Need Help with Exchange 2003 SP2

Hello,
first of all, i would like to tell you, that i am a german and my english is only quit good.
i bought an iphone and now i would like to use the feature exchange account.
i am able to create the account on my iphone without any trouble but everytime when i go into the "mail" i recieve an error: "E-Mails können nicht empfangen werden. Die Verbindung mit dem Server ist fehlgeschlagen."
i changed every possible settings on my server as well as on my iphone but no i have no more idea.
i installed the needed Certificates on my iphone.
i am in use of iphone 3G Version 2.2 with Exchange Server 2003 SP2
The Protokoll on my Server gives me different mistakes sometimes #3031 and sometimes #3005.
I am happy for every help i will get here.

Hi Johnny,
How about the
https://testconnectivity.microsoft.com/ result that MAS suggested? Please paste the errors without sensitive information for the further troubleshooting.
According to your first post, I know that the only issue now is Mobile cannot connect to Exchange server. Please correct me if there is any misunderstanding.
Please run following command to check whether the ActiveSynce is eanbled on Exchange server:
Get-CASMailbox -Identity testaccount | fl
Please check whether the ActiveSyncEnabled Parameter's value is True. If it is Fals, please run following commant to enable all users' ActiveSync on this Exchange server:
Get-CASMailbox | Set-CASMailbox -ActiveSyncEnalbed $True 
Is there any error message pop up when mobile cannot connect to Exchange server?
Also suggest ask ActiveSync forum for help so that you can get more professional suggestions. For your convenience:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

  • Read/Unread, Replied, & Forwarded status not syncing with Exchange 2003 SP2

    Is there a solution to the email status syncing issue for Microsoft Exchange 2003? It had never work since the day we setup the exchange account on the iphone. Any suggestion is appreciated.
    I posted the above question in May 2009. iOS is now at 4.2.1, I guess Apple has no plan on addressing these. Would it work with the latest Microsoft Exchange?

    Read/Unread worked for me when we were on Exchange 2003, and it continues to work now that we are on 2007. So it's probably an issue in your Exchange server.

  • Need help with Exchange 2010 Spam filter setting

    Hello,
    In Exchange 2010 there is built-in anti spam setting as well as Forefront Protection 2010 for Exchange Server. But this doesn't give privileges to the end user who could access it using any web URL where they could set whitelist/blacklist etc.
    Is there any product in Forefront which we can use for such purpose ?
    Also in Forefront Protection 2010 for Exchange Server if Content Filtering is enable then it reject all emails which have html tag, even if sender have html base signature. This is really confusing any solution for this problem too ?
    thanks

    Hello,
    In my case, I have mostly seen FPE reject messages as spam when there is  alink to say "click here to access <bank web site> and the underlying link is actually to an IP address or to another site that does not match what the link claims to be.
    We have also seen FPE reject messages with an image that is a clickable link.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Need help with Exchange account

    Hi,
    We use Exchange 2007 at work. When I tried to set up my iPhone with it, it worked perfectly, including syncing my work e-mail account, syncing my work calendar and allowing me to look up entries in my work address book.
    When I tried to set it up on my GUEST account on my Mac (completely clean account), it again worked perfectly.
    However, on my main account on the Mac, I'm able to get the e-mail sync. functionality to work and the addressbook functionality to work but for some reason, I just can't get iCal to sync or show my work calendar.
    iCal shows the name of the account in the list of calendars on the left-side pane, but shows an "error" icon (squiggly icon) on the right of the account. No matter what I do, I can't get it to sync with my work calendar.
    Can someone help me please?

    Hi, Natasharocks11, and welcome to the Community,
    I could not detect from your post precisely what the problem with your account is.  Please kindly post back with details as well as any error messages you may be seeing. 
    Thank you,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Require Passcode Immediately with Exchange 2003 and iPhone 3.0?

    Before I upgraded to iPhone 3.0 I was syncing with Exchange 2003 SP2 and I had set my passcode to be required after 1 hour, which was changed from the default of 4 hours. On the Exchange server we have a policy in place to have a max of 12 hours before a passcode is required which works on my WM phones.
    After upgrading to 3.0, the phone now immediately requires a passcode every time I turn it on. I went into the settings to change it to be a little longer, but the only option is to have it Immediately and I have lost all of the other options. Is there a way to get back at least 1 hour or something that reflects the 12 hour setting on my Exchange server?

    I can confirm that you just need to turn OFF Mail, Contacts and Calendar sync within the Exchange account, set the timeout 4 hours (or whatever - it will automatically shrink down if your Exchaange administrator's policy is more restrictive), and then turn back ON Mail, Contacts and Calendar sync.
    Note you'll get a scary warning that says all your Contacts and Calendar data will be deleted from the phone - Outlook users can ignore if you're syncing with Outlook, since it will re-sync when done.

  • Single Inbox on Unity Connection 8.5 and Exchange 2003 SP2

    Hi,
    We have Unity Connection 8.5 (with SU2) and Exchange 2003 SP2
    We want to setup the Single Inbox feature that works well with Exchange 2007 and 2010, but my customer is running Exchange 2003 SP2.
    We met all of the requirements outlined in: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp459928
    I configure a new "Unified Messaging Services" profile for Exchange using Exchange 2003 and enabled for Single Inbox.  When I run "Test" it displays the following errors (other validation is successfully)
    The service port for IMAP is not functioning.      
    The system failed to connect to the server with a socket connection through port beatles.clubone.com:993. The error is error:0200206F:system library:connect:Connection refused. Refer to the tomcat log file for more details. If you are using secure connection, confirm that SSL is enabled on the server.
    Why is it trying to connect using IMAP, that wasn't the case when I used for Exchange 2007 or 2010 when IMAP was not enabled.
    Is there something else I'm missing for configuration with Unity Connection to support Single Inbox with Exchange 2003 SP2?
    Thank you!
    -rya

    Hi Rya,
    I just wanted to add my +5 vote for this great catch by Aaron (nice work "A")
    If you are going to upgrade to Unity Connection 8.6
    Check out this great doc from Saurabh for the refresh upgrade notes to 8.6.
    https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application/blog/2011/08/11/checklist-before-upgrading-to-unity-connection-86
    Cheers!
    Rob
    "Show a little faith, there's magic in the night" - Springsteen

  • Need help with Outlook 2013 connecting to Exchange server(2010)

    Hi
    I need help with Outlook 2013 and with my exchange server(2010) email account
    After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
    However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long.  In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
    and any emails I compose dont work.  I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue  I have also done a TraceRoute and that shows no drops or problems to he exchange server.
    Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
    Look forward to a solution soon
    Thanks

    Hi Angela
    Thanks for your message
    To answer your questions, please note the following
    a) My account is set up in Cache Mode( not online mode)
    b) I am the only other user on the account
    c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
    d) When the connection to the server is there, it shows  connection as "established"
    e) Sorry I dont understand th meaning of CAS array in your environment?  Can you pls explain
    Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account.  So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
    as it has done that in the past on both outlook versions.  The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
    My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results.  I have also changed the profile a few times, but the intermittent connectivity problem hasn't
    been resolved.
    Can you identify the possible causes and more importantly a working permanent solution please
    Thanks
    Mahesh

  • I need help with my i tunes gift card(exchangable) that is damaged.Help please!!

    I need help with my i tunes gift card(exchangable) that is damaged.Help please!!

    iTunes Store: Invalid, inactive, or illegible codes

  • 11004 error SBS Exchange 2003 SP2 with POP connector. Exchange version 6.5 7638.1

    Hello
    I am getting loads of errors displayed in Event Viewer Application log like:-
    Event ID 1035
     A error occurred in connecting to the <xxx.xxxxxx.co.uk> POP3 server for user <[email protected]>. The error is 11004. The server may be down for maintenance
    or your server is not connected to the Internet.
    Event ID 1023
    The downloading process for mailbox <[email protected] [mail.XXXXXXXXXXXXX.co.uk]> was ended with one or more errors.
    The Server has 3GB memory and 64GB free disk space on the parttiion supporting Exchange
    Can anyone suggest a troubleshooting scheme?

    Is this machine running SBS? Is this an error that's logged by the kludgy POP3 connector? If so, that connector isn't part of Exchange -- it's something the SBS folks added. You'll have to ask our question in a SBS forum.
    Keep in mind that a POP3 server will lock the mailbox if the messages are being checked by another client (unlike Exchange which allows multiple POP3 sessions). That would cause those 1035 errors to be logged by Exchange.
    When you combine the 1035 with the 1023 events it looks more like connectivity problems than an Exchange problem. You might want to use a network monitor and see if the connection's being dropped.
    In any case, good luck with Exchange 2003. It's no longer supported -- but I don't think your problem is related to Exchange but to the SBS add-on software.
    --- Rich Matheisen MCSE&I, Exchange MVP

  • Exchange 2003 SP2 messages stuck in queue

    HI
    I just inherited a exchange 2003 SP2 machine and next month we are migrating to 365.  But here is what happen so far and the issue
    1.  The previous IT company had the emails flowing thru smart host via their own hosted spam filter.
    2.  I came in and changed my MX records and installed a on server spam filter (ORF) by Vamsoft and configured it.  Removed the smart host info and made sure that the firewall is all configured properly.
    3.  Tested in bound email.
    4.  Problem.  Out bound emails go thru till the server.  Some users get a delayed email but others do not.  The messages are stuck in the outbound Queue.  restarted the SMTP and still no luck.  Disabled Spam filter (ORF) still
    no luck.  
    Then I looked at anything which is common.
    mails to msn.com & Hotmail.com are stuck.  Emails to my company tejes.com are stuck.  There are other few companies but do not know their email provider but the common theme between these 3 domains all are hosted by Microsoft.  tejes.com
    is on office365.  
    I need help.  Please 
    Anil
    Update: Fixed it.  The previous company had filters in place.  

    HI
    I just inherited a exchange 2003 SP2 machine and next month we are migrating to 365.  But here is what happen so far and the issue
    1.  The previous IT company had the emails flowing thru smart host via their own hosted spam filter.
    2.  I came in and changed my MX records and installed a on server spam filter (ORF) by Vamsoft and configured it.  Removed the smart host info and made sure that the firewall is all configured properly.
    3.  Tested in bound email.
    4.  Problem.  Out bound emails go thru till the server.  Some users get a delayed email but others do not.  The messages are stuck in the outbound Queue.  restarted the SMTP and still no luck.  Disabled Spam filter (ORF) still
    no luck.  
    Then I looked at anything which is common.
    mails to msn.com & Hotmail.com are stuck.  Emails to my company tejes.com are stuck.  There are other few companies but do not know their email provider but the common theme between these 3 domains all are hosted by Microsoft.  tejes.com
    is on office365.  
    I need help.  Please 
    Anil
    Update: Fixed it.  The previous company had filters in place.  
    Hi Anil,
    Glad to know the issue has been fixed.
    Also find this KB for your reference:
    How to configure connection filtering to use Realtime Block Lists (RBLs) and how to configure recipient filtering in Exchange 2003
    http://support.microsoft.com/kb/823866
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Migration; Exchange 2003 SP2 to Exchange 2013 on new Domain and DC

    I wasn't prepared for this task, and it was thrown at me to do...  Eyes are bleeding from planning reading and planning, would LOVE any input from you guys.  First time posting, here and have heard great things about these forums.  The Company
    I work for obtained a new client and a network that is in a cluster at the moment, so I'm having to dig through everything and restructure..
    Scenario:
    Old Domain/Server: (To be decommissioned)
    Server 2003 Standard SP2 (Domain: cosco.com; NETBIOS name: coscoex)
    Exchange 2003 SP2 (6.5.7638.1)
    Server is a domain controller and exchange server.
    Migrating to:
    Server 2012 R2 Datacenter (New Domain ad.cosco.com; NETBIOS name: cosco)
    VM #1: Server 2012 R2 Domain Controller at 2012 R2 Functionality 
    VM #2: Server 2012 R2 with Exchange 2013 Standard (Not Yet Installed) Joined to ad.cosco.com domain
    VM #3: Server 2012 R2 with Exchange 2010 (Not Yet Installed) joined to ad.cosco.com domain
    These are probably not ideal conditions, but I have to work with what I'm given.
    Host server (2012 R2) is in work group mode.  Hyper V Installed with a VM of Server 2012 R2 and as a DC at a functionality level of Server 2012 R2.  I had intended starting at a lower functionality level and raising
    it later, but.... ya I forgot to change it.  If needed I can spool up a new DC with a lower functional level.
    DNS, AD and group policy is all jacked up on the 2003 DC so that doesn't matter, All user accounts are going to be created under the new domain.  The concern is migrating the mailboxes from Exchange 2003 on the old domain to
    Exchange 2013 on the new domain.  The client is going to provide CSV of the AD accounts that are still valid (a lot of accounts are no longer used or are from people that no longer with the organization.)
    I had some ideas, but I'm not sure if they will work.  This is something I have never done before (Senior Engineer Quit).
    My thoughts:
    - Establish a two way trust relationship between the two domains.
    - Create two VM's, one with Exchange 2010 and one with Exchange 2013 (They have a 2010 licence that was not used).
    - Create the users on the new domain
    - Use the double hop method from Exchange 2003 > Exchange 2010 > Exchange 2013 
    - Link Exchange accounts to the correct user accounts on the new DC.
    Can this be done cleanly? Am I going about this the correct way?  Any feedback would be GREATLY appreciated.
    Note: We are forced to use ad.cosco.com (Obviously not the actual domain name)

    Hi,
    Base on my experience, your idea is feasible.
    However, before getting started, you should note that Exchange 2010 (with any service pack or update rollups) is not (yet) supported to install on Windows 2012 R2. More details refer to the following link: 
    http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
    After all the preparations complete, you can refer to the following articles to migration exchange 2003 to 2010, then to 2013:
    Exchange 2003 to 2010 Cross-Forest Migration Step by Step Guide
    Exchange 2010/2007 to 2013 Migration and Co-existence Guide
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Can't connect to Exchange 2003 SP2 using BIS

    Hi,
    I'm a network administrator for a small company. We have a user with a Blackberry 8830, and they'd like to access their Exchange account from the device. We're running Exchange 2003 SP2.
    I attempted to set this up on the Blackberry and got the following error:
    "Cannot connect to email server or invalid server name. Please verify the Outlook Web Access URL. If the error persists, contact antarcticadigital.com (your email provider)."
    The user received an email with the following info:
    Your attempt to configure the BlackBerry Internet Service to deliver mail to your BlackBerry device from this email account was unsuccessful. This email provides instructions to help with the email account set up.
    You submitted the following information:
    Account Type:
    Outlook Web Access
    Email Address:
    [email protected]
    User Name:
    connectusdirect\person
    Password:
    ****** (For security the password is not displayed.)
    Mail Server:
    https://mail.xyz.com/exchange/
    [removed personal information]
    For historical reasons, our Windows domain name is connectusdirect, while the email domain is different (antarcticadigital.com).
    I've set this up before when I had a blackberry of my own, and it worked OK for me - so I'm not sure why we're having a problem with this user's account.
    On our mail server, I'm seeing the following in the IIS logs for the OWA site. These are coming from a RIM-controlled IP:
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 410 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 456 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 387 640 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /EWS/Exchange.asmx - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1753 832 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 376 823 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 874 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1848 1058 93
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 GET /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 148 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 GET /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 194 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 302 0 0 383 378 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 158 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 204 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1848 388 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 401 2 2148074254 357 219 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 401 1 0 345 265 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 200 0 0 1485 449 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak/ - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) sessionid=af524a8e-7c18-4926-a10e-803bf5cc70f8:0x0 - mail.antarcticadigital.com 404 0 0 387 472 78
    Does anyone have any ideas?
    Thanks,
    Richard

    Hello,
    I don't have any ideas yet but can chime in with "me too".
    A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
    One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
    Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
    An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

  • I need help with this script please ASAP

    So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
    The script (Sorry if it's a bit long):
    #------------Startup-------------
    display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
    set Lolz to (button returned of the result)
    if Lolz is "Cyaaaa" then
    killapp()
    else if Lolz is "Take the Quiz" then
              do shell script "say -v samantha Ok starting in 3…2…1…GO!"
    #------------Question 1-----------
              display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
              set A1 to (button returned of the result)
              if A1 is "Apprentices" then
                        do shell script "say -v samantha Correct Answer"
              else
                        do shell script "say -v samantha Wrong Answer"
      #----------Question 2--------
                        display dialog "Most children were taught
    to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
                        set A2 to (button returned of the result)
                        if A2 is "Bible" then
                                  do shell script "say -v samantha Correct Answer"
                        else
                                  do shell script "say -v samantha Wrong Answer"
      #------------Question 3---------
                                  display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
                                  set A3 to (button returned of the result)
                                  if A3 is "Great Awakening" then
                                            do shell script "say -v samantha Correct Answer"
                                  else
                                            do shell script "say -v samantha Wrong Answer"
      #-----------Question 4--------
                                            display dialog "_______ was
    a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
                                            set A4 to (button returned of the result)
                                            if A4 is "Ben Franklin" then
                                                      do shell script "say -v samantha Correct Answer"
                                            else
                                                      do shell script "say -v samantha Wrong Answer"
      #----------Question 5-------
                                                      display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
                                                      set A5 to (button returned of the result)
                                                      if A5 is "Land" then
                                                                do shell script "say -v samantha Correct Answer"
                                                      else
                                                                do shell script "say -v samantha Wrong Answer"
      #---------Question 6--------
                                                                display dialog "The first step toward guaranteeing these rights came in 1215. That
    year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
                                                                set A6 to (button returned of the result)
                                                                if A6 is "Magna Carta" then
                                                                          do shell script "say -v samantha Correct Answer"
                                                                else
                                                                          do shell script "say -v samantha Wrong Answer"
      #----------Question 7--------
                                                                          display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
                                                                          set A7 to (button returned of the result)
                                                                          if A7 is "Parliament" then
                                                                                    do shell script "say -v samantha Correct Answer"
                                                                          else
                                                                                    do shell script "say -v samantha Wrong Answer"
      #--------Question 8-----
                                                                                    display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
                                                                                    set A8 to (button returned of the result)
                                                                                    if A8 is "King James II" then
                                                                                              do shell script "say -v samantha Correct Answer"
                                                                                    else
                                                                                              do shell script "say -v samantha Wrong Answer"
      #--------Question 9------
                                                                                              display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
                                                                                              set A9 to (button returned of the result)
                                                                                              if A9 is "William/Mary/Glorius Revolution" then
                                                                                                        do shell script "say -v samantha Correct Answer"
                                                                                              else
                                                                                                        do shell script "say -v samantha Wrong Answer"
      #---------Question 10-----
                                                                                                        display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
                                                                                                        set A10 to (button returned of the result)
                                                                                                        if A10 is "Rights" then
                                                                                                                  do shell script "say -v samantha Correct Answer"
                                                                                                        else
                                                                                                                  do shell script "say -v samantha Wrong Answer"
      #---------Question 11------
                                                                                                                  display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
                                                                                                                  set A11 to (button returned of the result)
                                                                                                                  if A11 is "Ohio" then
                                                                                                                            do shell script "say -v samantha Correct Answer"
                                                                                                                  else
                                                                                                                            do shell script "say -v samantha Wrong Answer"
      #------Question 12---------
                                                                                                                            display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
                                                                                                                            set A12 to (button returned of the result)
                                                                                                                            if A12 is "George Washington" then
                                                                                                                                      do shell script "say -v samantha Correct Answer"
                                                                                                                            else
                                                                                                                                      do shell script "say -v samantha Wrong Answer"
      #---------Question 13-------
                                                                                                                                      display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
                                                                                                                                      set A13 to (button returned of the result)
                                                                                                                                      if A13 is "Ben Franklin" then
                                                                                                                                                do shell script "say -v samantha Correct Answer"
                                                                                                                                      else
                                                                                                                                                do shell script "say -v samantha Wrong Answer"
      #--------Question 14------
                                                                                                                                                display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
                                                                                                                                                set A14 to (button returned of the result)
                                                                                                                                                if A14 is "" then
                                                                                                                                                          do shell script "say -v samantha Correct Answer"
                                                                                                                                                else
                                                                                                                                                          do shell script "say -v samantha Wrong Answer"
      #-------Question 15-------
                                                                                                                                                          display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
                                                                                                                                                          set A15 to (button returned of the result)
                                                                                                                                                          if A15 is "Command an attack against French" then
                                                                                                                                                                    do shell script "say -v samantha Correct Answer"
                                                                                                                                                          else
                                                                                                                                                                    do shell script "say -v samantha Wrong Answer"
      #------TheLolQuestion-----
                                                                                                                                                                    display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
                                                                                                                                                                    set LOOL to (button returned of the result)
                                                                                                                                                                    if LOOL is "Mr.White" then
                                                                                                                                                                              do shell script "say -v samantha Congratulations…you…have…common…sense"
                                                                                                                                                                    else
                                                                                                                                                                              do shell script "say -v alex Do…you…have…eyes?"
                                                                                                                                                                              #------END------
                                                                                                                                                                              display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
                                                                                                                                                                              set endmenu to (button returned of the result)
                                                                                                                                                                              if endmenu is "I did!" then
                                                                                                                                                                                        do shell script "say -v samantha Your awesome"
                                                                                                                                                                              else
                                                                                                                                                                                        do shell script "say -v alex Go outside and run a lap"
                                                                                                                                                                              end if
                                                                                                                                                                    end if
                                                                                                                                                          end if
                                                                                                                                                end if
                                                                                                                                      end if
                                                                                                                            end if
                                                                                                                  end if
                                                                                                        end if
                                                                                              end if
                                                                                    end if
                                                                          end if
                                                                end if
                                                      end if
                                            end if
                                  end if
                        end if
              end if
    end if

    Use code such as:
    display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
    set A1 to (button returned of the result)
    if A1 is "Apprentices" then
    do shell script "say -v samantha Correct Answer"
    else
    do shell script "say -v samantha Wrong Answer"
    return
    end if
    #----------Question 2--------
    display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
    set A2 to (button returned of the result)
    if A2 is "Bible" then
    do shell script "say -v samantha Correct Answer"
    else
    do shell script "say -v samantha Wrong Answer"
    return
    end if
    (90444)

  • Need help with home work see what you got

    1. The MEMBERS table has the phone number broken into three fields:
       CountryCode - e,g., '1' for the United States
       AreaCode - e.g., three digits for the United States
       Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
       Any or all of the fields may be missing (null) or blank or contain only spaces.
       Write a T-SQL statement to concatenate the three fields into a complete phone number
       with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
       If no Phone is present, return a blank string.
       If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
    2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
       For this purpose, each row contains:
       PersonID - unique member identifier
       Campaign - name of war/conflict
       Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
       E.g., PersonID    Campaigns
             12345678    Global War on Terror, Iraq, Afghanistan
    3. The MEMBER_STATISTICS table contains one row per post.
       For this purpose, each row contains the post's:
       Division - a way of grouping posts by their member size
       Department - the state in which the post is located
       PostNumber - unique post identifier
       Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
       Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
       Rank them by highest to lowest reinstated count.
       Return their Division, Rank, Department, PostNumber, Reinstated

    I got 3 home work questions think i have the first two need help with the last one please.
    Kinda stuck on #3 hard I can see data not sure witch to sum or count?
    1. The MEMBERS table has the phone number broken into three fields:
       CountryCode - e,g., '1' for the United States
       AreaCode - e.g., three digits for the United States
       Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
       Any or all of the fields may be missing (null) or blank or contain only spaces.
       Write a T-SQL statement to concatenate the three fields into a complete phone number
       with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
       If no Phone is present, return a blank string.
       If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
    ANSWER******************
    Notes: created a funtion to format the phone 
    Then used the this function in a select to concatenate Phone 
     CREATE FUNCTION dbo.FORMATPHONE (@CountryCode int, @AreCode int, @Phone VARCHAR(14))
    RETURNS VARCHAR(14)
        AS BEGIN
           DECLARE @ReturnPhone VARCHAR(14)
           DECLARE @NewPhone VARCHAR(14)
    -- Note case sets newphone to null if phone null or '' also to see if phone has '-' in it if not inserts into newphone
           case 
                when @Phone is null or @Phone  = ''
                   Then SET @NewPhone = Null
                when @Phone = substring(@Phone,4,1)='-'
          Then SET @NewPhone = @Phone 
           else  
                SET @NewPhone = substring(@Phone,1,3)+'-'+ substring(@Phone,4,4)
           End     
           case 
                when @NewPhone is null then SET @ReturnPhone = @NewPhone            
           elese case
                    when @AreCode is null or @AreCode = '' then SET @ReturnPhone = @NewPhone
                 else 
          SET @ReturnPhone = @CountryCode + '(' + @AreCode + ')' +  @NewPhone
                END
           END
        RETURN @ReturnPhone 
    END
    select dbo.FORMATPHONE(CountryCode,AreCode,Phone)
    from MEMBERS 
    2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
       For this purpose, each row contains:
       PersonID - unique member identifier
       Campaign - name of war/conflict
       Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
       E.g., PersonID    Campaigns
             12345678    Global War on Terror, Iraq, Afghanistan
    ANSWER******************
    SELECT      PersonID,
                STUFF((    SELECT ',' + Campaign AS [text()]
                            FROM PERSON_CAMPAIGN 
                            WHERE (PersonID = Results.ID)
                            FOR XML PATH('') 
                            ), 1, 1, '' )
                AS Campaigns
    FROM  PERSON_CAMPAIGN Results
    3. The MEMBER_STATISTICS table contains one row per post.
       For this purpose, each row contains the post's:
       Division - a way of grouping posts by their member size
       Department - the state in which the post is located
       PostNumber - unique post identifier
       Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
       Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
       Rank them by highest to lowest reinstated count.
       Return their Division, Rank, Department, PostNumber, Reinstated

  • Need help with my ipod

    Hi,
    I need help with my ipod. It alll started when I used TechTool Pro to wipeout data for my ipod and after finishing the wipeout, I restart my computer and after the restart I was ask by my computer whether to ignore, erase or eject the HD and I choose eject and what happen next is that I have a apple logo on my ipod and my computer now cannot recognises my ipod, and the apple logo just stay there. I am using a 3rd gen ipod.
    with regards and thank you
    Chris
    PowerMac G4 Cube   Mac OS X (10.4.8)  
    PowerMac G4 Cube   Mac OS X (10.4.7)  

    Andrew,
    The iPod and iTunes are not compatible with Windows ME and the minimum requirements are Windows 2000 with SP4 or XP with SP2 (although I use several iPods and don't have SP2).
    If you can't upgrade to one of these, then you can use the iPod with ME if you are prepared to fiddle around a little. However, you won't be able to use iTunes.
    See this.
    Guide to iPod and Windows ME
    You can use iPods purchased in the USA here in the UK. Our family uses 3 such iPods.
    You can also use the iPod on any number of computers as this document explains.
    Using iPod with multiple computers
    Whoever gave you you all this wrong info deserves to be shot!
    Just one more thing Andrew. Please start your own topic in future instead of jumping in an interrupting someone else's with an unrelated query. It's know here as "threadjacking" and is against the discussions Terms of Use.
    Good luck with ME!

Maybe you are looking for

  • Please Help, my CC isn't connecting and nothing worked!

    Hello, The title sums it up... It is impossible for me to load anything but the CC desktop app. I can't connect my device to any of the servers ( such as "ccmdld.adobe.com 443", and so on) and no one can tell me how I could fix this. Normal I'm brows

  • Can't turn launch in camera raw off

    I use ACR to process many images, both RAW and JPGs and have the PS3 preferences set to open in ACR automatically. I want to turn off the option to batch process files, but unchecking the preference and trashing some preference files has not worked.

  • Itunes not syncing "newly added playlist" on my iphone 5!

    I am running IOS 7.0.4 (11B554a) on my iphone5 16Gb, modem firmware 5.02.00. i have latest iTunes (V. 11.2.2.3). Well, as usual i add new songs to my iTunes library, which also show up in 'newly added' playlist in iTunes. So over syncing, it should a

  • I cant sign in with my ipad to face time or imassege

    Hi i cant access or sign in to face time or imassege in mini ipad

  • Display of Key Figure's Names in the Navigation Panel

    Hello all, Is anyone know how to display the key figure's names list in the navigation panel, as in that eLearning presentation – https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d049b14f-775c-2a10-9ea2-9d670feaf2fe (I'm talking ab