Need help with cisco 881 configuration.
Hi, I have cisco 881 wireless router, and I need to configure this as a switch, I have dhcp server in network 192.168.12.254, and I need that cisco wifi and lan clients get IP addresses from existing dhcp server.
I connect wire from network (with dhcp server) to FastEthernet0, create vlan interface (192.168.12.10 255.255.255.0), described vlan on other FastEthernet interfaces, so LAN clients get IP addresses from my dhcp server without problems, but how to do the same with wifi clients?
Follow this support doc because you need to trunk the AP to the router and specify the vlan the wireelss clients will be on.
https://supportforums.cisco.com/docs/DOC-16145
Here is a doc that guides you through multiple vlans/subnets on access points:
https://supportforums.cisco.com/docs/DOC-14496
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Similar Messages
-
Hello
I'm having some trouble configuring a cisco 881. I'm building a lab where I connect 2 cisco 881 through the fe4 interface (Wan port), and then connect to each router a PC, at interface fe0 (Lan port). The idea was to establish connection and implementing a static route between the 2 routers.
As a default the 881 has dhcp enabled on VLAN1 (10.10.10.0/24). So I set the pc's to get Ip's automatically. On Router A, I changed the dhcp pool so that I had a different network (11.10.10.0/24). So I have PC1 (11.10.10.2) connected to Router A on interface fa0. Router A connects to Router B through the fe4 interfaces (WAN ports). And PC2 (10.10.10.0/24) connects to Router B on fa0 interface.
I assigned an ip address to fe4 on Router A (192.168.10.1/24) and an ip address to fe4 on Router B (192.168.10.2/24).
At last I configured the static routes on both routers.
On Router A : ip route 10.10.10.0 255.255.255.0 192.168.10.2
On Router B : ip route 11.10.10.0 255.255.255.0 192.168.10.1
With everything configured I tested the connections.
PC 1 to its gateway: successful
PC 1 to 192.168.10.2: successful
PC1 to the gateway of PC2(10.10.10.1/24): successful
PC 1 to PC 2: failed
PC 2 to its gateway: successful
PC 2 to 192.168.10.1: successful
PC2 to the gateway of PC1(11.10.10.1/24): successful
PC 1 to PC 2: failed
Well this is the scenario. I really don’t understand the problem. I thing I did everything right, but I simply don’t get the result. Is there an error with my configuration or is this simply not doable?
Thanks a lot.Have you checked that the firewalls are turned off? If you can ping the far side, that tells me you have a default gateway configured on the workstation and that the far side router has a route back to you. The only thing left would be firewalls need to be turned off on the workstations.
HTH,
John
*** Please rate all useful posts *** -
Need help with Cisco Interface Cards???/
Hi, I purchased 4 WIC-1AM cards for my cisco 1760 gateway to use with cisco call manager server. I'm trying to figure out if I can even use these cards for voice cards to make calls inbound and outbound. I'm seing that the cards that CM gives me are all VIC cards listed and i don't see any WIC cards listed in the endpoint list on the CM for the gatway. So can I even use these cards for what I'm trying to do??? Please help???
ThanksIf i got the vontage sip account how would i hook it up to my CM Sever?
I'm using a 1760 gatway, what is a DSP resource?
When i do show diag I get this from my router:
show diag
Slot 0:
C1760 1FE VE 4SLOT DV Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 5.0
PCB Serial Number : FOC08077JDP
Part Number : 73-7167-05
Board Revision : B0
Fab Version : 04
Product (FRU) Number : CISCO1760
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 16 41 05 00 C1 8B 46 4F 43 30 38 30
0x10: 37 37 4A 44 50 82 49 1B FF 05 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Packet Voice DSP Module Slot 0:
Not populated
Packet Voice DSP Module Slot 1:
Not populated
WIC/VIC Slot 0:
One Port Modem WIC
Hardware revision 1.0 Board revision H0
Serial number 0034764142 Part number 800-08823-01
FRU Part Number WIC-1AM=
Test history 0x00 RMA number 00-00-00
Connector type WAN Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 38 01 00 02 12 75 6E 50 22 77 01 00 00 00 00
0x30: 88 00 00 00 06 02 10 01 FF FF FF FF FF FF FF FF
WIC/VIC Slot 1:
One Port Modem WIC
Hardware revision 1.0 Board revision H0
Serial number 0034764050 Part number 800-08823-01
FRU Part Number WIC-1AM=
Test history 0x00 RMA number 00-00-00
Connector type WAN Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 38 01 00 02 12 75 12 50 22 77 01 00 00 00 00
0x30: 88 00 00 00 06 02 10 01 FF FF FF FF FF FF FF FF
What do you think? -
All,
Background Information:
I am a network engineer and I manage a small business network. The network consists of a couple of 3750G access switches and 2 6503-E switches (one of these also serves as an access layer switch). I am looking to upgrade my IOS on my external facing switch so that I can use a 16 port 10Gbe ethernet module. In this switch, I have a SUP-720 3B in slot 1, a 16 fiber port 10Gbe ethernet moduld in slot 2 (not online yet), and a 48 copper port 1Gbe ethernet module. In the SUP-720, I have one CompactFlash card in disk0.
This is where I need help:
Like I said, I'm trying to upgrade my IOS software in order to support my new ethernet line card. I know that the images are stored in flash memory. However the IFS on my switch seems to be confusing. He is a print out of the cd ? command:
bootflash:
cns:
const_nvram:
dfc#3-bootflash:
disk0:
disk1:
flexwan-fpd:
null:
nvram:
sup-bootdisk:
sup-bootflash:
sup-image:
sup-microcode:
syslog:
system:
tar:
tmpsys:
<cr>
Can someone please tell me what all of these directories are used for???? I'm not sure where to store the IOS image. When I change directories to sup-bootflash: it looks like it has the same contents as sup-bootdisk. Also, when I list the contents in disk0:, sup-bootflash shows up in there. Is this just a soft link to that directory? I'm really confused and would like to know what all of these directories are used for. Does anyone know of a good white paper that explains the function of these directories?
Thanks,
MannyManny
I am not prepared to try to explain all the directories, which is a pretty good question. But I can answer the most important of your questions. Put the new image into sup-bootflash.
HTH
Rick -
Foot stand not provided with my replacement WRT-350N - need help with Cisco contact
Hi!
I am starting to feel like Michael Douglas in the movie Falling Down and need some help.
Story:
I finally sent in my faulty WRT-350N router and when I got the replacement everything but the plastic foot stand was included. I want to have my router standing up to save desk space but now I have no foot.
"OK, should not be hard to get Linksys to send me the missing foot stand" was my thought. Now I have called the RMA line and also emailed them and I get a similar answer like Michael Douglas got with a smile
I keep hearing that I cannot get the part since it is not on the product's content list. Like that is *my* problem. I just want the part and do not care whether it is on a list or not. It is the part on top of the router in the picture. I even asked the Linksys representative to Google a bit for WRT-350N and there are foot stands on almost all pictures and it is definitely included in the box. I was told I could go nowhere else for help either with this. I really doubt that but fail to find a channel to Linksys that may be able to help.
If some Linksys representative sees this please help me!
Thanks, Niklas
RMA XXXXX - missing router stand/foot
(Mod note: Edited for guideline compliance. E-mail conversation removed.)
Message Edited by kent07 on 07-01-2009 03:10 AM
Solved!
Go to Solution.Now it should be working. To moderators, this does not hold any personal info but just want to show the quite long text to read through for the RMA:
Thank you for contacting Linksys Customer Service Department. First of all, we would like to inform you that, if your item has been purchased less than 2 years ago, you have the possibility of replacing it through the place of purchase.
If you want to replace your item through Linksys, we are more than glad to provide you with our assistance. In order to create an RMA ( authorization number for the replacement under warranty), you can do it online at
https://linksysrma.moduslink.com/Consumer/pag/ChooseRegion.aspx.
On the other hand, if you prefer us placing the RMA, please reply to this email including the following information:
Name:
Last Name:
Company Name:
Street Address:
City:
Postal Code:
Day Time Phone Number:
Model (include version):
Serial Number:
Date of Purchase:
Place of Purchase (store):
Once the RMA is created, you will receive a confirmation e-mail with the RMA number on a shipping label ( not a prepaid, as the inbound shipping is up to the customer) and all the terms and conditions . You will have to print three copies of that label. The first copy you are going to stick it in the outside of the box, the second one you are going to join it in the inside of the box and the last one is a copy for you as assurance. Together with this e-mail it will also be included all the terms and conditions. We will strongly appreciate your reading them carefully before sending the item to us. In relation to this, it will be our pleasure to summarize some of the important conditions we state in order to clarify our standard procedure:
Please write down the RMA# ( not the case id#) on the outside of the box with big numbers and letters. Moreover, we recommend our customers to use a traceable shipping method in order to get a tracking number for the delivery. This number will be helpful to track the package in case of any potential inconvenience. Remember that you will have to pay just for the inbound shipping while Linksys will be responsible for the rest of the expenses.
Furthermore, remember to include all the accessories that were included in the original package: Power Supply, Cables, User Guide, CD's. Otherwise, warranty replacement will not be possible to be performed. All other accessories shipped that did not come in the original box may not be returned. Moreover, it is important to remember that you do not have to ship the original box. Also, include on the shipping box a copy of the proof of purchase, not the original.
IMPORTANT: -If your product is part of a network kit just send the defective unit.
If you have further questions do not hesitate to call us or replying to this e-mail. Our lines are open from Monday to Friday from 10 a.m. to 7 p.m. We recommend our customers to have the case id# handy.
Regards,
Linksys Customer Service - EMEA
Linksys does NOT offer refunds, substitutions, credits, or upgrades.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is not able to accommodate walk-in customers.
Processing the Defective Unit.
Package your return unit(s) in one box, please make sure the contents are secure and that enough packaging material is included to prevent the unit(s) from moving around during shipping.
Please ship the defective unit(s) to the address below.
Linksys RMA/SILS/ML
IJsseldijk 29 in Apeldoorn
7325 WZ Apeldoorn
The Netherlands
All original Linksys accessories, such as power adapters, couplers/dongles, and antennas MUST BE RETURNED with the product.
If you are replacing a product that belongs to a networking kit, only return the defective product listed on the previous web form belonging to the networking kit. Please do not include the working product.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is NOT responsible for lost or damaged personal accessories. If you have attached any accessories that did not come with the original product, please remove these items prior to returning your unit(s). In addition, if your product uses any internal fiber modules please also remove these items unless they are listed as one of the products on the RMA web form.
Linksys is not responsible for data stored on the hard drive of the defective unit. If the defective unit has a hard drive and it cannot easily be removed form the defective unit, backup your data prior to shipping the defective unit to Linksys.
The customer bears the cost of sending the defective unit(s) to Linksys including all customs fees and applicable taxes.
A COPY of the proof of purchase must be included for all products. A valid proof of purchase includes a copy of the receipt, invoice, or packing slip from the retailer, or distributor. A copy of your credit card statement, internal requisition, or purchase order is NOT considered a valid proof of purchase. DO NOT SEND YOUR ORIGINALS.
Processing the Replacement Unit.
Linksys bears the cost of shipping the replacement unit to the CUSTOMER unless the expedited shipping option is chosen at the time the RMA is created.
Upon receipt of the defective unit, a replacement unit is usually shipped within 3-5 business days
Linksys ships replacement products via GLS ground to customers within the European Union. Non European Union Customer's replacements are shipped FedEx.
In the event of a backorder, units will ship when available, and the shipping method will remain the same as the option selected at the time the RMA was created.
If you wish to change the shipping method, YOU MUST contact the Linksys Customer Service department prior to the replacement unit being shipped. Once the unit has been shipped, the funds paid for expedited shipping cannot be refunded. The Customer Service phone numbers are listed below.
Once you receive your replacement unit, test the unit, and verify that it is working properly.
Damaged or missing part(s) must be reported within five business days of receiving the replacement unit(s).
IMPORTANT: If your unit uses a power supply, make sure to use the power supply that comes with the replacement unit, and not the original power supply.
COUNTRY
PHONE NUMBER
Austria
01360 2772061
Belgium
02 627 7077
Czech Republic
800 800156
Denmark
82 332729
Finland
0800 523062
France
0800 881 026
Germany
0800 1013311
Hungary
06 80 204 548
Iceland
44 207 660 0121
Ireland
1 800 818 188
Italy
02 38 591012
Lithuania
44 207 660 0121
Luxembourg
32 2-627-7077
Malta
44 207 660 0121
Netherlands
0800 020 0101
Norway
235 00060
Poland
00800 331 1345
Portugal
213 180 081
Spain
900 902 207
Sweden
0851 992 251
Switzerland
022 5675 330
Turkey
212 444 2726
United Kingdom
0800 026 1418 -
Need help with Cisco X.25 to Lucent 5ESS EDAS (Traffic Channel) using the Telco DCN network document
Hello everyone,
Does anyone have any experience in troubleshooting EDAS using JDSU's NetOptimize traffic collector?
Layer 1/2 is established but when the application sends a HEX 53 on PVC 1 we do not see traffic coming back on PVC3.
we are using the standard Telco DCN setup by don Schriner and configured per Lucent's cpblx3 configs
any help is appreciatedHello everyone,
Does anyone have any experience in troubleshooting EDAS using JDSU's NetOptimize traffic collector?
Layer 1/2 is established but when the application sends a HEX 53 on PVC 1 we do not see traffic coming back on PVC3.
we are using the standard Telco DCN setup by don Schriner and configured per Lucent's cpblx3 configs
any help is appreciated -
Dear Sir,
good day , i have a Cisco router model 1601 and i forget my enable secret
when i login with consol to reset the password and i follow all steps you mention in your support web site and type reset at end of steps to reload again and access my router
i suddenly found my router do not reponds to consol or evern ping or telnet
my router is ON and system LED is working ( OK ) but no responds to any thing
plz advice how to solve this problem and why it happen
appreciated send your reply soon for so urgent
regards
Mourad Azizmay be you changed the console rate from 9600 to other settings. try to modofy console speed, parity,...
try also to connect a sniffer to ethernet port and capture packets coming from router may be this will guide you and give you more idea. -
Need help with how to configure jumpers on new HD
I'm replacing the Hard Drive in an iMac 350 with the same type of Seagate HD I just replaced in my cube.
I have a question about the jumber arrangement. On the old Apple HD [that came out of the iMac], with the Apple sticker face down on the table, there are 5 sets of jumpers. On the HD that came out of the iMac, from the left on the top the second and third pins have the jumper on them only.
On the new Seagate 120 drive, it only has 4 sets of pins. From the factory and from the left, the third top and third bottom pins have a jumper attached.
Obvioulsy, I want to switch the jumper on the Seagate drive so that it will be like the drive that came out of the iMac. The fact that the Seagate has only 4 sets of pins is a bit confusing to me. Should I reconfigure the jumper on the Seagate so that working from the left the top second and thrid pins have the jumper across them.Mac OS X only wants to install and boot from a Master drive.
http://seagate.com/support/kb/disc/ref/jumper_settings.html -
Need help with dual display configuration
I have just connected a HD, widescreen monitor to my Mac tower and am having trouble getting video from FCP to show up on it. It's connected to the mini port and is displaying the same desktop image as my primary monitor but I can't seem to get it to display the video when editing. What am I missing?
The "mirror" box was already unchecked. The best I could get after trying every conceivable combination was just one frame at a time whenever I stopped playing the timeline. The screen then refreshes to show whatever that last frame is, but it will not play the video, it just displays the very last frame.
-
NEED HELP WITH WORKFLOW CONFIGURATION
I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tell me what I need to do to get these requirements fulfilled.
1) Description:
This is a workflow requirement to serve as a reminder of upcoming investment
maturities.
Requirements Details:
Create a workflow to serve as a reminder of upcoming investment maturities.
Donor System Processing Narrative:
Read the maturity dates on investments.
Target System Processing Narrative:
Send a notice to the parties that an investment will be maturing soon.
2) Description:
Implement workflow to route invoice receipts using a one time vendor for management
review and posting
Desired Functionality:
If a one time vendor is entered by the AP Voucher Clerk the invoice will be automatically
parked by the program and a workflow notification triggered to the Accounting
Supervisor and Accounting Manager (backup). The Accounting Supervisor will review
the parked document and imaged copy of the actual invoice and post the parked
document.
3) Description:
An approval workflow is needed for credit memos posted to SAP customer accounts.
Desired Functionality:
The Cash Journal Clerk will post a credit memo to the customer account using transaction
FV75 Park Customer Invoice. This transaction will automatically trigger a workflow to
the Accounting Manager for approval and then to the CFO who will approve and post the
parked document. (In order for this transaction to automatically trigger what configuration needs to be done).Bob;
You can borrow the example code that ships with both NI-DAQ (in case you are doing NI-DAQ function calls) and Labview. The best examples to start with are the ones that have the prefix STC.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments -
I need help with Mavericks Server: an error occurred while configuring your server. I
I need help with Mavricks Server, I get the following: an error occurred while configuring your server. I have deleted the Server.app several times along with the associated com.apple and Server folder. Any more help would be appreciated.
There are usually some log files around, related to the installation. See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.
-
Need help with AS8 configuration
Our present situation is like this:
AS7 with single domain and multiple server instances
instance A running on port xxx containing app1
instance B running on port yyy containing app2
instance C running on port zzz containing app3
Now, when I move to AS8.1 PE, I dont see the option to create a server instance inside a domain. I need to create 3 domains in order to accomplish the same task as above. Not only that, now I need to login to 3 different admin servers to manage the 3 apps on 3 ports
I need help with some options I can use
thanksI'm not sure but i think that on 8.1 pe you can have only one server instance by default...
But you can olso try by command line tool asadminin [installdir soas]/binuse:
asadmin --help for a list of commands available.
In the list should be create-instance to create a stand alone instance.
Hi
Stefano -
Need help with BARS 4.0.12 - 4.0.13 upgrade
Hello,
I'm a VoIP noob and need help with a BARS upgrade. To resolve a known problem (Bug #CSCsi32637) we need to upgrade BARS from 4.0.12 to 4.0.13. This is per TAC. However, no one in our company has done this before. I've reviewed the 4.0.12 Admin Guide since I was unable to find any admin docs for 4.0.13. However, I have several questions about this upgrade that hopefully someone here can help with:
1) The install for 4.0.12 requires a reboot of the server. Is this the same for 4.0.13?
2) CCM version is 4.1(3)sr6; any problems known with BARS 4.0.13 and this version of CCM? I didn't see
anything in the Rel Notes or via the Bug Toolkit (figure it never hurts to ask).
3) Will the previously input configuration settings (i.e., Data Source Servers, Storage Location, Schedule) be preserved or will I have to reinput these settings?
4) Any known issues with performing this upgrade while controlling the server via VNC?
5) The 4.0.12 docs state that "To successfully back up the Cisco Unified CallManager database, the backup server and backup targets must exist in the same cluster and have the same version of BARS installed". So BARS must be installed on my publisher (the Backup Server) AND my three subscribers? I'm not finding BARS on these subscribers now.
Many Thanks for any input,
Brian Read1) Yes, any version requires reboot after install
2) not that i'm aware of
4) you'll need to reconfigure it
5) no
6) although it's recommended there is no real need to backup any other server than the PUB which contains the master DB, any SUB only needs to pull the info from PUB in case of crash and reinstall
HTH
java
if this helps, please rate -
I need help with my EtreCheck report
Hi All -
Thanks for taking the time -
I NEED HELP WITH MY EtreCheck report
Problem description:
running slow
EtreCheck version: 2.1.8 (121)
Report generated February 19, 2015 at 3:18:49 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 130
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:12:52
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (362.64 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) [Click for support]
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) [Click for support]
[not loaded] com.sony.protocol.prodisc (2.3.0) [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
User Launch Agents: ℹ️
[failed] [email protected] [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.jdibackup.ZipCloud.autostart.plist [Click for support] [Click for details]
[loaded] com.jdibackup.ZipCloud.notify.plist [Click for support]
User Login Items: ℹ️
RED Watchdog Application (/Applications/REDCINE-X Professional/Utilities/RED Watchdog.app)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
iTunesHelper UNKNOWN Hidden (missing value)
QmasterStatusMenu Application (/Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app)
SpyderUtility Application (/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app)
Spyder3Utility Application (/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 8.1.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 [Click for support]
Flash Player [Click for support]
Growl [Click for support]
REDcode [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
10% mds
5% WindowServer
0% Google Drive
0% Google Chrome
0% fontd
Top Processes by Memory: ℹ️
172 MB Google Chrome
155 MB mds_stores
155 MB Mail
103 MB Google Chrome Helper
94 MB Google Drive
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.72 GB Active RAM
451 MB Inactive RAM
895 MB Wired RAM
1.30 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 19, 2015, 03:03:40 PM Self test - passedWhy Put it off I say ... Here you go Linc
Start time: 12:05:29 02/20/15
Revision: 1250
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 2:42
UID: 504
I/O wait time (ms/s)
kernel_task (UID 0): 39
Font issues: 263
Trust settings: admin 4, user 4
TCP/IP
Subnet mask: 255.255.252.0
Listeners
cupsd: ipp
nfsd: 1023
rpc.lockd: 1017
rpc.rquotad: garcon
rpc.statd: exp1
rpcbind: sunrpc
System caches/logs
3319 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-02 Mail crash
2015-02-04 Spyder3Utility crash
2015-02-20 Acrobat hang x3
2015-02-20 Final Cut Pro crash x2
HID errors: 22
Kernel log
Feb 20 10:20:53 Google Chrome He (map: 0xffffff801e1b7c30) triggered DYLD shared region unnest for map: 0xffffff801e1b7c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:31:10 ARPT: 3921.321063: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth request tx failed
Feb 20 10:41:10 Google Chrome He (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:14 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:30 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a960) triggered DYLD shared region unnest for map: 0xffffff802b72a960, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a3c0) triggered DYLD shared region unnest for map: 0xffffff802b72a3c0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff8023819f00) triggered DYLD shared region unnest for map: 0xffffff8023819f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff802cdb0e10) triggered DYLD shared region unnest for map: 0xffffff802cdb0e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8022da2e10) triggered DYLD shared region unnest for map: 0xffffff8022da2e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8023819b40) triggered DYLD shared region unnest for map: 0xffffff8023819b40, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 11:49:11 Google Chrome (map: 0xffffff802b72a2d0) triggered DYLD shared region unnest for map: 0xffffff802b72a2d0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb0780) triggered DYLD shared region unnest for map: 0xffffff802cdb0780, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63e10) triggered DYLD shared region unnest for map: 0xffffff8022a63e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63c30) triggered DYLD shared region unnest for map: 0xffffff8022a63c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb05a0) triggered DYLD shared region unnest for map: 0xffffff802cdb05a0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63f00) triggered DYLD shared region unnest for map: 0xffffff8022a63f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63690) triggered DYLD shared region unnest for map: 0xffffff8022a63690, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 12:08:01 ARPT: 8890.600067: MacAuthEvent en1 Auth result for: 00:19:92:35:7d:e1 Auth request tx failed
Feb 20 12:08:01 ARPT: 8890.950534: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth timed out
System log
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:25:05 airportd: _handleLinkEvent: WiFi is not powered. Resetting state variables.
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:49 WindowServer: WSBindSurface Invalid surface 723885656 for window 1311
Feb 20 11:29:13 fseventsd: event logs in /Volumes/WDA_1T/.fseventsd out of sync with volume. destroying old logs. (461 2 59825)
Feb 20 11:29:13 fseventsd: log dir: /Volumes/WDA_1T/.fseventsd getting new uuid: UUID
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasKeyAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasMainAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:41:24 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[1532]
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 12:01:17 WindowServer: WSGetSurfaceInWindow Invalid surface 710322265 for window 1327
Feb 20 12:04:39 fseventsd: implementation_removed_client: did not find client 0x7f9eec210660 for path = '/.docid'
Feb 20 12:11:28 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[2262]
Console log
Feb 15 12:07:08 ReportCrash: Invoking spindump for pid=644 wakeups_rate=158 duration=285 because of excessive wakeups
Feb 15 12:55:36 ReportCrash: Invoking spindump for pid=754 wakeups_rate=200 duration=225 because of excessive wakeups
Feb 15 13:59:55 ReportCrash: Invoking spindump for pid=913 wakeups_rate=186 duration=242 because of excessive wakeups
Feb 15 16:54:59 ReportCrash: Invoking spindump for pid=964 wakeups_rate=188 duration=240 because of excessive wakeups
Feb 16 10:35:10 ReportCrash: Invoking spindump for pid=1059 wakeups_rate=337 duration=134 because of excessive wakeups
Feb 16 10:51:21 ReportCrash: Invoking spindump for pid=1080 wakeups_rate=161 duration=280 because of excessive wakeups
Feb 16 11:59:13 ReportCrash: Invoking spindump for pid=1168 wakeups_rate=243 duration=186 because of excessive wakeups
Feb 16 12:02:57 ReportCrash: Invoking spindump for pid=1175 wakeups_rate=382 duration=118 because of excessive wakeups
Feb 16 13:07:53 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.ic.searchinstaller/Cache.db is NOT valid. Unable to determine schema version.
Feb 16 13:07:53 nsurlstoraged: ERROR: unable to determine file-system usage for FS-backed cache at /Users/USER/Library/Caches/com.ic.searchinstaller/fsCachedData. Errno=13
Feb 16 13:22:31 ReportCrash: Invoking spindump for pid=2237 wakeups_rate=326 duration=139 because of excessive wakeups
Feb 16 14:17:37 ReportCrash: Invoking spindump for pid=2420 wakeups_rate=228 duration=198 because of excessive wakeups
Feb 16 14:33:29 ReportCrash: Invoking spindump for pid=2438 wakeups_rate=240 duration=188 because of excessive wakeups
Feb 16 14:46:36 ReportCrash: Invoking spindump for pid=2454 wakeups_rate=305 duration=148 because of excessive wakeups
Feb 17 12:58:26 ReportCrash: Invoking spindump for pid=2894 wakeups_rate=689 duration=66 because of excessive wakeups
Feb 17 13:13:41 ReportCrash: Invoking spindump for pid=2914 wakeups_rate=487 duration=93 because of excessive wakeups
Feb 17 16:54:57 ReportCrash: Invoking spindump for pid=1965 wakeups_rate=162 duration=278 because of excessive wakeups
Feb 18 13:50:58 ReportCrash: Invoking spindump for pid=3869 wakeups_rate=160 duration=282 because of excessive wakeups
Feb 19 08:17:10 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 14:59:30 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:04:57 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:18:06 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
Feb 19 16:50:23 ReportCrash: Invoking spindump for pid=3308 wakeups_rate=189 duration=239 because of excessive wakeups
Feb 20 09:24:49 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Daemons
com.adobe.fpsaud
com.adobe.versioncueCS3
com.ambrosiasw.ambrosiaaudiosupporthelper.daemon
com.apple.watchdogd
Agents
[email protected]
- status: 78
com.apple.Finder
- status: -15
com.google.keystone.user.agent
com.jdibackup.ZipCloud.autostart
- status: 1
com.jdibackup.ZipCloud.notify
- status: 1
User login items
RED Watchdog
- /Applications/REDCINE-X Professional/Utilities/RED Watchdog.app
GrowlHelperApp
- /Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app
GrowlHelperApp
- /Users/USER/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelp erApp.app
iTunesHelper
- missing value
QmasterStatusMenu
- /Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app
SpyderUtility
- /Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
Spyder3Utility
- /Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
Google Drive
- /Applications/Google Drive.app
Google Chrome
- /Applications/Google Chrome.app
Firefox extensions
Live PageRank
Web Developer
Exif Viewer
iCloud errors
bird 418
cloudd 65
Continuity errors
sharingd 21
Restricted files: 335
Lockfiles: 48
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS3.plist
- mod date: Oct 20 14:05:00 2009
- checksum: 714202969
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS3</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS3</string>
<key>UserName</key>
<string>root</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist
- mod date: Dec 21 11:32:33 2012
- checksum: 1980407752
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.ambrosiasw.ambrosiaaudiosupporthelper.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Extensions/AmbrosiaAudioSupport.kext/Contents/MacOS/amb rosiaaudiosupporthelper</string>
</array>
<key>KeepAlive</key>
<false/>
<key>Disabled</key>
<false/>
<key>LaunchEvents</key>
<dict>
<key>com.apple.iokit.matching</key>
<dict>
<key>AmbrosiaAudioSupport</key>
<dict>
<key>IOMatchLaunchStream</key>
<true/>
<key>IOProviderClass</key>
<string>com_AmbrosiaSW_AudioSupport</string>
</dict>
...and 4 more line(s)
Contents of /Library/LaunchDaemons/com.apple.qmaster.qmasterd.plist
- mod date: Aug 25 21:24:23 2010
- checksum: 681742547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.qmaster.qmasterd</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/qmasterd</string>
</array>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /private/etc/hosts
- mod date: Sep 20 11:46:00 2013
- checksum: 1921340845
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Contents of Library/LaunchAgents/[email protected]
- mod date: Sep 15 12:18:45 2009
- checksum: 2526625188
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>[email protected]</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>LowPriorityIO</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
<string>-l</string>
<string>/Users/USER/Library/Logs/[email protected]</string>
<string>-u</string>
<string>@me.com</string>
<string>-t</string>
<string>SharedServices</string>
<string>-s</string>
</array>
...and 4 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
- mod date: Nov 28 13:56:29 2014
- checksum: 3826001454
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.autostart.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 2356528749
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.autostart</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>-n</string>
<string>--args</string>
<string>9</string>
<string>-l</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.notify.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 1841511774
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.notify</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>--args</string>
<string>7</string>
<string>1</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>StartInterval</key>
<integer>1200</integer>
<key>RunAtLoad</key>
<false/>
</dict>
</plist>
Extensions
/System/Library/Extensions/AmbrosiaAudioSupport.kext
- com.AmbrosiaSW.AudioSupport
/System/Library/Extensions/FAMProtocol.kext
- com.sony.protocol.prodisc
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/prodisc_fs.kext
- com.sony.filesystem.prodisc_fs
Applications
/Applications/Adobe Acrobat 8 Professional/Acrobat Distiller.app
- com.adobe.distiller
/Applications/Adobe Acrobat 8 Professional/Acrobat Uninstaller.app
- com.adobe.Acrobat.Uninstaller
/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app
- com.adobe.Acrobat.Pro
/Applications/Adobe Bridge CS3/Bridge CS3.app
- com.adobe.bridge2
/Applications/Adobe Device Central CS3/Device Central.app
- com.adobe.devicecentral.application
/Applications/Adobe Dreamweaver CS3/Dreamweaver.app
- com.adobe.dreamweaver-9.0
/Applications/Adobe Extension Manager/Extension Manager.app
- com.adobe.ExtensionManager
/Applications/Adobe Fireworks CS3/Adobe Fireworks CS3.app
- com.macromedia.fireworks
/Applications/Adobe Flash CS3 Video Encoder/Adobe Flash CS3 Video Encoder.app
- com.macromedia.FLVEncoder
/Applications/Adobe Flash CS3/Adobe Flash CS3.app
- com.adobe.flash-9.0-en_us
/Applications/Adobe Flash CS3/Players/Debug/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Debug/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Flash CS3/Players/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Help Viewer 1.0.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Help Viewer 1.1.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Illustrator CS3/Adobe Illustrator.app
- com.adobe.illustrator
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
- N/A
/Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app
- com.adobe.Photoshop
/Applications/Adobe Premiere Pro CS3/Adobe Premiere Pro CS3.app
- com.adobe.AdobePremierePro
/Applications/Adobe Stock Photos CS3/Adobe Stock Photos CS3.app
- com.adobe.stockphotos-1.5
/Applications/Audacity/Audacity.app
- net.sourceforge.audacity
/Applications/Beak.app
- com.flyosity.beak
/Applications/Buzzbird.app
- org.buzzbird.buzzbird
/Applications/Celtx.app
- ca.greyfirst.celtx
/Applications/Datacolor/Spyder3Elite/Spyder3Elite.app
- com.datacolor.spyder3elite
/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
- com.datacolor.spyder3utility
/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
- com.datacolor.spyderutility
/Applications/Disk Inventory X.app
- com.derlien.DiskInventoryX
/Applications/Epson Software/Print CD/Print CD.app
- jp.co.epson.PrintCD2
/Applications/FileZilla.app
- de.filezilla
/Applications/FlashVideo Converter.app
- com.geovid.
/Applications/Gorilla Folder/Gorilla Program 4.0.0/Gorilla 4.0.0
- N/A
/Applications/HandBrake.app
- org.m0k.handbrake
/Applications/Levelator.app
- org.conversationsnetwork.levelator
/Applications/OpenOffice.org.app
- org.openoffice.script
/Applications/RecBoot.app
- com.lepidu.RecBoot
/Applications/Smultron.app
- org.smultron.Smultron
/Applications/TouchCopy.app
- N/A
/Applications/Uninstall MM Scheduling/Uninstall MM Scheduling.app
- N/A
/Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app
- "com.Adobe.ESD.AdobeUpdaterApplication"
/Applications/Utilities/Adobe Utilities.localized/ExtendScript Toolkit 2/ExtendScript Toolkit 2.app
- com.adobe.estoolkit-2.0
/Applications/Utilities/Bluetooth Firmware Update.app
- com.apple.updaters.btfirmwareupdate201
/Applications/Utilities/FAM Driver Tool.app
- com.sony.famdrivertool
/Applications/VLC.app
- org.videolan.vlc
/Applications/XDCAM Transfer.app
- com.sony.bprl.xdcamtransfer
/Applications/YouSendIt Desktop App.app
- com.yousendit.YouSendIt
/Applications/YouSendIt.app
- com.yousendit.YouSendItExpress
/Applications/gedit.app
- org.gnome.gedit
/Applications/iWork '08/Keynote.app
- com.apple.iWork.Keynote
/Applications/iWork '08/Numbers.app
- com.apple.iWork.Numbers
/Applications/iWork '08/Pages.app
- com.apple.iWork.Pages
/Developer/Applications/Utilities/MacPython 2.5/Build Applet.app
- org.python.buildapplet
/Developer/Applications/Utilities/Python 2.6/Build Applet.app
- org.python.buildapplet
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileAddressBook.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Game Center.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Camera.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/DataActivation.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Library/Application Support/Adobe/Adobe Asset Services CS3/AssetServicesCS3.app
- com.adobe.assetServicesCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3.app
- com.adobe.versioncueCS3.VersionCueCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3Status.app
- com.adobe.versioncueCS3.VCStatusMenu
/Library/Application Support/Adobe/Installers/UUID/Setup.app
- com.adobe.Installers.Redirector
/Library/Application Support/Adobe/Installers/R1/Setup.app
- com.adobe.Installers.Setup
/Library/Application Support/Intuit/QuickBooks/2007/JHandShake.app
- com.intuit.JHandShake
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
- com.microsoft.silverlight.sllauncher
/Library/Application Support/ProApps/MIO/RAD/Plugins/ReadMe(Image Handling Library).app
- jp.co.canon.DocumentLauncher
/Library/Application Support/iWork '08/iWork Tour.app
- com.apple.iWorkTour
/Library/Documentation/User Guides And Information.localized/Apple Hardware Test Read Me.app
- com.apple.AppleHardwareTestReadMe
/Library/Printers/EPSON/InkjetPrinter/AutoSetupTool/EPIJAutoSetupTool.app
- com.epson.ijprinter.EPIJAutoSetupTool
/Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app
- com.epson.ijprinter.rastertoescp
/Library/Printers/EPSON/InkjetPrinter/Utilities/EPSON Printer Utility3.app
- com.epson.ijprinter.Utility3
/Library/Printers/hp/Fax/fax.backend
- com.hp.fax
/Library/Printers/hp/Fax/rastertofax.filter
- com.hp.rastertofax
/Library/Printers/hp/cups/filters/pdftopdf.filter
- com.hp.print.cups.filter.pdftopdf
/Users/USER/Documents/iPhone Apps/Archivers/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/Archivers_test/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/DateCell/build/Debug-iphonesimulator/DateCell.app
- N/A
/Users/USER/Documents/iPhone Apps/EasyCustomTable/build/Debug-iphonesimulator/EasyCustomTable.app
- N/A
/Users/USER/Documents/iPhone Apps/Grids/build/Debug-iphonesimulator/Grids.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphonesimulator/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug/Metalsmith Suite.app
- com.yourcompany.Metalsmith-Suite
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Distrobution-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Scrolling/build/Debug-iphonesimulator/Scrolling.app
- N/A
/Users/USER/Documents/iPhone Apps/UICatalog/build/Debug-iphonesimulator/UICatalog.app
- N/A
/Users/USER/Documents/iPhone Apps/WebViewTutorial/build/Debug-iphonesimulator/WebViewTutorial.app
- N/A
/Users/USER/Documents/iPhone Apps/XML/build/Debug-iphonesimulator/XML.app
- N/A
/Users/USER/Documents/sites/nvrslp.com/dev/the_lab/ns_resize
- N/A
/Users/USER/Documents/sites/zoomify/Zoomifyer EZ v3.1/Zoomifyer EZ.app
- N/A
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_apdfllckaahabafndbhieahigkjlhalf/Default apdfllckaahabafndbhieahigkjlhalf.app
- com.google.Chrome.app.Default-apdfllckaahabafndbhieahigkjlhalf-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
- com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpebaehgfgkcmmjjknibibbjacnplim/Default blpebaehgfgkcmmjjknibibbjacnplim.app
- com.google.Chrome.app.Default-blpebaehgfgkcmmjjknibibbjacnplim-internal
/Users/USER/Library/Application Support/iPhone Simulator/3.1.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/WebViewTutorial.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Archivers.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/AnimatedGifExample.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/4.2/Applications/UUID/Spinspiration.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/XML.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/DateCell.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Scrolling.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Autoscroll.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Grids.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/TapToZoom.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/EasyCustomTable.app
- N/A
/Users/USER/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/octoshape/octoshape
- N/A
Frameworks
/Library/Frameworks/REDCODE.Color.framework
- com.red.redcode.color
/Users/USER/Library/Frameworks/EWSMac-GC.framework
- com.eSellerate.EWSMac67108872
PrefPane
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/REDcode.prefPane
- com.red.prefpanel
/Library/PreferencePanes/VersionCueCS3.prefPane
- com.adobe.versioncueCS3.VCPrefPane
/Users/USER/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
Bundles
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ASEFormat.plugin
- com.adobe.aseformat
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/BMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Cineon.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/EPS Parser.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/GIF.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/JPEG2000.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/OpenEXR.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PBM.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PCX.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PNG.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Pixar.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Radiance.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Targa.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/WBMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/altiveccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/dicom.plugin
- com.adobe.dicom
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/mmxcore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/multiprocessor support.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ppccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Required/Photoshop Adapter.plugin
- null
/Library/Application Support/Adobe/Flash Player/Flash Player.plugin
- com.macromedia.Flash Player.plugin
/Library/Application Support/Adobe/Plug-Ins/CS3/File Formats/Camera Raw.plugin
- com.adobe.CameraRaw
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/Versions/2.0/Resources/PlugIns/CFXmlParser.plugin
- com.hp.dmf.plugins.CFXmlParser
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/ -
Need help with Berkeley XML DB Performance
We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
XmlIndexSpecification spec = container.getIndexSpecification();
// ids
spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// index to cover AttributeValue/Description
spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
// cover AttributeValue/@value
spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// item attribute values
spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// default index
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// save the spec to the container
XmlUpdateContext uc = xmlManager.createUpdateContext();
container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig
Maybe you are looking for
-
hi all, i was creating a jar excutable, when i was trying to execute it by double clicking on it(its placed in the desktop), open with dialog box is coming. could u plz help me out?? here what i've done.. in the manifest file i've entered Manifest-Ve
-
IWork Page Hyperlink Not Working In Email & PDF
I use Pages as a template for my standard email reply with many hyperlink contents. I found hyperlink link is missing when i copy the content from Pages to my gmail when i was working on replying an email. How can i keep the hyperlink active during t
-
Hi all, I need the clarifiaction for a scenario while creating condition record. In A911 table for a Material X and Plant 1004 there exist a condition record with Valid From 01/01/2008 and VAlid to 12/31/9999 . the entry in A911 is as below. Material
-
Can I hide the cursor when screen sharing?
I'd like to hide the cursor on the screen share device. Is that possible?
-
Why do emails forwarded or replied to gain extra blank lines
When replying to, or forward emails that contain original email(s), the original emails frequently gain extra blank lines (Spaces). These extra blank lines grow in number each time the message is include in another email until it becomes so big that