Need help with correction inscript for duplication on regular basis

Hi,
I am using Oracle 10.2.0.4 on Win 2008 R2. We have Archive mode enabled and no rman catalog is used. I have a requirement where i have to duplicate prod sevrer on regular basis to development server.
I have created few batch files so that the entire process in automated. Stored all the scripts in c:\script\clone\ directory.+
I have taken the backup copy of password and spfile from prod server and copied to the development server in same location.
These are the scripts i run in order:
*1_clone.bat*
set ORACLE_SID=orcl
sqlplus / as sysdba @c:\script\clone\2_test.bat
*2_test.bat*
shutdown immediate
startup nomount
host rman target sys/oracle@live nocatalog auxiliary / @c:\script\clone\3_rman.rcv
*3_rman.rcv*
run {
allocate auxiliary channel d1 type disk;
duplicate target database to ORCL NOFILENAMECHECK;
exit
When the duplication process in about to finish, i get below error:
contents of memory script:
shutdown clone;
startup clone nomount;
executing Memory Script
RMAN-03002: failure of duplicate DB command at 07/31/2012 08:02:21
RMAN-03015: error occured in stored script memory script
RMAN-06136: Oracle error from auxiliary database: ORA-01013: user requested cancel of current operation
Recovery Manager complete
SQL>
When i press exit, this window closes and i can run the alter database open resetlogs;+ command from a new sql prompt. I check online and some suggest there might be a window open with system user connected. Please suggest any changes in the script.
Best Regards,

Hello;
Having another session with system user will cause rman to throw this error. For example another session used to start up database in nomount mode still being active.
Duriing the cloning process the rman session needs to be exclusively connected to the auxiliary instance (no other session are allowed).
Duplicate post
request for help with rman cloning script
Best Regards
mseberg
Edited by: mseberg on Jul 31, 2012 5:02 AM

Similar Messages

Need help with correct setup for SuiteLink - Get ACE error message 7078

When I enable SuiteLink via:
ace_set_mode( g_ah, ACE_MODE_ENABLE_SUITELINK, TRUE );
ace_set_file( g_ah, ACE_DIR_SUITELINK, "D:
PW
201108
SuiteLink" );
ace_set_file( g_ah, ACE_DIR_NAME_PARSING_FILES, (char*)"D:
PW
201108
ncoalink");
Right after
ace_open( g_ah );
I get the following ACE error: 7078
where the description is: an incompatible version of the name parsing library required to run was found.
1) I'm not entirely sure where ACE_DIR_NAME_PARSING_FILES should be pointing to. We don't use NCOA but the documention says both SuiteLink and NCOALink use the same parsing files.
Inside NCOALink\ there is parsing.dct with a datestamp of 1/13/2009 which seems old.
I am running ACE800cRev5, just downloaded the July 2011 directories. ace32.dll version 8.4.5.0
Thanks!

Michael,
A regular ACE job with Suitlink enabled would also use the same parsing files located in ncoalink\. The parsing.dct included with my ACE 8.00c.05 is also dated 1/13/2009.
I have little expertise with ACE RAPID, but I would guess that ACE_DIR_NAME_PARSING_FILES should also be set ncoalink\
Regards,
Brandon

ADO Database Connection: Need help with correct syntax for 'Execute' Method

My server Windows 2008R2 taking more than 30 hours to complete backup
so next backup getting fail
is there any option to set start backup after 24 hours if previous backup complete

I have a script that I am trying to cobble together, but I am stuck at attempting to execute an SQL query against and ADO connection. My code is as follows:Powershell $FQDNUpper = $Computer.ToUpper() + ".domain.dn1.dn2" $FQDNLower = $Computer.ToLower() + ".domain.dn1.dn2" $shell = New-Object -ComObject "Wscript.Shell" # for use later in script $cnn = New-Object -ComObject "ADODB.Connection" $cnn.ConnectionString = "Connection_String" $cnn.Open() $query = "SELECT CAST(ID AS nvarchar(50)) ID FROM Machine WHERE Name=$FQDNUpper AND Role = 0" $rs = $cnn.Execute($query,' ',1) #If statement that will qualify if $FQDNUpper returned anything else try $FQDNLowerWhen executing the code I receive an error:
PowershellArgument: '2' should be a System.Management.Automation.PSReference. Use [ref].At line:9 char:5+ $rs = $cnn.Execute($query,' ',1)+ ...

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

Need help with calculator project for an assignment...

Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
     private static String nameSurname = "";
     private static String num1 = null;
     private static String num2 = null;
     private static String choice1 = null;
     private static double answer = 0;
     private static String more;
     public double Add() {
          answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
          return answer;
     public double Subtract() {
          answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
          return answer;
     public double Multiply() {
          answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
          return answer;
     public double Divide() {
          answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
          return answer;
     public double Modulus() {
          answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
          return answer;
     public double maximumValue() {
          answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double minimumValue() {
          answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double absoluteNumber1() {
          answer = (Math.abs(Double.parseDouble(num1)));
          return answer;
     public double absoluteNumber2() {
          answer = (Math.abs(Double.parseDouble(num2)));
          return answer;
     public double Squareroot1() {
          answer = (Math.sqrt(Double.parseDouble(num1)));
          return answer;
     public double Squareroot2() {
          answer = (Math.sqrt(Double.parseDouble(num2)));
          return answer;
     public static String octalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
     public static String octalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String octal2 = Integer.toOctalString(iNum2);
          return octal2;
     public static String hexadecimalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
          String hex1 = Integer.toHexString(iNum1);
          return hex1;
     public static String hexadecimalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String hex2 = Integer.toHexString(iNum2);
          return hex2;
     public double Round1() {
          answer = Math.round(Double.parseDouble(num1));
          return answer;
     public double Round2() {
          answer = Math.round(Double.parseDouble(num2));
          return answer;
          SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
     Date now = new Date();
     SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
     static Date timeIn = new Date();
     public static long programRuntime() {
          Date timeInD = timeIn;
          long timeOutD = System.currentTimeMillis();
          long msec = timeOutD - timeInD.getTime();
          float timeHours = msec / 1000;
               return (long) timeHours;
     DecimalFormat decimals = new DecimalFormat("#0.00");
     public String insertNameAndSurname() throws IOException{
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    while (nameSurname == null || nameSurname.length() == 0) {
                         for (int i = 0; i < nameSurname.length(); i++) {
                         if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
                                   inputCorrect = true;
                    else{
                    inputCorrect = false;
                    break;
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your name and surname: ");
                         nameSurname = inStream.readLine();
                         inputCorrect = true;
                    }catch (IOException ex) {
                         System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
                         inputCorrect = false;
                    System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
                    System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
                    return nameSurname;
          public String inputNumber1() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
                         num1 = br.readLine();
                         double number1 = Double.parseDouble(num1);
                         System.out.println("\nThe number you have entered is: " + number1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
                         inputCorrect = false;
                    return num1;
     public String calculatorChoice() throws IOException {
          System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
          System.out.println("\n*********************************************");
          System.out.println("---------------------------------------------");
          System.out.println("Please select an option from the list below: ");
          System.out.println("---------------------------------------------");
          System.out.println("1 - Add");
          System.out.println("2 - Subtract");
          System.out.println("3 - Multiply");
          System.out.println("4 - Divide (remainder included)");
          System.out.println("5 - Maximum and minimum value of two numbers");
          System.out.println("6 - Squareroot");
          System.out.println("7 - Absolute value of numbers");
          System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
          System.out.println("9 - Round numbers");
          System.out.println("0 - Exit program");
          System.out.println("**********************************************");
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your option and hit <ENTER>: ");
                         choice1 = inStream.readLine();
                         int c1 = Integer.parseInt(choice1);
                         System.out.println("\nYou have entered choice number: " + c1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
                         inputCorrect = false;
                    return choice1;
     public String inputNumber2() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
                         num2 = br2.readLine();
                         double n2 = Double.parseDouble(num2);
                         System.out.println("\nThe second number you have entered is: " + n2);
                         System.out.println("\nYour numbers are: " + num1 + " and " + num2);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
                         inputCorrect = false;
                    return num2;
     public int Calculator() {
          int choice2 = (int) Double.parseDouble(choice1);
          switch (choice2) {
                    case 1 :
                         Add();
                         System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 2 :
                         Subtract();
                         System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 3 :
                         Multiply();
                         System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 4 :
                         Divide();
                         System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
                         Modulus();
                         System.out.print(" and the remainder is " + decimals.format(answer));
                         break;
                    case 5 :
                         maximumValue();
                         System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         minimumValue();
                         System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 6 :
                         Squareroot1();
                         System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
                         Squareroot2();
                         System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 7 :
                         absoluteNumber1();
                         System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
                         absoluteNumber2();
                         System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 8 :
                         octalEquivalent1();
                         System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
                         octalEquivalent2();
                         System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
                         hexadecimalEquivalent1();
                         System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
                         hexadecimalEquivalent2();
                         System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
                         break;
                    case 9 :
                         Round1();
                         System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
                         Round2();
                         System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 0 :
                         if (choice2 == 0) {
                              System.exit(1);
                         break;
               return choice2;
          public String anotherCalculation() throws IOException {
               boolean inputCorrect = false;
               while (inputCorrect == false) {
                         try {
                              BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
                              System.out.print("\nWould you like to do another calculation? Y/N ");
                              more = br3.readLine();
                              String s1 = "y";
                              String s2 = "Y";
                              if (more.equals(s1) || more.equals(s2)) {
                                   inputCorrect = true;
                                   while (inputCorrect = true){
                                        inputNumber1();
                                        System.out.println("");
                                        calculatorChoice();
                                        System.out.println("");
                                        inputNumber2();
                                        System.out.println("");
                                        Calculator();
                                        System.out.println("");
                                        anotherCalculation();
                                        System.out.println("");
                                        inputCorrect = true;
                              } else {
                                   System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
                                   System.out.println("the program will now exit, Goodbye.");
                                   System.exit(0);
                         } catch (IOException ex){
                              System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
                              inputCorrect = false;
          return more;
     public static void main(String[] args) throws IOException {
          Project p1 = new Project();
          p1.insertNameAndSurname();
          System.out.println("");
          p1.inputNumber1();
          System.out.println("");
          p1.calculatorChoice();
          System.out.println("");
          p1.inputNumber2();
          System.out.println("");
          p1.Calculator();
               System.out.println("");
               p1.anotherCalculation();
               System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advance

Smirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name.

Need help with SQL retrieval for previous month till current date

Hi ,
Need help generating statistics from previous month from date of enquiry till current date of enquiry.
and have to display it according to date.
Date of enquiry : 03/02/2012
Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
sample1 20 30 40
sample 2 40 40 50
sample 3 50 30 30
Hope you guys can help me with this.
Regards

Hi,
932472 wrote:
Scenario
1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
2)displaying the count of the application made based on the date.
Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
sample 1 30 40 50 44 30
sample 2 35 45 55
sample 3 36 45 55Explain how you get those results from the sample data you posted.
It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
SELECT     application_type as Application_type
,     COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END)     AS 01012012 (should be getting dynamically)
,     COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END)     AS 02022012
,     COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END)     AS 03022012
, COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END)     AS 04022012
FROM     table_1
GROUP BY application_type
ORDER BY     application_typeThat's the bais idea.
You can simplify it a little by factoring out the date differences:WITH got_d     AS
     SELECT     qty
     ,     TRUNC ( dt
          - ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                    , -1
          ) AS d
     FROM table1
     WHERE     dt     >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                    , -1
     AND dt     < TRUNC (SYSDATE) + 1
SELECT     SUM (CASE WHEN d = 1 THEN qty END)     AS day_1
,     SUM (CASE WHEN d = 2 THEN qty END)     AS day_2
,     SUM (CASE WHEN d = 62 THEN qty END)     AS day_62
FROM     got_d
See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases.

Not exactly iweb - need help with a graphic for my site

This doesn't fit anywhere so dumping it here. I drew by hand a graphic I want to use with iweb to put on my site as my site's logo. Main problem is that getting the background transparent isn't working well as when it was scanned the scanner didn't back the background "pure" white. I have tried adjusting the whitepoint and setting the color depth down, but still no good. I don't know a ton about graphic program use. I have an older copy of graphic converter that came on this powerbook when i got it. I would be fine having the graphic loose the marker look and have solid fill colors - just I am not good enough with computer drawing tools to do it on the computer! So I either need to get a volunteer to help me out, or some help with some detailed instructions to get this to work out... (also I am broke so no cost/shareware is only option here)
many thanks!!!!
I can get you a scanned jpg of the pic if needed.

THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png

Need performance! - Need help with Server Architecture for SSAS on Azure VM

I would like to build 100% Azure VM base solution. We can install as many as needed.
I have large amount data in DW. (100GB-1000GB)
I would like to provide PowerView reports in SharePoints.
I would like to have report data be as real time as possible. (Min data is updated once in 2 hours)
These are requirements:
-SharePoint 2013
-PowerView
-SSAS OLAP Cube
-SQL Server DW&Staging DB (Currently DW&Staging on same server)
I need help specially what can be done with SSAS to meet requirements? Should be installed to own application server? Possible to install multiple SSAS? SSRS needs own server?
I appreciate also links to server topology diagrams.
Kenny_I

I assume you mean 100GB-1000GB (not 1000TB) right?
For Sharepoint I would refer to the sizing guide for diagrams and sizing:
http://technet.microsoft.com/en-us/library/ff758647(v=office.15).aspx
SSRS (and Power View) will run in the SharePoint farm on a SharePoint app server potentially with other SharePoint services.
I would definitely put SSAS on a dedicated server for a cube that size. Depending on how well your data compresses, there may not be a VM in Azure with enough RAM to put your model into a Tabular SSAS model. I would prototype it with a subset of data to see
how well it compresses. You can always use a Multidimensional model as a fallback.
Depending on how much processing the SSAS model impacts user queries (since it is happening during the day) you could build an SSAS processing server and a separate SSAS query server and run the XMLA Synchronize command to copy the cube incrementally from processing
to query servers.
Does that help?
http://artisconsulting.com/Blogs/GregGalloway

Need help with XI certif for technical consultant

Hi XI experts ,
I am trying for certif for Development Consultant SAP NetWeaver u201904 - Exchange Infrastructure & Integration Technology - C_TBIT44_04 .
Can somebody please give me some sample questions and answers?
I really will appreciate such help since I donu2019t have any idea what kind of questions are at the exam!
I only have heard it is not an easy exam to take.?Is this true?
Also any shared experienced will be appreciate it. If you have, please give me more hands on information , not just course numbers and syllabus.
Looking forward to receive info from you. Please use emal contcts in my Business Card.
Thanks in advance all!
Jim

HI,
Yes its true ...any SAP certification is never ever be the easy stuff...that could be easily achievable....
You need to be well prepare for the Certification. There are many SDN links available for sample questions. you can just search on SDN as well as on Internet.
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8
1. SAP XI Certification - Important Topics
2. Regarding XI Certification Material.
3. Xi sample Certification questions
XI certification passing used to be normally 65%. It may vary based on the runtime exam rules.
There are marks as well as no of questions allocated for every section, so you may refer below link
you can go to the following site and check the information.
https://service.sap.com/%7Esapidp/011000358700005902252004E
https://service.sap.com/~sapidp/011000358700003595762004E
SAP XI Certification - Important Topics All about XI certification
Thanks
Swarup

Need help with installing Windows for the bar exam

I need to retake the bar exam in Feb 2011 and I've decided to switch to typing. I am trying to figure out what Windows I need (the software says XP is fine but is that even available anymore)- so can someone walk me through this process? I've partioned my hard drive with the default 5GB but should it be more?
I'm looking at buying Windows- is XP okay or should I shell out for 7-i.e. is one more compatible with Macs?
And then finally, in the installation instructions they mention that I need my Mac OS disc for the process- is that the snow leopard disc or something else? My discs are in storage right now so should I wait until I get them before starting this process or can I get replacements if I accidentally threw them out in moving?
Sorry for all the questions, but well, I'm racing to get everything done and I want to make sure I don't crash my system halfway through the exam!

You don't need Boot Camp, but even XP will have a lot of stuff to update from after the install, and that takes temp space. Just as your Mac shows 5-10GB there is add'l hidden space used.
Apple's 'requirements' has gotten others in trouble and I was pretty sure it was more like 10GB. Plus a lot of XP discs are now SP3.
XP out of the box but connected to the net is just waiting for malware, average is 15 minutes to be infected. 7 is better and just in case you need it again.
System Builder can come in 32 or 64-bit but XP is 32-bit only.
VirtualBox by Oracle is a free VM.
1GB for one program actually seems like a lot, or is that RAM requirement?

Need help with correcting the select statement

I have two tables mkt & error.
The fields of mkt are
app_id (xxx)
c_mkt_id
app_mkt_id
The fields of error table are
mkt_id
intr_id (its in format xxx.yyy or xxx)
xyz
abc
pqr
I have to select * fields from error table such that
->mkt.app_id = error.intr_id (here i am using combination of sbstr & instr to get the part before "." if present)
->mkt.c_mkt_id=error.mkt_id
Where ever the above two conditions match i have to replace the mkt_id field in my select * from error table query with the
app_mkt_id field from mkt table. If the above two condtions dont match my select * from error table should return the original mkt_id present in the error table.
I have presently developed a query(*) which selects the app_mkt_id from mkt table where ever the two conditions match.
How should i go about using this to get my actual requirement.
(*)=select app_mkt_id from mkt where app_id in (select case when case_when=1 then substr(intr_id, 1, instr(intr_id,'.')-1) else substr(intr_id, 1) end from (select intr_id, case when instr(intr_id,'.',1)=0 then 0 else 1 end case_when from error)) and
c_mkt_id in (select mkt_id from error)

you wrote:
(*)=select app_mkt_id from mkt where ....What is this?
If you are writing PL/SQL the syntax is:
SELECT ....
INTO ....
FROM ....
WHERE ....This seems to be school work and thus you really need to puzzle this out for yourself.

MOVED: need help with finding gpu for win 7

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=128552.0

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Need help with user ID for this forum

I have problem that I can't seem to get resolved online which involves my Apple Support user ID... Sorry to post this here, but I don't know where to go for help.
I have been a member of the apple community for a long time (since 2002) but my login ID and user ID seem to have been disconnected. Happened when I tried to sign in once and had all kinds of problems. Now I've created a new user ID but would like my old one back. I've tried several times to get my original user ID back, but there seems to be no way to get it back... If I sign up for the user ID, it tells me that it is taken (because its mine).
Can you help me? Is there a real person I can contact who can help me?
Thanks for any support.

try calling Apple suport

Need help with correct email settings for several devices and Gmail

My work email is set up on my 2 macs in mac mail with the IMAP setting. I also have my email routed to gmail. How can I set up my email so they download to all 3 locations without them disappearing or rerouting after I read them? Currently, if I open an email on one device, it typically disappears and the eventual locaiton tends to be gmail where they stay forever. This morning, one of my devices got an email I was waiting for, and the other did not.

My work email is set up on my 2 macs in mac mail with the IMAP setting. I also have my email routed to gmail. How can I set up my email so they download to all 3 locations without them disappearing or rerouting after I read them? Currently, if I open an email on one device, it typically disappears and the eventual locaiton tends to be gmail where they stay forever. This morning, one of my devices got an email I was waiting for, and the other did not.

Need help with designing form for exports

Hi
I am pretty new to designing form in adobe acrobat.
I have adobe acrobat 9 standard with Adobe liveCycle Designer installed.
There are couple of things I want to do.
1.
I would like to add a box where I can change the number (default is 1), and when I increase it, (for instance to two)
then
it will postulate the particular sections twice.
For instance, I am taking two drugs right now, then I would like to increase the number of drugs to 2, so then for each drug
I would enter appropriate information such as drug name, drug form, route of drug administration etcs
I hope this is clear
2.
I am trying to export this in xml format so that only the ones where the user fills in in pdf form gets exported to xml format.
I would like the boxes to have its own tag, for instance the drug name mentioned above can have a tag of <drugname></drugname>
I know this is possible through changing the box's name in binding tab.
What I am interested in is to add a tag for the section, like a header.
For example, if I were to enter two drug information I want the first drug information to be exported to be
<drug>
<drugname>blah</drugname><drugform>1</drugform><drugroute>oral</drugroute>
</drug>
<drug>
<drugname>drug2</drugname><drugform>1</drugform>
<drugroute>ophthalmic</drugroute>
</drug>
how would I add <drug> </drug> for each drug?
also, can I change the order of the tags??
in the pdf form, if the drugname box is displayed later than drugroute box, then when I export it, it will display as
<drugroute>oral</drugroute><drugname>blah</drugname>
but I want to manually set the order of tags when exported.
Sorry I asked so many questions
I hope it is clear enough for you to visualize what I am trying to do
Thank you so much

1. You can certainly add sections for the number of drugs that the user specifies pr
ovided that the form is set up the correct way to begin with. The drug information section must be wrapped in a subform (usually Poistioned) and that in turn must be wrapped in a flowed subform. Then the form must be saved as dynamic. If this information is all that is on the form then that shoudl be all you need to do. If th edrug section is in the middle of the form then you need to wrap the other parts of the form in a subform so they can be pushed down when we add the drug subforms. It can get confusing ...seeing the form amnd its structure would help to clarify.
2. You canbnot change the names of tags on the fly but you can change their values. AS mentioned above, when you wrap the Drug information in a subform that subform name can be used as a tag in the XML. Then you could have a node with the tag (or an attribute) that names the drug in question. Something like this:
<Drug Section>
     <Drug>
          <DrugName></DrugName>
          <Dossage></Dossage>
          <Supplier></Supplier>
     </Drug Subform>
     <Drug>
          <DrugName></DrugName>
          <Dossage></Dossage>
          <Supplier></Supplier>
     </Drug>
</Drug Section>
As mentioned earlier this is always easier to explain when you see it in context of your form.....if you want to send it to me at [email protected] I can get you started at least. Please include a description of your issue in the email
Paul

Need help with correction inscript for duplication on regular basis

Similar Messages

Maybe you are looking for