Need Help With Contact Info Before Sync

I just got my first iPhone, I had a treo 700wx before this, and use Outlook 2003 for my contacts. I want to download them to my iPhone but would like to know if I need to make changes to my contact names before I do.
In Outlook and my 700wx the names are list last name first with a comma in between i.e., Doe, John.
When I sync my contacts will the first name end up where it should and the last name where it should, or do I need to change them in Outlook before syncing.
Thanks for any help,

You can set Contacts to display and sort them as you prefer:
Settings > Mail, Contacts, Calendars > (scroll down to Contacts) Sort Order > Last, First or First, Last and Display Order > Last, First or First, Last

Similar Messages

I need help with contacts.

Ok, I just recently got the Iphone 4s. I need some help with contacts. I ended up adding my hotmail contacts to my phone and now every time I add a new contact, it adds the person to my hotmail contacts instead of my All On My Iphone contacts. I don't like it because I am adding phone numbers, not necessarily with email addresses.
If you sent me a message right now and I went in and added you as a contact, it adds you to my hotmail contacts instead of my iphone ones for some reason. How can I fix this? And if I delete my hotmail account temporarily (and re-add it) will I lose the contacts that my phone put in there mistakenly?

Well, I don't care if it makes a back-up of my contacts in my hotmail. But, I would like my contacts to go to my actual phone contacts. I call and text much more than I email and it would be nice to have to not wade through my email contacts to find someone I am looking to text, etc.
I know it's not a huge hassle, but I prefer to keep the people I contact most within my text/phone contacts, rather than email.
Also, if I opt to change my email service (hotmail gets a lot of spam), I don't want to lose phone/text contacts because I no longer use that email anymore.
I wouldn't even care if they appeared in both, for my most contacted. I just would like to have them in my phone book without having to add them all by hand.

Need help with "get info" dialog box

Hi Everyone!
I need some help with trying to figure out what some of the options are in the "Get Info" dialog box. I've searched the iTunes help and these forums, but can't find anything.
So, in the options tab,
1. What does "Part of compilation" Y/N, do for me?
2. Same for "Remember Position"
3. And finally, "Gapless album"
Thanks, Vince.

1. when you import a compilation album (like an 80's compilation or something), itunes will import it as
song 1, artist 1, 80's greatest hits
song 2, artist 2, 80's greatest hits etc
Click part of a compliation means that, it means that it would keep them altogether rather than having lots of songs everywhere
2. If you start playing a song, then stop, part way through, when you next come to the song, itunes will remember where you left off
3. Albums like jean michel jarre, classical, mike oldfield, etc, have many songs which merge into each other. Having gapless album ticked will ensure that, when playing the album, there are no gaps between songs

Need help with CONTACT sync example

I have been trying to work with the Sync example that utilizes the MEREP_CONTACT_* BAPI wrappers. Is there anyone who has been able to get this example to work that could give more information on it? I can create the programs, but cannot get data to it. Which SyncType is it supposed to use? What directory do you create the data from MEREP_SAP_EXM002_DATA_GEN1?
Any information would be greatly appreciated.
Thanks
Brian Timothy
[email protected]

hello brian,
i created the contactaddress test application and used these BAPIs on the backend mapped to syncBos SAP_EXM001 and SAP_EXM002. the basic requirement for this is to deploy your application together with the xml metadata.
after your application is installed in the ME, the framework will automatically send a data download request for syncBos SAP_EXM001 and SAP_EXM002 on the next synchronization. Prior to this, the application tables in the backend like the MEREP_PERSON which is mapped to the syncbo SAP_EXM002 should be filled with data.
use MEREP_SAP_EXM002_DATA_GEN2 and MEREP_SAP_EXM001_DATA_GEN1 to fill-up the tables with data.
you should have at least a data viewer for the corresponding syncbo data on your application.
hope this helps.
regards
jo

Need help with contact syncing using iCloud. How do I do it?

I deleted LOTS of contacts on my iphone which syncs with icloud but now I want to sync my ipad using the icloud and do not want to have my ipad to override the corrected contact list. How do I do that?
Thanks. Pat

I did a back up as I too am paranoid. I am wondering if there is a way to wipe my contacts from my iPad and then do the merge?
When I was deleting all the contacts from my iPhone I thought it was best to turn off icloud on my iPad. In hindsight I think that was incorrect.
Thanks both of you for responding thus far.

Need help with contact syncing

Alright, here's my problem. I recently sold my old phone to a friend, and somehow he synced his contacts to my iCloud account. I still have my old contacts in a local backup that I can restore from, but as soon as I turn iCloud back on, it automatically resyncs *FROM* iCloud and I get his contacts again. So my question is, how can I sync my contacts *TO* iCloud from my restored phone without downloading his first?

I tried that. Logged into http://www.icloud.com, deleted all of the contacts, restored my phone so I had all of my old contacts. Right when the restore finished, I went into Settings -> iCloud and it promped me for my password. As soon as I typed in my password, it deleted all of my contacts from my phone (presumably because it synced from an empty iCloud account).
I'm stuck

NEED HELP with contact/data recovery from restore backup before current

My girlfriend synched her iphone 5 to itunes 6 months after purchasing it and wiped all of her data. Instead of clicking "restore backup", she chose "Backup now", which replaced the version we needed. Is there anyway of retrieving the data from that restore?

No, not unless she had a backup of the data she loss.

Portfolio site, need help with contact form

Hi,
Im a graphic designer turned web designer student. I dont know A LOT of flash, but im learning more as time goes by in and out of school. I currently redid my portfolio website, before it was more of a design taken into dreamweaver and uploaded. Now everything is not completely done, but im doing the site in flash.
www.Nikdesigns.com, if anyones interested...
but im trying to set up a really basic contact page. I have a name/email and message input text boxes and a submit button so far. Is there anyway someone can explain to me exactly what code I need, and what I need to do to be able to set this up correctly? Or link me a good tutorial?
I understand flash needs a php to send the info out and comunicate with, but other then that im lost. What actionscript? and what keyframe?
flash is so frustrating =/ someone please help, lol.

If your contact page is just 1 of the many pages in your site, I'll recommend you write it in HTML/PHP/JSP.
There are many cases when Flash/AS is the efficient tool to get jobs done. But just my humble opinion, I think in this case you'll be more efficient to construct the contacts page with mark-up languages.
Of course, it is possible to do it in Flash/AS and not difficult. I just have 1 question before I go off and try:
When an user submits the form, how do you wish to receive it? As an email in your inbox? Store it in a database? Or elsewhere?
Cheers,

Need help with ES2 and MIDI sync!

I am in a hurry and need to do the final mix of a Logic Pro project where I am using ES2 with the patch 002 Reanimation (which is in the group 10 Gated Synth in the pull down menu of presets in ES2. - My problem: Before upgrading LogicPro to 9.1.4, the synth patch Reanimation played in sync with the tempo in my Logic project (which is 130 bpm). After the upgrade, when the ES2 patch plays out of sync (the Reanimation patch is arpeggiated, and it now plays with a different tempo than before). - I can't figure out how to solve this problem, so any help is very welcome. Which setting (button) in ES2 and/or Logic Pro Preferences menu should I change to make the ES2 play in sync with the tempo 130 bpm?
For your info: I loaded a backup version of my Logic Project from April (before I updatet Logic Pro), but the patch has the same problem. This makes me think that the problem must be in the Logic Pro Preferences. But where???

Check this thread.
https://discussions.apple.com/thread/3087548?start=0&tstart=0
pancenter-

Need help with contacts

Hi, I've had contacts on my imac for years. then, about 4 years ago, I got an iphone... I help out for a while ;-)
I back my iphone and ipad up to my imac at home. So once I got my iphone, I created a group called iphone contacts as, at the time, I did not want to have EVERY contact I have on my phone. At the time, I felt like there were ones I'd want to keep at home, wanting to just have my family and friends on my phone. So when I backed up, I had a folder I called iphone contacts and that is what backed up to my phone.
Zip forward what feels like a technological millenium, iCloud is working and I'm using my phone much more than I did in the beginning and for more things.
Now I have much of my data backed up to iCloud, such as contacts, calenders, reminders, safari and notes. I don't have mail via iCloud as I use gmail and it does it for me basically.
So today, I got an address update for one of my contacts. I went into contacts on my iphone and edited it with the new snail mail address. Upon arriving home tonight, I decided to back up my iphone and looked at my contacts first, wanting to make sure the new change was there. It is not. I'm not sure why but in looking at my iphone's contacts, I find I have groups that were created due to previous ways of sorting and tracking data and now, with the cloud, it is just a bit confusing. in my contacts on my imac, I see the following categories and groups
at the very top
ALL Contacts (in blue)
On my Mac (in gray)
     All on my mac
iCloud (in gray)
     All iCloud
     Family
     iPhone Contacts
Smart Groups (in gray(
     Last Import
And on my iphone I see three groups
All Contacts
Family
iPhone Contacts
It seems that now that I am using iCloud to hold and sync my contacts, the use of groups is truly more about a mail list.. such as family, so if I want to email all my sibs, etc. So can I just delete all the groups and just have one pool of contacts, which I assume would be ALL CONTACTS, correct?
And then, as I see the need, I can create a group and drag the various contacts to that group?
And if I change info in a contact, will it show up in any group in which that contact is a member?
thanks for any help.
M

From Contacts Help. Type in smart groups:
Use Smart Groups
A Smart Group groups contacts automatically based on criteria you specify. For example, group all the members of your swim club by creating a Smart Group for contacts that have “swim” in the notes field. Then every time you enter “swim” in a contact’s notes field, the contact is added automatically to your swim club Smart Group. Smart Groups can include contacts from any account.
Open Contacts
HideCreate a Smart Group
Choose File > New Smart Group.
Enter a name for the Smart Group.
Specify the conditions.
Use the pop-up menus and entry field to set the conditions. Click Add to specify additional conditions.
If you include a group in a condition (by choosing “Card is member of” or “Card is not member of”), you can’t delete that group until you either change the condition or delete the Smart Group that uses the condition.
Click OK.
HideEdit a Smart Group
Select the group, and then choose Edit > Edit Smart Group.
HideRename a Smart Group
Select the group, and then click the group’s name.
Enter a new name, and then press Return.

Need help with File to SOAP sync scenario: NO_BACK_SYSTEM_IN_HOPLIST

Hello,
I am setting up a new scenario where I get an XML file with PI, send that content via sync SOAP receiver call and direct the result of the web service response to SAP (just back to file as intermediate step).
So far I have the transaction working to the SOAP adapter receiver request / response. I see the correct approval response coming in my SOAP channel (RWB AE payload), but this message gets stuck there before routing back to my receiver interface and mappings.
General setup:
FILE Sender to SYNC OB SI.
OB SI Request is my source message type and Response is my final message output type.
OM Source is this Sync OB SI. Target is a SOAP Sync IB SI. Request Mapping program matches the source file message type and target SOAP layout. Response Mapping matches SOAP response and Target is my final file layout.
Routing for Sync OB SI ID uses this OM for Sync IB SI.
SYNC IB SI has Request and REsponse messages mapping the external SOAP call.
When I test the configuration I get success.
When I send messages through I get error in the adapter about this NO_BACK_SYSTEM_IN_HOPLIST (therefore the response message is not making it back into the IE so that it can be mapped again and forwarded).
Complete error message from RWB Adapter Log "Transmitting the message to endpoint http://[myhostname]:[myport]/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: NO_BACK_SYSTEM_IN_HOPLIST:." and the next line is "Received XI System Error. ErrorCode: NO_BACK_SYSTEM_IN_HOPLIST ErrorText: null ErrorStack: Legacy system to which acknowledgment message is to be sent is missing in hoplist (with wasread=false)"
Any ideas for me? (fyi not using BPM).
Regards, Aaron Myers

Hi AAron,
Looks like this problem has occured before. There are SAP Notes recommended. Below are some helpful links.
http://scn.sap.com/thread/848913
http://scn.sap.com/message/4659941#4659941
Thanks,
Divya.

Need help with contact recovery

i need some help please
i lost my bb 9900 last week and now am using a bb 8520 that has os 5.0 i believe
supposedly bb protect will not work with this phone so I cannot access my weekly backups from protect website
is there anyway i can transfer those online backups to my home mac computer so i can load to this phone without installing protect app? (it wont let me install on this phone)
if not - can someone from RIM send to me? i can see the backup files on protect website - latest from around when i lost my phone.
the reason for all this is i have many BBM contacts - and previously, i was able to restore using email when i got my 9900 and it loaded successfully - now, when i try retore by email - it states no contacts linked to my email address!
i dont have these bbm contacts on my mac since the last backup on the computer was last year - since then, i have only backed up using protect
i am having no luck at all!!!!

sunnyb82 wrote:
but i dont understand your last part:
(this doesnt show up in my options tab for contacts)
As for the continued inability to restore your contacts from BB Protect, also check this:
On the BlackBerry smartphone, navigate to Contacts > Options > Desktop Contact List. Set Wireless Synchronization to No.
Check that same setting for any Contact Lists you have displayed in the Contacts Options area.
not sure what this all means > Further, if you are going to use Google as your Contact list source, then restoring from any source is moot...if Google has the correct data, then allowing it to continue OTA synchronization would be your best approach.
My point was that the Option setting indicated may or may not exist...if it exists, then it needs to be set to NO. If it does not exist, then it is not relevant (which I think is what applies in your case). In any event, since you were able to restore, all is well as far as contacts are concerned.
sunnyb82 wrote:
so i have my old BBM pin - how can i retrieve the BBM contacts from there? its linked to my gmail address because i restored by email to my 9900 last time
You have your old BBM PIN? Hmmm...I'm not quite sure what you mean by that. Knowing the PIN is just that...knowing the unique PIN that was assigned to your old BB at time of manufacture. But, for obtaining your old BBM contacts, you'd need the actual device or a successful backup that was previously created (either the Desktop Software or via the in-BBM backup method). Knowing only the PIN itself now, I don't see how that applies. Perhaps I do not understand?
Now, if what you did was do the remote in-BBM backup using an email address, then that's a different thing indeed. But I don't exactly know how that works...it may well be that it only works for the exact same BB and not to another BB. I've always used the local file BBM contact backup as I then know for certain that I have control over the backup file.
sunnyb82 wrote:
can someone from rim help me retrieve this data since its all stored on the servers...
For free, only if you can convince your mobile service provider to escalate your case into RIM.
For a fee, you can ask via Incident Support, but it does cost to just ask the initial question, and I've no idea if there even is a way to accomplish what you are wanting to have them do (I rather doubt it, but I still do not quite understand what your request is):
http://us.blackberry.com/support/programs/technical/incident.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need Help with Contact Book to Mysql in Flash

Hi... this is a lil over my head. If you go to
www.rampagesoundstudios.com and click on the contacts tab, there is
a guestbook. I am not that experienced in flash to get this to work
with the mysql databases on the webserver.
What I need to have done is when you click the submit button,
it sends it to a text file, then I would guess to a php script and
then when I want to retrieve it, have a html file queue the
database for retrieval.
Can anyone assist me or teach me how to do this? I would be
willing to pay you via paypal if needed.
Please reply off list to ramtazz(at)comcast.net
Thanks,
Bill

Visit gotoandlearn.com. There are a few video tutorials that
take you thru the process of loading data into Flash.
The general scheme for a MySQL database is... Flash calls a
php file that collects the data and writes (echoes) it into an xml
format which Flash can read using its xml processing function(s).
Putting new data into the database follows a similar path,
where Flash sends the variables to a php file and that file places
the data into the database.

Hard problem. need help with contact file (data.syncdb)

hello everyone. i lost my iphone. i have the data.syncdb file.
how can i view this?
if i cannot view it can i send it to someone and they can replace their file on a old iphone (if someone has one) or touch? then they can see the contacts and email them to me? i would paypal you some $$ to help me out. i dont have much just need the contacts bad.
any help would be great.
Thanks!

anyone?

Need help with contacting HTTPS URL

Hi,
I am new bie to Java Security. I do not know where to start off with. Here is the requirement.
I need to contact an HTTPS URL and this URL gives me output which is encypted data.
I have to save this ecnrypted data into a file and I have the KEY to decrypt the data.
I have tried several ways (all listed below) to get it working. But I am not successful. I get
"javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found"
Can you guys give me some insight on how to proceed?
Thanks
Mathew
import java.util.*;
import java.text.*;
import java.net.*;
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.net.HttpURLConnection;
import java.net.URL;
import java.security.Permission;
import javax.net.ssl.HttpsURLConnection;
import java.security.*;
import java.security.cert.*;
import javax.net.ssl.*;
import java.io.*;
public class temp
     protected BufferedReader messageResponseReader;
     private static final String CERTIFICATE_TYPE = "SunX509";
     private static final String KEYSTORE_TYPE = "JKS";
     private static final String SSL_PROTOCOL = "TLS";
     private static final String CERTIFICATE_FACTORY_TYPE = "X.509";
     public static void main(String args[])
          try
               try{
                         temp tmp = new temp();
                         String url = "https://test.mysite.com/one/perform.jsp?mode=get&check=true";
                         tmp.sendRequest(url);
                    }catch(Exception e)
                         e.printStackTrace();
          catch(Exception e){
               e.printStackTrace();
public String sendRequest(String urlString) throws Exception
StringBuffer response = null;
BufferedReader messageReader = null;
try
               String username = "user";
               String password = "pwd";
               String encoding = new sun.misc.BASE64Encoder().encode("username:password".getBytes());
               //java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
               //System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
               // Needed for validation of the server certificate
               //System.setProperty("javax.net.ssl.trustStore","C:\\cert\\key.txt");
               // Needed for providing a clint certificate for client authentication
               //System.setProperty("javax.net.ssl.keyStore","C:\\cert\\key.txt");
               //System.setProperty("javax.net.ssl.keyStorePassword","te5t1ng");
               //System.setProperty("ssl.SocketFactory.provider", "com.sun.net.ssl.internal.ssl.Provider");
               KeyStore ks;
               ks = KeyStore.getInstance("JKS");
               CertificateFactory cf = CertificateFactory.getInstance(CERTIFICATE_FACTORY_TYPE);
               TrustManagerFactory tmf = TrustManagerFactory.getInstance(CERTIFICATE_TYPE);
               KeyManagerFactory kmf = KeyManagerFactory.getInstance(CERTIFICATE_TYPE);
               FileInputStream fis = new FileInputStream("C:\\cert\\key.txt");
               BufferedInputStream bis = new BufferedInputStream(fis);
               Collection c = cf.generateCertificates(fis);
               Iterator i = c.iterator();
               while (i.hasNext()) {
               java.security.cert.Certificate cert = (java.security.cert.Certificate)i.next();
               System.out.println(cert);
               ks.load(null, null);
               X509Certificate the_cert = (X509Certificate)cf.generateCertificate(bis);
               ks.setCertificateEntry("server_cert",the_cert);
               tmf.init(ks);
               ks = KeyStore.getInstance(KEYSTORE_TYPE);
               ks.load(null, null);
               the_cert = (X509Certificate)cf.generateCertificate(new FileInputStream("key.txt"));
               ks.setCertificateEntry("client_cert",the_cert);
               kmf.init(ks, null);
               SSLContext ctx = SSLContext.getInstance(SSL_PROTOCOL);
               KeyManager[] km = kmf.getKeyManagers();
               TrustManager[] tm = tmf.getTrustManagers();
               ctx.init (km, tm, null);
               HttpsURLConnection.setDefaultSSLSocketFactory(ctx.getSocketFactory());
urlString = urlString.replaceAll(" ","%20");
URL url = new URL(urlString);
//HttpsURLConnection urlCon = (HttpsURLConnection)url.openConnection();
HttpURLConnection urlCon = (HttpURLConnection)url.openConnection();
//com.sun.net.ssl.HttpsURLConnection urlCon = (com.sun.net.ssl.HttpsURLConnection)urlCon;
/*urlCon.setRequestProperty("Host", url.getHost());*/
urlCon.setDoOutput(true);
urlCon.setDoInput(true);
urlCon.setRequestMethod("POST");
urlCon.setUseCaches (false);
urlCon.setAllowUserInteraction(true);
urlCon.setInstanceFollowRedirects(true);
urlCon.setRequestProperty ("Authorization", "Basic " + encoding);
//Permission permision = urlCon.getPermission();
//System.out.println("permission name:"+permision.getName());
urlCon.connect();
//messageReader = new BufferedReader(new InputStreamReader(urlCon.getInputStream()));
//response = new StringBuffer();
//String line;
//while((line = messageReader.readLine()) != null){
// response.append(line);
// response.append("\n");
catch (Exception e) {
e.printStackTrace();
throw e;
return "testing";

sorry for the junk data.. Need to post it again

Need Help With Contact Info Before Sync

Similar Messages

Maybe you are looking for