Need help with error please!

addRecord(java.lang.String,java.lang.String) in CatDriver cannot be applied to (java.lang.String,int) addRecord(correctName, correctAge);

The message means that the addRecord() method was defined to receive two String arguments, but the code you are compiling is trying to pass a String and an int. correctAge must be the int. You either need to re-design or overload the addRecord() method or change correctAge into a String.

Similar Messages

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

I have need help with something Please respond Quickly :)

I have need help with something Please respond Quickly ok so i have the linksys wrt54g Version 2.2 and i upgraded the firmware to V4.21.4 from this site http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G and i clicked V2.2 for the router. So after i upgraded i lost internet ability i can't use the internet so i had to downgrade back to V4.21.1 but i want the things that newer update sloves. Please Help. Everything thing says DNS error? aka Modem.
$$Cgibbons$$

Ya i tried that i tried restoring and redoing everything when i downgrade back to .1 it works fine though?
$$Cgibbons$$

Need help with error: No bootable device -- insert boot disk and press any key

Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
If needed more clarifications ask me.
Thank you,
Jkmano

if you got into the bios/uefi and have determined that the hdd is being detected then that is good. At least the hdd is operating to some extent, although still may be corrupt OS or the like.
Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.). I see that English is not your native language so we'll just have to work with that as best we can.
Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they?
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Need help with error: XML parser failed: Error An exception occurred! Type:......

Need help with the following error.....what does it mean....28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at 28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>. 28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.Any help would be greatly appreciated. It's something to do with my datasource and possibly the codepage but I'm really not sure.-m 

please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.

Need help with error code 150:30

need help with finding out what error code 150:30 is and how to fix it

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error code 1714!!!!!!!!!!! Please help

Need help trying to upgrade itunes for windows, i get to a certain point and the following error comes up "ERROR 1714: THE OLD VERSION OF ITUNES CANNOT BE REMOVED CONTACT YOUR TECHNICAL SUPPORT GROUP" i click ok and then another error comes up "ERROR 1603 FATAL ERROR" can anybody help Please!!!!!!!!!!!!!!!!!!!!

hi wags!
hmmmm. okay, let's try using the complete uninstallation instructions from the following document to remove your existing itunes and QT:
Trouble installing iPod, iTunes, or QuickTime software in Windows
if you do that first, will the new itunes install go through properly?
if you get an error message on the uninstalls, let us know what it says. include error message numbers if you're getting any.
love, b

TS1424 need help with error (0x80092013) windows, very frustrated...please help.

Very frustrated music lover but cant even sign in to my account without various errors occurring. ...the most recent onevhappened today...it seems Apple cant help me so please if anyone out there can I would be very greatful.

I am getting similar error... I check stuff you guys mention earlier... and I am still getting and error..
NewOrder class just have bunch of method get and set..
public class NewOrder
String customer_name;
int customer_number;
int quantity_order;
int unit_price;
*Get Methods.
public String getcustomer_name()
return customer_name;
public int getcustomer_number()
return customer_number;
public int getquantity_order()
return quantity_order;
public int getunit_price()
return unit_price;
* Set methods.
public String setcustomer_name(String name)
customer_name=name;
return customer_name;
public void setcustomer_number(int num)
customer_number=num;
public void setquantity_order(int quantity)
quantity_order=quantity;
public void setunit_price(int price)
unit_price=price;
public class NewHandlingShipping extends NewOrder
int quantityorder=10;
int id=001;
String myName="ABC Company";
int cost=10;
int ship=4;
public class handling
NewHandlingShipping cust_name = new NewHandlingShipping();
NewHandlingShipping cus_id = new NewHandlingShipping();
NewHandlingShipping quantity = new NewHandlingShipping();
NewHandlingShipping item_price = new NewHandlingShipping();
cust_name.setcustomer_name(myName);
cust_id.setcustomer_number(id);
item_price.setunit_price(ship);
quantity.setquantity_order(quantityorder);
ship=4+cost;
System.out.println("Your Order is $ " + ship);
Getting and error on the bold stuff..
error output...
NewHandlingShipping.java:22: <identifier> expected
System.out.println("Your Order is $ " + ship);
- Please Help..

Do you need help with error code 1004

The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore process

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error

Need help figuing out why I'm getting the following error
message trying to launch a training CBT and what to do to fix
it...?
Adobe Flash Player Security
Adobe Flash Player has stopped a potentialy unsafe operation.
Teh follwoing local application on your computer or netwrok:
X:\XXXXXX\XXXXXX....\XXXXX
is trying to communicate with this Internet-enabled location:
X:\XXXXXX\XXXXXX....\XXXXX
To let this application communicate with the Internet, click
Settings,
You must restart the application after changing your
settings.

<itunes:category text="TV & Film">
<itunes:category text="TV & Film/></div>
The two lines I've quoted above should be replaced with:
<itunes:category text="TV & Film" />
The "TV & Film" category has no subcategories so should be closed on it's own. See the example feed at http://www.apple.com/itunes/store/podcaststechspecs.html#_Toc526931673 which uses the TV & Film category.
Hope this helps,
Greg

Need help with Fancybox please

Hola
I need some help with Fancybox.
I bought this template and it came without facybox, so I thought
that this will be a great help to learn some about jQuerry, but I'm lost
Why is NOT working on my page?
I just cannot figure this out.
Can you please check my page?
http://tummytime.biz/pages/portfolio_fancy.html
I got Windows 8, Dreamweaver CC
Thanks a lot.

There are a couple things that could be causing a couple browsers' collective heads to implode.
Remove the <! right before your </head> tag...
</script>
<!
</head>
<body>
You have two calls to the fancybox css file, you only need one.
Aside from that I'm not seeing any code problems jump out at me.
EDIT: Ah, didn't scroll far enough. You have more than one reference to the jquery library. Typically, only one is needed and two or more will cause them all to fail. Usually, you can use the "latest" link and cover all your bases.
If you aren't using those referenced scripts at the bottom of your page, delete them.

Need Help With Home Please

If anyone here is good with Java, I need serious help with my homework, please give me your instant messenger screen name and we can chat, thanks alot!!
Angela

I don't understand how people get themselves into
these situations as school, if you don't want to learn
it don't sign up for the class.....You never got yourself into this situation.... I think everyone has on occassion.
My very first "serious" university program was to solve a second order, non-linear differential equation using the Runge-Kutta method. This is NOT the easy way to learn a computer language and I have to admit I did take "shortcuts" using more experienced people than me.
That was before the web though...
God am I really that old?

I need help with this please

javax.servlet.ServletException
at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:595)
at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:537)
at jsp.addservice._jspService(addservice.jsp:515)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:847)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:229)
at mil.usmc.m4l.servlets.M4LServlet.forward(M4LServlet.java:34)
at mil.usmc.m4l.servlets.EditService.doGet(EditService.java:120)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at mil.usmc.m4l.filters.M4LCMSFilter.doFilter(M4LCMSFilter.java:150)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:673)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Edited by: user11237193 on Apr 27, 2010 10:58 AM
I am getting error and I ned help with it Thank you for your help.

I'd enter the dell service tags in here to find out what OS the pc was designed for.
http://www.dell.com/support/contents/us/en/19/Category/Product-Support/Self-support-Knowledgebase/locate-service-tag?~ck=mn
For windows I'd ask over here.
http://answers.microsoft.com/en-us/windows
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Help with Errors please!

Hi, I'm building a Flash website.
I've used frames with names to contain the different 'pages'
of the site. On the frame called 'SVHS1' I've built an XML mp3
player with buttons and a volume slider.
I'm having a couple of problems with this section of the
site.
Firstly: when I 'test movie' and navigate to the mp3 player
section it all works fine, the mp3s load correctly, the playback
controls work fine, and the volume slider does what it's supposed
to do. But if I've used the volume slider to adjust the volume (and
only then) and then navigate to the next frame 'SVHS2' (or any
frames that are later in the main timeline) I get multiple
occurrences of the following error in the output pane:
TypeError: Error #1009: Cannot access a property or method
of a null object reference.
At PSPWebsite1_fla::MainTimeline/adjustVolume()
I understand (from reading other posts/help etc.) in
principle what is causing this, but my knowledge of AS3 is too
limited to know exactly what is wrong with my script or how to fix
it.
Secondly: if I press the stop button on my mp3 player and
then navigate to another frame (any frame before or after
‘SVHS1’) the site works fine, and the mp3 player works
perfectly if I go to that frame again. But if I navigate to another
frame without first stopping the song it continues to play even
though I’m not on the mp3 player frame, and if I go back to
the mp3 player before the song has finished it starts playing
automatically from the beginning of the first song in the XML list
again and simply doubles up the sound, which is horrible. When this
happens the playback controls only affect the 2nd version
(understandably).
I think this is probably quite simple to fix, assuming that I
have to write some script that tells the mp3 player to stop playing
if/when the user navigates away from that frame...but I don’t
know how to do this.
Any help with either of the above would be much appreciated.
The attached script is for the mp3 player frame.

You can consider the trace function as being a "can you hear
me now" helper (instead of an annoying tv commercial gimmick). It
displays whatever it's told to in the same output window that you
see that error message come up in. There are two ways I'll usually
use it.
I'll often end up simply using a trace("here"); as a means of
seeing where a process is getting hung up. I gradually move that
line of code thru what I know to be the step by step sequence of
the code until "here" no longer shows up. It normally indicates
that the preceding line of code is where the ball got dropped.
In AS3, which is often a little more helpful when it trips on
something, such as the error message you received which tells you
there's a problem in the adjustVolume function, you can use it to
see what element in that function is either undefined or out of
scope.
Place... trace(vol); ... just after the first line of code in
that function to see if vol is a number. If it is, then you know
that line is okay and you can move on to check the next line. If it
isn't a number, then move the trace before that line and change it
to... trace(volume_mc.slider_mc.x); ... and see if it is a value.
If it isn't, then change the trace to check to see what
trace(volume_mc); results in.... so on and so on.
It's basically a process of working your way thru code to
narrow down what piece is the undefined/out-of-scope (or a syntax
error) element that is causing the problem.

I need help with error ORA-06502: numeric or value error

Hi, all, i need help finding the error here, im getting a numeric or value error when i add information to the variable vlcadena when vlcadena is a clob type, and i check the length of the vlcadena variable and sometimes makes the error at 8000 characters some other times 32k i have no idea whats happening, does anyone have a clue?
PROCEDURE REGISTRO_551 (
VPNUMPARTE IN PARTESC.NUMPARTE%TYPE,
VPFRACCION IN IMPOMAT.FRACCIONMEXIMPO%TYPE,
VPDESCRIPCION IN PARTESC.DESCESPANOL%TYPE,
VPVALORDLS IN IMPOMAT.VALORDOLARES%TYPE,
VPCANTIDAD IN IMPOMAT.CANTIDAD%TYPE,
VPUNIMED IN PARTESC.UNIMEDPARTE%TYPE,
VPCANTIDADTARIFA IN IMPOMAT.CANTIDAD%TYPE,
VPVALORAGREGADO IN EXPOPT.VALORAGREGADO%TYPE,
VPPAISORIGEN IN PARTESC.PAISORIGEN%TYPE,
VPCOMPVEND IN PARTESC.PAISORIGEN%TYPE,
VPTIPOFRACCION IN IMPOMAT.TIPOFRACCION%TYPE,
VPPESONETO IN IMPOMAT.PESONETO%TYPE,
VPTIPOMONEDA IN MIMPOMAT.TIPOMONEDAEXTRANJERA%TYPE
) AS
BEGIN
    vgproceso := 207310;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||'551'||'|'; --1. TIPO DE REGISTRO
    vgproceso := 207311;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPFRACCION||'|'; --2. FRACCION
    vgproceso := 207312;
    vllong2:=length(vlCadena);
    QUITA_ENTERS(NVL(VPDESCRIPCION,' '),VLTEMP);
    IF LENGTH(VLTEMP)>80 THEN
        VLTEMP:=SUBSTR(VLTEMP,1,80);
    END IF;
    vgproceso := 207313;
    vllong2:=length(vlCadena);
    IF VLTEMP IS NULL THEN
        vlCadena:=vlCadena||'|'; --3. DESCRIPCION
    ELSE
        vlCadena:=vlCadena||VLTEMP||'|'; --3. DESCRIPCION
    END IF;
    vgproceso := 207314;
    vllong2:=length(vlCadena);
    IF VPNUMPARTE IS NULL THEN
        vlCadena:=vlCadena||'|';--4. NO. DE PARTE
    ELSE
        vlCadena:=vlCadena||VPNUMPARTE||'|';--4. NO. DE PARTE
    END IF;
    vgproceso := 207315;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPVALORDLS||'|'; --5. VALOR MERCANCIA
    vgproceso := 207316;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPCANTIDAD||'|'; --6. CANTIDAD COMERCIAL
    vgproceso := 207317;
    vllong2:=length(vlCadena);
    IF VPUNIMED IS NULL THEN
        VPDESCERROR:='ALGUNA PARTIDA CON FRACCION '||VPFRACCION||' NO TIENE UNIDAD DE MEDIDA';
    END IF;
    vgproceso := 207320;
    GET_CATGRAL('ADUANAS','UNIMED',NVL(VPUNIMED,' '),CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
    IF CL_V2=0 THEN
       vlCadena:=vlCadena||VPUNIMED||'|'; --7. UNIDAD MEDIDA COMERCIAL
    ELSE
        SELECT TO_CHAR(TRUNC(CL_V2)) INTO VLUMCOMERCIAL FROM DUAL;
        IF LENGTH(VLUMCOMERCIAL)=1 THEN
            VLUMCOMERCIAL:='0'||VLUMCOMERCIAL;
        END IF;
        vlCadena:=vlCadena||VLUMCOMERCIAL||'|'; --7. UNIDAD MEDIDA COMERCIAL
    END IF;
    vlCadena:=vlCadena||VPCANTIDADTARIFA||'|';--8. CANTIDAD TARIFA
    vlCadena:=vlCadena||VPVALORAGREGADO||'|';--9. VALOR AGREGADO
    GET_CATGRAL('ADUANAS','CONFADU','IVIN-REG',CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
    vlCadena:=vlCadena||CL_D1||'|'; --10. VINCULACION
    vlCadena:=vlCadena||CL_D2||'|'; --11. METODO DE VALORACION
    vlCadena:=vlCadena||'|'; --12. MARCA
    vlCadena:=vlCadena||'|'; --13. MODELO

If the expected maximum length of the concatenated string is less than 32K, then use VARCHAR2 and at the end convert to CLOB if necesary.
:p
PS: At what line in the code does it give the error?
Edited by: LKBrwn_DBA on Aug 20, 2009 2:49 PM

Need help with error please!

Similar Messages

Maybe you are looking for