Need help with correct email settings for several devices and Gmail

My work email is set up on my 2 macs in mac mail with the IMAP setting. I also have my email routed to gmail. How can I set up my email so  they download to all 3 locations without them disappearing or rerouting after I read them? Currently, if I open an email on one device, it typically disappears and the eventual locaiton tends to be gmail where they stay forever. This morning, one of my devices got an email I was waiting for, and the other did not.

My work email is set up on my 2 macs in mac mail with the IMAP setting. I also have my email routed to gmail. How can I set up my email so  they download to all 3 locations without them disappearing or rerouting after I read them? Currently, if I open an email on one device, it typically disappears and the eventual locaiton tends to be gmail where they stay forever. This morning, one of my devices got an email I was waiting for, and the other did not.

Similar Messages

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • Need help with best render settings for project

    Hi everyone,
    I am completely new to after effects and premiere.
    1. I am working on a premiere project with 1440 x 1080 mpeg2 footage from a Sony hdr-fx1000, in my premiere project my sequence settings are HDV 1080i30 (60i).
    2. I export a clip with under these same settings. 
    3. I open a new composition in after effects with the following settings: preset: HDV 1080 29.97 (same as footage)
    4. I time stretch using pixel motion
    5. What are the best render settings and output module settings to use if I want to import the modified clip back into my premiere project?
    PS I've been trying to output to mpeg2 but when i check the properties on the clip it says .mv2 and it looks choppy.
    Thanks in advance!

    BTW, if you're new to After Effects, I very strongly recommend that you work your way through the getting-started materials here:
    http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

  • Help with correct sequence settings for exporting QT

    hi -- I am about to export a QT movie of a sequence in FCP. There are three different properties of clips in the sequence -- footage I shot on a Panasonic HD HMC150 was compressed with Apple ProRes422 and footage I shot on the JVCHD - can't remember model - uses the 720p24 codec. All other properties for these clips are the same.
    I also use some archival footage in the sequence was shot at 29.97 fps, 720x480, compressed using the DV/DVCPro NTSC and a different pixel aspect.
    I also use jpegs.
    Here's the question. The Sequence Settings are HDV 720p24. Do I need to change the properties for the clips that don't match the Sequence Settings BEFORE I export a QT File? Or, do I export a QT file then import it back into FCP at the 720p24 setting and export that sequence as a QT file.
    Thanks

    ok here's the info everyone has been asking for -- and, please remember, I have solved the exporting QT to make a DVD now . . . .
    The pressing issue is that, somewhere in the process -- the images that fit within the 16:9 got bigger so that less of the image is in the frame.
    Sequence Settings:
    ok here's the info everyone has been asking for -- and, please remember, I have solved the exporting QT to make a DVD now . . . .
    The pressing issue is that, somewhere in the process -- the images that fit within the 16:9 got bigger so that less of the image is in the frame.
    I made stills from the same frames in the different sequences to show the difference between them. Unfortunately, I can't attach these images in the forum.
    So here's the sequence settings as of now for both the original and current sequences:
    Easy Setup:
    Format - HD
    Codec - HDV 720p24
    23.98 fps
    1280x720
    Sequence Settings:
    1280x720
    Aspect Ratio - hdtv 720p 16:9
    pixel: square
    compressor appleprores 422
    Field Dominance - none
    editing timebase: 23.98
    Render Codec - same as sequence codec
    Clip Codecs:
    Primarily HDV 720p24
    Some Apple ProRes 422
    Archival Footage - Dv/DVCPRO NTSC
    Okay, now here's where things start getting hairy. I read in the FCP manual today that I should convert the sequence setting to the same codec as the majority of the clips -- in this case that was 720p24. So I changed the sequence codec from AppleProRes 422 to 720p24. Then I rendered the sequence before exporting it as a QT file. -- not noticing until after I burned a DVD about the image size problem.
    Now, this evening, while I was checking the settings of the older original sequences -- trying to figure out what went wrong -- I realized that the original sequence used the AppleProRes 422 codec!! So, I converted my current sequence from the 720p24 codec BACK to Apple ProRes 422 - hoping this might solve my larger image problem -- BUT the image size stayed the same. Am I just compressing over and over again and screwing up my sequences.
    The weird thing is that MOST of the sequence copies that are not the original -- converted to the changed codec even though I had only the sequence I was changing open ---- there must be a reason for all this. I hope you all can figure it out for me. I've been spending hours at it.
    Thanks again.

  • HT3228 What's the correct email settings for the fastest email receiving on my iPhone 4s

    What's the correct email settings for the fastest email receiving on my iPhone 4s

    As no one here knows who your email provider is, no, no one can help. Have you tried looking at your email provider's help pages? Done an internet search?

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • I need help with downgradeing my ios for my ipod touch 4th gen

    i need help with downgradeing my ios for my ipod touch 4th gen

    As has alwys been the case, you cannot go back.
    Sorry

  • Email settings for apple mail, Hotmail, Gmail

    Need Mail setting for MacPro for hotmail & gmail...please

    Hello Peggy,
    It sounds like you need to know the proper settings to use Hotmail and Gmail with the Mac Mail application on your Mac. This website should help you find them, and show you the settings you need for those services:
    Mail Settings Lookup
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

    Need help with Itunes transferrs and can I use my Edge phone as a router?

    I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
    Is this an iPhone?
    Set it up using the AppleID you used on the previous iPhone.

  • **New** Need help with your email?

    If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
    Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
    Each step includes a helpful picture to keep you right.
    We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    - Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
    Note:
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • [solved]Need help with a bash script for MOC conky artwork.

    I need some help with a bash script for displaying artwork from MOC.
    Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
    mocp -Q %file
    gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last  '/'?)
    A point in the right direction would be appreciated.
    thanks, d
    Last edited by dgz (2013-08-29 21:24:28)

    Xyne wrote:
    You should also quote the variables and output in double quotes to make the code robust, e.g.
    filename="$(mocp -Q %file)"
    dirname="${filename%/*}"
    cp "$dirname"/front.jpg ~/backup/art.jpg
    Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
    thanks for the tip.
    here it is, anyhow:
    #!/bin/bash
    filename=$(mocp -Q %file)
    dirname=${filename%/*}
    cp ${dirname}/front.jpg ~/backup/art.jpg
    then in conky:
    $alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
    thanks for the help.
    Last edited by dgz (2013-08-29 21:26:32)

  • I need help with Compressor 4 settings to convert .mp4 files to .m4v for iBooks Author

    I'm a curriculum design guy with no video background. I have Compressor 4, but don't really know much about how to best use it.  I'd appreciate some help with getting the right setting for my project. Screen shots of settings would be much appreciated, since I don't know much video terminology.
    I'm making an free iBook for students on WWII propaganda using old videos from the Internet archive.
    I'd plan to use Compressor to:
    1. Convert the .mp4 files to a .m4v that iBooks Author will accept. (I know I can use QT for that, but it increases file size)
    2. Use Compressor to reduce file size so my iBook doesn't get too big
    3. Get videos that look & sound the best, given the poor quality of the original source videos.
    Here's some sample videos that I'll use:
    http://www.archive.org/download/OutOfTheFryingPanIntoTheFiringLine/OutOfTheFryin gPanIntoTheFiringLine.mp
    http://archive.org/download/AvengeDe1942/AvengeDe1942_edit.mp4
    PS - I will also be editing some of the original videos in iMovie - if I use different settings to prep those videos for iBook Author, let me know.
    Much thanks in advance for any help

    Compressor is half the size compared to QtX encoding, 17 MBs...
    File Format... H.264 for Apple Devices...
    Device: iPhone Local/WiFi
    Aspect Ratio: 4:3 480x368
    Data Rate: 700
    Uncheck Multi-pass

  • Need help with correction inscript for duplication on regular basis

    Hi,
    I am using Oracle 10.2.0.4 on Win 2008 R2. We have Archive mode enabled and no rman catalog is used. I have a requirement where i have to duplicate prod sevrer on regular basis to development server.
    I have created few batch files so that the entire process in automated. Stored all the scripts in c:\script\clone\ directory.+
    I have taken the backup copy of password and spfile from prod server and copied to the development server in same location.
    These are the scripts i run in order:
    *1_clone.bat*
    set ORACLE_SID=orcl
    sqlplus / as sysdba @c:\script\clone\2_test.bat
    *2_test.bat*
    shutdown immediate
    startup nomount
    host rman target sys/oracle@live nocatalog auxiliary / @c:\script\clone\3_rman.rcv
    *3_rman.rcv*
    run {
    allocate auxiliary channel d1 type disk;
    duplicate target database to ORCL NOFILENAMECHECK;
    exit
    When the duplication process in about to finish, i get below error:
    contents of memory script:
    shutdown clone;
    startup clone nomount;
    executing Memory Script
    RMAN-03002: failure of duplicate DB command at 07/31/2012 08:02:21
    RMAN-03015: error occured in stored script memory script
    RMAN-06136: Oracle error from auxiliary database: ORA-01013: user requested cancel of current operation
    Recovery Manager complete
    SQL>
    When i press exit, this window closes and i can run the alter database open resetlogs;+ command from a new sql prompt. I check online and some suggest there might be a window open with system user connected. Please suggest any changes in the script.
    Best Regards,

    Hello;
    Having another session with system user will cause rman to throw this error. For example another session used to start up database in nomount mode still being active.
    Duriing the cloning process the rman session needs to be exclusively connected to the auxiliary instance (no other session are allowed).
    Duplicate post
    request for help with rman cloning script
    Best Regards
    mseberg
    Edited by: mseberg on Jul 31, 2012 5:02 AM

  • I need help with proper DNS setup for 10.5.8 Server

    I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
    I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
    The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
    nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
    The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
    In DNS, I have three "sections" that look like this:
    Name Type Value
    1.168.192.in-addr.arpa. Reverse Zone -
    192.168.1.250 Reverse Mapping example.com.
    000.000.00.in-addr.arpa. Reverse Zone -
    000.000.000.000 Reverse Mapping example.com.
    com. Primary Zone -
    mail.example.com. Alias mail.our-email-isp.com.
    example.com. Machine Multiple values
    www.example.com. Machine Multiple values
    NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
    When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
    When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
    When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
    When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
    When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
    When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
    Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
    I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
    Any help you have to offer is greatly appreciated! Thanks!
    In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.

    Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
    http://www.makemacwork.com/configure-internal-dns-1.htm
    Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what?

  • I need help with an email WiFi sending problem on my iPad 2

    I’m having an email WiFi sending problem on my iPad 2     Model:  MC774C/A;  IOS VERSION: 6.1.3 (10B329). 
    While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca.  The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
    I first noticed the problem about 3 weeks ago while travelling across the country (Canada).  (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.)  Prior to that everything worked well for a couple of years.
    I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi.  During the day, using my 3G account, all worked fine.  I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house.  I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at.  I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
    However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
    I’m looking for any suggestions that might solve this annoying problem?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for