Need help with create page based on template

I created a template on my class computer and i created few
pages based on it.
Today i moved all the file&folders to my private
computer, and when i tried to create a new page based on the
template I got a messege:
Error accessing file: "c:\sigal\....\template_site.dwt"
sharing violation (error code 32)
What is wrong? What do I have to do?
Can anybody help me please???
10x

Please respond to your reply on the DW forum.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"michal2401" <[email protected]> wrote in
message
news:eds23r$nhp$[email protected]..
>I created a template on my class computer and i created
few pages based on
>it.
>
> Today i moved all the file&folders to my private
computer, and when i
> tried to
> create a new page based on the template I got a messege:
> Error accessing file: "c:\sigal\....\template_site.dwt"
sharing violation
> (error code 32)
>
> What is wrong? What do I have to do?
>
> Can anybody help me please???
>
> 10x
>
>
>

Similar Messages

Need help with create trigger based on more then 1 table and join.

Hello,
Here i have 3 tables
1. Employee
PERSON_ID
1
1
N
NUMBER
None
ORG_ID
2
N
NUMBER
Frequency
LOC_ID
3
N
NUMBER
Frequency
JOB_ID
4
Y
NUMBER
Height Balanced
FLSA_STATUS_ID
5
Y
NUMBER
Frequency
FULL_NAME
6
N
VARCHAR2 (250 Byte)
Height Balanced
FIRST_NAME
7
N
VARCHAR2 (20 Byte)
Height Balanced
MIDDLE_NAME
8
Y
VARCHAR2 (60 Byte)
Height Balanced
LAST_NAME
9
N
VARCHAR2 (40 Byte)
Height Balanced
PREFERRED_NAME
10
Y
VARCHAR2 (80 Byte)
None
EMAIL
11
Y
VARCHAR2 (250 Byte)
None
MAILSTOP
12
Y
VARCHAR2 (100 Byte)
None
HIRE_DATE
13
N
DATE
None
2. ems_candidate
EMS_CANDIDATE_ID
1
1
N
NUMBER
None
EMS_JOB_ID
2
Y
NUMBER
Frequency
NAME
3
N
VARCHAR2 (255 Byte)
Frequency
EMAIL
4
Y
VARCHAR2 (255 Byte)
None
TELEPHONE
5
Y
VARCHAR2 (25 Byte)
None
EMS_SOURCE_ID
6
Y
NUMBER
Frequency
RECEIVED_DATE
7
Y
DATE
Frequency
COMMENTS
8
Y
VARCHAR2 (4000 Byte)
None
3. employee_resources
EMP_RES_ID
1
1
N
NUMBER
None
PERSON_ID
2
Y
NUMBER
Height Balanced
CANDIDATE_ID
3
Y
NUMBER
Frequency
EMP_START_DATE
4
Y
DATE
None
CUSTOM_RESOURCE_FLAG
5
Y
NUMBER (1)
None
RESOURCE_GROUP_ID
6
N
NUMBER
Frequency
RESOURCE_STATUS_ID
7
N
NUMBER
Frequency
GROUP_LOC_ID
8
N
NUMBER
Height Balanced
ASSIGNED_JIRA
9
Y
VARCHAR2 (250 Byte)
None
REVOKED_JIRA
10
Y
VARCHAR2 (250 Byte)
None
CREATED_DATE
11
Y
DATE
SYSDATE
None
UPDATED_DATE
12
Y
DATE
None
Now i want to create trigger when new record get inserted in employee table wanted to update person_id in employee_resources table.
So i want to match ems_candidate.name with employee.full_name , ems_candidate.ems_job_id with employee.ems_job_id. And if it matched then update person_id in employee_resources table else through an exception and insert record in temp table.
If anybody has an idea can u please help me.
Thanks,
Gayatri.

I created below trigger
CREATE TRIGGER emp_resources_upd_person_id
AFTER INSERT ON ems.employee
FOR EACH ROW
BEGIN
    UPDATE ems.employee_resources
       SET person_id = :new.person_id
     WHERE candidate_id = (SELECT ems_candidate_id
                             FROM ems.ems_candidate cand, ems.employee emp
                            WHERE TRIM(UPPER(emp.first_name)) = TRIM(UPPER(SUBSTR (cand.name, 1, INSTR (cand.name, ' ') - 1)))
                              AND TRIM(UPPER(emp.last_name)) = TRIM(UPPER(SUBSTR (cand.name,INSTR (cand.name, ' ') + 1,DECODE (INSTR (SUBSTR (cand.name, INSTR (cand.name, ' ') + 1), ' '),0,LENGTH (cand.name),(INSTR (SUBSTR (cand.name, INSTR (cand.name, ' ') + 1), ' ') - 1)))))
                              AND emp.person_id = :new.person_id);
EXCEPTION
WHEN OTHERS THEN
    INSERT INTO ems.update_person_id_exception(person_id,first_name,last_name,full_name) VALUES(:new.person_id,:new.first_name,:new.last_name,:new.full_name);
END;
Now when i am trying to insert row in ems.employee table it gives me an error
ORA-04091
table string.string is mutating, trigger/function may not see it
Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
Action: Rewrite the trigger (or function) so it does not read that table.
Can anybody please help me to come out from these error.
Thanks,
Gayatri.

I need help with creating PDF with Preview...

Hello
I need help with creating PDF documetns with Preview. Just a few days ago, I was able to create PDF files composed of scanned images (notes) and everything worked perfectly fine. However, today I was having trouble with it. I scanned my notebook and saved 8 images/pages in jpeg format. I did the usual routine with Preview (select all files>print>PDF>save as PDF>then save). Well this worked a few days ago, but when I tried it today, I was able to save it, but the after opening the PDF file that I have saved, only the first page was there. The other pages weren't included. I really don't see anything wrong with what I'm doing. I really need help. Any help would be greatly appreciated.

I can't find it. I went into advanced and then document processing but no batch sequence is there and everything is grayed out.
EDIT: I realized that you cant do batch sequences in standard. Any other ideas?

I need help with Creating Key Pairs

Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC�� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm��9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B��T� xp ��ccR}o��[!#I��lo��
��^"`8�|��Z>��&
d ��"B��
^5��a��jw9��D��D�)�*3/h��7�|��I�d�$�4f�8_�|��yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.

I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
}

Need help with my usecase based on transient ViewObject

I am using 11.1.1.4.0 Jdev version. I need help with my usecase.Been trying it for 2 days but couldn't figure out the issue.
I have a transientVO . In this VO Rows will be populated programmatically. CountryId is an attribute of this VO. I have created a viewAccessor "CountriesVA" from Country VO of HR schema.
I have a LOV for the countryId which is based on this VA ,getting countries from CountryTable.
This is the model part which works fine.
Before the page load i have called a method to create a row for this transientVO.Once the row is created i can see the SOC in my page which i have created as below.
Now i want to insert a row in the transientVO if user selects a country and restrict duplicate entry . (As One row is already created 1st time there will be no rows created.after that rows will be inserted)
The issue is :: Suppose there are 2 countries. A & B .When user does the following actions :
Insert A . Done //as 1st entry
Insert B . Done //as 1st time entry
Insert A . duplicate not inserted
Insert B . getting inserted // the bug.
<af:selectOneChoice value="#{bindings.CountryId.inputValue}"
                        label="#{bindings.CountryId.label}"
                        required="#{bindings.CountryId.hints.mandatory}"
                        shortDesc="#{bindings.CountryId.hints.tooltip}" id="soc1"
                        immediate="true" autoSubmit="true"
                        valueChangeListener="#{pageFlowScope.managedBean.countryIdVC}">
    public void countryIdVC(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        String oldValue=null;
          setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
          if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
         oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
                setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
        String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
         //access the underlying RowSetIterator
         RowSetIterator rsi = dciter.getRowSetIterator();
      boolean duplicate=true;
      if(oldValue!=null){
                rsi.getCurrentRow().setAttribute("CountryId", oldValue);
    // Row row= rsi.findByKey(new Key(new Object[] { newValue}), 1)[0];
      Key key =new Key(new Object[] { newValue});
      Row row=rsi.getRow(key);
      if(row==null){
      System.err.println(duplicate);
        duplicate=false;
      }else{
        rsi.setCurrentRow(row);
         if(!duplicate){
         //get handle to the last row
         Row lastRow = rsi.last();
         //obtain the index of the last row
         int lastRowIndex = rsi.getRangeIndexOf(lastRow);
         //create a new row
         Row newRow = rsi.createRow();
         newRow.setAttribute("CountryId", newValue);
         //initialize the row
         newRow.setNewRowState(Row.STATUS_INITIALIZED);
         //add row to last index + 1 so it becomes last in the range set
         rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
         //make row the current row so it is displayed correctly
         rsi.setCurrentRow(newRow);

I read the reply from Andrejus Baranovskis and thought of studying and implementing that in my useCase.Well it worked . I implemented the same Logic but rowIteration was done in AppModule.
Con-Fusion, Bugs, Facts &amp; Workarounds: Iterating through View Object RowIterator Bug.(NOT ADF BUG, Development B…
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcservices.htm#sm0206
9.7.6 What You May Need to Know About Programmatic Row Set Iteration
The problem is solved ,the above links helped me solve the problem.
what i did is i have created a method in appmodule to iterate rows and all the method y operation bindings and my logic works fine ....
MY Advice to all Adf developers ,though i am not an expert but i can assure you to follow the above process for rowIteration.If you use the iterator binding in the manage bean to navigate the rows u'll face issues which are unexpected.
In AppModule :::::
    public boolean createRow(String oldValue,String newValue){
     System.err.println(oldValue+""+newValue);
      ViewObjectImpl vo=getViewObj1();
      boolean duplicate=false;
      if(oldValue!=null){
      RowSetIterator iter = vo.createRowSetIterator(null);
      System.err.println("iterating rows ");
         while (iter.hasNext()) {
             Row r = iter.next();
             System.err.println(iter.getRangeIndexOf(r)+" row is "+r.getAttribute("CountryId"));
             if(r.getAttribute("CountryId").toString().equals(newValue)){
                 duplicate=true;
                 break;
             // Do something with the current row.
         // close secondary row set iterator
         iter.closeRowSetIterator();
      return duplicate;
In ManageBean :::::
    public void countryIdVC(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        String oldValue=null;
       System.err.println("Old Value"+valueChangeEvent.getOldValue());
          setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
          if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
         oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
                setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
        String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         //access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
         //in this sample
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
         //access the underlying RowSetIterator
         RowSetIterator rsi = dciter.getRowSetIterator();
         if(oldValue!=null){
                      rsi.getCurrentRow().setAttribute("CountryId", oldValue);
           OperationBinding operation = bindings.getOperationBinding("createRow");
           operation.getParamsMap().put("oldValue", oldValue);
           operation.getParamsMap().put("newValue", newValue);
      if(!(Boolean)operation.execute()){
      //get handle to the last row
      Row lastRow = rsi.last();
      //obtain the index of the last row
      int lastRowIndex = rsi.getRangeIndexOf(lastRow);
      //create a new row
      Row newRow = rsi.createRow();
      newRow.setAttribute("CountryId", newValue);
      //initialize the row
      newRow.setNewRowState(Row.STATUS_INITIALIZED);
      //add row to last index + 1 so it becomes last in the range set
      System.err.println("Inserting row at index "+lastRowIndex+1);
      rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
      //make row the current row so it is displayed correctly
      rsi.setCurrentRow(newRow);
      else{
        System.err.println("Data found So not inserting,only setting current Row");
      Key key =new Key(new Object[] { newValue});
        rsi.setCurrentRow(rsi.getRow(key));

Need help with creating a brush

Hi guys,
I wanted to ask for help with creating a brush (even a link to a tutorial will be goon enough ).
I got this sample:
I've created a brush from it, and i'm trying to get this kind of result:
but it's only duplicates it and gives me this result:
Can someone help me please understand what i need to define in order to make the brush behave like a continues brush instead of duplicate it?
Thank you very much
shlomit

what you need to do is make a brush that looks like the tip of a brush. photoshop has several already but you can make your own that will be better.
get a paintbrush and paint a spot kind of like what you did but dont paint a stroke. make it look kindof grungy. then make your brush from that, making sure to desaturate it and everything.
EDIT:
oh, and if you bring the fill down to like 10-20% your stroke will look better

I need help with creating some formulas

I'm not sure if anyone around here can help me, but I'm trying to create a Numbers document and need some help with creating a formula/function.
I have a column of amounts and I would like to create a formula which deducts a percentage (11.9%) and puts the result in another column.
If anyone can help me, it would be greatly appreciated.

Here is an example that shows one way to do this:
The original data is in column A. In column B we will store formulas to adjust the amounts:
1) select the cell where you want to formula (in this case cell B2)
2) Type the "=" (equal sign):
3) click cell A2:
4) now type the rest of the formula which is: "*(100-11.9)/100" that is asterisk, then open parenthesis, 100 minus eleven point nine close parenthesis forward slash one hundred
The Asterisk is the multiply operator (times) and the forward slash is the division operator (divide)
now hit return. select cell B2 and hover the cursor over the bottom edge of the cell:
drag the little yellow dot down to "fill" the formula down as needed.

Need help with creating template. Changes are not going through to index.html page

Hi all,
I have an issue with my template that I am creating and also a question about creating template Regions (Repeating and Editable).
Somehow my changes to my index.dwt are not changing my index.html page.
Also my other question is: For my top navigation bar and left navigation bar links, do I need to select and define each individual button or link as Repeating/Editable Region? or can I just select the whole navigation bar (the one on the top) etc...
Below are my steps for creating my template...I am kinda fairly new to using DW and this is my first attempt to making a template following the DW tutorial CD that came with DW CS3.
I appreciate any help with this...regards, Dano
-Open my index.html file
-File/save as template
-Save
-update links - yes
-Select Repeating and Editable Regions (I selected the whole top navigation bar and selected Repeating Region and Editable Region, same with the left side navigation links)
-File close all
-Open the index.dwt
-Save as and selected the index.html and chose to overide it..
When I make changes to my index.dwt it is not changing the index.html
I feel that I am missing some important steps here.....
Website address
www.defenseproshop.com

Figured out

Need help with creating custom form

hi all,
i'm working on creating a new form. it has 2 blocks for 2 tables. headers and lines tables. the headers table mostly have columns that are id's from other tables. i.e. customer_id, location_id etc.. in my screen, obviously i would not show the id's. i'll display the descriptions / names of the id's instead like customer_name for customer_id... but in order to do this i created a table that joins more than 2 tables. so in the block query data source name, i enter the name of this view.. then i add a ON-INSERT, ON-UPDATE, ON-DELETE triggers at block level and i call the corresponding package which does the insert, update and delete. i'm able to insert but update and delete causes a problem. "ORA-01445: cannot select ROWID from, or sample, a join.. ".. i'm thinking the reason is that when the form does an update or delete, it locks the record which causes the error.. also the reason i need the view is because i need to be able to query the customer_name in the screen instead of the customer_id... what i can't figure out is how i can make this work... or a work-around may be...
can anyone help.
thanks

Matt Rasmussen wrote:
You're right that the form is locking the record so you just need to control how it locks the record with an on-lock trigger. From the Oracle Applications Developer's Guide:
page 3-9:
When basing a block on a view, you must code ON–INSERT, ON–UPDATE, ON–DELETE, and ON–LOCK triggers to insert, update, delete, and lock the root table instead of the view.
Most of the on-lock triggers I have written follow this template:
<pre>     SELECT     field1, field2, field3
     INTO     :block.field3, :block.field2, :block.field3
     FROM     view
     WHERE     rowid = :block.row_id
     FOR UPDATE OF field1, field2, field3;</pre>
I think once you've added this trigger, your form will work the way you want it.hi,
i tried your suggestion but still get the same error.. anyways, here are the details of what i have so far.
here's my table.
CREATE TABLE XXPN_VR_VOL_HEADERS_ALL
VOL_HEADER_ID     NUMBER,
CUSTOMER_ID       NUMBER,
LEASE_ID          NUMBER,
LOCATION_ID       NUMBER,
VAR_RENT_ID       NUMBER,
PERIOD_SET_NAME   VARCHAR2(15 BYTE),
PERIOD_NAME       VARCHAR2(15 BYTE),
IMPORT_FLAG       VARCHAR2(1 BYTE),
IMPORT_DATE       DATE,
CALC_TYPE         VARCHAR2(30 BYTE),
PASSTHROUGH_FLAG VARCHAR2(1 BYTE),
COMMENTS          VARCHAR2(2000 BYTE),
CREATED_BY        NUMBER,
CREATION_DATE     DATE,
LAST_UPDATED_BY   NUMBER,
LAST_UPDATE_DATE DATE
);here's my view.
create or replace view xxpn_vr_vol_headers_v ( row_id
                                              ,vol_header_id
                                              ,customer_id
                                              ,customer_name
                                              ,lease_id
                                              ,lease_name
                                              ,lease_number
                                              ,location_id
                                              ,location_code
                                              ,var_rent_id
                                              ,var_rent_number
                                              ,period_set_name
                                              ,period_name
                                              ,import_flag
                                              ,import_date
                                              ,calc_type
                                              ,passthrough_flag
                                              ,created_by
                                              ,creation_date
                                              ,comments
                                              ,last_updated_by
                                              ,last_update_date )
as
select xvvha.rowid
        ,xvvha.vol_header_id
        ,xvvha.customer_id
        ,hp.party_name
        ,xvvha.lease_id
        ,pl.name
        ,pl.lease_num
        ,xvvha.location_id
        ,loc.location_code
        ,xvvha.var_rent_id
        ,pvr.rent_num
        ,xvvha.period_set_name
        ,xvvha.period_name
        ,xvvha.import_flag
        ,xvvha.import_date
        ,xvvha.calc_type
        ,xvvha.passthrough_flag
        ,xvvha.created_by
        ,xvvha.creation_date
        ,xvvha.comments
        ,xvvha.last_updated_by
        ,xvvha.last_update_date
    from xxpn_vr_vol_headers_all xvvha
        ,hz_parties hp
        ,pn_leases_all pl
        ,pn_locations_all loc
        ,pn_var_rents_v pvr
   where -1 = -1
     and xvvha.customer_id = hp.party_id (+)
     and xvvha.lease_id = pl.lease_id (+)
     and xvvha.location_id = loc.location_id (+)
     and xvvha.var_rent_id = pvr.var_rent_id (+);here's my ON-UPDATE trigger block level
begin
xxpn_vr_vol_data_pkg.update_vr_vol_hdr_data ( p_vol_header_id     => :XXPNVRVOLHDRS.vol_header_id
                                               ,p_customer_id       => :XXPNVRVOLHDRS.customer_id
                                               ,p_lease_id          => :XXPNVRVOLHDRS.lease_id
                                               ,p_location_id       => :XXPNVRVOLHDRS.location_id
                                               ,p_var_rent_id       => :XXPNVRVOLHDRS.var_rent_id
                                               ,p_period_set_name   => :XXPNVRVOLHDRS.period_set_name
                                               ,p_period_name       => :XXPNVRVOLHDRS.period_name
                                               ,p_import_flag       => :XXPNVRVOLHDRS.import_flag
                                               ,p_passthrough_flag => :XXPNVRVOLHDRS.passthrough_flag
                                               ,p_comments          => :XXPNVRVOLHDRS.comments
                                               ,x_last_updated_by   => :XXPNVRVOLHDRS.last_updated_by
                                               ,x_last_update_date => :XXPNVRVOLHDRS.last_update_date );
end;here's my code in ON-LOCK trigger block level
begin
select lease_id
        ,lease_name
        ,lease_number
        ,location_id
        ,location_code
        ,customer_id
        ,customer_name
        ,var_rent_id
        ,var_rent_number
        ,period_name
        ,comments
        ,period_set_name
        ,import_flag
        ,passthrough_flag
        ,created_by
        ,creation_date
        ,last_updated_by
        ,last_update_date
    into :XXPNVRVOLHDRS.lease_id
        ,:XXPNVRVOLHDRS.lease_name
        ,:XXPNVRVOLHDRS.lease_number
        ,:XXPNVRVOLHDRS.location_id
        ,:XXPNVRVOLHDRS.location_code
        ,:XXPNVRVOLHDRS.customer_id
        ,:XXPNVRVOLHDRS.customer_name
        ,:XXPNVRVOLHDRS.var_rent_id
        ,:XXPNVRVOLHDRS.var_rent_number
        ,:XXPNVRVOLHDRS.period_name
        ,:XXPNVRVOLHDRS.comments
        ,:XXPNVRVOLHDRS.period_set_name
        ,:XXPNVRVOLHDRS.import_flag
        ,:XXPNVRVOLHDRS.passthrough_flag
        ,:XXPNVRVOLHDRS.created_by
        ,:XXPNVRVOLHDRS.creation_date
        ,:XXPNVRVOLHDRS.last_updated_by
        ,:XXPNVRVOLHDRS.last_update_date
    from xxpn_vr_vol_headers_v
   where rowid = :XXPNVRVOLHDRS.ROW_ID
     for update of lease_id
                  ,lease_name
                  ,lease_number
                  ,location_id
                  ,location_code
                  ,customer_id
                  ,customer_name
                  ,var_rent_id
                  ,var_rent_number
                  ,period_name
                  ,comments
                  ,period_set_name
                  ,import_flag
                  ,passthrough_flag
                  ,created_by
                  ,creation_date
                  ,last_updated_by
                  ,last_update_date;
end;properties for the block
Query Data Source Type: Table
Query Data Source Name: XXPN_VR_VOL_HEADERS_V
DML Target Type: Table
DML Target Name: XXPN_VR_VOL_HEADERS_V
i'd appreciate any help.
thanks

Need help with SWF page transitions please :)

I am having an issue recreating something I have seen on
other flash sites... (For example on 2Advanced.com) It is hard to
explain but I will do my best. I am advanced in design, layout,
tweening, and am a beginner to intermediate action scripter. So
even if your solution is a point in the right direction to some
code I could pick up and noodle around with that would be great.
That having been said, on to the issue, it's a 2 parter:
Part 1:
I have a Master FLA (or SWF) containing navigation that loads
secondary SWF pages into movie clip containers for the 5 additional
pages of the site. These load above the Master movie clip masking
it (Navigation floats above) so the loaded pages are sandwiched in
between.
View page in it's current state here:
http://sky.prohosting.com/tk421808/rwip/gallery_MAIN.html
This works ok right now, but I have the SWFs replacing one
another in one single movie clip container. What I would like to do
is similar to shuffling 5 cards... if you want the 4th card down
you pull it out, it goes to the top and slides over the last
visible card on top. So I would like the first page clicked to
slide in covering the master MC, the second page clicked, to slide
in covering that one, and so on and so forth. This would be easy if
the pages were linear, then I could just stack the movie clips, but
since the user will click out of order I need a way to load one
into MC_2 (on top), Then when another is clicked have the MC_2 SWF
move down a level (Swap MC?) to allow the second to slide in above,
and then delete the movie that has moved down into level one
(Bottom) then have this repeat when another movie is clicked. This
way it will look like the page you clicked is always sliding in
over the one you are leaving.
Part 2:
I have no idea how to do this next part but... I believe it
involves a gotoAndPlay. I would like to have animation in the movie
that is unloading after the button for the next page to load is
clicked... in other words, you have loaded a page, you click on
another link, and before the new external SWF page loads, the
current performs a gotoAndPlay where I have animated some
de-constructing swipes that remove the text, shapes holding the
text, and the image. ONLY THEN does it start to load the movie for
the link it selected. I think what I am trying to ask here is how
does it carry the link through the unloading animation until it's
done and then execute the loading of the new external SWF of the
link they just clicked?
I pray this makes sense... If not I would be happy to explain
further. :) Thanks in advance for any help!

>> I have no idea how to do this next part but... I
believe it involves a
gotoAndPlay. I would like to have animation in the movie that
is unloading
after the button for the next page to load is clicked... in
other words,
you
have loaded a page, you click on another link, and before the
new external
SWF
page loads, the current performs a gotoAndPlay where I have
animated some
deconstructing swipes that remove the text, shapes holding
the text and them
the image, and ONLY THEN does it start to load the movie for
the link it
selected. I think what I am trying to ask here is how does it
carry the
link
through the animation until it's done and then execute the
loading of the
external SWF of the link they just clicked?
<<
You don't use frames. I'd probably use Fuse for this - which
is a sequencing
engine. (www.mosessupposes.com) You can call a function when
the sequence is
done animating - using what's known as a callBack function.
That'd be the
best way, IMO.
For part one, you could either place mutliple empty movie
clips, or just
create them using createEmptyMovieClip - which is a MovieClip
method, and
then load your swfs into them with MovieClipLoader. You can
use swapDepths
for layer control, in order to have any given clip move above
another, layer
wise.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Need help with creating text anchors with tagged text.

Can anyone tell me how to determine the correct value for a "Hyperlink Dest Index" value?
I have a script which creates a tagged text file that specifies about about 280 pages of tables (thank heavens for autoflow) , and would like to add live links between different parts. I can create a text anchor and a hyperlink to it in InDesign. The tagged text definition for the link source is simple and in-line and exports and imports nicely as tagged text. However, I see that all the link destinations, aka text anchors, are all exported at the very end of the tagged text files as global definitions, and thier location iin the document is specified by the property HyperlinkDestIndex. However, I can't figure out how to set this value progammatically. I've spent over an hour exporting links, and it sure isn't anything as obvious as character index in the story.
Any advice appreciated,
Read Roberts

Read, I'm not sure the following is going to help you. It works for external hyperlinks, but you want internal links, right? Anyway, it might give you some clues.
A funny thing: I was reviewing some script where I got links to work, and I spotted a tiny coding error. Links seemed to be defined by two separate identifiers: a "link name", which is what appears in Edit Hyperlink dialog, and a "Dest Key", which seems to be a simple increasing number. However, due to aformentioned coding error, the dest keys between the actual link and its definition were off by '1', so there was no way that ought to have matched. But it still worked! So "Dest Key" is a red herring ...
As far as I understand, it works like this (for hyperlinks): in your text, you have
HplName -- this is actually the 'title' that appears in the Hyperlink palette
HplDest -- this is the 'internal name'
DestKey. Hm. Perhaps you could omit this, per above obsvn.
CharStyleRef, the name of the auto-applied style
Hid -- seems to be always '0'
HplOff: the "offset" from this entire command to the start of the hyperlink, in InDesign characters.
HplLen: the "length" from the hyperlinked text, in InDesign characters.
and in the list of 'proper' definitions, those that appear at the very end of your file:
HplDestDfn -- the internal name again
DestKey -- see above
HplDestUrl -- finally! A real URL! (But you must escape lots of characters, such as the forward slash and colon.)
Hid -- again, always seems to be '0'.
Some of these items are perhaps optional, but experimenting with what may be left out only lead to frustration The Tagged Text guide is far from complete, as I'm sure you already knew.
As noted, some (or all) of the named items need a backslash escape for a few characters, but I can't find a definitive way to determine in advance what is 'good' and what is 'not good'.
The following script creates a Tagged Text file with a couple of working hyperlinks in it -- I don't know if this is of any help for your internal links.
var hyperlinkDest = [];
var text = "This is some text with a link [http://www.jongware.com/idjshelp.html] and another one [http://forums.adobe.com/thread/1014617?tstart=0] in it.";
var tagtext = text.replace (/\[(.+?)\]/g, function (full, match)
                    return makelink (match, 'title:'+match, match, match);
// When done processing plain text, add the destinations at the end:
tagtext += hyperlinkDest.join('');
tagFile = File(Folder.myDocuments+'/__tmp.txt');
if (tagFile.open('w') == false)
          alert ("Unable to create temporary file!");
          exit();
if (File.fs == "Windows")
          tagFile.write ("<ASCII-WIN>\n");
else
          tagFile.write ("<ASCII-MAC>\n");
tagFile.write ("<dcs:HYPERLINK=<cu:1>>\n");
          tagFile.write (tagtext);
tagFile.close();
// 'text' is the actual text that will be clickable
// 'title' is what will appear in the Hyperlinks palette
// 'name' is the internal name in the Edit Hyperlink dialog
// 'url' is the actual URL that will be linked to
function makelink (text, title, name, url)
          var destkey = hyperlinkDest.length;
          // In URL you must escape forward slashes and colons
          // .. and some other characters as well, by the way. There seems to be no list
          url = url.replace(/\//g, '\\/').replace(/:/g, '\\:');
          hyperlinkDest.push ('<HplDestDfn:=<HplDestName:'+name+'><DestKey:'+String(destkey)+'><HplDestUrl:'+url+'><Hid:0>>');
          return '<Hpl:=<HplName:'+title+'><HplDest:'+name+'><DestKey:'+String(destkey)+'><CharStyleRef:HYPERLINK><Hid:0><Brdrv:0><HplOff:0><HplLen:'+String(text.length)+'>>'+text;

Need help with 'division' operation in RTF template

We are using variables in RTF template to perform all data manipulations
To calculate columns where we need to do division operation, using ‘/’ or ‘DIV’ is not working.
Using <?xdofx: op1 DIV op2?> is working only when op1 and op2 are numbers like ex. <?xdofx: 100 DIV 50?> returns result 2.
But the same tag used for columns or variables is not working.
For ex.
<?xdofx: (xdoxslt:get_variable($_XDOCTX, 'var1')) DIV xdoxslt:get_variable($_XDOCTX, 'var2') ?> is not returning any result, though
<?xdoxslt:get_variable($_XDOCTX, ‘var1’)?>
<?xdoxslt:get_variable($_XDOCTX, ‘var2’)?>
both are returning values stand alone.

On Thu, 03 Jan 2008 00:22:31 -0500, Alan
<[email protected]> wrote:
>yes, the use of child page comments in a template file is
probably the
>problem. But if that is solved, having two editable
regions with the same
>name will cause problems.
>
>short version- things be horked big time.
<chuckle /> Methinks you're right. It looks like the
copy/paste monster
has been munching on it. One guess to fix it would be to open
it in a
text editor and change this:



To this:


And change this:
</head>
To this:
</head>
Gary

Need Help with creating Line Graph Chart

I have the following XML Data
<DATA>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Longview</BRANCHDESC>
<LOCATION>30</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>99.9</VALUECURRENTPERIOD>
<QUARTERVALUE>100</QUARTERVALUE>
<YTDVALUE>100</YTDVALUE>
<STDCURRENTPERIOD>99.2</STDCURRENTPERIOD>
<VARIANCE_STD>-.7</VARIANCE_STD>
<VARIANCE_STD_PERCENT>-.7</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>99.97</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>100</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Oakland</BRANCHDESC>
<LOCATION>31</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>100</VALUECURRENTPERIOD>
<QUARTERVALUE>100</QUARTERVALUE>
<YTDVALUE>100</YTDVALUE>
<STDCURRENTPERIOD>100</STDCURRENTPERIOD>
<VARIANCE_STD>0</VARIANCE_STD>
<VARIANCE_STD_PERCENT>0</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>100</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>100</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Seattle</BRANCHDESC>
<LOCATION>32</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>12.4</VALUECURRENTPERIOD>
<QUARTERVALUE>18.7</QUARTERVALUE>
<YTDVALUE>18.7</YTDVALUE>
<STDCURRENTPERIOD>-2527.7</STDCURRENTPERIOD>
<VARIANCE_STD>-2540.1</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.5</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>18.7</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>37.2</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>6.5</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Yakima</BRANCHDESC>
<LOCATION>33</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>36.4</VALUECURRENTPERIOD>
<QUARTERVALUE>68.2</QUARTERVALUE>
<YTDVALUE>68.2</YTDVALUE>
<STDCURRENTPERIOD>-5517.2</STDCURRENTPERIOD>
<VARIANCE_STD>-5553.6</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.7</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>68.17</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>68.6</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>99.5</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Twin Falls</BRANCHDESC>
<LOCATION>34</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>100</VALUECURRENTPERIOD>
<QUARTERVALUE>99.8</QUARTERVALUE>
<YTDVALUE>99.8</YTDVALUE>
<STDCURRENTPERIOD>100</STDCURRENTPERIOD>
<VARIANCE_STD>0</VARIANCE_STD>
<VARIANCE_STD_PERCENT>0</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>99.8</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>99.4</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Spanish Fork</BRANCHDESC>
<LOCATION>35</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>7.7</VALUECURRENTPERIOD>
<QUARTERVALUE>10.2</QUARTERVALUE>
<YTDVALUE>10.2</YTDVALUE>
<STDCURRENTPERIOD>-6016.2</STDCURRENTPERIOD>
<VARIANCE_STD>-6023.9</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.1</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>10.23</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>14.9</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>8.1</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
</DATA>
Note that each Branch_Desc has 12 periods called CURRPERIOD,CURPERSUB1,CURPERSUB2 ...... and 12 values for those periods as VALUECURRENTPERIOD, VALUECURRENTPERIODSUB1, VALUECURRENTPERIODSUB2......
I need to create a Line Graph for each Branch for the 12 periods as defined above where VALUECURRENTPERIOD, VALUECURRENTPERIODSUB1 etc. are the values for that period. The current BIPublisher Chart tool only allows one Value and One Label. In my case I have 12 VALUES (VALUECURRENTPERIOD etc.) and 12 LABELS (CURRPERIOD, CURPERSUB1 etc.). The SERIES or LEGEND should be the Branch Desc . So what I am looking for is to plot values(12 values) for 6 branches (so six lines) over a period of time (12 periods).

Hi Tim,
We have this XML data calculated from several tables where the layout was in the format of One account(a Branch in this case) and 12 periodic values for the same . So reformatting the XML is not going to be easy as the source data is like this itself. I tried un-pivioting the table (as this one is already pivoted) but it looks like Oracle doesn't support this feature yet, but is suported in DB2 or SQL. Please take a look at this link
http://blogs.ittoolbox.com/database/technology/archives/unpivot-query-12798?close=true
So I am stuck with the data in this format and users want a line graph for each branch over he period of time. May be somone on this forum can figure out how to un-pivot a table in Oracle. Thanks for your help in advance.

I need help with creating a rollover within an accordian

I made a feature for my portfolio page.. when you click on an image inside an accourdian my portfolio will drop down.. the only thing im having trouble with is giving the illusion that the string is being pulled down i adjusted the states but when i preview it... theres no response to the rollover nothing is working...Please let me know Thanks so much,
Joe

Hello,
Check this video : http://tv.adobe.com/watch/muse-feature-tour/muse-create-tabbed-and-accordion-panels/
You can see the rollover state under states option here :
You can double check your states and it will work as I have created a short video with image on all 3 stages : http://unidel.worldsecuresystems.com/surjeet/2013-10-28_1503.swf Hope this helps!
Cheers,
Surjeet

Need help with automatic page when a box is filled with a letter

I use the Adobe Livecycle Designer 8.0, version 8.0.1291.1.339988.
I'm trying to make a test for cars in Livecycle, where the car is tested and then there should be a box after every kind of test such as: Brakes front, brakes back, parking brakes, lights, engine, oillevel, exhaust system, clutch and so on..
When a specific letter is written in the box a page should pop-up where the tester can write what the problem is. And then afterwards continune with the rest of the test.
In the box, there should be four choices, a G, R and A. When there's a G there shouldn't pop-up a page, because that part is fine. But when there's a R (reparation) and an A (remark), this page should pop-up with the text of what part of the car it is and a text-field where the mechanic that tests the car can write what needs reparing or what's a remark.
Can anyone help me? I really would appriciate it!
Jacob Langer

To support what King_Penguin has provided, here is a support document that describes the steps to take with a device in Recovery Mode. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Need help with create page based on template

Similar Messages

Maybe you are looking for