Need help with capturing live performance with 2 cameras

I captured a live performance with two different cameras, one was AVCHD the other in DV. In Adobe, is there a way to down convert the large AVCHD to match the HD so that I can do a multi-camera edit? Here are the specs of the videos
Here are the two camera specs:
Type: AVI Movie
File Size: 5.7 GB
Image Size: 720 x 480
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;26;58;23
Average Data Rate: 3.6 MB / second
Pixel Aspect Ratio: 0.9091
and
Type: MPEG Movie
File Size: 1.9 GB
Image Size: 1920 x 1080
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:16:04:02
Average Data Rate: 2.0 MB / second
Pixel Aspect Ratio: 1.0

I don't do HD, but a couple of saved links
Convert AVCHD to HDV http://forums.adobe.com/thread/390605?tstart=0
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html

Similar Messages

  • Need help in optimising the performance of a query

    Need help in optimising the performance of a query. Below is the query that is executed on TABLE_A, TABLE_B and TABLE_C with record counts as 10M, 10m and 42 (only) respectively and it takes around 5-7 minutes to get 40 records:
    SELECT DISTINCT a.T_ID_, a.FIRSTNAME, b.T_CODE, b.PRODUCT,
    CASE WHEN TRUNC(b.DATE) +90 = TRUNC(SYSDATE) THEN -90 WHEN TRUNC(b.DATE) +30 = TRUNC(SYSDATE) THEN -30 ELSE 0 END AS T_DATE FROM TABLE_B b
    INNER JOIN TABLE_A a ON (a.T_ID_ = b.T_ID_) LEFT JOIN TABLE_C c ON b.PRODUCT = c.PRODUCT
    WHERE b.STATUS = 'T' AND (b.TYPE = 'ACTION'
    AND ( TRUNC(b.DATE) + 1 = TRUNC(SYSDATE) ) ) AND b.PRODUCT = 2;
    Note: Indices on the join columns are available in the respective tables
    Please let me know if there is any better way to write it.
    Edited by: 862944 on Aug 18, 2011 9:52 AM

    862944 wrote:
    Need help in optimising the performance of a query. Below is the query that is executed on TABLE_A, TABLE_B and TABLE_C with record counts as 10M, 10m and 42 (only) respectively and it takes around 5-7 minutes to get 40 records:
    SELECT DISTINCT a.T_ID_, a.FIRSTNAME, b.T_CODE, b.PRODUCT,
    CASE WHEN TRUNC(b.DATE) +90 = TRUNC(SYSDATE) THEN -90 WHEN TRUNC(b.DATE) +30 = TRUNC(SYSDATE) THEN -30 ELSE 0 END AS T_DATE FROM TABLE_B b
    INNER JOIN TABLE_A a ON (a.T_ID_ = b.T_ID_) LEFT JOIN TABLE_C c ON b.PRODUCT = c.PRODUCT
    WHERE b.STATUS = 'T' AND (b.TYPE = 'ACTION'
    AND ( TRUNC(b.DATE) + 1 = TRUNC(SYSDATE) ) ) AND b.PRODUCT = 2;
    Note: Indices on the join columns are available in the respective tables
    Please let me know if there is any better way to write it.
    Edited by: 862944 on Aug 18, 2011 9:52 AM[When Your Query Takes Too Long|https://forums.oracle.com/forums/thread.jspa?messageID=1812597]

  • Please i need help to how to recover my camera roll photos i deleted them yersterday by accident im need with the ipod and i took the pictures with ipod but i want to know how to recover my photos in a easy fast FREE way as soon as porssible pleasse???

    please i need  help to how to recorver my cameral roll photos from my ipod in a easy FREE way as soon as possible

    Restore from backup if they are in a backup. Otherweise I know of no free way. These are paid and no one has said that they worked.
    iPhone Recovery Stick - recover deleted text messages & more
    Recover files from iPod Touch | Restore data iPod | iPod touch undelete, unformat

  • Need help in Creating DB manually with OFA

    Hi,
    I want to create database in 10g manually and for this purpose
    I need help.
    since we can use OFA for storing Control files, and redolog file
    and datafile by describing them in Create database command but
    how to store any instance related file like spfile, pfile or network
    related file.
    once the oracle 10g database software is installed then if we want
    to create database then how can we separate the database file and
    all other instance files from software binaries because I've noted
    that creating database with DBCA create all instance files along with
    binary files of the software although DBCA give you option of creating
    database related file in some other location/directory.
    kindly help me in this I want to achieve above task in compliance with
    OFA
    Thanks and Regards,
    D.Abbasi

    Abbasi wrote:
    Hi,
    I want to create database in 10g manually and for this purpose
    I need help.
    since we can use OFA for storing Control files, and redolog file
    and datafile by describing them in Create database command but
    how to store any instance related file like spfile, pfile or network
    related file.
    once the oracle 10g database software is installed then if we want
    to create database then how can we separate the database file and
    all other instance files from software binaries because I've noted
    that creating database with DBCA create all instance files along with
    binary files of the software although DBCA give you option of creating
    database related file in some other location/directory.
    kindly help me in this I want to achieve above task in compliance with
    OFA
    Thanks and Regards,
    D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
    As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
    BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
    Edited by: EdStevens on Aug 16, 2009 8:46 PM

  • Need help. importing pictures to timeline with various length.

    Need help cant find old toturial
    I am trying to make a template for a picture movie where i have everything ready so i just need to add 250 pictures and then it will automaticly shift the pictures to the beat of the music. I once saw a toturial how to do this but cant find it. it was something with manually setting markers at the music beat and then just add all the pictures. but i must have missed something pls help..
    Bo

    Its called automate to sequence with unnumbered markers.
    http://tv.adobe.com/watch/learn-premiere-pro-cs5/gs04-making-a-rough-cut-in-adobe-premiere -pro/
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html

  • Need help in installing JBOSS along with Jdk version

    Hi,
    I am using Linux 64 bit Machine.
    I have Jdk1.5.0_18 and jboss-4.2.3.GA installed in my machine.
    But the JBOSS Server is failed in booting.
    What version of JBOSS Server needed for the 64 bit along with Jdk1.5.0_18
    Any help will be needful for me
    Thanks and Regards

    The name of this forum is "Database - General" not JBOSS, JDK, or "anything goes."
    Please delete this post and post your question in the appropriate forum.
    Thank you.

  • Need Help Please: Audigy2 Value conflict with onboard sound

    <SPAN class=postbody>System info: Windows XP Home Edition, 2.4 GHz IntelPent4, 52MB of RAM; DDR 200(33MHz), MSI MS-6547 (645 Ultra) motherboard. I need help! Sigh...well I am trying to put in a Soundblaster Audigy2 into my computer. I am under the impression that I have to disable and remove all onboard sound b/c it conflicts with the new sound card, ?. I currently have onboard sound ( AC97 Audio Controller ). I went to add/remove programs and removed the AC97 from there. I also went to MyComputer/Properties/Hardware/DeviceManager/Sound,Video,andGameControllers/AC97AudioContoller and deleted it. st Question: Under DeviceManager/Sound,Video,GameControllers...Do I need to remove the Legacy Audio Drivers? I know that I have to delete the rest of the drivers for AC97 and out of chance would Legacy be those drivers? I am guessing no...Also, is there anything else that I have to delete for the on board sound program to be gone? 2nd Question: I went to BIOS, and since I have windows XP home edition I think that configuration is a little different from what I read(I wont bore you with that). So, where do I go to "disable" the onboard sound in BIOS for Windows XP HomeEdition? Also, I read something about making sure the "Chip" was disabled but I could be paranoid. Do I need to worry about that? If you made it through all that text I thank you dearly. I hope that I can get some help from someone b/c I know nothing. I am afraid of making the wrong choice on BIOS and messing everything up. Thank You so Much! Ross Message Edited by RossRude3 on 04-06-2005 0:48 AM

    Ross,
    To fully disable teh onboard audio you would need to go into the BIOS to disable the Onboard Audio chip there. The manual with your motherboard or PC should have more detail on where exactly to find this setting, as it will differ per BIOS type. Generally it should be under a heading like Integrated Peripherals, and should be marked as the Onboard Audio chip, or AC97 Audio.
    Cat

  • Need help in Custom component creation with cq

    Hi,
    I have created my own component in adobe cQ and able to drag an drop in any page. for each instance I am seeing the copy of
    component under node /content/mypage/commoncomp. If I edit the properties using design dialog  I can able to store values as
    expected.
    Need help in
    1) When I drag and drop the component it shows null for the property by deafult if I click save on edit dialog then the
    value is showing. The default value is not shown by default while drag and drop my component it requires atleast one time to
    click save from dialog using design mode
    2) I need to use the default properties of the orginal components which is root and use the duplicated properties if incase user edit the properties of duplicated component. This may be too messy.... to be more clear
    I want to use a common component in many pages but the properties of the components should be updated only when user edit it in design dialog utill then I need the page to use properties of root component.
    Thanks

    You just need to create your own version of PlumtreeTopBarView (original in com.plumtree.common.uiparts), and use CustomActivitySpace.xml to override that view with your own view. Your version would use some kidn fo logic to determine whether or not to display certain elements. TheUI Customization Guide should help quite a bit, and we have several quickstarts for overriding views you can start from.
    Is there some Help file in PT that I can reference that will enable me to find what namespace does GetRequestURL() belongs to?I would simply do a string compare. Tokenize the URL into the base address / control arguments, perhaps splitting on the "?" symbol; then tokenize the base address on the ".". You'll end up with three strings. For portal.plumtree.com, the three strings would portal, plumtree, and com. You can then use those string in the logig you add to PlumtreeTopBarView.
    David Phipps
    Plumtree Software

  • Need help for SB Live

    Need help for SB Li've CT4850 driver for windows 7. Thanks

    Hi,
    I don't think there is a Windows 7 driver for this model. If you just purchased this card, I suggest you take it back to store for something newer.

  • Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

    Hello - I recently got Comcast Xfinity service.  We had switched from a different service.  Our wifi service was never great, but prior to Xfinity, it worked decently.  But now that we have Xfinity, our wifi is much worse and very unreliable.  I am seeking advice on how to setup my various Apple wifi devices in my home.   I have attached a diagram that illustrates what I am dealing with.  We have a large old house with stone walls.  Comcast does not support this issue. 
    To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor.  The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch.  I already have ethernet cables running from the network switch in the basement to various locations throughout the house.  So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices.  The dark lines running from the network switch to the various devices represents ethernet cable.
    The immediate problem that we are having is that we are unable to connect to our wifi networks.  The networks show on my mac laptop and my iPhone, for example, but I am unable to connect.  I know that I am inputting the correct password, but most of the time, we cannot get in.  Sometimes we can..... Very frustrating!  Also, due to the fact that I setup what I have over several years, I have multiple network names.  I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
    Here is what I am looking to accomplish:
    1. Seamless wifi access throughout our house.
    2. One name for our wifi network.  Right now we have multiple names for multiple networks.  Just want to simplify and have only one network.  (I guess that an additional "guest network" would be ok, but not absolutely necessary.
    Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this.  Just tell me how to do so.
    I have no idea how where to start or how to set this up.  I imagine that I would need to disconnect everything and reset and start from scratch?  Can someone tell me what I should do?  Even general advice would be helpful, but the more specific, the better, given my limited understanding.  Any help or advice would be greatly appreciated.
    Thanks in advance!

    Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
    Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Need help on enhancement of 0CO_OM_OPA_1 with Material and Plant

    Hi,
    I have a requirement that need to build a BW report which shows Actual costs and Planned Costs of Service Orders. We are getting Actual costs from 0CO_OM_OPA_6 and now i am getting planned costs from 0CO_OM_OPA_1. For actual costs we are getting Service Orders, Material and plant from Satandard DS 0CO_OM_OPA_6. Where as For Planned Costs standard data source 0CO_OM_OPA_1 is not having Material and Plant information. For this we decided to enhance 0CO_OM_OPA_1 with Material and Plant.
    But we are not sure the source tables for material and plant and the logic to extract these data from the tables. Can anybody please help me out.
    Thanks for your supprt in advance.

    It's possible you may need to use a CO-PA (profitability analysis) datasource instead of 0CO_OM_OPA_6.  0CO_OM_OPA_6 extracts data from CO tables. 
    Based on the path you provided "...Profit. segment...", the requested data might exist with CO-PA.
    If you determine the required data resides in CO-PA, you'll have to create a datasource based on the operating concern.  You can perform a search within the online docs for steps to create this datasource.
    Hope this helps.
    Rod

  • Need Help Setting Up Raid Card with Windows xp pro 64 bit

    I need a 64 bit driver for my k8t neo-fis2r motherboard. I tried to use the disk that came with the board, but I keep getting an error. please help.

    go to the via website and download the via 5.00a package, it contains a driver for the onboard via controller!
    dont try the promise one, it wont work! tried it several times! we have to wait for an updated driver to be able to use it!

  • Need help installing OS on iMac with no OS

    Hi,
    I just bought an iMac G4 15" Flat panel 800 mhz from the University of Wisconsin Madison. They surplus computers often but they have to strip all software off including operating systems. They have reassured me that this one works it just needs to have the OS installed.
    I have a full install family pack for OS X 10.1 (for powermac g4's) and have been trying to install it by holding down the "c" key after the chime. The problem is that the keyboard lights up initially but then it acts dead. I've tested the keyboard with other computers and it works fine. The usb hubs work fine too. I believe it's because it doesn't have an operating system that nothing is registering. I just get the beautiful flashing question mark face. The drive is CD-RW/DVD-Rom and it definitely sounds like it's working. I've gone into open firmware and had to do "eject cd" because the cd won't eject when pressed on the keyboard (because like i said earlier, the keyboard acts dead). this type of iMac doesn't seem to have any way to open the cd other than the keyboard. I'm ultimately going to put Tiger on it since i have a family pack upgrade but i need to get the first OS on before i can do anything. I'm considering using firewire target mode and copying something from one of my other mac's just to get it started.
    If anyone can help, it would be very appreciated! I have searched the discussions and when people have asked how to install the OS respondents simply say "it's probably a stolen computer" or "it probably doesn't work". I know this computer is legit - it came from a computer lab at the UW-Madison. Thank you!!

    "I wasn't trying to install the Powerbook software but the PowerMac software that i use on my G4's. The iMac says it's a Powermac G4 iMac so i thought it would work."
    No, same difference. If those disks are not for the G4 iMac, they will not work.
    I would just wait for the Tiger disks to arrive.
    BTW, if you have less than 512MB of RAM, I would strongly recommend that you upgrade to at least that much. Tiger is a pretty RAM hungry OS and will want at least 512MB.

  • Nomad Jukebox Zen Xtra: Need help getting it to work with Vis

    Does anyone know if the Zen Xtra will work with Windows Vista 32-bit's? I have tried installing the software that came with my MP3 player on my laptop that runs with Vista and it just doesn't work. Are there new drivers that I need? Please help!

    i just found another, easier way to make you zen xtra work with windows vista
    go to the support page and download the oldest driver, i think it's version .30 or somehting like that
    install that- it should prompt you to overwrite a newer version of the driver, if it does, say ok
    vista might then ask you if it installed correctly, say no, and run the installation in compatibility mode
    then download the oldest version of nomad explorer, and install that
    instead of using the preset instalation directory, select browse
    i'm not sure if this has any effect, but i think some of the folders are renamed for vista
    when the installation is finished, select "restart my computer now"
    if you wait, it may not work properly
    this should get nomad explorer running properly with vista
    if you don't like this program and prefer creative media source organizer, you can now transfer your music to your harddri've and update your firmwar, without having to worry about external storage, a dual boot system, or any of those messy options

  • Need help setting up a network with new Airport Extreme

    Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

    rmunoz274 wrote:
    I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
    thanks!!
    i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
    as far as the AEBS is concerned, you did not use it in bridge mode at all?
    i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
    thanks, and yaeh last time my network took me a bit of time as well!!
    what kind of encryption are you running?
    thanks

Maybe you are looking for