Need Help with FCP7 import and plug in question.

Hello,
I just registered and would like to ask two questions. Everything else I'll use the search function for but I need the answer right away.
Ok First question. I have a mac pro at home and a intel macbook both with FCS4 during the holiday season I'd like to work on a project on my laptop. Now I have all my files on a 2.0 USB drive(I know its not that fast for video) but this is only temp. while traveling. I'm trying to figure out why it wont import the files into another project. Even when I'm at my home Mac Pro when I try to import a projects footage into another project it doesn't read it. This comes up
"File Error: 0 file(s) recognized, 0 access denied 254 unknown"
But all the files will work in the project that it was originally captured too.
If this helps the codec is sonys HDV 1080 60i converted to Apple ProRes 422(HQ) which I found out I should only use the regular Apple ProRes 422. I'm stuck now b/c I cannot import the files into a new project to work in on my laptop. Plus my Macbook doesn't have Firewire800 so I have no way to get the footage from tape to my laptop other then my USB Hard Drive.
I also have problem importing the files in Motion and Cinema Tools they also are not recognizing the files which is getting me upset since they are FCP7 generated files after I convert them to ProRes.
Whenever I try to import/use the files in anything other the original project they are grey'ed out.
I'm also confused on how to import effects plug-ins I've downloaded effects from apple only to have now directions to import them into the program.
Sorry for the Noob questions I'm a film student learning FCP7 by myself so I have the upper hand come next semester. Thanks in advance.

Can't tell for sure but it sounds as if the drive is not properly formatted, or you do not have correct read/write permissions for it. There is no way you can use this drive with HQ video. You're going to get into problem if you even try.

Similar Messages

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • Need help with Airport Express and so on.

    Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
    My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

    DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
    The AirPort Extreme base station (AEBS) is a router so it will do what you need.
    You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

  • Need help with Page Layout and Background Scaling

    hello, everyone.
    I am in the process of designing a new website for myself,
    and while I was researching nicely designed pages to use as
    inspiration, I stumbled upon this site:
    http://www.jeffsarmiento.com/
    obviously, the design is very impressive, but it also
    incorporates a lot of web mechanics that I have been trying to
    figure out, so I will use this page as an example.
    one thing I need help with is backgrounds. as you can see in
    the posted website, the creator used a seamlessly tiled paper
    texture to display the bulk of his content on. also make not of the
    pattern that is located to the left of the paper texture. how do I
    create seamless backgrounds like this that will scale to fit any
    amount of content or any resolution? I can't imagine that the guy
    that made that site created a new size background every time he
    made an update, so there has to be an easier way.
    the second thing that I am having trouble with is general
    site layout. I have read that most sites used series of invisible
    tables to organize there content, but when I open the source of
    this page in dreamweaver, he was using something different. div
    tags? should I be using these? who do I use them? are there any
    general layout tips that someone could pass on to me? perhaps a
    link to a good tutorial?
    please help me. i am very confused.
    thanks so much.

    IMO not a good site to emulate. To wit:
    Top background image:
    http://www.jeffsarmiento.com/images/bg-top.jpg;
    745px
    x 350px 137K
    Main background image:
    http://www.jeffsarmiento.com/images/bg-tile.jpg;
    745px x 950px 130K
    Total page size: 454K (Check here:
    www.websiteoptimization.com)
    Website usability experts routinely recommend a maximum page
    size of ~80K
    Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
    they suggest,
    "You speak about yourself approximately 0,003 times as often
    as you speak
    about your customers. Might that have an impact on your
    effectiveness?"
    That is 100% consistent with the #1 Web Design mistake:
    "Believing people
    care about you and your web site." or to phrase more
    expansively, "Our site
    tries to tell you how wonderful we are as a company, but not
    how we're going
    to solve your problems."
    www.sitepoint.com has some excellent books on making a
    website actually
    attractive and usable at the same time.
    Walt
    "beWILLdered_" <[email protected]> wrote in
    message
    news:[email protected]...
    > hello, everyone.
    > I am in the process of designing a new website for
    myself, and while I was
    > researching nicely designed pages to use as inspiration,
    I stumbled upon
    > this
    > site:
    >
    http://www.jeffsarmiento.com/
    > obviously, the design is very impressive, but it also
    incorporates a lot
    > of
    > web mechanics that I have been trying to figure out, so
    I will use this
    > page as
    > an example.
    > one thing I need help with is backgrounds. as you can
    see in the posted
    > website, the creator used a seamlessly tiled paper
    texture to display the
    > bulk
    > of his content on. also make not of the pattern that is
    located to the
    > left of
    > the paper texture. how do I create seamless backgrounds
    like this that
    > will
    > scale to fit any amount of content or any resolution? I
    can't imagine that
    > the
    > guy that made that site created a new size background
    every time he made
    > an
    > update, so there has to be an easier way.
    > the second thing that I am having trouble with is
    general site layout. I
    > have
    > read that most sites used series of invisible tables to
    organize there
    > content,
    > but when I open the source of this page in dreamweaver,
    he was using
    > something
    > different. div tags? should I be using these? who do I
    use them? are there
    > any
    > general layout tips that someone could pass on to me?
    perhaps a link to a
    > good
    > tutorial?
    > please help me. i am very confused.
    >
    > thanks so much.
    >

  • Need help with saving data and keeping table history for one BP

    Hi all
    I need help with this one ,
    Scenario:
    When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
    So i need to know how to have SBO fullfil this requirement ?
    Hope it's clear .
    Thanks
    Bongani

    Hi
    I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
    I'm using South African localization.
    Thanks

  • Need help with show/hide and layers moving

    I'm more of a designer, so I don't know code or CSS well at
    all. I'm doing an online portfolio for a class and need help with
    layers not staying in place in different browsers. The portfolio is
    created with a table, but I wanted to use the show/hide function
    for thumbnails of work. Are layers the only way you can use this
    function? I read layers don't work well with tables, so how else
    can I make it so when you mouse over a thumbnail, the larger image
    appears in another cell?

    > I don't know code or CSS well at all.
    That's unfortunate.
    > layers not staying in place in different browsers.
    Layers don't move. But the rest of your page does.
    Before you get too wrapped up in layers, though, please read
    this -
    http://www.great-web-sights.com/g_layerlaws.asp
    They are not good when be used as a primary layout method.
    > I read layers don't work well with tables
    They work fine with tables - but you have to understand both
    tables and
    layers to use them.
    Why not show us your page, so we can see what you are
    struggling with?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Bobbi67" <[email protected]> wrote in
    message
    news:ertd9h$h3m$[email protected]..
    > I'm more of a designer, so I don't know code or CSS well
    at all. I'm doing
    > an
    > online portfolio for a class and need help with layers
    not staying in
    > place in
    > different browsers. The portfolio is created with a
    table, but I wanted to
    > use
    > the show/hide function for thumbnails of work. Are
    layers the only way you
    > can
    > use this function? I read layers don't work well with
    tables, so how else
    > can I
    > make it so when you mouse over a thumbnail, the larger
    image appears in
    > another
    > cell?
    >

  • FCP Novice needs help with video quality and FCP 5!!

    Hi,
    I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
    I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
    I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
    The final footaage looks like an old VHS recording that's a year or two old!
    Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
    Is there some presets I should be working to?
    I'm tearing my hair out! Help!

    Hi Guys,
    thanx for your replies.
    here's the latest:
    Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
    When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
    Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
    I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
    Does this make sense to you guys or am I still doing something very wrong?
    Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
    Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
    any more help guys would be greatfully appreciated.

  • Deperately need help with my iPod and Pioneer Car Stereo

    I just bought Pioneer's newest deck from Best Buy. The Model number of the deck is DEH-P6800MP. It has a mini jack (2.5 mm stereo jack) on the front of the deck that you can plug your iPod into. I purchased the little adaptor that allows me to just plug the iPod in using the Headphone Jack. It works great. I can use my click wheel to navigate the menus and the sound is awesome...except for one thing, it only plays through the right side speakers. I thought maybe the Fader needed to be adjusted on the deck but everything is dead center. I thought maybe something was wrong with the deck but the Tuner and CD player both work perfectly. I even tried using different cables with no success. When I called Best Buy they told me they were familiar with the problem and to download the newest software for my iPod and it should fix it. It didn't! I am so frustrated by this. I paid alot of money for this deck thinking I wouldn't have to buy any additional interfaces and would never have to deal with an FM transmitter again. Can anybody help?
    Fifth Generation 60 Gig iPod   Windows XP  

    After plugging my walkman in and experiencing the same problem, I figured it must be the adaptor. I went to the local Radio Shack and picked up a mini-jack adaptor that was indeed Stereo. Thankfully it worked!!! I can't tell you how happy my family and I are to have all our music available in the family vehicle. Thanks for your help and @#$% Best Buy for selling me not one but two car stereos under the false pretense that I wouldn't need anything else to hook-up my iPod and then not having any idea how to help me when I needed it.
      Windows XP  

  • Need help with FCE import (1920x1080)

    I'm new to FCE and unfamiliar with the settings and format.  I bought the software in order to use one third party filter on a particular four minute project.  I thought this would be easy (I'm not even editing the show in Final Cut, just applying a filter.)  But  I've spent literally days watching tutorials and reading discussions trying to get settings and file formats right for a simple four minute project.
    Here's my situation.  I created a video in Photo to Movie.
    I exported it with the following settings:
    HDV 1080i
         Dimensions: 1920 x 1080
         Video
              Compression: Apple Intermediate Codec
              Quality:  Medium
              Frame rate: 29.97
              Preset: HDV 1080i
         Sound:
              Format: Integer (Big Endian)
              Sample rate: 48.000 khz
              Sample Size: 16-bit
              Channels: Stereo (L R)
    Initially I was working in version 4 and could only work with the 1440 x 1080 sequence settings.  The film looked great in FCE but rendering was giving me poor image quality.  I thought this might be a problem with sequence settings.
    I just updated to 4.0.1 so that I could work with 1920 x 1080 dimensions.  In Easy Setup I selected AVCHD  Apple Intermediate Codec 1920x1080i60. 
    But when I drag my Quicktime movie into the browser it's listed as 1440 x 1080.  I'm puzzled as I'm sure I formatted it at 1920x1080 and if I
    use command+i on the .mov file it shows as 1920x1080.
    I'm completely confused.  I have MPEG Streamclip and Iskysoft media converter if that's useful.
    Can anyone tell me where I'm going wrong?
    In the initial export of my Photo to Movie project?
    In my import into FCE?
    Both?
    I'm far behind my deadline and really need some help.
    Thanks, in advance, for any assistance.

    Hi Tom, you are right, of course.  The inspector says:
    Apple Intermediate Codec, 1440 x 1080 (1888 x 1062)
    Millions 16-bit integer (Big Endian)
    Stereo (L R)
    48.000 kHz
    FPS 29.97
    Playing FPS (Available while playing.)
    Data size: 2.66 GB
    Data rate: 89.58 mbits/s
    normal size: 1888 x 1062
    current size: 1888 x 1062
    I won't ask you to explain why I fed in one resolution and ended up with another or why the file shows up in the  preview menu as being 1920x1080.  Obviously I don't understand these basic concepts.
    The more immediate question is--which settings should I be using to import into FCE (or should I be converting this to something else before it's imported into FCE?)
    Finally, when it's time to export (after applying the filter) which settings should I use?
    I need a high quality version that can be put on a DVD and also something that can be used on Youtube. (The more urgent need is for the You Tube file).  
    I truly hate to bother you with all this, but it's remarkable how many different online tutorials I've consulted and they all differ.  I've probably spent thirty hours this week trying different approaches (insane).  Each asserts that this or that format and setting is the "best" but no one seems to agree.    And none have entirely worked so far.  (I even had a professional come to my house this morning to help and he told me all my settings looked fine--obviously not true.)  Ultimately I need to understand the underlying concepts (and should have invested my time this way) but in the meantime, I urgently need to get this project out. 
    I saw in other posts that you have written about FCE.  Is there a particular title I should pick up to get a good overview of these concepts?  And, in your opinion, does it make sense to study FCE when everything seems to be moving toward the Pro X software?  I ask these additional questions, in part, for the benefit of others.  I'm sure I'm not the only layman out there who is struggling with this learning curve.  Thank goodness for individuals like you.

  • Need help with Boot Camp and Win 7

    I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp.  I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
    I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1.  That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
    Thanks.
    Mike

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

    Hi there,
    So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
    Here's my current system profile:
    iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
    MacOS 10.6.1 Never updated.
    3.06 Ghz Intel Core2 Duo
    4Gb RAM
    LaCie Big Disk via FireWire 800
    Internet access via Ethernet port (cable)
    And here's The Issues Log:
    – Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
    – 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
    – After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
    – 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
    – Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
    Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
    Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
    Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
    Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
    Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
    Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.  
    As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
    Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
    I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
    Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
    1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
    2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
    3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
    4. Replace HD for a brand new one and either step 1 or 3.
    5. As a complement, I'm thinking of adding more RAM.
    Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
    Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
    And if it fits best in any other forum, please also let me know.
    Cheers and thanks in advantage.

    You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Need help with load balancing and DNS proxy

    Hi,
    I need help on how to configure my router so it will work with my DNS proxy and load balancing.
    I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
    The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
    In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
    DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-0.0.0.0)WAN2
    Any help or suggestions are appreciated.
    Alex

    Good solution though. That's probably the only way you could do true Load Balancing anyway.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Need help with load balancing and DNS proxy -Repost

    Hi,
    I need help on how to configure my router so it will work with my DNS proxy and load balancing.
    I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
    The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
    In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
    DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-​0.0.0.0)WAN2
    Any help or suggestions are appreciated.
    Alex

    Good solution though. That's probably the only way you could do true Load Balancing anyway.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Need help with frozen Archive and Install

    I'm trying to run an archive and install for my intel iMac, OS 10.4.11. I get through the first disk fine, but after I put in the 2nd install disk, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried restarting, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. Apple even sent me a new install disk 2, and the same thing happened, so I know it's not the disk. Is there a way to push past this?
    I did a disk utility repair and it said everything was fine.
    WZZZ suggested a custom installation, but I haven't tried it yet because I'm worried I might lose the data on my hard drive. (Stupidly) none of it is backed up. Any advice? Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
    If not, is that the best thing to do?

    Hi there, WZZZ is one sharp guy, go for it, (known him since he was knee high to a Grasshopper!
    Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
    At worst we should maybe only have complications with several Previous System Folders, but after forcing shutdown reboot do what WZZZ pointed to...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
    http://support.apple.com/kb/HT1442

  • Need help with hearing Skype and Steam chats at th...

    When im using skype and using steam (a gaming app) i cant hear my skype friends through my headphones and i need help
    Subject/title expanded from "Help."

    Hi, Natasharocks11, and welcome to the Community,
    I could not detect from your post precisely what the problem with your account is.  Please kindly post back with details as well as any error messages you may be seeing. 
    Thank you,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Maybe you are looking for

  • Having trouble with transfering music in Vista

    Never had any of these issues in XP. At first, I thought it had to do with Anapod but I'm experiencing the same on Itunes... 1. The player will disconnect/reconnect in mid transfer slowing down the transfer 2. If I send more than just a couple of fil

  • The 'import' statement

    Dear Friends and fellow Javatizens.... I have a package called 'Tester'. In this package i have two classes caled 'Fruit' and 'Food'. In the 'Fruit' class I have an integer varibale 'i' which is assigned the value of 5. Now create another class calle

  • Accessing online help in Sql developer

    For some reason I have lost the ability to access Help in Sql Developer. Nothing happenx when I click on the "Table of Contents" in the Help menu. I un and re installed Sql Developer, but thie problem remains. My OS is vista 32 bit. Thanks Mewbie

  • A question about VM

    Hi,everybody My question is how does OnCard VM works. It interprets CAP, or compiles and then executes? If OnCard VM is a interpreter, how can it ensure the speed of performance? Thanks in advance.

  • I need to create a pie with a cut out of it...

    I need to create a clean, crisp logo as follows: Even though it is a transparent background, there is a white sporatic outline around the type and the circle.  I need to create one pie where the cout out portion is transparent and another where it is