Need help with Digital 8
Using iMovie 11.
I have imported and edited my Digital 8 movie but have no idea whatsoever how to save/export it. There is no DVD drive on here so I would like to save to a format to store on a hard drive and play on TVs.
Should I
Export Movie: Medium, Large, HD720, HD1080
or
Export using Quicktime: Movie to - Avi, DV Stream, MPEG 4, Quicktime Movie
Then which options:
DVPAL, DV/DVCPRO-NTSC, DVCPro50-NTSC, H.264, Mpeg4 video.
Any suggestions greatly appreciated.
Overwhelmed
In order to play the video on a TV, you need a device connected to your televison. You need to figure out what device you are going to use to play it back on the TV before you can pick the format.
In the future, you probably don't want to edit interlaced video on iMovie 11. iMovie 11 removes the interlacing and reduces your resolution. iMovie 6 is a better option if you can still find it.
Similar Messages
-
Need help with Digital Certificates when used with Adobe Acrobat
Hi,
I need some urgent help for one of my project. Any help or
guidence would be very much appreciated...
I am using Digital Certificates with Adobe Reader 6.0 and
above and currently if I want to install the process it requires
around 2 steps. Below are the steps.
Once the install now button is clicked.
Step 1. Click on set contract set.
Step2. Click on first un check box, Adobe 7.0 or Adobe 6.0
Step3. Click OK,
Now the Question or issue is, I want to make the above
mentioned steps 1 to step2 automated, once a user downloads this
Digital certificate over the Web. Else if I can pre-select the 2
steps for the ease of the user.
Any help to get this automated would be much
appreciated......Do let me know if anybody has any further
questions...
Pls help...and thanks for helping in advance..much
appreciated...
Cheers
AshishHi Ashish,
Since the title of your post refers to Adobe Acrobat, and the
mention of RoboHelp is conspicuously absent, I suspect you are in
the wrong forum. You probably need the Acrobat forum instead.
Regards,
Anne -
Need help with Digital Camcorder compatibility!
I am looking to buy a digital video camera but I am not sure if they are "compatible" with my iMac. My friend just bought the JVC - Everio Digital Camcorder - Model: GZMG330HUS. It comes with Windows software and the manual has a brief mention of how to Backup-Up the video files onto the Mac but no mention of the video format being compatible with Mac. Anyway we tried plugging it into the Mac to see how it responded, and it did not, except that it saw it as a device that we could access the video files to copy then to the Mac hard drive. The Video files have an extendion .MOD and .MOI. Tried double clicking on the MOD (the video itself) and the Mac gave the message that no application exists to run it.
I really want iMovie to recognize it so I can edit the video and make movies to sent to family.
So, my question is whether any of you have tried this? Is there a solution to get this type of camera to be recognized by iMac? Are there other suggestions for compatible cameras in the $400 range (like this JVC is)?
Thanks in advance.I had an issue with a JVC customer service rep that caused me to return a JVC camcorder that would not work with my iMac. I have since purchased the Panasonic PV-GS320 mini/dv camcorder.
Fantastic video and absolutely no problems. Recognized through iMovie, iDVD and FCE HD 3.5 via firewire. How-ever, you will have to purchase a firewire cable as it is not supplied with the camcorder.
Also in your price range, around $350.00.
Hope this helps. -
Need help with digital audio out on qip7232
Have seen lots of posts about digital and optical outputs from the QIP 7232. I want to run a digital, stereo, 2 channel LPCM signal out to a stereo receiver. There are posts on this forum that say that both outputs are disabled by Verizin. There are other posts that suggest various settings that could be tried but none of these have been confirmed to work. I have set the output to Stereo in the regular menu. I have set the output to LPCM in the hidden menu. Still, no audio output. I do have analogue output from the stereo left and right but want to get digital. Can anyone help ? Does anyone have either the digital or optical outputs working? Thank you Jim {Edited for privacy}
toslink cable will also work with MBP.
-
Need help with digital photos that turn fuzzy in Final Cut Pro 5
I read the whole thread on using still pictures in FCP 5 without finding a solution to the problem I am having these days. The digit pictures I am using are all around 1632 x 1232 pixels (230 dpi), they are about 43.8% after I drop them onto the timeline and I zoom in to no more than 75%. I don't know why dark colour edges in the pictures look pixelated. The picture quality (sharpness) also does not look not as good as it appears in the viewer. I tried resizing them in photoshop before bringing them onto FCP but that does not improve the picture quality. I also tried various video filters: Shift, de-interlace, but without any satisfactory result.
Thank you in advance for any suggestions on this issue.It's almost to start guessing because you seem to have tried everything. But we can't tell if you applied these changes or filters properly without watching you or your output.
My main problem is pixelated edges especially when there is a big contrast in colour. <</div>
this could just be what you're stuck with. DV and MPEG2 are terrible codecs for hard edges. Professionally produced DVDs are carefully encoded using bigger-badder tools than you have at your disposal.
Don't resize your images in PS, just bring them in full size and scale them locally in FCP. An image that is 1kx1k will only display about one-fourth of the image in the Canvas at full size because the Canvas only displays about 500x700 pixels.
The scaling algorithm in FCP totally blows but it's a video app and should not be compared to PS. You do not need Photoshop scaling quality, wasted energy. What you DO need is proper motion blur for your moves, a bit of Gaussian to hide the inevitable artifacting.
Open the manual and look up rendering options and render settings and realtime settings. The FCP5 settings offer some interesting options with meaningless descriptions.
bogiesan -
I need help with digital painting
I have a sketch that I want to add color to but it always turns out flat-looking (if that makes sense). I can't seem to find any good tutorials online on digital painting. Can anyone give me good tips? This is the sketch.
Chrishonda, I may be missing something but . . Can I say painting in digital is very much like painting in canvas. Have you approached it as putting down some light base color in front of the face, say right cheek there. Brush darker as you move away from the cheek bone toward the temple. less dark as you move toward the nose. Then go back the the cheek bone and put down some lighter tone, right where the light would be reflecting off the cheek bone high spot. In PShop, set your brush options to "Fade" in x pixels, try 25 or maybe 100, depending on size and resolution.
You might check out a post or 'how to' on 'painting on layers with 50 gray fill'.
and have fun . -
Need help with Digital Signatures Please
HI Folks,
This is probably a really ignorant question but.....I have
users who download packaged files to run on their own PC. Have run
into the problem of the security warning - Publisher could not be
verified....and providing the choice to run, or cancel the file.
Suggestions?keithgcampbell wrote:
> HI Folks,
>
> This is probably a really ignorant question but.....I
have users who download
> packaged files to run on their own PC. Have run into the
problem of the
> security warning - Publisher could not be
verified....and providing the choice
> to run, or cancel the file. Suggestions?
>
On your web page warn users that this happens or buy a
digital signature
and sign your files?
Andrew Poulos -
Need help with Digital mp3 player MX
Hey guys, when i try to switch on my digital mp3 player it displays a msg saying """"English font only... Download default.rom from cdrom... buildup L2P TABLE() Wrong ulLaddress.....""""
Then it shut down and when i try to connect to the USB cable my computer doesnt find it... so i cannot format the dri've or download the default.rom because i cannot access it from my computer...
Anybody has any suggestions?
Thanx.Hello every one
I have Rhomba or actually an MX00.
After reseting/formating the player according to the instructions on sid4794. I spent my whole Saturday morning for this, I finally managed to revi've my device and I can use it. However when i turn it on I still get the message "English font only" - "download default.rom from the CD". I don't know where my CD is so I downloaded the latest firmware (.07.). Now when I run the file my computer I get a message "your player is not connected please connect your player" this although it is connected,!. I.E. I can transfer files to and from the recognized player but still I am asked to connect it. Therefor I cannot update the firmware. I tried disconnecting and the running the file, Reconnecting and then running the file etc. It just does not work!
Any Ideas on what should I do?
PS. before trouble started I could see files named in Hebrew not now?how can I get it back?
Happy new year! -
Need help with home work see what you got
1. The MEMBERS table has the phone number broken into three fields:
CountryCode - e,g., '1' for the United States
AreaCode - e.g., three digits for the United States
Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
Any or all of the fields may be missing (null) or blank or contain only spaces.
Write a T-SQL statement to concatenate the three fields into a complete phone number
with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
If no Phone is present, return a blank string.
If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
For this purpose, each row contains:
PersonID - unique member identifier
Campaign - name of war/conflict
Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
E.g., PersonID Campaigns
12345678 Global War on Terror, Iraq, Afghanistan
3. The MEMBER_STATISTICS table contains one row per post.
For this purpose, each row contains the post's:
Division - a way of grouping posts by their member size
Department - the state in which the post is located
PostNumber - unique post identifier
Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
Rank them by highest to lowest reinstated count.
Return their Division, Rank, Department, PostNumber, ReinstatedI got 3 home work questions think i have the first two need help with the last one please.
Kinda stuck on #3 hard I can see data not sure witch to sum or count?
1. The MEMBERS table has the phone number broken into three fields:
CountryCode - e,g., '1' for the United States
AreaCode - e.g., three digits for the United States
Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
Any or all of the fields may be missing (null) or blank or contain only spaces.
Write a T-SQL statement to concatenate the three fields into a complete phone number
with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
If no Phone is present, return a blank string.
If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
ANSWER******************
Notes: created a funtion to format the phone
Then used the this function in a select to concatenate Phone
CREATE FUNCTION dbo.FORMATPHONE (@CountryCode int, @AreCode int, @Phone VARCHAR(14))
RETURNS VARCHAR(14)
AS BEGIN
DECLARE @ReturnPhone VARCHAR(14)
DECLARE @NewPhone VARCHAR(14)
-- Note case sets newphone to null if phone null or '' also to see if phone has '-' in it if not inserts into newphone
case
when @Phone is null or @Phone = ''
Then SET @NewPhone = Null
when @Phone = substring(@Phone,4,1)='-'
Then SET @NewPhone = @Phone
else
SET @NewPhone = substring(@Phone,1,3)+'-'+ substring(@Phone,4,4)
End
case
when @NewPhone is null then SET @ReturnPhone = @NewPhone
elese case
when @AreCode is null or @AreCode = '' then SET @ReturnPhone = @NewPhone
else
SET @ReturnPhone = @CountryCode + '(' + @AreCode + ')' + @NewPhone
END
END
RETURN @ReturnPhone
END
select dbo.FORMATPHONE(CountryCode,AreCode,Phone)
from MEMBERS
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
For this purpose, each row contains:
PersonID - unique member identifier
Campaign - name of war/conflict
Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
E.g., PersonID Campaigns
12345678 Global War on Terror, Iraq, Afghanistan
ANSWER******************
SELECT PersonID,
STUFF(( SELECT ',' + Campaign AS [text()]
FROM PERSON_CAMPAIGN
WHERE (PersonID = Results.ID)
FOR XML PATH('')
), 1, 1, '' )
AS Campaigns
FROM PERSON_CAMPAIGN Results
3. The MEMBER_STATISTICS table contains one row per post.
For this purpose, each row contains the post's:
Division - a way of grouping posts by their member size
Department - the state in which the post is located
PostNumber - unique post identifier
Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
Rank them by highest to lowest reinstated count.
Return their Division, Rank, Department, PostNumber, Reinstated -
I need help with controlling two .swf's from third.
Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827 -
Need help with a Spreadsheet style app
I was just wanting some help in working with developing an app for my iphone... i had previous experience in microsoft visual basic but i don't quite understand this code....
I am in flight school and trying to develop an app that reflects the weight an balance forms we do... I am stuck on how to do basic multiplication and division with xcode, i have viewed several videos and tutorials but they each do things differently and i can't seem to bring it together into this app.
So in the picture below.... what i need help with is how to do the following
from
aircraft weight * arm = Moment outbound
front seats * arm = Moment outbound
to fuel @ landing
"0" fuel weight = aircraft weight + front seats + rear seats+ Baggage 1 + baggage 2
If anyone has any ideas or can lend me some tip or places that deal with stuff like this that would be greatA character class [...] robs some otherwise special codes from their magic. The +, for instance, is interpreted as a plus, not as "repeat ad nauseum" anymore.
So your try [\d+] will simply match either a single digit or a single plus. The solution is to move the + outside of the character class
[\d]+
.. and in that case there is no reason anymore to create a class for just digits, as you got it already.
The period *needs* to be escaped, because otherwise it will match *any* character.
Try this for a change:
\d+\.\d+ -
Need help with raw fine tuning version
I am a new user of the aperture 2. I just activated my copy of aperture by the trial key provided by apple.
Everything looked nice except when I imported some raw images of Fujifilm S5PRO, the raw decoder available are only 1.0 and 1.1. There are no option for 2.0. Also the recovery function under exposure is disabled.
Need help with this, how could I solve and get back to a 2.0 decoder?
Aperture Version is 2.01
MAC OSX 1.5.2Hi KelseyyBevann,
Welcome to the Support Communities!
Is this the update that you tried to download?
Digital Camera RAW Compatibility Update 4.06
http://support.apple.com/kb/DL1656
What version of the operating system do you have?
When you attach your camera do you see it in Finder?
If so, you can import the photos into iPhoto this way:
iPhoto '11: Import photos from your hard disk or other computers
http://support.apple.com/kb/PH2357
Judy -
Im DROWNING! need help with a simple java assignment! plz someone help me!
i need help with my java assignment, with validating a sin number. easy for must who know java. im drowning... please help!
You will need to store each digit of the social insurance number in a field of its own. To validate the entry you will:
1. Multiply the 2nd, 4th, 6th and 8th digit by 2.
2. If the product of any of the four multiplications result in a value greater than 9, add the two resulting digits together to yield a single-digit response. For example 6 * 2 = 12, so you would add the 1 and the 2 to get a result of 3.
3. Add these four calculated values together, along with the 1st, 3rd, 5th, and 7th digits of the original number.
4. Subtract this sum from the next highest multiple of 10.
5. The difference should be equal to the 9th digit, which is considered the check digit.
Example of validating S.I.N. 765932546
1st digit 7
2nd digit (6*2 =12 1+2=) 3
3rd digit 5
4th digit (9*2 = 18 1+8 =) 9
5th digit 3
6th digit (2*2 = 4) 4
7th digit 5
8th digit (4*2 = 8) 8
Total 44 next multiple of 10 is 50
50-44 = 6 which is the 9th digit
Therefore the S.I.N. 765932546 is Valid
********* SIN Validation *********
Welcome - Please enter the first number: 120406780
Second digit value multiplied by 2 4
Fourth digit value multiplied by 2 8
Sixth digit value multiplied by 2 12
Eighth digit value multiplied by 2 16
Value derived from 6th digit 3
Value derived from 8th digit 7
The total is 30
Calculated digit is 10
Check digit must be zero because calculated value is 10
The SIN 120406780 is Valid
this is my assignemtn this is what i have! i dont know where to start! please help me!
/* File: sinnumber.java
Author: Ashley
Date: October 2006
Purpose: Lab1
import java.util.Scanner;
public class Lab1
public static void main(String[] args)
Scanner input = new Scanner(System.in);
int sin = 0;
int number0, number1, number2, number3, number4, number5, number6, number7, number8;
int count = 0;
int second, fourth, sixth, eighth;
System.out.print("\t\n**********************************");
System.out.print("\t\n**********SIN Validation**********");
System.out.print("\t\n**********************************");
System.out.println("\t\nPlease enter the First sin number: ");
sin = input.nextInt();
count = int.length(sin);
if (count > 8 || count < 8)
System.out.print("Valid: ");
} -
Help with DIgital Output Array with 6062E DAQ CARD...
Good morning, folks... I need some help with digital output of the 6062E PCMCIA card... I can output 1 line without problems... I need to control a 4066 with my digital outputs... I am doing this without greater problems... but there's something... I need that when one of my outputs is high, the others become low, unchangeably... so I tried to use an array to control my output and I couldn't do that... some errors showed up... can you help me please? Maybe there's any errors at my software, then I thank you if you help me... the vi is anexed...
Best Regards...
Attachments:
Untitled 3.vi 20 KBSee below for one of many methods. Change the "lines" string for your setup.
Also, please explore the Examples that ship with LabVIEW, and read your card's manual.
Richard -
Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k
Hello All
I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
System Specs:
motherboard: msi z77a-gd65
cpu: intel 3770k
ram: corsair vengeance 2133mhz 1.5v
psu: corsair 850w
First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
The following are the terms I need help with:
In the my oc genie section;
1. Long duration power limit
2. Long duration maintained
3. Short duration power limit
In the main overclocking section;
4. Digital Compensation level (not in owners manual, options auto/high)
5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
In the CPU Features section;
6. long duration power limit w (does "w" stand for watts?)
7. long duration maintained s (does "s" stand for seconds?)
8. short duration power limit
9. primary plane current limit a (does "a" stand for amps?)
10. secondary plane current limit
11. primary plane turbo power limit
12. secondary plane turbo power
I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.Well I'm back. Been digging around for a few days and found some answers to my questions.
First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
Long duration maintained, I've seen 60 suggested a lot. Why is this?
There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
Any help would be appreciated. Thanks
Maybe you are looking for
-
I can not eject my ipod as the device icon no longer shows up
I can not eject my ipod from Itunes as the device icon no longer shows up in Itunes. I looked on line but none of the solutions were possible to follow as the various options indicated just weren't there!
-
function module for hyperlink
-
Why cant i download itunes on my windows xp :( help please
h
-
Old version Samsung Remote 2.0.1 for iOS 3.1.3 required
Too late, too bad: I purchased a Samsung 5.1 BD-receiver but unfortunately a few weeks before the remote app was updated and requires now iOS 4.2 (before just 3.1.3). Too bad for me and my old 1. gen iPod. Does the app store has a (hidden) feature to
-
Changing user name in osx 10.9
Is there a simple easy way to change a user's name (primary user) ?