Need help with Edge/Origin server configurations

I've been trying now for few days to configure an Edge server that would connect to our working Origin server.
I have not changed anything on the Origin server and media are served properly
I can easily play all media from the videoPlayer.html sample app distributed with the server.
http://10.0.9.19:8134/samples/videoPlayer/videoplayer.html
using the media;
rtmp://10.0.9.19/vod/stories/Test/test
Now I have installed a fresh version of FMS on a second machine and configured the Edge server as follow;
        <Proxy>
                <Mode>remote</Mode>
                <RequestTimeout>5</RequestTimeout>
                <Anonymous>false</Anonymous>
                <CacheDir enabled="true" useAppName="true">
                        <Path>c:\fmscache\</Path>
                        <MaxSize>32</MaxSize>
                </CacheDir>
                <LocalAddress></LocalAddress>
                <RouteTable protocol="">
                        <RouteEntry>*:*;10.0.9.19:*</RouteEntry>
                </RouteTable>
                <EdgeAutoDiscovery>
                        <Enabled>false</Enabled>
                        <AllowOverride>true</AllowOverride>
                        <WaitTime>5000</WaitTime>
                </EdgeAutoDiscovery>
                <AggregateMessages enabled="true">
                </AggregateMessages>
        </Proxy>
Now if I try to connect to rtmp://10.0.9.20/vod/stories/Test/test i simply get an error saying that it cannot connect to the network...
I also tried rtmp://10.0.9.20/?rtmp://10.0.9.19/vod/stories/Test/test
That is using the videoPlayer.html sample and/or our app.
What I am doing wrong?

Ok, it seem that I just found something;
If I launch the browser on the same machine as the edge and use "localhost" instead of IP it works.
So
http://localhost:8134/samples/videoPlayer/videoplayer.html?source=rtmp://localhost/vod/sto ries/Test/test
works while
http://localhost:8134/samples/videoPlayer/videoplayer.html?source=rtmp://10.0.9.19/vod/sto ries/Test/test
don't!
So there must be a config I am missing to tell the Edge to listen on ALL IP...
ok, that is all good if the browser is ran from the same machine as the Edge server but still not working if the browser is launched from my desktop
Message was edited by: André Couture

Similar Messages

  • Need help with Flash media server

    I am using XAMPP. Now i want to intall Flash media server. How can i configure my apache server to work with flash media server? I dont want to install the apache server coming along with flash media

    Hi,
    What excactly is the usecase you are trying here? Are using your external Apache to proxy your http traffic from FMS to it or do you want to use http streaming feature of FMS?
    If you want to proxy it then use the following document : http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WSE2A5A7B9-E118-496f-92F9-E295 038DB7DB.html
    Refer Configure HTTP proxying topic in the document.

  • Need help with BB Internet Server/Upgrades for 8530

    Looking for APPS&Software to download BBInternet Server,RIM BBSLA for the latest version of UPGRADES! My BB8530 Lost my original BBEnterprise Server when I did the upgrades , Now have no INTERNET BROWSER!!!! HELP PLEASE!Need my WEB BROWSER BACK! Everything was working GREAT before I did the UPGRADES SPRINT&BLACKBERRY kept texting & emailing me to do!! Wish I had not done them,now! How do I go back to original?Can't tell anything got better,just messed up my Browser!!!!HELP !

    Firstly, this is a self-help forum for ordinary BB owners to find and provide answers. We aint paid AND WE DONT EXPECT TO BE SHOUTED AT
    As with all forums, you cant expect everyone to be logged-in all the time. Some have more time than others and the majority only visit because they have a problem.
    That said, I'll have a look see if I can help.
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Need help with updating Name Server update for home webserver

    I set up a webserver at home to run my own domain/website. I am able to type my IP address into Safari/IE and get to my website fine. I now need to update the NameServer with the previous domain hosting service, but I have no idea how to find out the NameServer (Compast is my ISP) to put into the UPDATE NAME SERVERS form for the previous hosting company. I need to obviosly do this before people who type in my web address can be directed to my home server instead of the old hsoting company. The previous hosting server is ns.teammediaonline and ns1.teammediaonline.com. Do I use something like ns.comcast.net or something? I already have the IP address and know it works fine. Comcast does notchange the IP's too often and I will not have much traffic to my site, so I should not have any issues with them. I am sure this is a very simple issue. Any help would be greatly appreciated.

    Hi--
    You definitely do not want to contact Comcast. Servers are forbidden to their residential customers. If you contacted them, not only would they refuse to help, that might put you on a list to watch in case you do set one up. Now, if you're careful, don't server out a lot of traffic, and aren't a general nuisance to the people on your node, they most likely won't notice if you don't contact them.
    However, you'll need to look into a different DNS solution. Do a search for "Dynamic DNS" and you'll find a number of services that will be able to help you out. This one, DynDNS, has some reading material that might help to explain what you need to do...
    charlie

  • Need help with MS SQL server JDBC driver

    Anyone has experience getting ACS working with SQL2005? We keep getting ‘com.adobe.adept.persist.DatabaseException: java.sql.SQLException: No suitable driver’
    We’re using sqljdbc.jar and sqljdbc4.jar that downloaded from Microsoft website. We added this to every library folder under tomcat, JRE and SDK but it did not help. Any suggestion will be helpful.
    Thanks-

    Hi,
    We have ACS with SQL Server 2005 Std correctly working.
    We have this settings:
    ############ SQL Server Connection ############
    com.adobe.adept.persist.sql.driverClass=com.microsoft.sqlserver.jdbc.SQLServerDriver
    com.adobe.adept.persist.sql.connection=jdbc:sqlserver://ip-addressSQL:PortSQL;databaseName =Adept
    com.adobe.adept.persist.sql.dialect=microsoft
    com.adobe.adept.persist.sql.user=userSQL
    com.adobe.adept.persist.sql.password=passSQL
    Wi use Microsoft SQL Server JDBC Driver 3.0 downloaded from Microsoft website (http://www.microsoft.com/download/en/details.aspx?id=21599)
    Good luck,

  • I need help with my iTunes audio configuration, its been giving me error messages for 3 weeks now!!!!

    I have been receiving this message for 3 weeks now," iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I've tried uninstalling and even deleting my quicktime player and then installing it again. I've also tried uninstalling and deleting my itunes and then redownloading it again. I have also made sure that both are up to date, but still it gives me that **** error message. I cant listen to any of my songs or any new songs, please help.

    I have been receiving this message for 3 weeks now," iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I've tried uninstalling and even deleting my quicktime player and then installing it again. I've also tried uninstalling and deleting my itunes and then redownloading it again. I have also made sure that both are up to date, but still it gives me that **** error message. I cant listen to any of my songs or any new songs, please help.

  • JMF: Need help with audio INPUT DEVICE CONFIGURATION!!

    i am able to establish a connection between 2 PCs in a LAN but cannot get the microphone to send audio to the other PC ... please help me with the code.
    private void initMicrophone()
    // i think the problem is with this line below, where it searches
    // for a device that does LINEAR encoding with the specified
    // SampleRate and SizeinBits in MONO format!!
    AudioFormat format = new AudioFormat("LINEAR", 8000, 8, 1);
    Vector devices = CaptureDeviceManager.getDeviceList(format);
    CaptureDeviceInfo di = null;
    if(devices.size() > 0)
    di = (CaptureDeviceInfo)devices.elementAt(0);
    else
    System.out.println("No devices found");
    System.exit(-1);
    lc = di.getLocator();
    would also provide the code of the full application ...if you can help me regarding that! thanx!
    i think the code of the whole application is running just fine ...the problem is as specified in the code sample provided!! ...if u still think that u need to have a look at my code ...please let me know! ..thanx so much!!

    sorry about posting this message twice!

  • Need help with audio input device configuration!!

    I am able to establish a connection between 2 PCs in a LAN but cannot get the microphone to send audio to the other PC ... please help me with the code.
    private void initMicrophone()
    // i think the problem is with this line below, where it searches
    // for a device that does LINEAR encoding with the specified
    // SampleRate and SizeinBits in MONO format!!
    AudioFormat format = new AudioFormat("LINEAR", 8000, 8, 1);
    Vector devices = CaptureDeviceManager.getDeviceList(format);
    CaptureDeviceInfo di = null;
    if(devices.size() > 0)
    di = (CaptureDeviceInfo)devices.elementAt(0);
    else
    System.out.println("No devices found");
    System.exit(-1);
    lc = di.getLocator();
    would also provide the code of the full application ...if you can help me regarding that! thanx!

    i think the code of the whole application is running just fine ...the problem is as specified in the code sample provided!! ...if u still think that u need to have a look at my code ...please let me know! ..thanx so much!!

  • Need Help with Industrial Telnet Server

    Hi All,
    I'm trying to use ADF Telnet features. But I have some question about it.
    1. How can we set the ITS password? I can find its setting on the xml.
    2. Can we set the ITS service with a list of allowed IP or MAC? or maybe you can give me another option to secure its service. Cause as I know, telnet is not secure.
    Thanx in Advance,
    Andre

    >is there a way to rest it so i can type in my new password?
    Your username and password are stored in your keychain. You can remove the key from the keychain and the next time you connect you'll be asked to authenticate again.
    Open /Applications/Utilities/Keychain Access, find the relevant key (sorted by server name) and delete it.
    >i cant place any files ont the server. it says that it is read only. how can i change it to read and write?
    If you're usin the Finder as your FTP client, you can't. The Finder only supports read-only FTP. To upload files to a FTP server you need to use some other client.

  • Need help with iPlanet App Server Install

    We have the Fast Track edition installed as webserver on an NT box. We
    have also loaded the Test Drive edition application server and we are
    trying to verify its installation. I have the IP and port number and
    then put in the /ias-samples/index.html and keep getting message Invalid
    URL.
    Checked for the directory existance and it is there. Does it need to be
    mapped somehow?
    What are we missing?
    Thanks In Advance ~

    Hi Tom,
    I don't know what is Fast Track edition of web server. Would you give
    the
    webserver name and version number (such as iWS 4.1 service pack6). It
    may be the case that iAS does not support the iWS. Check if the web
    server is running fine by typing only the ip address. No port number is
    neccessary for NT. You can try with no port number.
    <machine name>.<domain name>/ias-samples/index.html
    regds
    iAS devsupport
    visiontechdesigns wrote:
    >
    We have the Fast Track edition installed as webserver on an NT box. We
    have also loaded the Test Drive edition application server and we are
    trying to verify its installation. I have the IP and port number and
    then put in the /ias-samples/index.html and keep getting message Invalid
    URL.
    Checked for the directory existance and it is there. Does it need to be
    mapped somehow?
    What are we missing?
    Thanks In Advance ~

  • Need help with possible dual listener configuration and listener traffic

    Hello:
    We seperate our network traffic to the database servers using VLAN's. We have application traffic on 192.168.1.x and replication/admin traffic on 10.112.28.x. We are looking to configure 2 listeners for the database, one to listen and respond on 192.168.1.x and one to listen and respond on 10.112.28.x. Right now, we have one listener that is configured for both networks, however, for servers that are connected to both networks, the client sends on 192.168.1 but receives a TNS redirect to 10.112.28. For clients only on the 192.168.1, the TNS redirect to 10.112.28 times out because the client cannot resolve the address. I can make available a Visio diagram of our current configuration. We also utilize server-side load balancing.
    Here is our dilemma, confirmed by analyzing packet traffic to and from the database on a Fluke:
    1) For servers in our environment that reside on BOTH network segments (multihomed), application "traffic" generated on 192.168.1.x arrives at the listener. Through server-side load balancing, a TNS redirect string is returned to the client, which, based on the following listener configuration, redirects the connection to the 10.112.28.x segment:
    LISTENER_RMLNDB01 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.112.28.8)(PORT = 1521)(IP = FIRST))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.8)(PORT = 1529)(IP = FIRST))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    2) For servers that reside on only one network (ex. 192.168.1.x), when the redirect is returned to that server, it experiences a timeout and connection failure because it cannot physically reach 10.112.28.x
    Is there any way, through tnsnames, splitting listener.ora, VLAN's, the database itself, anything, for us to have requests for 192.168.1 be returned on 192.168.1 and not redirected. Would client side load balancing be a better option? Any way to manipulate the service registrations?
    Thanks for all future responses!
    Paul

    Hello:
    We seperate our network traffic to the database servers using VLAN's. We have application traffic on 192.168.1.x and replication/admin traffic on 10.112.28.x. We are looking to configure 2 listeners for the database, one to listen and respond on 192.168.1.x and one to listen and respond on 10.112.28.x. Right now, we have one listener that is configured for both networks, however, for servers that are connected to both networks, the client sends on 192.168.1 but receives a TNS redirect to 10.112.28. For clients only on the 192.168.1, the TNS redirect to 10.112.28 times out because the client cannot resolve the address. I can make available a Visio diagram of our current configuration. We also utilize server-side load balancing.
    Here is our dilemma, confirmed by analyzing packet traffic to and from the database on a Fluke:
    1) For servers in our environment that reside on BOTH network segments (multihomed), application "traffic" generated on 192.168.1.x arrives at the listener. Through server-side load balancing, a TNS redirect string is returned to the client, which, based on the following listener configuration, redirects the connection to the 10.112.28.x segment:
    LISTENER_RMLNDB01 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.112.28.8)(PORT = 1521)(IP = FIRST))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.8)(PORT = 1529)(IP = FIRST))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    2) For servers that reside on only one network (ex. 192.168.1.x), when the redirect is returned to that server, it experiences a timeout and connection failure because it cannot physically reach 10.112.28.x
    Is there any way, through tnsnames, splitting listener.ora, VLAN's, the database itself, anything, for us to have requests for 192.168.1 be returned on 192.168.1 and not redirected. Would client side load balancing be a better option? Any way to manipulate the service registrations?
    Thanks for all future responses!
    Paul

  • Need help with Constribute Publishing Server

    I was asked by Technical Support to make a post on these
    forums.
    I've run in the same problem as
    This
    individual. I cannot deploy dependent files. from my staging to
    my live/production environment. Both are linux servers (case
    sensitive file systems)
    In that thread, they have mentioned there is a bug in the
    simple file deployment service.
    Would really love to have the engineering team fix the bug,
    and send a patch.
    Please help! Thanks!

    Hi
    I posted this some time back. Specifically with Linux systems.
    Get your Hex editor out and look for the case of th eletter "D" in the word "Dependencies"
    http://forums.adobe.com/thread/70915?tstart=60
    If you edit the file right it works 100%.
    Good luck.
    Here is my edited file if you want to use it. That is the only change I made.

  • Need help with HTTPS Client/Server

    Hi i really dont know much about this topic and i was wondering if any 1 knows where to find a good example program to set up a
    HTTPS Server/Client or at least how to implemnt a HTTPS Client.
    thanks in advance

    URL.openConnection works fine as a client. You don't have to do anything other than specify the protocol as https.
    I don't know what you are looking for in terms of server. Are you trying to write your own server? Which part do you not know? The HTTP part or the S part?

  • I need help with Mavericks Server: an error occurred while configuring your server.  I

    I need help with Mavricks Server, I get the following: an error occurred while configuring your server.  I have deleted the Server.app several times along with the associated com.apple and Server folder.  Any more help would be appreciated.

    There are usually some log files around, related to the installation.  See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.

  • NEED HELP WITH WORKFLOW CONFIGURATION

    I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tell me what I need to do to get these requirements fulfilled.
    1)  Description:
    This is a workflow requirement to serve as a reminder of upcoming investment
    maturities.
    Requirements Details:
    Create a workflow to serve as a reminder of upcoming investment maturities.
    Donor System Processing Narrative:
    Read the maturity dates on investments.
    Target System Processing Narrative:
    Send a notice to the parties that an investment will be maturing soon.
    2)  Description:
    Implement workflow to route invoice receipts using a one time vendor for management
    review and posting
    Desired Functionality:
    If a one time vendor is entered by the AP Voucher Clerk the invoice will be automatically
    parked by the program and a workflow notification triggered to the Accounting
    Supervisor and Accounting Manager (backup). The Accounting Supervisor will review
    the parked document and imaged copy of the actual invoice and post the parked
    document.
    3)  Description:
    An approval workflow is needed for credit memos posted to SAP customer accounts.
    Desired Functionality:
    The Cash Journal Clerk will post a credit memo to the customer account using transaction
    FV75 Park Customer Invoice. This transaction will automatically trigger a workflow to
    the Accounting Manager for approval and then to the CFO who will approve and post the
    parked document. (In order for this transaction to automatically trigger what configuration needs to be done).

    Bob;
    You can borrow the example code that ships with both NI-DAQ (in case you are doing NI-DAQ function calls) and Labview. The best examples to start with are the ones that have the prefix STC.
    Hope this helps.
    Filipe A.
    Applications Engineer
    National Instruments

Maybe you are looking for