I need to see grandparent totals

Theres a division in my database between Supervisors, Representants, and Lines.
The hierarchy is Supervisors -> Representants -> Lines
I have a measure called "acum sold" and I need the percentage of it.
I`m using "Percentage of" -> "Collumn"and it works untill I reach the Lines level, then it doesn`t work (well it does, but not in the way I want)
Basically it`s this
Supervisor----Acum Sold---% Acum Sold
X-------------1000------------100%----
Then I go to the next level
Supervisor----Representant----Acum Sold---% Acum Sold
-----X----------------XY------------------500---------------50%-----
-----X----------------YZ------------------500---------------50%-----
And it`s still the way I want, but when I drill to XY representant...
Supervisor----Representant----Lines-------Acum Sold---% Acum Sold
-----X----------------XY------------XY1---------100---------------20%-----
-----X----------------XY------------XY2---------400---------------80%-----
The percentage is based off the XY totals (percentage of the 500 total acum sold) but I actually need the percentage based on the Supervisor
I need something like this
Supervisor----Representant----Lines-------Acum Sold---% Acum Sold
-----X----------------XY------------XY1---------100---------------10%-----
-----X----------------XY------------XY2---------400---------------40%-----
Because XY1 and XY2 sold only 50% of the supervisor`s total. But BIEE is always trying to get 100% of the parent level, instead of the "grandparent" one.
I hope I didn`t sound that confusing, I really need help with this one.
Thanks in advance

You need to use level based measures. Look up documentation/this forum for Level based measures (LBM).
In short you drag a fact meaure to a heirarchy level in business mapping layer and it will always aggreagtre to that level. So create a total and grandparent level then divide child sum by grandparent total (LBM)

Need help with pop-up

Need help with this one. All of a sudden I keep getting a
pop-up saying "cannot locate file flash.ocx". What the heck is it
and how do I get rid of it. It is QUITE annoying. Any help would be
appreciated.

I am glad to hear that changing or disabling the screensaver
seems to fix this problem for most of us. Certainly, screensavers
are pretty antiquated and pointless on the newer computers out
there, but there are still some uses. Ever since I turned mine off
on one computer and switched to an older screensaver on my oldest
computer, I have not had this problem. And, unfortunately, I think
the problem is isolated to such a small fraction of screensavers
that adobe is just going to let those distributors take care of the
problem rather than spending the time to fix whatever glitch is
affecting them. The only downside is that once you figure out the
problem, which can take time and effort, you could lose a pretty
cool screensaver. All in all, that isn't much in the long run,
certainly not enough to get adobe involved.

I need your help with buying one of your software programs.

I need your help with buying one of your software programs.
First of all I do not want to join this “Creative Cloud” for a monthly plan.
Adobe Illustrator CS6 is what I am wanting but every time I click on the buy button is keeps sending me to a rent page to use but I don’t want this I want to buy it program for my own use. I don’t want to rent it I want to buy it like all the other Adobe software programs that I have bought from you in the past.
Can you help with problem?
Tim Adams
[email protected]

You can buy CS6 from this page
Creative Suite 6

Need help with installing on Photosmart C7280 all-in-one

I did have my printer installed, and was using the printer for 3 laptops wireless within my home. Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless. I do not know what happened, but the fax for this printer is listed, just not the printer itself. please help!
This question was solved.
View Solution.

Click here to download the software for your printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
chose the appropriate operating system that corresponds to your computer and download the full feature software.
Please click on KUDOS if you find my solution helpful.

Need help with Business One Implementation Consultant Certification

Similar Messages

Maybe you are looking for