Need help with error -50!!!!!!! getting it since last week!

i keep having an error showing up when im trying to connect to the itunes store from my computer.
the error is
We could not complete your iTunes Store request. An unknown error occured (-50).
There was an error in the iTunes Store.
Please try again later.
i have been getting this message since last week.
does it have something to do with day lights saving time?
Message was edited by: mrznehabieber14

Hi Try this, i was having the same problem and doing the following worked for me" i cant take the credit i found this in another forum posted by MIKEFILA, but i know what you going thru was so stressed.
I just read someone's suggestion to access Parental Controls under Preferences. Choose to disable the Store and then iTunes U. Update and then voila! The iTunes U appears; even though you just "disabled" it. Next go back into Preferences/Parental Controls and "re-enable" the Store... Good Luck!

Similar Messages

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Need help with error: No bootable device -- insert boot disk and press any key

Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
If needed more clarifications ask me.
Thank you,
Jkmano

if you got into the bios/uefi and have determined that the hdd is being detected then that is good. At least the hdd is operating to some extent, although still may be corrupt OS or the like.
Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.). I see that English is not your native language so we'll just have to work with that as best we can.
Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they?
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Need help with error code 150:30

need help with finding out what error code 150:30 is and how to fix it

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error: XML parser failed: Error An exception occurred! Type:......

Need help with the following error.....what does it mean....28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at 28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>. 28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.Any help would be greatly appreciated. It's something to do with my datasource and possibly the codepage but I'm really not sure.-m 

please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.

Need help with Java always get error

hey guys need help
this the problem i get :
I go to certain websites and I get this error with firefox.
This Site requires that JavaScript be enabled.
It is enabled.
This is the one of the errors in java script console with firefox.
Error: [Exception... "'Component does not have requested interface' when calling method: [nsIInterfaceRequestor::getInterface]" nsresult: "0x80004002 (NS_NOINTERFACE)" location: "<unknown>" data: no]
I have installed the java script from there home site and did a test and says everything is fine. Any ideas?
please help

Hi 49ers,
Sorry not to have any real idea of how to help you out here, but this is a Java forum, not JavaScript.
Some Firefox expert may stumble across your post and be able to offer some advice (I hope they do) but this isn't really the best place to post such questions.
Try here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3
Good luck!
Chris.

Need help with error

Need help figuing out why I'm getting the following error
message trying to launch a training CBT and what to do to fix
it...?
Adobe Flash Player Security
Adobe Flash Player has stopped a potentialy unsafe operation.
Teh follwoing local application on your computer or netwrok:
X:\XXXXXX\XXXXXX....\XXXXX
is trying to communicate with this Internet-enabled location:
X:\XXXXXX\XXXXXX....\XXXXX
To let this application communicate with the Internet, click
Settings,
You must restart the application after changing your
settings.

<itunes:category text="TV & Film">
<itunes:category text="TV & Film/></div>
The two lines I've quoted above should be replaced with:
<itunes:category text="TV & Film" />
The "TV & Film" category has no subcategories so should be closed on it's own. See the example feed at http://www.apple.com/itunes/store/podcaststechspecs.html#_Toc526931673 which uses the TV & Film category.
Hope this helps,
Greg

Do you need help with error code 1004

The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore process

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error code 1714!!!!!!!!!!! Please help

Need help trying to upgrade itunes for windows, i get to a certain point and the following error comes up "ERROR 1714: THE OLD VERSION OF ITUNES CANNOT BE REMOVED CONTACT YOUR TECHNICAL SUPPORT GROUP" i click ok and then another error comes up "ERROR 1603 FATAL ERROR" can anybody help Please!!!!!!!!!!!!!!!!!!!!

hi wags!
hmmmm. okay, let's try using the complete uninstallation instructions from the following document to remove your existing itunes and QT:
Trouble installing iPod, iTunes, or QuickTime software in Windows
if you do that first, will the new itunes install go through properly?
if you get an error message on the uninstalls, let us know what it says. include error message numbers if you're getting any.
love, b

I need help with error ORA-06502: numeric or value error

Hi, all, i need help finding the error here, im getting a numeric or value error when i add information to the variable vlcadena when vlcadena is a clob type, and i check the length of the vlcadena variable and sometimes makes the error at 8000 characters some other times 32k i have no idea whats happening, does anyone have a clue?
PROCEDURE REGISTRO_551 (
VPNUMPARTE IN PARTESC.NUMPARTE%TYPE,
VPFRACCION IN IMPOMAT.FRACCIONMEXIMPO%TYPE,
VPDESCRIPCION IN PARTESC.DESCESPANOL%TYPE,
VPVALORDLS IN IMPOMAT.VALORDOLARES%TYPE,
VPCANTIDAD IN IMPOMAT.CANTIDAD%TYPE,
VPUNIMED IN PARTESC.UNIMEDPARTE%TYPE,
VPCANTIDADTARIFA IN IMPOMAT.CANTIDAD%TYPE,
VPVALORAGREGADO IN EXPOPT.VALORAGREGADO%TYPE,
VPPAISORIGEN IN PARTESC.PAISORIGEN%TYPE,
VPCOMPVEND IN PARTESC.PAISORIGEN%TYPE,
VPTIPOFRACCION IN IMPOMAT.TIPOFRACCION%TYPE,
VPPESONETO IN IMPOMAT.PESONETO%TYPE,
VPTIPOMONEDA IN MIMPOMAT.TIPOMONEDAEXTRANJERA%TYPE
) AS
BEGIN
    vgproceso := 207310;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||'551'||'|'; --1. TIPO DE REGISTRO
    vgproceso := 207311;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPFRACCION||'|'; --2. FRACCION
    vgproceso := 207312;
    vllong2:=length(vlCadena);
    QUITA_ENTERS(NVL(VPDESCRIPCION,' '),VLTEMP);
    IF LENGTH(VLTEMP)>80 THEN
        VLTEMP:=SUBSTR(VLTEMP,1,80);
    END IF;
    vgproceso := 207313;
    vllong2:=length(vlCadena);
    IF VLTEMP IS NULL THEN
        vlCadena:=vlCadena||'|'; --3. DESCRIPCION
    ELSE
        vlCadena:=vlCadena||VLTEMP||'|'; --3. DESCRIPCION
    END IF;
    vgproceso := 207314;
    vllong2:=length(vlCadena);
    IF VPNUMPARTE IS NULL THEN
        vlCadena:=vlCadena||'|';--4. NO. DE PARTE
    ELSE
        vlCadena:=vlCadena||VPNUMPARTE||'|';--4. NO. DE PARTE
    END IF;
    vgproceso := 207315;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPVALORDLS||'|'; --5. VALOR MERCANCIA
    vgproceso := 207316;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPCANTIDAD||'|'; --6. CANTIDAD COMERCIAL
    vgproceso := 207317;
    vllong2:=length(vlCadena);
    IF VPUNIMED IS NULL THEN
        VPDESCERROR:='ALGUNA PARTIDA CON FRACCION '||VPFRACCION||' NO TIENE UNIDAD DE MEDIDA';
    END IF;
    vgproceso := 207320;
    GET_CATGRAL('ADUANAS','UNIMED',NVL(VPUNIMED,' '),CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
    IF CL_V2=0 THEN
       vlCadena:=vlCadena||VPUNIMED||'|'; --7. UNIDAD MEDIDA COMERCIAL
    ELSE
        SELECT TO_CHAR(TRUNC(CL_V2)) INTO VLUMCOMERCIAL FROM DUAL;
        IF LENGTH(VLUMCOMERCIAL)=1 THEN
            VLUMCOMERCIAL:='0'||VLUMCOMERCIAL;
        END IF;
        vlCadena:=vlCadena||VLUMCOMERCIAL||'|'; --7. UNIDAD MEDIDA COMERCIAL
    END IF;
    vlCadena:=vlCadena||VPCANTIDADTARIFA||'|';--8. CANTIDAD TARIFA
    vlCadena:=vlCadena||VPVALORAGREGADO||'|';--9. VALOR AGREGADO
    GET_CATGRAL('ADUANAS','CONFADU','IVIN-REG',CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
    vlCadena:=vlCadena||CL_D1||'|'; --10. VINCULACION
    vlCadena:=vlCadena||CL_D2||'|'; --11. METODO DE VALORACION
    vlCadena:=vlCadena||'|'; --12. MARCA
    vlCadena:=vlCadena||'|'; --13. MODELO

If the expected maximum length of the concatenated string is less than 32K, then use VARCHAR2 and at the end convert to CLOB if necesary.
:p
PS: At what line in the code does it give the error?
Edited by: LKBrwn_DBA on Aug 20, 2009 2:49 PM

Novice (Ok Rookie) need help with error message

Hello all, I hope that you can help. I am getting this error
message when trying to submit registration information to the
database that I have created.
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] You cannot add or
change a record because a related record is required in table
'UserTypes'.
The error occurred in
C:\CFusionMX7\wwwroot\Development\signup.cfm: line 67
65 : <cfelse>
66 : NULL
67 : </cfif>
68 : , 0
69 : , 1
SQL INSERT INTO C:\CFusionMX7\wwwroot\database\wwf2.Users
(UserName, Password, FirstName, LastName, EmailAddress, Address,
City, "State", ZipCode, "Admin", Allowed, UserTypeId) VALUES (
(param 1) , (param 2) , (param 3) , (param 4) , (param 5) , (param
6) , (param 7) , (param 8) , (param 9) , 0 , 1 , 3 )
DATASOURCE WWF2
VENDORERRORCODE -1613
SQLSTATE 23000
Here is the code for that page
Any help would be much appreciated. Thank you all so much.
Damien

quote:
Originally posted by:
DRufus
When I created the form, I used dreamweavers record insertion
wizard. could this be the issue. I'm sorry if I am not
understanding your solution.
Usage of <cfselect> is explained in the cfml reference
manual. If you don't have one, the internet does. The quickest way
to find it is to google the name of the tag, complete with angle
brackets.
I can't comment on dreamweaver's wizards because I never use
them.

I need help with my phone getting it out of recovery mode

i need help getting my iphone out of recovery mode

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Need help with errors (Queue and Stack)

can someone please help. I am getting these errors and i do not know what's wrong or how to fix them. A snippet from the program is below following is the errors I am getting. Please help. :(
public class test
private Stack opStack;
private Queue postfix;
private StringTokenizer str;
private String curValue;
public void Parser(String s)
opStack = new StackAr();
postfix = new QueueAr();
str = new StringTokenizer(s, "+-/*^() ", true);
opStack.push(new Integer(END));
class QueueAr implements Queue
private Object array[];
private int count, front, back;
static final int DEF_SIZE = 15;
private int increment (int x)
test.java:24: Variable DEF_SIZE can't be static in inner class test. QueueAr. Only members of interfaces and top-level classes can be static.
class QueueAr implements Queue
^
test.java:24: Interface Queue of inner class test. QueueAr not found.
class QueueAr implements Queue
^
test.java:12: Class Queue not found in type declaration.
private Queue postfix;
^
test.java:18: Class StackAr not found in type declaration.
opStack = new StackAr();

test.java:24: Variable DEF_SIZE can't be static in
inner class test. QueueAr. Only members of interfaces
and top-level classes can be static.
class QueueAr implements Queue
^You can't have static members in an inner class. Either Move DEF_SIZE to the outer class, or don't make it static. :-)
test.java:24: Interface Queue of inner class test.
QueueAr not found.
class QueueAr implements Queue
^
test.java:12: Class Queue not found in type
declaration.
private Queue postfix;
^You need to import the Queue class, whatever that is.
test.java:18: Class StackAr not found in type
declaration.
opStack = new StackAr();^
You need to import the StackAr class, whatever that is.

Need help with error on Lion Server (kernel: add_fsevent: unable to get path for vp ..)

I have had some Xsan issues and one of my volumes kept failing. I did a complete hard reboot of the entire system after trying all the cvfsck options. Now the volume seems to be ok but I am now getting the following errors and can not figure out what they are. Any help to a new Admin would be greatly appreciated.
5/7/12 1:59:13.000 PM kernel: add_fsevent: unabled to get a path for vp 0xb129000. dropping the event.
5/7/12 1:59:15.000 PM kernel: add_fsevent: unable to get path for vp 0xb12a4d0 (live.0.indexHead; ret 22; type 4)
5/7/12 1:59:15.000 PM kernel: add_fsevent: unabled to get a path for vp 0xb12a4d0. dropping the event.
5/7/12 1:59:15.000 PM kernel: add_fsevent: unable to get path for vp 0xb129de0 (live.1.indexHead; ret 22; type 4)
5/7/12 1:59:15.000 PM kernel: add_fsevent: unabled to get a path for vp 0xb129de0. dropping the event.
5/7/12 1:59:15.000 PM kernel: add_fsevent: unable to get path for vp 0xe3964d0 (live.2.indexHead; ret 22; type 4)
5/7/12 1:59:15.000 PM kernel: add_fsevent: unabled to get a path for vp 0xe3964d0. dropping the event.
5/7/12 2:01:22.024 PM mdworker32: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
5/7/12 2:01:22.525 PM com.apple.mdworker.pool.0: PSSniffer error: Invalid argument
5/7/12 2:01:24.697 PM mdworker: FontImporter: Validation failed - "/Volumes/Matilda/Dexter/Randy project - Burke update/James E Burke Awards video revision/Past Video files/ETH742/tricyclestudios (After FX) Jeremy/Assets/FUTURA_4.TTF".
5/7/12 2:01:24.697 PM mdworker: FontImporter: Validation Result - "(
kATSFontTestSeverityFatalError
Then I got a few more of the errors like the top lines.
Please help!!
Thanks,
Kevin Rosenthal

Turns out there were disk issues that I repaired by rebooting into Lion Recovery Mode (restart, hold Command-R during startup) and running Disk Utility. Disk Utility reported:
Volume bitmap needs minor repair for orphaned blocks
Invalid volume free block count
It fixed both problems and the drive then verified clean.
While I was there, I also repaired permissions, though I doubt that the permission oddities were the cause of the errors.
After rebooting into normal Lion, two things happend:
Time Machine quite happily went back to work and took a backup, no issue. Several hourlies have run since then, no problems.
Spotlight did some re-indexing. This caused some hangs (spinning beachballs) at first, but it self-cleared. It definitely didn't last long enough to re-index the entire drive; I'm guessing that it needed to re-index some of the repaired sections.
So far as I know, no files were corrupted -- but the drive is about 80% free space, so odds are that the orphaned blocks were not in a critical area.

Need help with error -50!!!!!!! getting it since last week!

Similar Messages

Maybe you are looking for