Need help with correct setup for SuiteLink - Get ACE error message 7078
When I enable SuiteLink via:
ace_set_mode( g_ah, ACE_MODE_ENABLE_SUITELINK, TRUE );
ace_set_file( g_ah, ACE_DIR_SUITELINK, "D:
PW
201108
SuiteLink" );
ace_set_file( g_ah, ACE_DIR_NAME_PARSING_FILES, (char*)"D:
PW
201108
ncoalink");
Right after
ace_open( g_ah );
I get the following ACE error: 7078
where the description is: an incompatible version of the name parsing library required to run was found.
1) I'm not entirely sure where ACE_DIR_NAME_PARSING_FILES should be pointing to. We don't use NCOA but the documention says both SuiteLink and NCOALink use the same parsing files.
Inside NCOALink\ there is parsing.dct with a datestamp of 1/13/2009 which seems old.
I am running ACE800cRev5, just downloaded the July 2011 directories. ace32.dll version 8.4.5.0
Thanks!
Michael,
A regular ACE job with Suitlink enabled would also use the same parsing files located in ncoalink\. The parsing.dct included with my ACE 8.00c.05 is also dated 1/13/2009.
I have little expertise with ACE RAPID, but I would guess that ACE_DIR_NAME_PARSING_FILES should also be set ncoalink\
Regards,
Brandon
Similar Messages
-
I've been trying to upgrade to/install Itunes 10. When trying to do so, I get the error message: Install failed run preupgrade for Apple Mobile Device Support.
Per what I saw as a response to someone else who had a similar issue, I thought a fix might be to uninstall my existing Itunes, then try to re-install the Itunes 10. I tried that. However, I still get the same error message. Now, I have no Itunes.
I tried to email Apple, and they have not replied.
Anyone offer any solutions?me too did you get any help?
-
I am running windows XP and have successefully loaded Forefox. My Firefox will not launch and I do not get an error message. When I click on the firefox icon I see an hourglass for two to three seconds and it still does not launch. Please help!
== Each time I try to launch Firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Do you have NoScript or Flashblock or some similar Extension installed? If so, are you allowing the site, at least on a temporary basis, access by such an Extension?
Your Shockwave for Director is out of date. You can check here: http://www.mozilla.com/en-US/plugincheck/
To update it, use the link on the page below under "Installing Shockwave", download and save to your hard drive, close Firefox, click the file you downloaded, after the install, open Firefox and check on the above link again.
https://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox -
Need help with correction inscript for duplication on regular basis
Hi,
I am using Oracle 10.2.0.4 on Win 2008 R2. We have Archive mode enabled and no rman catalog is used. I have a requirement where i have to duplicate prod sevrer on regular basis to development server.
I have created few batch files so that the entire process in automated. Stored all the scripts in c:\script\clone\ directory.+
I have taken the backup copy of password and spfile from prod server and copied to the development server in same location.
These are the scripts i run in order:
*1_clone.bat*
set ORACLE_SID=orcl
sqlplus / as sysdba @c:\script\clone\2_test.bat
*2_test.bat*
shutdown immediate
startup nomount
host rman target sys/oracle@live nocatalog auxiliary / @c:\script\clone\3_rman.rcv
*3_rman.rcv*
run {
allocate auxiliary channel d1 type disk;
duplicate target database to ORCL NOFILENAMECHECK;
exit
When the duplication process in about to finish, i get below error:
contents of memory script:
shutdown clone;
startup clone nomount;
executing Memory Script
RMAN-03002: failure of duplicate DB command at 07/31/2012 08:02:21
RMAN-03015: error occured in stored script memory script
RMAN-06136: Oracle error from auxiliary database: ORA-01013: user requested cancel of current operation
Recovery Manager complete
SQL>
When i press exit, this window closes and i can run the alter database open resetlogs;+ command from a new sql prompt. I check online and some suggest there might be a window open with system user connected. Please suggest any changes in the script.
Best Regards,Hello;
Having another session with system user will cause rman to throw this error. For example another session used to start up database in nomount mode still being active.
Duriing the cloning process the rman session needs to be exclusively connected to the auxiliary instance (no other session are allowed).
Duplicate post
request for help with rman cloning script
Best Regards
mseberg
Edited by: mseberg on Jul 31, 2012 5:02 AM -
ADO Database Connection: Need help with correct syntax for 'Execute' Method
My server Windows 2008R2 taking more than 30 hours to complete backup
so next backup getting fail
is there any option to set start backup after 24 hours if previous backup completeI have a script that I am trying to cobble together, but I am stuck at attempting to execute an SQL query against and ADO connection. My code is as follows:Powershell $FQDNUpper = $Computer.ToUpper() + ".domain.dn1.dn2" $FQDNLower = $Computer.ToLower() + ".domain.dn1.dn2" $shell = New-Object -ComObject "Wscript.Shell" # for use later in script $cnn = New-Object -ComObject "ADODB.Connection" $cnn.ConnectionString = "Connection_String" $cnn.Open() $query = "SELECT CAST(ID AS nvarchar(50)) ID FROM Machine WHERE Name=$FQDNUpper AND Role = 0" $rs = $cnn.Execute($query,' ',1) #If statement that will qualify if $FQDNUpper returned anything else try $FQDNLowerWhen executing the code I receive an error:
PowershellArgument: '2' should be a System.Management.Automation.PSReference. Use [ref].At line:9 char:5+ $rs = $cnn.Execute($query,' ',1)+ ... -
I need help with iTunes sign in, I get an error!
When ever I try to sign in to my iTunes account, I just get "We could not complete your iTunes Store request. An unknown error occurred (-9808) There was an error in the iTunes Store. Please try again later"
I have been "trying again later" for months! What can I do to FIX THIS?Check your internet settings.
Control Panel – Internet Options – Advanced
Uncheck “Check for server certificate revocation (requires restart)”
Click okay -
I still need help with the Dictionary for my Nokia...
I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW. -
My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?
Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again -
I need to update my apps but I get an error message that I am pointed to us store vs Canadian store. Where do I change app stores?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located; re-select country/region even if it is correct
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again. -
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
Need help with Printer Setup conventions
I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it. -
Not exactly iweb - need help with a graphic for my site
This doesn't fit anywhere so dumping it here. I drew by hand a graphic I want to use with iweb to put on my site as my site's logo. Main problem is that getting the background transparent isn't working well as when it was scanned the scanner didn't back the background "pure" white. I have tried adjusting the whitepoint and setting the color depth down, but still no good. I don't know a ton about graphic program use. I have an older copy of graphic converter that came on this powerbook when i got it. I would be fine having the graphic loose the marker look and have solid fill colors - just I am not good enough with computer drawing tools to do it on the computer! So I either need to get a volunteer to help me out, or some help with some detailed instructions to get this to work out... (also I am broke so no cost/shareware is only option here)
many thanks!!!!
I can get you a scanned jpg of the pic if needed.THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png -
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name. -
I am an avid Elder Scrolls fan and am using the new STEP 2.2.9 setup. They've gone to Mod Organizer (MO) and I cannot seem to get my FF working with the download mod portion of things. I click the "earth" icon, which takes me immediately to the Nexus Mod files page but when I choose a file to download after clicking "Download with Manager" I get this error message:
The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (nxm) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address.
The address given, when clicking "Download with Manager" begins with nxm://Skyrim/mods/ The address is such due to trying to download with the manager.
Any help will be greatly appreciated! I've pulled my hair out for the last few hours trying to find a fix. I've disabled Adblock, all other popup blockers and enabled the main address in my exception rules. It's just not working. Ugh!
Thank you in advance!In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat -
I am trying to display a .pdf file within Firefox on a Vista PC. I have changed the extension from .pdf to .dnax to differentiate this .pdf file from others. I get an error message as above.
The file is displayed using Firefox on another PC with a Linux OS without problem.
Any advice out there?Firefox typically judges the nature of a document or download based on the content-type header send by the web server. Usually a server has a catalog associating file extensions with content types. When you choose a new file extension, the server may send the generic "it's some kind of binary file" header ("application/octet-stream") which Firefox will not associate with a particular program.
Now, when you open a file from the local system, there is no web server, so Firefox may look to the file extension to ascertain the content type. Obviously that is not working in your case. What happens when you want to open the file from My Computer or Windows Explorer? Does Windows have an application assigned to it? If you can associate it with Adobe Reader in Windows, Firefox may be able to pick that up from the Windows registry.
Maybe you are looking for
-
How to I get an FLV Skin to display on external sites?
This is thee most frustrating thing! I've been trying to get my FLV skin to display on other sites when embedded, but the video is the only thing that shows up. There are no play back controls; nothing! I can view things just fine on my site (so that
-
App-V 5 SP2 and publishing Office 2013 to users on RDS
Hello I have a problem with App-V 5 on RDS Servers. My scenario is like this, I have Office 2013 published Globally to over 20 RDS servers and I'm using App-Locker and groups to control access to the Office 2013 package. Now when I add a new user to
-
Main parental control and Entourage
I set up my child's e-mail with parental controls in Mail. As expected, the messages from "unauthorized" senders are forwarded to my e-mail address. But I use Entourage and I can't figure out how to authorize the appropriate messages. Do I have to sw
-
i have a HP laptop and trying to replace a faulty power adapter. i input the part number in the system and it tells me there is no such thing...... which is really sad since its a hp part number i found the second part number but yet again i can not
-
Step Input Recording via an external keyboard?
Hi there. I'm having difficulty with inputting data from my midi keyboard to logic express. when i play the notes from my external MIDI keyboard notes register on the transport bar and I can hear the notes, however they will not appear in the piano r